Can you bypass the drop sensors by splicing the wires together? With a completely flat floor it would be beneficial to just bypass the drop sensors so the robot vacuum would continue to function. I have a non-functional, but just out of warranty T8 OZMO AIVI.
Hey @ecovacstechnicalsupport5278, so good to see that you care about your customers! Great Work! Your videos really helped me out to replace my anti drop sensors. Sadly it turned out, that the sensors were not the problem: The 3 Sensors on the right side (1 front and 2 on the side) are all dead and I don't see the infrared led in a camera as opposed to the ones on the left side. That was also the case before replacing them. There is no suspicious rust or something. Do you have any hint what to look for / what to replace? That the front left is working and the front right isn't makes me wonder and I would want to try to replace the main electronics / mainboard next, but that is also kind of expensive and everything else is still working fine...
My t8aivi stops all of sudden, and then when I put it back on the docking station start charging. and as soon as the unit gets charging I can see the battery status as 79% does it mean we need to replace the main battery? The unit is 3-4 years old
Hello, mr expert. I want to buy front sensors for my t8 aivi from aliexpress. Do the front sensors for t8 fit on the t8 aivi + aswell? Can't seem to find front sensors that say t8 aivi just t8. Please help me out!
Hello, I have problems with my Deebot t8. It doesn't map, or when it does, it makes several overlapping and tilted maps. They told me that the LDS or the laser could be dirty. Could you guide me to solve the problem? Thank you so much!
Hey, is this for my request? Thank you! I fixed the side sensors but I was stuck on how to get to the front sensors. I'll let you know if I'm successful. Thanks again for this.
I have a deebot N8 that does exactly the same as your video. Ive checked all sensors and theres no rust and all light up on phone camera. But it still doenst work properly. Any ideas
Put some WD40 spray inside n hot water leave there for few minutes then slightly shaken...no Too hard else pipe will disconnect...then just throw the water...n pore some Hot water again n clean. Glass Will be much better
Thank you for the clear explanation and information. My problem is a little bit complicated, We need your help. When we turn on de deebot it then gives 7 beeps and then nothing. Reseting also doesn't work. Drop sensors looks clean. The deebot is just 1 month out of warranty. My husband wants to try to repair it himself. We already opened it up following your instructions. See here the problem th-cam.com/users/shortsPFIgpRfOOyU?si=A5CU4zjdaxrb5aH3 I hope you can help us!
Thank you got mine fixed
Thank you for your wonderful video. It was easy to follow. So glad you included putting it back together!
It seems my drop sensors are good, you said it can also be the bumper, is it possible even if we get the anti drop error message?
Can you bypass the drop sensors by splicing the wires together? With a completely flat floor it would be beneficial to just bypass the drop sensors so the robot vacuum would continue to function. I have a non-functional, but just out of warranty T8 OZMO AIVI.
Hey @ecovacstechnicalsupport5278,
so good to see that you care about your customers! Great Work!
Your videos really helped me out to replace my anti drop sensors.
Sadly it turned out, that the sensors were not the problem:
The 3 Sensors on the right side (1 front and 2 on the side) are all dead and I don't see the infrared led in a camera as opposed to the ones on the left side.
That was also the case before replacing them.
There is no suspicious rust or something.
Do you have any hint what to look for / what to replace?
That the front left is working and the front right isn't makes me wonder and I would want to try to replace the main electronics / mainboard next, but that is also kind of expensive and everything else is still working fine...
Very good video, thank you very much!
Welcome
My t8aivi stops all of sudden, and then when I put it back on the docking station start charging. and as soon as the unit gets charging I can see the battery status as 79% does it mean we need to replace the main battery? The unit is 3-4 years old
Hello, mr expert.
I want to buy front sensors for my t8 aivi from aliexpress.
Do the front sensors for t8 fit on the t8 aivi + aswell?
Can't seem to find front sensors that say t8 aivi just t8.
Please help me out!
Hello, I have problems with my Deebot t8. It doesn't map, or when it does, it makes several overlapping and tilted maps. They told me that the LDS or the laser could be dirty. Could you guide me to solve the problem? Thank you so much!
While Mopping i did upside down Deebot X1 Omni will it drop the water inside? thanks in advance.
Hey, is this for my request? Thank you! I fixed the side sensors but I was stuck on how to get to the front sensors. I'll let you know if I'm successful. Thanks again for this.
I have a deebot N8 that does exactly the same as your video. Ive checked all sensors and theres no rust and all light up on phone camera. But it still doenst work properly. Any ideas
Where can I buy the sensors from? I can't find all the ones needed online
Hi, I really need you help. Can't find the sensors for the front bumper anywhere online
Hi, I am using N8. Gress moss develooed in Water reservoir. How to clean that please help me
Put some WD40 spray inside n hot water leave there for few minutes then slightly shaken...no Too hard else pipe will disconnect...then just throw the water...n pore some Hot water again n clean. Glass Will be much better
I have Deebot N10. It has stopped vacuuming suddenly. All other functions are ok. Any idea?@@ecovacstechnicalsupport5278
Hi my i have problem with my deebot N8 one side brush rotates slowly what's the problem
If without pressing auto button it start turning when power on that means got short circuit with Motherboard
If return to charge & looking for charging dock n side brushes turning slowly it's normal don't worry
Thank you for the clear explanation and information. My problem is a little bit complicated, We need your help. When we turn on de deebot it then gives 7 beeps and then nothing. Reseting also doesn't work. Drop sensors looks clean. The deebot is just 1 month out of warranty. My husband wants to try to repair it himself. We already opened it up following your instructions. See here the problem th-cam.com/users/shortsPFIgpRfOOyU?si=A5CU4zjdaxrb5aH3
I hope you can help us!