High Performance: Standard Cat6 Three Piece Design Mod Plug

This 3 piece system makes terminating Cat6 quick & easy. The spacer bar acts as the stopping point for pair separation. Add the liner bar to maintain wiring configuration, and you are done. Simply flush cut the conductors and slide assembly into the connector and terminate.
EZ-RJ45® CAT6 Connectors: bit.ly/2b9YcBZ
Cat 5/6 Cable Jacket Stripper: bit.ly/2aYWsLe
Professional Electrician's Scissors: bit.ly/2blpUgI
Tele-Titan™ Modular Plug Crimp Tool: bit.ly/2aZ7HmJ

[@HawkGTboy]

Thank goodness for this video, the printed instructions were microscopic and impossible to read. They were practically printed on a post-it note.

[@enriquetrujillo7864]

Great job explaining the proper steps in installing the RJ-45 high speed modular plugs! Thanks

[@Blackcreekstudios]

Wire guide does not have holes in it. How did you push the wires through it when there are no through holes ?

[@ttd075]

Thank you for the video! I thought I bought the wrong plug or doing it wrong, thank you for explaining what each part do and how far to cut, I was able to make perfect cable again!😊

[@doylemaleche9937]

Great video but music way too loud.

[@nofear2792]

I know this video was years ago but why did you send edit out how long it took you to get the wires into the spacer bar? LMAO I know because they are a waste of time and it harder to use those things.

[@stonent]

Yeah we accidentally ordered some of these and I'm trying to figure them out. Having to deal with small pieces while on a ladder for instance isn't helpful.

[@j4c0r4m0s]

How to make a 568A?

[@stonent]

Just swap green and green/white with orange and orange/white
That's the only difference, the oranges and greens are swapped.

[@j4c0r4m0s]

How to make a 568A cat 6 with Three Piece Design?

[@hellowill]

Jacó Ramos swap green and orange