Hi Greg, very informative video. lots of things to take into consideration while you are restoring your car. Keep up the good work. Lot of good folks into restoring cars and its nice to find fellow restorers who will share experiences with others.
thanks man i just bought a 1975 olds royal convertible that was in a storage unit for 15 years the guy who owned it stripped the paint and didnt primer it and also took bolts out of the top i sent the top bars to florida and just got them back on the top works the body is awsume 73 thousand miles 350 cu in red with white leather interior yes leather in great shape i need bumbers there were no bumbers in the storage unit looks like i might be taking a road trip thanks again very helpfull
Very good demonstration Greg Hicks very good I truly enjoyed it I got more informed about my 1975 Buick LeSabre convertible custom mostly all the GM cars are the same as far as the motor locations it’s under the Rear seat correct thank you very much
Thanks for this video man. I couldn't find nothin on TH-cam. I was gonna take this to the shop and get it looked at but this video gives me the confidence to do it myself. Looks simple enough. I'm getting a 75 caprice next week. I'll order the motor,relay, and L & R cable. And swap it out. Hopefully that'll do the trick.
Snake Black are you talking about the bow that connects to the windshield? if so have you reset your motors on the sides so they are working the same speed. then it's two adjustable screws on the elbows that will make them lay down flatter. What's you email I can send you a pic of the adjustment screws. also it's a rubber seal that goes in the front bow, that keeps water out.
Very appreciative of video, I just purchased a 1973 Grandville Convertible...needs a floor, trunk floor pan, new top rear light lens etc...Would like to purchase all new parts but may have to holla at leon...Is that rack hard to disassemble and reassemble for chroming ?
Great break down!! First helpful video I found for exactly what I needed to do. I can here my relay clocking but nothing happening. Wondering if that means bad motor?
Can you please do a video on how the rain gutter the the rear well works? I'm getting water in my trunk and I've already changed out the trunk seal. Thanks for your videos! You're good!
How’s it going, brother? I got a question about my Top. I have a 72 Pontiac Catalina the top is in good condition but it don’t go up or down automatic You have to let it up and down manually the guy that I got it from said that he unhooked the relay Regulators so not sure if the relay is not working or something else is wrong. Just need your input on that thanks.
hey ..it aint gonna hurt it...but if you can hear the motor running your relay is good. ..disconnect the cables from the actuators run the motor. ..if the cables are turning. ..there lies your problem. ..get someone to hit switch while u watch the ends to see if the turn
Hey brother I have a 72 Granville top works, but it’s not going forward enough to match the pivot points to lock it down. Windows don’t seal off. What’s your thoughts on this?
Thank you Greg for the video, i have my 71 eldorado top that has hard time to come back up, it goes down slowly but surely, but i have to help it when i bring it up, i didn't know where to look, now i understand the concept. However i can't find the part1 of your video
My switch burned up. The top was working. I changed the switch and check the fuses and it won't work. I'm getting power to the switch and it clicks behind the seat. I have a 75 delta 88. What should I do next
greg hicks another problem I have is, the people that put the top on before I bought the car, put the material too tight on the back bow on the drivers side and it’s ripping near the window. The top shop in Columbia SC says I need a whole new top
@@sportiessc don't need a top just the rear curtain... it should be a 2 piece...the top ...then what they call the rear curtain which where the plastic or glass window is sewn to...that goes on first then the top is stapled glued on 2nd
greg hicks I wish I could send a picture to you. I can see the inside of my car from the outside with the top up. It’s ripping at the frame behind the quarter panel window
make sure u connected the motor and transmission together properly....u probably gonna have to go through the system and check everything. .. for stripped transmission gears,cables ends both sides gotta make sure the transmission nylon gear where the cables fit into are not stripped too...,actuators binding
Yea I did what u said about the transmission and put new grease in it and I replace bothe cables only thing I haven't done was replace the relay and check th gears on the side but since the trans was turning period Ima change the relay
i bought a new motor off ebay i thought was hydro electric. ..might b mistaken. .ive bought so much from them....im gonna get a custom color top,so i don't know if they got to install it or not...if i end up with astock color like black or white. ..ill do it myself. ..already got the pads and everything else
my front bow pins are not falling in place,how do i adjust it to go forward more. i adjust the latch to hold it down but guide pins are not in the hole
greg i have a caprice with the siccor top that works. but the elbow area are scraping on the way up and down. what do you think is my problem? and what do you suggest for the repair.
greg hicks so I got an update on my 75 caprice: I changed the motor,relay, and both cables. So now my top drops back with ease...now when I go to lift the top back up it stops about 1/3 of the way up and I have to get someone to help me. So I'm assuming it is the switch?? Would you happen to have a video on disassembling the dash?
Derrick Crenshaw no haven’t figured it out yet. I changed the motor and relay. Changed the gears and both cables. Still goes down good. Comes up for a few seconds and stops still.I’m ordering a switch this week.hopefully that’ll do it
My top goes up and down fine but the driver side comes about 2 inches too far to close. Even if I try to pull it down I still can’t latch it. What should I check?
Could be a number of things...but I would start with the electrical side of the motor to relay since relay seems to be working...if you could bypass relay try that too..might be in the relay... see if the motor is turning ..if is could be stripped gears
Thanks for the part 2 video Greg. Where is part 1 video? Don't see it on TH-cam any longer :( I about to remove and replace a top on a 1972 Buick LeSabre Custom. This will help a novice like me.
So when I drop my top the arms start to touch and I have to pull them apart to drop it all the way down, this also happens when I put it back up! The plastic guide the goes on the 2nd bow I think that's what it's called has broken off as well. Do you think it's the guide that has the arms touching now, when I drop the top and put it back up? Or do you think it could be something else?? Also before I lock the top when it's up the left side is lower then the right side by about 6 inches
Thanks for sharing your video! Do you have an email where I can discuss what I need for my convertible top? It does not have a motor, cables, or a relay . I'm not in Virginia to go to Leon's auto parts. Is there a catalog where I can order these parts from?
I live in Fort Lauderdale fl and been going through hell trying to find a scissor frame top for my 71 Buick skylark. Do you know where I can find one ?
Hi, I leave in belgium, I have a Buick le Sabre convertible 1974 ,I want To ask You i We do to adjust the 2 câbles who goes To te motor, because my top goes in diagonal when i try To open. I remove the câble from the motor but the ride Side go first. Sorry for my english, But i leave in a french country.
I changed the fuse new motor and relay switch and checked the fuse but my relay makes a clicking noise when I got the switch but still no power what could be the problem
@@colbylovell6053 mine is doing the same , is there a way to let the top up manually? I just got mine and I let the top down and then I tried to let it up and it just went blank on me, I still here the click . It was easy to go down , and it struggled to go up and went blank after .
WHats up guys, Im working on a 75 caprice with the same issues. Although I have not replaced any parts yet. Top goes down only if I start stop start stop. Going up, I have to completely pull it up by hand while holding the switch. How do I know if its the motor or transmission?
go to ebay ...put in your model car plus convertible. ..should pop up....i think they use about the same pages for all the scissor tops regardless of year make model lol
I found a place! It's in Florida the website is topsdown.com free 2 day shipping 225.00 hydro has them but they don't sell it on the website and they offer a rebuild service for 125.00
R u gonna put the top on yourself or take it to a shop? Because I'm stationed up here in Va beach and it's only like 2 places down here and they knocking heads off wit the prices
my top worked i was tryn to adjust it I heard 2 pops now one side works looks like one of the actuators not engaging .What do you think ? 1972 buick lesabre scissortop
PLEASE HELP I have a 1975 Pontiac Grandville Convertible top was working just fine and just stop working out the blue I have got a new convertible top switch changed all the fuse's new relay and left and right cable top still don't work motor not spinning at all I'm lost at this point the clicking from the relay I know it working motor I had tested by carquest and its new its working spinning both sides just fine have the dash out checking everything I'm not sure what else to do but have a shop fix it and over charge me ON PARTS AND LABOR please help anyone
Cooling man bro my 72 delta 88 top was working fine but only one side was going yo you had to manipulate the passenger side to it to punk ass mechanic now nothings working I followed your video relay is clicking and the passenger side cable is snapped (tried to jb weld just to see if that would work still no movement)... need help bro
Hi Greg, very informative video. lots of things to take into consideration while you are restoring your car. Keep up the good work. Lot of good folks into restoring cars and its nice to find fellow restorers who will share experiences with others.
Appreciate your tips I have 1973 delta my top stop working and all I needed was the relay thanks
thanks man i just bought a 1975 olds royal convertible that was in a storage unit for 15 years the guy who owned it stripped the paint and didnt primer it and also took bolts out of the top i sent the top bars to florida and just got them back on the top works the body is awsume 73 thousand miles 350 cu in red with white leather interior yes leather in great shape i need bumbers there were no bumbers in the storage unit looks like i might be taking a road trip thanks again very helpfull
Very good demonstration Greg Hicks very good I truly enjoyed it I got more informed about my 1975 Buick LeSabre convertible custom mostly all the GM cars are the same as far as the motor locations it’s under the Rear seat correct thank you very much
Great video THANK YOU for filming a clean bright and focused video! it helps 110%
Thanks for this video man. I couldn't find nothin on TH-cam. I was gonna take this to the shop and get it looked at but this video gives me the confidence to do it myself. Looks simple enough. I'm getting a 75 caprice next week. I'll order the motor,relay, and L & R cable. And swap it out. Hopefully that'll do the trick.
Mr hicks
your 1st video help me a great deal. I used it to replace my motor and top parts great good.
TheRealB2B Cardio Work-Out my front bow not falling in place water coming in how to i adjust that
Snake Black are you talking about the bow that connects to the windshield? if so have you reset your motors on the sides so they are working the same speed. then it's two adjustable screws on the elbows that will make them lay down flatter. What's you email I can send you a pic of the adjustment screws. also it's a rubber seal that goes in the front bow, that keeps water out.
Thanks for this walkthrough on this. Now I know how to troubleshoot my 72 Catalina's roof!
thanks man im fixing a 75 caprice and i was stumped on the top this video broke it down step by step
Thanks real good info if my top stops mid way going up does that means the motor is going bad it was working fine
Great video, just got a 1973 Grandville Convertible. Top works fine, for now, when it does not, I will know how to fix it.
Very appreciative of video, I just purchased a 1973 Grandville Convertible...needs a floor, trunk floor pan, new top rear light lens etc...Would like to purchase all new parts but may have to holla at leon...Is that rack hard to disassemble and reassemble for chroming ?
Great video Greg. Thanks bro
Great break down!! First helpful video I found for exactly what I needed to do. I can here my relay clocking but nothing happening. Wondering if that means bad motor?
Can you please do a video on how the rain gutter the the rear well works? I'm getting water in my trunk and I've already changed out the trunk seal. Thanks for your videos! You're good!
I finally fixed my top thank you i think i watch this video 100 times...lol
Thanks Greg very helpful video
On my 1975 caprice convertible,when i hit the switch for the top,it clicks. What do i need to replace?
Mine is doing the exact same
Some good info, thanks for sharing!
Hi, nice video. Can you make a video about adjustment of the scissor top?
Beautiful job on this car! Do you have any updates? Is it finished?
How hard is it to take apart the rack for chroming ?
How’s it going, brother? I got a question about my Top. I have a 72 Pontiac Catalina the top is in good condition but it don’t go up or down automatic You have to let it up and down manually the guy that I got it from said that he unhooked the relay Regulators so not sure if the relay is not working or something else is wrong. Just need your input on that thanks.
How do I change and replace convertible top latch on driver side. On a 1972 Pontiac Grandville Convertible?
My top goes up and down fine I’m wondering how to adjust it. It stops 6” above the windshield and is hard to latch down.
Did you find anything?
did you finish the car
hey ..it aint gonna hurt it...but if you can hear the motor running your relay is good. ..disconnect the cables from the actuators run the motor. ..if the cables are turning. ..there lies your problem. ..get someone to hit switch while u watch the ends to see if the turn
Thanks for the video....greatly appriciated
I wish my floor looked that well
Hey brother I have a 72 Granville top works, but it’s not going forward enough to match the pivot points to lock it down.
Windows don’t seal off.
What’s your thoughts on this?
Also, I'd like to see how you installed those speakers in the rear quarter panels!
Where are you located?
Any updates on the ride bro? U get it all together? Great video man.
Hey you still do convertible tops
Want to add...that the fuse that i speak of is actually a 30 or can be a 40 amp fuse RELAY.. hard to find in auto parts store but are on line
Thank you Greg for the video, i have my 71 eldorado top that has hard time to come back up, it goes down slowly but surely, but i have to help it when i bring it up, i didn't know where to look, now i understand the concept. However i can't find the part1 of your video
awesome video man thanks
What is the part called in the truck at the base of the top that stops the water from leaking around the back side of the top
👍🏽Thanks Greg. You're a blessing to me and my 71 Grand Ville convertible.
Can the top B go up and down manually is there a lever that lets it go manually
Got to disconnect the cables...but you gonna need two people to to manually use it..frame is heavy
@@greghicks7532 ok thanks
How do you align the frame over the window
My switch burned up. The top was working. I changed the switch and check the fuses and it won't work. I'm getting power to the switch and it clicks behind the seat. I have a 75 delta 88. What should I do next
Do you have the wiring diagram or can you help me with wiring the top motor?
I'm getting water in my trunk when it rains. Do you have a video on the rain apron, and how to check for leaks? I already replaced my trunk seal.
It's an aftermarket rain gutters you can buy that direct the water to the quarters
greg hicks another problem I have is, the people that put the top on before I bought the car, put the material too tight on the back bow on the drivers side and it’s ripping near the window. The top shop in Columbia SC says I need a whole new top
@@sportiessc don't need a top just the rear curtain... it should be a 2 piece...the top ...then what they call the rear curtain which where the plastic or glass window is sewn to...that goes on first then the top is stapled glued on 2nd
greg hicks I wish I could send a picture to you. I can see the inside of my car from the outside with the top up. It’s ripping at the frame behind the quarter panel window
@@sportiessc yeah you gonna need a top
make sure u connected the motor and transmission together properly....u probably gonna have to go through the system and check everything. .. for stripped transmission gears,cables ends both sides gotta make sure the transmission nylon gear where the cables fit into are not stripped too...,actuators binding
Yea I did what u said about the transmission and put new grease in it and I replace bothe cables only thing I haven't done was replace the relay and check th gears on the side but since the trans was turning period Ima change the relay
i bought a new motor off ebay i thought was hydro electric. ..might b mistaken. .ive bought so much from them....im gonna get a custom color top,so i don't know if they got to install it or not...if i end up with astock color like black or white. ..ill do it myself. ..already got the pads and everything else
check fuse 1st.....to take switch out on on my Pontiac, i had to remove the dash panel
my front bow pins are not falling in place,how do i adjust it to go forward more. i adjust the latch to hold it down but guide pins are not in the hole
My 73 delta 88 drivers side will not bend like it's stuck.. so it won't scissor. . Can I bang it to loosen it never did before
Thank you 🙏
I have a 1975 Caprice how do know if you need a switch and how to take it out
greg i have a caprice with the siccor top that works. but the elbow area are scraping on the way up and down. what do you think is my problem? and what do you suggest for the repair.
Hey. i cant get my side windows to close shut at the seal on the top, whats wrong?
Adjustments screws on the side of frame right above the quarter window
hope so ...i love those 75 caprice. ..i think that's the best body style
greg hicks so I got an update on my 75 caprice: I changed the motor,relay, and both cables. So now my top drops back with ease...now when I go to lift the top back up it stops about 1/3 of the way up and I have to get someone to help me. So I'm assuming it is the switch?? Would you happen to have a video on disassembling the dash?
mine does same thing did you figure anything out
Derrick Crenshaw no haven’t figured it out yet. I changed the motor and relay. Changed the gears and both cables. Still goes down good. Comes up for a few seconds and stops still.I’m ordering a switch this week.hopefully that’ll do it
Mine does same, but if i give it some gas the top will go all the way up
Also, did you cut holes in the back seat quarter panel covers for those speakers? I'm looking to get better sound in my 1975 LeSabre Convertible
Yeah I did cut the holes...6 /12
@@greghicks7532 Those speakers look great!
Wht type of seats are those. And where did you get speaker box in the back seat
I need a rebuilding kit
I have 73 caprice wit succor top, installing the top cables need ur knowledge
Scissor
What's happening
My top goes up and down fine but the driver side comes about 2 inches too far to close. Even if I try to pull it down I still can’t latch it. What should I check?
hi , I have the right side moving strong and left side weak when going down or up , what might be the problem
Hey bro can you please help me I have a 72 impela the top was working I just went to put it up and the relay just clicks and motor doesn't turn on
Could be a number of things...but I would start with the electrical side of the motor to relay since relay seems to be working...if you could bypass relay try that too..might be in the relay... see if the motor is turning ..if is could be stripped gears
workers there's a guy on utube that refurbish whole frames and sell them ...I think impala mike ima check
Thanks for the part 2 video Greg. Where is part 1 video? Don't see it on TH-cam any longer :( I about to remove and replace a top on a 1972 Buick LeSabre Custom. This will help a novice like me.
I have a 75 Eldorado . Want to know if i can use same scissor top arms if they are bent.
So when I drop my top the arms start to touch and I have to pull them apart to drop it all the way down, this also happens when I put it back up! The plastic guide the goes on the 2nd bow I think that's what it's called has broken off as well. Do you think it's the guide that has the arms touching now, when I drop the top and put it back up? Or do you think it could be something else?? Also before I lock the top when it's up the left side is lower then the right side by about 6 inches
Good video again brother!
I got a 1975 Buick LeSabre custom convertible in all the motor does is click I hear a clicking sound what is the problem please help
Does the top work at all ?
Mines does the same thing 75 delta88 convertible. Just a click noise and nothing else
Mann....Thanks for doing this video!!!
thanks my motor is new I did get a rely hope that works 1975 Chevy caprice . so the top fuse needs to be a 30
Thanks for sharing your video! Do you have an email where I can discuss what I need for my convertible top? It does not have a motor, cables, or a relay . I'm not in Virginia to go to Leon's auto parts. Is there a catalog where I can order these parts from?
I live in Fort Lauderdale fl and been going through hell trying to find a scissor frame top for my 71 Buick skylark. Do you know where I can find one ?
Face book market in dothan al
Hey bro how can I order the whole top frame please?
How did you replace the pin and remove the old one off the bow
What pin
greg hicks the one u pointed to it’s a ribbet
Wish I could send you a picture of it. U actually point to it almost at the end
Great info sir!
Thanks my brother- I appreciate it
Were you located i need my 1974 pontiac grandville convertible top fixed do you have a contact
very good video
Greg , are you available for an email, I have a question regarding this top. Hoping you can help
thanks Jessica
I want to add a top to a car that doesn't have a convertible top, how hard is it for me to do ... it's a 76 coupe Denville Cadillac
Hi, I leave in belgium, I have a Buick le Sabre convertible 1974 ,I want To ask You i We do to adjust the 2 câbles who goes To te motor, because my top goes in diagonal when i try To open. I remove the câble from the motor but the ride Side go first. Sorry for my english, But i leave in a french country.
Hello, i guess you need to close the convertible top than you can adjust the cables from the sides ....
Great video... thanks...
i hear the click but still not going up was work four years ago but top has hole in it so left it downnow it want come up
Same issue I have
My Second Bow Gets Stuck And Unadjusted When I Put My Top Back Up, What Could Be The Problem?
Relay was the culprit for me
I changed the fuse new motor and relay switch and checked the fuse but my relay makes a clicking noise when I got the switch but still no power what could be the problem
Corey Lockett did you ever find what's was wrong min is doing the same thing
Did you ever find what was wrong mine is doing same thing.
@@colbylovell6053 mine is doing the same , is there a way to let the top up manually? I just got mine and I let the top down and then I tried to let it up and it just went blank on me, I still here the click . It was easy to go down , and it struggled to go up and went blank after .
I have new motor, cable's and relay my top still stop when going up
Riles Boy bro Iam in the same position mine gose up about 10 seconds then stalls
Me too. I changed the gears both cables and motor and relay. Still won’t come up. Anybody find out what to do next??
WHats up guys, Im working on a 75 caprice with the same issues. Although I have not replaced any parts yet. Top goes down only if I start stop start stop. Going up, I have to completely pull it up by hand while holding the switch. How do I know if its the motor or transmission?
Is one side going up faster than the other?? If so it’s the timing bro
go to ebay ...put in your model car plus convertible. ..should pop up....i think they use about the same pages for all the scissor tops regardless of year make model lol
I found a place! It's in Florida the website is topsdown.com free 2 day shipping 225.00 hydro has them but they don't sell it on the website and they offer a rebuild service for 125.00
R u gonna put the top on yourself or take it to a shop? Because I'm stationed up here in Va beach and it's only like 2 places down here and they knocking heads off wit the prices
glad it worked
greg hicks what's your number
my top worked i was tryn to adjust it I heard 2 pops now one side works looks like one of the actuators not engaging .What do you think ? 1972 buick lesabre scissortop
i checked the actuator looks good took it apart. Cable broken
sorry. .if your cables are NOT turning
thank you sir
thanks need this video top doesnt work
PLEASE HELP I have a 1975 Pontiac Grandville Convertible top was working just fine and just stop working out the blue I have got a new convertible top switch changed all the fuse's new relay and left and right cable top still don't work motor not spinning at all I'm lost at this point the clicking from the relay I know it working motor I had tested by carquest and its new its working spinning both sides just fine have the dash out checking everything I'm not sure what else to do but have a shop fix it and over charge me ON PARTS AND LABOR please help anyone
Check gears in actuators
can u spoke over the phone Greg?? or I email u my number
Who knows how to adjust scissor tops my top on the drivers side isn't sitting flush on my rear window
my arms are touching what could it be
hey i deleted the first one...thanks
Tell me what you think I would appreciate it thanks
Bro what’s your fb I need your help
What's up homeboy
Cooling man bro my 72 delta 88 top was working fine but only one side was going yo you had to manipulate the passenger side to it to punk ass mechanic now nothings working I followed your video relay is clicking and the passenger side cable is snapped (tried to jb weld just to see if that would work still no movement)... need help bro
@@greghicks7532 what’s your number or Facebook bro
@@kingzues7710 lol can't jb weld that..gonna have to get a new cable too much pressure...put it in either up or down
@@greghicks7532 bro I need to know what to do water can I order all new parts for my top!?
joints has too much play