Thank you for this video. My husband recently died and the weeds were out of control. I had never used this equipment before and I got a lot of the weeds gone today. Too hot to do it all but now I know how to use this tool.
Thank you! This helped me start mine right up! I’m a single mom and have never weed eated before .. I watched like ten videos before I saw this one and none of them were helpful for me so thank you for explaining it so well!
Always good to mention that there's a " Break-in" period. I have the FS56RC and after 3 tanks of fuel it was WAAAAY better/stronger than at first start. Great trimmer for 5 acres.
@@marionfrieze9718 Sorry for late reply, I haven't been signed in. So, basically the Break In just means or consists of running the trimmer. The more you use it, when brand new, you'll find that it starts running better. Like quicker throttle response, higher RPMs, and most importantly...more power. Same thing with new chainsaws. Usually after 5 full tanks of fuel through it you'll be able to tell. Hope this helps.
100,000+ views and only around 800 likes come on people! You're getting to see how it works, how it runs and what it takes and requires before purchase so you know how it helps your needs or doesnt. Lets go
I have one of these weedeaters, it is the most reliable weedeater i've ever had. It is 6 years old and still kickin on the same carb, sparkplug and shaft!
I bought my FS-56 RC- last week and had 1.25 tanks on it. Today, I primed it 5 times, put it in full choke and cranked it on the first pull. I then pushed it down to half choke and let it run there until the rpm stabilized. I then cut with it for 15 minutes, cutting some pretty weedy areas. I am very pleased with it and it is a lot easier to crank than my old Husqvarna 28L. It is running a mix of Stihl Moto Mix and my standard 45:1 Stihl Ultra with premium non ethanol gas.
Just bought one of these . Pretty impressed this is my first Stihl trimmer I have a Stihl chain saw but first trimmer I bought. Seems like a legit base model straight shaft . Works great
I spent $600 on my stihl km91r with the edger and strimmer attachment and it's not slacking off on paying itself off, it's the best machine I've ever had
You are right, I should have done this. Since there are so many different head options on these machines I will have to do a video on all of them and how to use them. Thanks for watching!
I just purchased that same exact unit from my local stihl dealer. It works great as advertised! Awesome power!! The only thing I’m struggling with is getting the trimmer line to feed properly. I’ve had to stop every 10-15 min or so to open the head and pull out the line. Any suggestions on how to successfully use the bump auto feature??
The thing I see the most is when too much line is wound into the head at once. Then you start to get hangups, so just be very cautious and precise on putting the correct amount of line into the head. This varies on whichever head you are using so make sure and follow the recommended amount when you are refilling your line.
Left store before pulling trigger on this. Wanted to do one final research. You did awesome appreciate it. Only thing I wanted to know because Im a noob is.. When it does run out of wire, are you refilling it with like a cheap under $10 thing of stihl line OR do you have to buy that $40 all inclusive plastic head each time you need to replace line?
Tough call. Both are good machines. I would compare warranties, parts availability in your area, and serviceability if needed. These things would be what I would be looking at to make my decision.
I have both, sthil for 13 years, starts every time, knock on wood, the husqvarna 6 years, problems started after 2 years, I'm done throwing money after bad and still can't get get it started, I wanted to like it but I don't have time to mess with it when it is costing too much and not starting, go with sthil, it will save you a lot of headaches.
The 128 husqvarna only lasted me three summers, only home use, never mistreated, I replaced the carburator, coil, sparkplug, fuel lines and still wouldn't start, I just gave up on it,I liked it because it was attachment capable, but the quality is not there, my fs55 sthil starts on first or second pull,after twelve years.
Awesome video! You did a great job explaining key features and the right way to start it up. Also kudos for showing the parts to keep an eye on for maintenance. Stihl should hire you to demo their products.
Hello. Great demo & review, thank you. I just got the FS56RC-E & was wondering if a rattling noise when idled on the ground is normal? When I set the line trimmer on the ground there is a rattling noise that sounds like its coming from the shaft at idle speed. Other then that it seems great. Runs fine & goes away when I give it gas. I was wondering if this is normal with this model because my previous trimmer was a FS80 & doesn't make this noise.
I wondered the same thing, I asked my local guy. He said it is completely normal, the clutch makes this noise when the shaft is spinning almost fast enough to disengage the clutch
@@deeznuts8967 I tried adjusting the carbs, checked the flex shaft & re-lubed. Still made the noise. I ended up tightening the 3 bolts in a row on the bottom side of the engine cover close to the trigger & that has fixed it! Hope this helps
I just purchased this unit today and this is my first time operating a weed eater. So, my beginner question is, how do I know when to replace the string? I should have asked this question in the store, but, I was all tied up in how to get it started and use it.
Awesome, I hope you like it! So when you notice no more string is coming out when you bump then head on the ground it is time to take the cover off of the head and see if you are out of string or if it is just broken off. I wish there was an easier way to check it but that is really the only way. I hope this helps and thanks for watching!
Mine has notches you put your fingers in them to turn. i feel it’s difficult to turn. I won’t buy this brand again They (the store)switched out to an old school head I have to wind, not happy .
You can check out must of their pricing online at StihlUSA.com after you chose a dealer and then I have another video on the channel going over the blades that you can check out as well.
Hi....nice demo. Thank you....I just bought mine. Use to run a 90 r.... Now have the Fs 56rc-e. .this is more for light weight use?.....Have pretty large property.
yeah, very nice trimmer. However, It would be nice to know if this unit can accept a cutting blade. Note some units like the 94 straight shaft will not take a blade.
Both are good trimmers. You will get more power with the FS91 and the ability to use the metal blade attachments safely. I hope this helps and thanks for watching!
Nice demo trimming the building & concrete there. I was hoping you' d show this trimmer working through some tall grass & weeds to lite brush that i'll encounter in my yard. I guess i'll have to watch other videos.
Nice video sir! I work with a crew that uses the fs91 but for my own residence that would be overkill. This model is just right! Great demonstration as well!
I have the same exact model very reliable had over a couple of years and I use the pre mix but I never use half choke I only use full choke of the trimmers been sitting and then I squeeze the handle to shut the choke off and runs fine after
Great video! I just purchased this trimmer. Starts good, runs good. After running hard for a couple hours the very first day, when it idles it intermittently makes a high squealing noise. Not an engine noise, but like something is rubbing, or catching. Only when at an idle. Any thoughts? I do have a video of the noise, if needed. Thank you!
Hey. Did you ever find out what the noise is or if its normal? I just got a FS56 & if I let it idle while sitting on the ground there is a rattling noise that sounds like its coming from the shaft. It runs great & only makes the noise when left in idle while on the ground. Was this the noise yours was making?
I’m glad you are enjoying your trimmer. The way to these this is to take the head completely off of the shaft and then take the cutting unit off of the head and then pack grease into both sides. Thanks for watching!
Thank you. Great video. I just bought one today here in Barbados. Had a great demo before I left the store but could not remember all that was said. Can't wait to try it out.
This could be a few different issues. I could be a fuel issue as in the machine may be pulsing so it could be your fuel filter or carburetor. Another thing is the plastic sleeve inside the shaft that protects your drive cable could be worn causing that drive cable to be flopping. Also you might check the screen on your muffler because it may be clogged causing your machine to have a hard time breathing. I hope this helps and thanks for watching!
hello so i recently bought the fs56rc and bought the stihil ultra HP oil , do i have to add that to the gas tank? the dealer i bought it from put gas but not sure if they put that oil in
You need to mix that oil with your gas in the ratio that it says on the bottle. mix it up in your gas can and then keep that can separate for your weedeater. You only want to run that as/oil mixture in your weedeater or other 2-cycle engines.
thanks ! only problem is they left it like 50% full and dont know if they expect me to add my oil but i will ask the dealer and same goes for a stihl bg55 blower right planning on getting one aswell, is $140 a good price used or new better thanks
If you go on our 247Parts channel i have videos over a couple of different head options and how to load them. I didn't show that in this video because of the fact that you can change to different heads.
Just bought a like new 56 2nd hand for $100. Owned a55r for 15yrs or more put it through hell and never let me down. Love my stihls! How does echo compare anyone ran them side by side over long term?
I have one that will not spark. I’ve tested the new coil and new plug and it still won’t spark. I’ve bypassed the switch also and will not spark. Any suggestions?
Excellent explanation. Details at best and well expressed. Thanks brother. Cant find anything on your clips on how to start a cold chainsaw. Thanks anyways!
Depends on what you mean by speed feed. It does have the bump head that will let line come out on the go by bumping it on the ground. Now as far as the fast loading head that would have to be a separate purchase. I hope this helps and thanks for watching!
It works well, especially if the machine is too heavy for a person. I personally do not use the strap but it is a nice option to have. Thanks for watching!
It can use various different sizes depending on which cutting head you use, but it will come standard with the orange .095. Thank you and thanks for watching!
So the FS56RC-E measures about 69.5" and the FS91 measures about 73". This is the full length from back of the engine to the head. I hope this is helpful! Thanks for watching!
I’ve used mine twice so far around the house. I will also use it with a blade for clearing brush on my 5 acres up north. Can’t wait to see how it holds up!
You could by the edger head assembly and take off your trimmer assembly but as far as a specific edging attachment no. You can change the angle of the loop handle to make it easier to flip over for edging with you regular string trimmer head. I hope this helps and thanks for watching!
You can add different heads to all of them but only certain models accommodate certain style heads. Did this answer your question? Thanks for watching!
Follow the owners manual and this thing will start in 1 pull every time maybe 3 if it's sat dormant for a few months. I own 2 Husqvarna chain saws a 440e and a 460, both of them I have to mess with for a 1/2 hour to get them started. I'm selling them and getting Stihl's
I have the older version of this. FS55R. Still runs great 👍 I love the gaurd on the stihl. Took it off once and it blew grass all over me. Great review! 🙂
@@alvesthegreat Do you have the choke engaged?? The engine cannot start if you're choking it out. Try starting it with the choke wide open and if it still refuses to start, try squeezing the throttle completely while you're pulling. What model do you have?
@@psacgvolunteers I have the fs55.... I did choke it... But it's so hard to start my shoulder is now sore.... A friend of mine came and emptied the gas... Then he started it then refilled it..... Weird
@@WesternEquipment well I found out y mine did there a plastic piece that stops the flexible shaft from going up to far it was broken and down inside the tube $1.50 fix
Well we are always selling these but unfortunately we can not sell them on our website. They must be bought in-store. But feel free to check us out at west-equip.com to see if we have a location close to you!
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
Thank you for this video. My husband recently died and the weeds were out of control. I had never used this equipment before and I got a lot of the weeds gone today. Too hot to do it all but now I know how to use this tool.
Thank you! This helped me start mine right up! I’m a single mom and have never weed eated before .. I watched like ten videos before I saw this one and none of them were helpful for me so thank you for explaining it so well!
Well I am glad I could help and thank you for watching!
Always good to mention that there's a " Break-in" period. I have the FS56RC and after 3 tanks of fuel it was WAAAAY better/stronger than at first start. Great trimmer for 5 acres.
Good info to know! Thanks for that and thanks for watching!
@@WesternEquipment how do you install plastic blades on it. Do I need some sort of adapter?
So explain the breakin-in.period. If you would....I bought it brand new yesterday. Have ran a couple tanks thru it already.
@@marionfrieze9718 Sorry for late reply, I haven't been signed in. So, basically the Break In just means or consists of running the trimmer. The more you use it, when brand new, you'll find that it starts running better. Like quicker throttle response, higher RPMs, and most importantly...more power. Same thing with new chainsaws. Usually after 5 full tanks of fuel through it you'll be able to tell. Hope this helps.
Iv just brought a fs 55 and no running in period is needed, that has been done in the factory already!
I had mine for almost 3 years and I put it through heck and it still running like a top these are some good weedeaters
Thats what we like to hear right there.
100,000+ views and only around 800 likes come on people! You're getting to see how it works, how it runs and what it takes and requires before purchase so you know how it helps your needs or doesnt. Lets go
Thank you for that and thanks for watching!
I have one of these weedeaters, it is the most reliable weedeater i've ever had. It is 6 years old and still kickin on the same carb, sparkplug and shaft!
That's what we like to hear! I have been selling and using Stihl equipment for over 10 years and it has proven over time to be top notch.
I bought my FS-56 RC- last week and had 1.25 tanks on it. Today, I primed it 5 times, put it in full choke and cranked it on the first pull. I then pushed it down to half choke and let it run there until the rpm stabilized. I then cut with it for 15 minutes, cutting some pretty weedy areas. I am very pleased with it and it is a lot easier to crank than my old Husqvarna 28L. It is running a mix of Stihl Moto Mix and my standard 45:1 Stihl Ultra with premium non ethanol gas.
Awesome! I am glad you are liking your new trimmer! Any reason behind the mix of fuel?
Just bought one of these . Pretty impressed this is my first Stihl trimmer I have a Stihl chain saw but first trimmer I bought. Seems like a legit base model straight shaft . Works great
Glad to hear you are liking it and thanks for watching!
Got a Stihl FS 56 RC. It's the best trimmer me and dad ever ran. It's more than 2 years old. We bought it back in the summer of 2019.
I agree, it is an awesome unit! Thanks for watching!
We have five acres we only use Stihl machines FS 90 and two of these mentioned. Over four years used.Love the durability . Thank You Stihl
Just purchased this model. Seems to idle high. Works really good.
Awesome! I hope you are happy with it and thanks for watching!
I spent $600 on my stihl km91r with the edger and strimmer attachment and it's not slacking off on paying itself off, it's the best machine I've ever had
This is AWESOME to hear! Glad it is working out well for you, Thanks for watching and thanks for the comment!
@@WesternEquipment once it warms up I will do a 2 year review on my channel if you want to watch
Since winding the string on is what you most often do it it would be nice to have seen you do that.
You are right, I should have done this. Since there are so many different head options on these machines I will have to do a video on all of them and how to use them. Thanks for watching!
I just purchased that same exact unit from my local stihl dealer. It works great as advertised! Awesome power!! The only thing I’m struggling with is getting the trimmer line to feed properly. I’ve had to stop every 10-15 min or so to open the head and pull out the line. Any suggestions on how to successfully use the bump auto feature??
The thing I see the most is when too much line is wound into the head at once. Then you start to get hangups, so just be very cautious and precise on putting the correct amount of line into the head. This varies on whichever head you are using so make sure and follow the recommended amount when you are refilling your line.
Left store before pulling trigger on this. Wanted to do one final research. You did awesome appreciate it.
Only thing I wanted to know because Im a noob is.. When it does run out of wire, are you refilling it with like a cheap under $10 thing of stihl line OR do you have to buy that $40 all inclusive plastic head each time you need to replace line?
I'm glad this helped and yes, you can replace just the line in the head. Thanks for watching!
I would let it warm up before going full throttle. Great review though I have this same unit and I love it
You’re right. Thanks
pete ziriaah damn bought mine today and was excited to use it and went full throttle without even thinking.
You actually don’t want 2-strokes to idle, you’ll foul the plug
@@DaPoon253 if you let it idle for long period of time you are correct
@@DaPoon253 your right but I let mine file while it’s warming up, after that when I set it down I’ll shut it off. Even if it’s really quick
Should I get the more expensive one - STIHL FS 56 C-E $300 or the cheaper one Husqvarna 128LD $250 ? Thanks in advance.
Tough call. Both are good machines. I would compare warranties, parts availability in your area, and serviceability if needed. These things would be what I would be looking at to make my decision.
@@WesternEquipment Thanks for your information.👍
I have both, sthil for 13 years, starts every time, knock on wood, the husqvarna 6 years, problems started after 2 years, I'm done throwing money after bad and still can't get get it started, I wanted to like it but I don't have time to mess with it when it is costing too much and not starting, go with sthil, it will save you a lot of headaches.
@@roadrunner694 Thanks for the advice. 👍
The 128 husqvarna only lasted me three summers, only home use, never mistreated, I replaced the carburator, coil, sparkplug, fuel lines and still wouldn't start, I just gave up on it,I liked it because it was attachment capable, but the quality is not there, my fs55 sthil starts on first or second pull,after twelve years.
Why didn’t they put a grease fitting on the shaft for sprocket grease?
Just bought one today, trying it out tomorrow!
Awesome! I hope it went well!
most ppl have the most trouble feeding new line into the head & what was it you never covered ?.
Stay tuned! I will be doing a video on the different cutting heads and how to use them soon! Thanks for watching!
Awesome video! You did a great job explaining key features and the right way to start it up. Also kudos for showing the parts to keep an eye on for maintenance. Stihl should hire you to demo their products.
Thank you and I am glad you enjoyed it. Do you have this unit?
My new FS-56 RCE came with a 26-2 cutting head. It is a lot easier to load than the 25-2
Hello. Great demo & review, thank you. I just got the FS56RC-E & was wondering if a rattling noise when idled on the ground is normal? When I set the line trimmer on the ground there is a rattling noise that sounds like its coming from the shaft at idle speed. Other then that it seems great. Runs fine & goes away when I give it gas. I was wondering if this is normal with this model because my previous trimmer was a FS80 & doesn't make this noise.
This may just be because the carburetor needs to be adjusted just a little bit to make it not idle so hard. Good question and thanks for watching!
I wondered the same thing, I asked my local guy. He said it is completely normal, the clutch makes this noise when the shaft is spinning almost fast enough to disengage the clutch
@@deeznuts8967 I tried adjusting the carbs, checked the flex shaft & re-lubed. Still made the noise. I ended up tightening the 3 bolts in a row on the bottom side of the engine cover close to the trigger & that has fixed it! Hope this helps
I had mines for about a week & I love it! Great demonstration on it!
Nice I am glad you are liking it and thanks for watching!
I just purchased this unit today and this is my first time operating a weed eater. So, my beginner question is, how do I know when to replace the string? I should have asked this question in the store, but, I was all tied up in how to get it started and use it.
Awesome, I hope you like it! So when you notice no more string is coming out when you bump then head on the ground it is time to take the cover off of the head and see if you are out of string or if it is just broken off. I wish there was an easier way to check it but that is really the only way. I hope this helps and thanks for watching!
@@WesternEquipment , thank you for responding. Yes, this helps!
Mine has notches you put your fingers in them to turn. i feel it’s difficult to turn. I won’t buy this brand again They (the store)switched out to an old school head I have to wind, not happy .
Great video. I would have liked to learn more about the msrp price and how to switch to a saw blade attachment.
You can check out must of their pricing online at StihlUSA.com after you chose a dealer and then I have another video on the channel going over the blades that you can check out as well.
@@WesternEquipment thank you!
Hi....nice demo. Thank you....I just bought mine. Use to run a 90 r.... Now have the Fs 56rc-e. .this is more for light weight use?.....Have pretty large property.
Yes, this is going to be more of a residential model that the FS90R. Thanks for watching!
yeah, very nice trimmer. However, It would be nice to know if this unit can accept a cutting blade. Note some units like the 94 straight shaft will not take a blade.
It is not suggested to use a blade on this unit either.
How about showing the blade being used on it and the handle bars. I'm really curious if it can handle the blade.
You should not use the metal blades on this machine.
Could you please do a review of the FS91R? - that would be awesome
Trying to decide between this and the four stroke fs91
Both are good trimmers. You will get more power with the FS91 and the ability to use the metal blade attachments safely. I hope this helps and thanks for watching!
I did my research , Stihl and Milwaukee are the only trimmers made in the USA , problem is finding a placed that sells them ?
Both of these companies have a dealer locator tool on their website! www.stihlusa.com/ I hope this helps and thanks for watching!
@@WesternEquipment Thanks so much , I tried Menards and Home Depot . no success
Nice demo trimming the building & concrete there. I was hoping you' d show this trimmer working through some tall grass & weeds to lite brush that i'll encounter in my yard. I guess i'll have to watch other videos.
Nice video sir! I work with a crew that uses the fs91 but for my own residence that would be overkill. This model is just right! Great demonstration as well!
Thank you so much for the comment and thanks for watching!
What blade can be put on a FS65RC Stilth weed eater?
I have the same exact model very reliable had over a couple of years and I use the pre mix but I never use half choke I only use full choke of the trimmers been sitting and then I squeeze the handle to shut the choke off and runs fine after
Love to hear good experiences! Thanks for watching!
That black plastic ridged part on the shaft between the handle and trigger, is it meant to spin round and round? And what’s the use for the part?
Great video! I just purchased this trimmer. Starts good, runs good. After running hard for a couple hours the very first day, when it idles it intermittently makes a high squealing noise. Not an engine noise, but like something is rubbing, or catching. Only when at an idle. Any thoughts? I do have a video of the noise, if needed. Thank you!
This is interesting. You could try emailing me the video at brent@west-equip.com and I will see if I can give you and answer. Thanks for watching!
@@WesternEquipment thanks! I'll send the video
Hey. Did you ever find out what the noise is or if its normal? I just got a FS56 & if I let it idle while sitting on the ground there is a rattling noise that sounds like its coming from the shaft. It runs great & only makes the noise when left in idle while on the ground. Was this the noise yours was making?
Clutch problem
I do enjoy my FS56RC and your equipment review! I do have a question: how do I grease the trim head?
I’m glad you are enjoying your trimmer. The way to these this is to take the head completely off of the shaft and then take the cutting unit off of the head and then pack grease into both sides. Thanks for watching!
@@WesternEquipment Thank you for the information!
Goes well for tall grass or fs 70 is better?
An FS70 would have more power than this unit.
If you can, can you talk about what attachments can fit a blade, please? What types of blades there are? Also, what applications require a blade?
Check this video out th-cam.com/video/0jaodToSV-U/w-d-xo.html. I think it will answer most of those questions. Thanks for watching!
@@WesternEquipment excellent, thanks!
you didn’t cover greasing the gearbox? lots of newer models have removed the grease nipple, but it still needs maitenence
You are right. I will have to hit on this in another video. Thanks for the heads up.
Thanks for the actual demo!
Helps a ton
Glad I could help. Thanks for watching!
Thank you. Great video. I just bought one today here in Barbados. Had a great demo before I left the store but could not remember all that was said. Can't wait to try it out.
Awesome! I hope you enjoy it and thanks for watching!
Did I ocall o
🇧🇧🇧🇧
So iv had mine for a few months now and lately iv been starting and running it and it shakes a lot and i don’t know what it is!
This could be a few different issues. I could be a fuel issue as in the machine may be pulsing so it could be your fuel filter or carburetor. Another thing is the plastic sleeve inside the shaft that protects your drive cable could be worn causing that drive cable to be flopping. Also you might check the screen on your muffler because it may be clogged causing your machine to have a hard time breathing. I hope this helps and thanks for watching!
can i use this for commercial lawns?
Of course! Especially if you are only going to be using a string head.
Can you use this for commercial use or no
hello so i recently bought the fs56rc and bought the stihil ultra HP oil , do i have to add that to the gas tank? the dealer i bought it from put gas but not sure if they put that oil in
You need to mix that oil with your gas in the ratio that it says on the bottle. mix it up in your gas can and then keep that can separate for your weedeater. You only want to run that as/oil mixture in your weedeater or other 2-cycle engines.
thanks ! only problem is they left it like 50% full and dont know if they expect me to add my oil but i will ask the dealer and same goes for a stihl bg55 blower right planning on getting one aswell, is $140 a good price used or new better thanks
Could you do a video on how to restring it please?
I will get it on the list. Thanks for watching!
how long does the strings last
Straight through wind clockwise, I don't fill the spool rite up though or it can get too tite!
Would have liked to see how the line is loaded
If you go on our 247Parts channel i have videos over a couple of different head options and how to load them. I didn't show that in this video because of the fact that you can change to different heads.
Just bought a like new 56 2nd hand for $100. Owned a55r for 15yrs or more put it through hell and never let me down. Love my stihls! How does echo compare anyone ran them side by side over long term?
I have one that will not spark. I’ve tested the new coil and new plug and it still won’t spark. I’ve bypassed the switch also and will not spark. Any suggestions?
Is the spark plug gapped correctly?
@@WesternEquipment yes.
@@WesternEquipment yes
Excellent explanation. Details at best and well expressed. Thanks brother. Cant find anything on your clips on how to start a cold chainsaw. Thanks anyways!
Why didn't you tell Gearbox maintenance. Because my Fs56 had be placed replaced
I wonder if they are going to be on sale Nationwide for Father's Day??
I just picked one up for my dad today because our local stores sale ends today at 6
Good question, I will have to look into this. Thanks for watching!
What is the diameter of the shaft,also can we install a weed blade steel wire ?
Thanks
Shaft is 1" and yes i think you could get by with some steel wire but you would need the FixCut Cutting head.
1does it come with a speed feed head or do I have to buy one?
Depends on what you mean by speed feed. It does have the bump head that will let line come out on the go by bumping it on the ground. Now as far as the fast loading head that would have to be a separate purchase. I hope this helps and thanks for watching!
Do you have any videos on how to restring this model? Thanks!
Yes, I have videos on restringing the heads on our other channel 247Parts.com.
Is it normal for this trimmer to vibrate alot at idle?
This is hard to say. Is it just vibrating or is it trying to die?
How about the use of the strap?
It works well, especially if the machine is too heavy for a person. I personally do not use the strap but it is a nice option to have. Thanks for watching!
Can i use 0.13 line for this trimmer? Please let me know
Unfortunately the head that come with this trimmer only accommodates up to .105 line. Good question and thanks for watching!
Still is a good brand overall. Good investment.
Very good brand! Thanks for watching!
Please do a tutorial on loading trimming line
I will get this on the list. Thanks for watching!
What size line does this model take?
Great video!
It can use various different sizes depending on which cutting head you use, but it will come standard with the orange .095. Thank you and thanks for watching!
@@WesternEquipment awesome!
Thanks for the response.
Excellent video!
I have a Stihl fs56 RC string trimmer with a auto speed feed trimmer head on it my trimmer head is bigger than your regular string trimmer head
Nice! Do you like it?
What mat do you have in your desk?
hey why did mine only come half assembled , i still need the head attachment and i have the fs56rc-e that i got for $200
Did yours come in a box? they should be fully assembled from wherever you bought it from?
@@WesternEquipment no it came by itself with some instructions Zip tied together, got it at ace hardware new
@@WesternEquipment should i return
Looking to get this after using the fs55 I have been borrowing and it is very reliable
Great choice. I hope you enjoy it and thanks for watching!
Thanks for the review, question is this unit shorter than the fs 91? I’m 5.9 so the echo 225 is perfect long enough but I want to switch
So the FS56RC-E measures about 69.5" and the FS91 measures about 73". This is the full length from back of the engine to the head. I hope this is helpful! Thanks for watching!
I’ve used mine twice so far around the house. I will also use it with a blade for clearing brush on my 5 acres up north. Can’t wait to see how it holds up!
Let me know how it does with a blade. It is not recommended to use a blade on this model so be careful!
@@WesternEquipment I’m going to get a blade guard for it. What’s the reason they don’t recommend a blade exactly?
I was going to go with this unit for my mowing business but went with the Srm 225 instead
Probably not a bad choice. Thanks for watching!
@@WesternEquipment you bet.
How's that 225 work out for you? Mine was bunk.
I have the same weedeater!! I found the strap makes it more annoying to use
I agree, when I use one personally I do not use the strap. Thanks for watching!
Wanted to see you put the string on.
I have some videos on doing this on our other 247Parts channel. Have you checked those out?
Does it spin counter clockwise??
Yes, it does. Thanks for watching!
Yessss!!! Finally someone video is really GREAT!!!!! very interested to watch.
Thank you and thanks for watching!
What about loading wire..?
I will have a video on loading the head coming out on my other channel 247Parts soon so stay tuned and thanks for watching!
Does this.model support attachmentd such as the pole saw
Greetings, Great video, well explained! Q: Due to the engine size, Can I put a weed plastic blades kit to the FS56? I will appreciate your response.
Yes, you can put the plastic blade kit on this machine. Thank you and thanks for watching!
Thanks, I'm looking at buying at one
Glad I could help and thanks for watching!
I got a brand new one. I just can’t make it start. I’ve been watching videos and tried all the recommended tricks to no avail
I wish I had some advice to give. May just need to take it to a local repair shop... the advice nobody wants to hear. But thanks for watching!
If you got a new one contact the place you purchased it from and send it back under warranty.
Do they make edging attachments for this trimmer?
You could by the edger head assembly and take off your trimmer assembly but as far as a specific edging attachment no. You can change the angle of the loop handle to make it easier to flip over for edging with you regular string trimmer head. I hope this helps and thanks for watching!
hey i have my stihl fs56rc leaking from the choke lever and i store it inside a garage engine upwards against the wall , only used it about 5 times
new machine
Did you see any bite prints?
does there fs 38 &40 have the ability of different head attachments? or is it the 56 rc -e? just curious
You can add different heads to all of them but only certain models accommodate certain style heads. Did this answer your question? Thanks for watching!
I have this and fs 111. The 111 whole different level but cosidered brush cutter
Yes, this is true because it had a solid metal inner shaft which allows it to accommodate a metal blade for brush cutting or trimming.
Dose this take mixed fuel?
Yes, it does. Thanks for watching!
Yes it does
How easy is it to re-string the cutting head?
Not bad at all, especially if you buy the AutoCut EasySpool heads.
Follow the owners manual and this thing will start in 1 pull every time maybe 3 if it's sat dormant for a few months. I own 2 Husqvarna chain saws a 440e and a 460, both of them I have to mess with for a 1/2 hour to get them started. I'm selling them and getting Stihl's
I have the older version of this. FS55R. Still runs great 👍 I love the gaurd on the stihl. Took it off once and it blew grass all over me. Great review! 🙂
Thanks for the continuous support!
My dad has a 55r and it is around 20 years old. It starts on the 1st pull every time
Please help me... Bought a brand new one and for the love of God it can't start no matter how many times or how hard I pull
@@alvesthegreat Do you have the choke engaged?? The engine cannot start if you're choking it out. Try starting it with the choke wide open and if it still refuses to start, try squeezing the throttle completely while you're pulling.
What model do you have?
@@psacgvolunteers I have the fs55....
I did choke it... But it's so hard to start my shoulder is now sore....
A friend of mine came and emptied the gas... Then he started it then refilled it.....
Weird
what fuel do i use? brand name?
I would use the Stihl brand MotoMix.
Does your shake really bad just idling
This one particularly did not. Some do though and most of the time a carburetor adjustment will fix this. I hope this helps and thanks for watching!
@@WesternEquipment well I found out y mine did there a plastic piece that stops the flexible shaft from going up to far it was broken and down inside the tube $1.50 fix
ive had a cheap 100$ weed-eater for 20years before somebody ruined the motor.
this one better run for 50years for the price.
I think this is doable with the right maintenance!
I think you missed one key maintenance point: replacing string...?
You are right, but I now have videos on our other channel, 247Parts, to show how this is done. Thanks for watching!
is the machine a two cycle or 4 cycle unit??
2 cycle.
Good demostration you said very good I give 1000👍to your way of explaining love it and sound is quite
Thank you so much and thanks for watching!
Can you pit a pole saw attatchment on this model?
Since this is a cable shaft, it is not recommended.
Price Please
You would have to find your nearest STIHL dealer for pricing. They have a really good dealer locator on stihlusa.com.
Excellent, very good demo. Thanx Sir.
Thank you and thanks for watching!
What size string is this?
This one has .095. Good question and thanks for watching!
Are you guys selling this one any time soon?
Well we are always selling these but unfortunately we can not sell them on our website. They must be bought in-store. But feel free to check us out at west-equip.com to see if we have a location close to you!
Mine didn’t come with a ‘bump’ head. What happened?
Interesting... What style of head is on it?
Mine came with the aluminum head with 4 string manual load
is there a way to grease the gearbox on the 56?
You can take it loose from the shaft and grease from that way I believe.
Nice review but it would be nice to show refilling line - that is always a pain