Thank you, i just created a replacement key form VVDI, but the car wouldn't lock and unlock, but now after watching this, it does, many thanks for taking the time to post this, and also talk people through how this is done, many many thanks
Man, thank you! Short and clear. I was hard thinking about buying a new VCDS for my Volkswagen Passat B8 to code my trailer hitch on my own. Everything is working with my new trailer hitch, but I got some error codes I cannot delete with my old stuff I have. And always driving with error codes, means you dont see a real new error if it comes up. Anyways, I hoped the key code thing is working; and it looks really fine.
On my Seat Leon P1 2010 I had to go through instead of . Process is exactly the same. Successfully re-programmed my remote, after it was "forgotten" for some reason... Thanks a lot!!
Tried this in my 2011 Jetta TDI, everything works until I try to enter a new value. the stored value comes up as 0, and I am unable to save or test with the new number. The only thing it lets me do is enter 0 in the new value field, only then does the save button work. Not sure what is going on. I've looked at making sure my firewall was disabled and every other thing I've found online. nothing works. Any info would be appreciated.
Hello, I would like to ask Your help in issue regarding to key remote adaptation. So basically during adaptation of key I am going to Modul 35(46 is unavailable as my car from 2000 year Audi A4B5 1.8T) then block 10-->00 channel-->SAVE and when I'm going to 01 or 21 channel every time I get ERROR message - The channel is unavailable and I cannot match the key, the each block is inactive. What could be the problem, why the blocks are inactive???
just picked up 15 Passat, I see above you state works great for earlier years. will it work on my 15? Need another key. also can't seen to find where to dnld the software. Thanks.
do you know where the vacuume pipe off the fuel regulator goes to my car is a VW MK4 GOLF 1.6 16V AZD ENGINE. The previouss owner has bodged it up with 3 seperate bits of pipes and joined them together when i pulled the pipe off the regulator it also came off at the other end cant find where the other end goes. I have a missfire so checking for vacuume leaks tried spark plugs an coils and commpressions are good to also cleaned injectors still no change. Cheers man
Hey i deleted my immobilizer with you guys, car works great it is just that I cannot open the car with the remote, how would I go about doing that with this program?
HI I HAVE A VW TRANSPORTER T5 VAN,AND THE CENTRAL LOCKING NOT WORKING FROM THE REMOTE,BUT WORK IF U TURN THE KEY ON THE DOOR, I PUT NEW BATTERY ON THE KEY,AND THE RED LIGHT IS ON,IF I PRESS IT,BUT NO COMMUNICATED WITH THE VAN. WHAT DO I HAVE TO DO TO REPAIr IT, TO DO EXACTLY WHAT U DONE IN THE VIDIO,WILL WORK,I HAVE CLONE VCDS,WILL WORK?THANKS A MIL!!!!
I have a 2004 Audi A8L and this procedure didn't work for me. I don't have the pull down menu for "Remote Control Adaptation" but I have "Customization for key 1, Key 2, and Key3 and Key 4". The pop up help indicates what customization that you would like to have for the keys(e.g., auto windows down). Unless the "keys" refers to the buttons on the remote fob rather a physical number of keys?
Do you need an original key or you can use it with a fake key? My central system got crazy and had to change with another one that's not original and it came two keys, it's working fine but i'm super limited hence why i'm asking.
hi. my car 2007 audi a8l.model there are no remote control adaptaion in 46channel. but it has personalization key1 . key2. key3. key4 but key 2.3.4 are same code 1522. key1 is 1822. i want to make new key(i bought used car and there is only 1 key. so i need to get a new key. and buy it through e bay) thanks to your advise. hope so ^^;;
I have a 2015 tiguan and only have one fob. Can I add additional fob bought off from aliexpress or ebay and adapt them? Thank you in advance for the help.
Hi no one's seems to know this question are you able to help me i have a 2002 vw how to i bring up the code for it please i have the machine but if it's lost how do i get the code please
What does this process do? Does it allow a new-to-me keyfob to start up my car, or is it only for the remote door locks? If it does not do starting, is there any way for VCDS or any other program to link a new key to a car for starting it up?
@@roofcamper3473 Ok. Then the procedure is only useful if you have a broken door lock or don't have a single working key or something, since there is a non-VCDS method.
@@Infiniti25 Well just to be clear VCDS cannot add a key. It just is an alternative way of programing the motherboard in a key. They only do the remote functions like opening the truck. Starting the car using an RFID transponder, and VCDS cannot handle it. But, yeah I did find a page or two on it. If I paste the url here it will get censored, so I am not sure of the point. Obviously, the car makers want ppl to go to the dealer and not be able to program transponders not just to have income but also do not lose income on the kia basis that your car can be stolen.
I've tried (unsuccessfully) to do this so many times over the past couple of years, and failing again at this exact moment! Pressing read on Channel 00 just does nothing. When I select channel 21 (the remote adap for my A4 B6), I get an information bubble explaining how to do it, but clicking Read again seems to do nothing. It does not retrieve a stored value and the Test value box remains disabled. Ever seen this?
Hi! I did exactly what you did in the video. When I press on the keys' buttons I get the confirmation blink from side turn signals. But when I return to Centr. Conv. 46, the channel 01 shows again only one key. I have an original second key which desynchronized all of a sudden. Changed the battery. The LED on the key lights up when I press the buttons, but the adaptation on central convenience 46 fails to store 2 keys instead of one. Any help would be appreciated! Best regards!
@@iwantitpaintedblack That is what I'm going to do in the end. For now I have the other key and two other remotes from the alarm so I'm not in a rush just yet.
@@TuneMyEuro Near end of this video where you put 3 in the input field...that was for # of keys you have that need programmed right? I have 2 so thats what i would put in?
![ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #2 SS8 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/RMhUgxxD49Q/mqdefault.jpg)
Thank you, i just created a replacement key form VVDI, but the car wouldn't lock and unlock, but now after watching this, it does, many thanks for taking the time to post this, and also talk people through how this is done, many many thanks
I didn't get the beep but it definitely worked so you can keep the beep.....thanks a million Sir!
Man, thank you! Short and clear.
I was hard thinking about buying a new VCDS for my Volkswagen Passat B8 to code my trailer hitch on my own. Everything is working with my new trailer hitch, but I got some error codes I cannot delete with my old stuff I have. And always driving with error codes, means you dont see a real new error if it comes up.
Anyways, I hoped the key code thing is working; and it looks really fine.
Absolutly brilliant video!!! Thankyou so much for this, my locks now work!!!!
Thank you man , you saved my money . It works for me . Exactly what you said , i.ve done . Greatings from Romania . God bless you and your family
did it now on gti golf 6 , works, thanx a million
Nice it’s Good for my Audi A4
Thank you for you’re tutorial
Am very happy 👍🙏🏾
Thanks a lot! It saves me a lot of money and time
On my Seat Leon P1 2010 I had to go through instead of . Process is exactly the same. Successfully re-programmed my remote, after it was "forgotten" for some reason... Thanks a lot!!
was there an option there to program keyfobs?
@@iwantitpaintedblack Yes there was
Thank you. Works on Polo 9N 2002 1.4MPI
Tried this in my 2011 Jetta TDI, everything works until I try to enter a new value. the stored value comes up as 0, and I am unable to save or test with the new number. The only thing it lets me do is enter 0 in the new value field, only then does the save button work. Not sure what is going on. I've looked at making sure my firewall was disabled and every other thing I've found online. nothing works. Any info would be appreciated.
Hi, my audi a6c5 , central lock module was burnt, so I changed the new one. Unfornately, the remote could not learn. I'm not sure if VAGCOM will help?
Hello,
I would like to ask Your help in issue regarding to key remote adaptation.
So basically during adaptation of key I am going to Modul 35(46 is unavailable as my car from 2000 year Audi A4B5 1.8T) then block 10-->00 channel-->SAVE and when I'm going to 01 or 21 channel every time I get ERROR message - The channel is unavailable and I cannot match the key, the each block is inactive.
What could be the problem, why the blocks are inactive???
just picked up 15 Passat, I see above you state works great for earlier years. will it work on my 15? Need another key. also can't seen to find where to dnld the software. Thanks.
do you know where the vacuume pipe off the fuel regulator goes to my car is a VW MK4 GOLF 1.6 16V AZD ENGINE. The previouss owner has bodged it up with 3 seperate bits of pipes and joined them together when i pulled the pipe off the regulator it also came off at the other end cant find where the other end goes. I have a missfire so checking for vacuume leaks tried spark plugs an coils and commpressions are good to also cleaned injectors still no change. Cheers man
does it program the immobilizer chip or just the remote lock?
Will this work with used keys from a different Q5?
Hey i deleted my immobilizer with you guys, car works great it is just that I cannot open the car with the remote, how would I go about doing that with this program?
does it work if i have brand new key not coded before and key i cureently use?
HI I HAVE A VW TRANSPORTER T5 VAN,AND THE CENTRAL LOCKING NOT WORKING FROM THE REMOTE,BUT WORK IF U TURN THE KEY ON THE DOOR,
I PUT NEW BATTERY ON THE KEY,AND THE RED LIGHT IS ON,IF I PRESS IT,BUT NO COMMUNICATED WITH THE VAN.
WHAT DO I HAVE TO DO TO REPAIr IT, TO DO EXACTLY WHAT U DONE IN THE VIDIO,WILL WORK,I HAVE CLONE VCDS,WILL WORK?THANKS A MIL!!!!
Buen aporte.
I have a 2004 Audi A8L and this procedure didn't work for me. I don't have the pull down menu for "Remote Control Adaptation" but I have "Customization for key 1, Key 2, and Key3 and Key 4". The pop up help indicates what customization that you would like to have for the keys(e.g., auto windows down). Unless the "keys" refers to the buttons on the remote fob rather a physical number of keys?
did you ever find out what it refers to?
Would this work for my 2008 Audi A4 B8 8k model?
Hey i have a problem , the lights blinked when i adapted the remote but it doesn’t save
Is this feature for learning lock unlock button? On transponder key fob possible?😀
Do you need an original key or you can use it with a fake key? My central system got crazy and had to change with another one that's not original and it came two keys, it's working fine but i'm super limited hence why i'm asking.
What is this procedure dor? If I buy another key?
Ty
Pop up in my car „no ok” when trying to programm key fob. Any solutions?
Just bought a Octavia 2014 & it only came with 1 key, can I delete other key fob if assigned ?
How or where can I get this VCDS I have 2006 Audi A6c6 and I lost the key so got an replacment key thats not program to car....
hi. my car 2007 audi a8l.model
there are no remote control adaptaion in 46channel. but it has personalization key1 . key2. key3. key4 but key 2.3.4 are same code 1522. key1 is 1822.
i want to make new key(i bought used car and there is only 1 key. so i need to get a new key. and buy it through e bay)
thanks to your advise. hope so ^^;;
Will this work for my MK1 Seat Leon ?
my central lock is not working with remote. I think i have to reprogram it with vcds
Thanks man,you saved me!!!!
What about a 2012+ a6? I got one with a single key. How can I add a key without going dealership (asked $500 for 1 key)?
well you need the right key and the right software to do it. I use vvdi, xtool and vcds just for this.
Would this work for Audi A8 D4 2011?
Do i need full version of vcds?
Would this work on the lite version of VCDS. ?
I can't get to the menu he is showing in video with my VCDS lite
I have a 2015 tiguan and only have one fob. Can I add additional fob bought off from aliexpress or ebay and adapt them? Thank you in advance for the help.
hi did you ever find a solution?
Weird.. mine doesn’t have option’s to do that? Help please 😢
Hey i run a diagnostic on my vw golf 3 and it says key:signal to low...what should i do???
new key battery
i need only vcds program for this?And if you have your original key and you want to adapt another one new what number do you enter in the second bar?
I guess you only need skc for programming too immobiliser? But for keys on remote to be programmed you don’t need skc?
Hi no one's seems to know this question are you able to help me i have a 2002 vw how to i bring up the code for it please i have the machine but if it's lost how do i get the code please
What does this process do? Does it allow a new-to-me keyfob to start up my car, or is it only for the remote door locks?
If it does not do starting, is there any way for VCDS or any other program to link a new key to a car for starting it up?
This only allows you to use the remote for locking, unlocking, trunk open and alarm. Pairing a new key to the immobilizer is a whole separate battle
@@roofcamper3473 Ok. Then the procedure is only useful if you have a broken door lock or don't have a single working key or something, since there is a non-VCDS method.
@@JasonTaylor-zf6fodo you have instructions for non-VCDS method of adding a second key fob to a 2009 Audi A3 which only came with a single key?
@@Infiniti25 Well just to be clear VCDS cannot add a key. It just is an alternative way of programing the motherboard in a key. They only do the remote functions like opening the truck. Starting the car using an RFID transponder, and VCDS cannot handle it.
But, yeah I did find a page or two on it. If I paste the url here it will get censored, so I am not sure of the point. Obviously, the car makers want ppl to go to the dealer and not be able to program transponders not just to have income but also do not lose income on the kia basis that your car can be stolen.
@@JasonTaylor-zf6fo I have email notifications enabled so even if it gets deleted I might be able to see and click it from email
hi, i have audi a3 with another cluster and cant start, it just say safe mode what must i do?
im in the same boat, i just bought a used ecu without keys but i got my old ecu and my keys.
can i do the samething for audi a3 2010
I did the same steps and the car flashes when I press the unlock/lock button but after exiting the controller, remote Still does not work.
Tim Kruttschnitt Have you solved the problem ? And does it remove the existed remote if you do this steps ?
Awaiting you reply
Does this just program the keyless entry?
Did you ever find an answer yet?
I dont have option for remote conteol adaptation?
On my Seat Leon P1 2010 I had to go through instead of
i want to install a rear view cam on my ibiza 2015... How i i do?
I've tried (unsuccessfully) to do this so many times over the past couple of years, and failing again at this exact moment!
Pressing read on Channel 00 just does nothing. When I select channel 21 (the remote adap for my A4 B6), I get an information bubble explaining how to do it, but clicking Read again seems to do nothing. It does not retrieve a stored value and the Test value box remains disabled. Ever seen this?
I need help I have a 2006 vw Jetta it starts for 1 second and turns off I think it’s the imobleizer if you know how to fix please reply
dealer only!
Will this work on a Mac?
NO. Windows only. but you can install windows using bootcamp or parallels. That's what I did and it works like a charm
Hi! I did exactly what you did in the video. When I press on the keys' buttons I get the confirmation blink from side turn signals. But when I return to Centr. Conv. 46, the channel 01 shows again only one key. I have an original second key which desynchronized all of a sudden. Changed the battery. The LED on the key lights up when I press the buttons, but the adaptation on central convenience 46 fails to store 2 keys instead of one. Any help would be appreciated! Best regards!
Having same problem, did you solve it?
@@iwantitpaintedblack unfortunately no
@@mari075 you made this comment 9 Months ago, thought maybe you solved it meanwhile. went to a workshop to get it fixed?
@@iwantitpaintedblack That is what I'm going to do in the end. For now I have the other key and two other remotes from the alarm so I'm not in a rush just yet.
@@mari075 and your other keys work properly?
Mine doesnt have remote control adaptation, it has remote control key matching or erasing
Same here
In cant connect 35 and 46
Do you realize that you don’t need VCDS to program remotes? All you need is one that’s already programmed, and one that’s not.
That works great if the car doesn't have any malfunctioning door switches, many older cars do have this issue.
AA is right...im having this issue now. 04 A4 1.8t.
@@TuneMyEuro Near end of this video where you put 3 in the input field...that was for # of keys you have that need programmed right?
I have 2 so thats what i would put in?
Hi Eric, can you tell us how to do this? Thanks!
Can you program the immobilizer without VCDS?
Doesn’t work!!!!
Fake
ilhan konya there is nothing fake about this
ilhan konya
Like your pointless troll remark.