Trim come-along to just a smidge under the width of discharge chute, change 2 x 4 discharge chute boards to 2 x 6. Less spillage and come-along will pull more brass per stroke all the way through to the bucket. Neat set up.
You would save a ton of time if you would raise the tumbler up and slope the board below it. Gets it closer to free automation by using gravity to your advantage.
Are you able to load that immediately or do you have to wait to let the primer pockets dry? Also, do you recap all of this beforehand or do you leave the primers in?
This guy loves Shooting So Much he Gotta have his Own Ammo Factory in his Backyard !! After watching this; I wonder if he wash the dishes at Home ? LoL
Easy way to find out, weigh empty bucket to get weight. Weigh out enough brass to get 1 lb, zero bucket weight on scale and fill bucket, simple math after that. Did that with 30.06 and was darn close to actual count.
16:50 Guy in video said "That is how you clean approx. 7500-8000 .223 cases at once." They all fit in two less-than-full buckets. So I'm guessing one bucket full to within an inch of the top contains 3,500-4,000 .223 cases.
That "secret potion" sure looks like a bottle of CLR 🙂. Erik Cortina(F-class shooter) uses that to de-carbonize his barrels
Impressive Zack. Thanks for leaving this up.
This was awesome, good on you for coming up with that tumbler!
Need is the mother of invention.
Good job!
Thank you for the inspiration.
I'm getting ready to start an ammo company up here in Indiana
Trim come-along to just a smidge under the width of discharge chute, change 2 x 4 discharge chute boards to 2 x 6. Less spillage and come-along will pull more brass per stroke all the way through to the bucket. Neat set up.
Should have used a wide video camera
There has to be media stuck inside the brass and in the flash holes
And a country boy can survive...
I think I would cover the wood with spray on bed liner to keep the wood from rotting. Great idea though.
Can you show is your brass separation process?
Hola, primero le pones detergente? luego que le pones y por ultimo es arena lo que usas?
You would save a ton of time if you would raise the tumbler up and slope the board below it. Gets it closer to free automation by using gravity to your advantage.
Are you able to load that immediately or do you have to wait to let the primer pockets dry? Also, do you recap all of this beforehand or do you leave the primers in?
What media were you using to polish your brass there? I thought regular sand was too abrasive and would damage brass casings.
This guy loves Shooting So Much he Gotta have his Own Ammo Factory in his Backyard !! After watching this; I wonder if he wash the dishes at Home ? LoL
Put a vibrator on the bottom of your separator and you wouldn't need to shovel media nor dent brass as you are cleaning it out.
Thanks for sharing!
About how many pieces of brass are in a 5 gallon bucket? Just a rough guess?
Easy way to find out, weigh empty bucket to get weight. Weigh out enough brass to get 1 lb, zero bucket weight on scale and fill bucket, simple math after that. Did that with 30.06 and was darn close to actual count.
16:50 Guy in video said "That is how you clean approx. 7500-8000 .223 cases at once." They all fit in two less-than-full buckets. So I'm guessing one bucket full to within an inch of the top contains 3,500-4,000 .223 cases.
1 5 gallon bucket filled just below the rim is anywhere from 50-60 pounds of .223 which could give you an idea.
What? No Lemi Shine?
Next time, please turn the camera 90 degrees so we're not looking through a keyhole ...
what is that detergent or chemical you add at the beginning?
Artashes Harutyunyan dish wash soap
Dawn, it has no ammonia in it.
Is your media corn 1420 grit?
THE POTION IS BLUE BOTTLE SIMPLE GREEN
Iosso. Is that your secret potion
#500 like :P
Secret potion my ass!!! Thas CLR!!! Good stuff though!
Laundry soap or automatic dishwasher soap doesn't suds.
Ear phone warning....
Cool now make it quieter
He should really be wearing black socks with those crocks :)
So that's how reloads get dented.. I always thought it was due to human error.
That looks like a Hell of a mess to me
Clr
CLR
Keith Heffernan that’s what I think
They sold out
Ammo Porn
want about using ss media and not corn
Wayyyy too much Dawn