I started CPAP last night for the first time. I chose this mask and I'm very happy with it. I didn't feel claustrophobic at all. I have it on a table behind my bed and there was no hose obstruction at all. I'm a side sleeper and toss and turn a lot. Not sure if I did that last night, but I definitely felt better when I woke up today even though it was a short night of sleep. I'm a night owl in a morning person's world.
Ugh I almost cried last night I was so frustrated. It was night 2 with this mask and for the life of me I could NOT get a leak to stop from the nasal cushion area. The first night took a min but I tightened it really tight. After watching this video and resizing myself with the chart I think a smallwide would greatly improve things. I wish I had been “fitted” before they gave me my supplies and just assumed. Thank you for the video, I have some hope again this will work with the right supplies.
This video and all your others have helped me out so much, This mask in your demo is the one I just picked up yesterday, I have never had a CPAP machine before, But I chuckled when you said some people try to put it over their nose, That was me last night I was up all night cursing this hose assy air was shooting up into my eyes driving me nuts. So now I will try it the right way tonight. Awesome Videos I subscribed and liked all your videos. Chris from Canada.
Last night was my first night with this new mask - and i hated it! But before I decided to get a different one I googled for a video on how to properly put it on and found your video. I did not even realize there were holes at the top of the cushion for my nose... and giving the details of where each part should sit on my head was very helpful. Hoping tonight is a better night.
Thank you so much for telling us there is supposed to be a constant flow of air out the front AND top! I was sure the top had a leak. And with the resmed nasal pillows I use to have the flow of air was only when I was breathing out. Such a simple thing was huge to find out as a new mask user! 🤩
@@CPAPmyway I found your video looking for information on this mask "leaking". I understand it now, but still have a question. Won't cpap's like the airsense 11 register this as a leak and tell you to adjust your mask?
The first pillow I have had the best experience with a full face mask is "My Pillow" pillow and this particular mask, but because I am a very small female, it is difficult to find a mask that actually fits me. Kids size is too small, the XS in adult is supposed to fit but in the Quattro it leaked air all the time, but this new one seems to be better, and once I get the right pressures I need, and the fit that works, I am good to go. I have had, in my opinion, three great nights since beginning keeping track with "MyAir" at ResMed. One really terrible night with a score of 44, and then I scored a 99, a 75, and an 85. Not so bad for being on four days straight.
Nostril fitting is crucial for proper airflow. I was using large pillows and getting 10 to 20 episodes per hour. Changed to medium. Reduced that to 1-3. This mask looks like it could be a problem with getting a good seal with no leaks. I'm waiting for one now. I'm using the N30i now. It works great. We'll see if the F model is better or worse.
Replace the cushion every 30-45 days?? I get about 8-12 months. This cushion is not the F20 memory foam cushion that does need replacing every 30 days, that has 3 in a pack. The F30i cushion is about $80 for one cushion, that's nuts to replace it every 30 days. Edit: ResMed is recommending replacing the F30i cushion every 6 months.
Low audio, after cranking the volume up for this, you will have lower for other videos. Also, I am still a bit unsure about sizing. Perhaps there is a way for us to take a profile picture near a ruler and select the right size?
Is this more comfortable than the f30? I just started yesterday with the f30 woke up at 2:30 am feeling like I couldn’t breathe, ripped it off, and couldn’t get back to bed with it
Thank you very much for this informative video. It helped me figure out how to remove the mask from the tubing so I could clean it. Do you think the actual mask with silicone should be removed and washed with soap and water daily? I appreciate your video a lot! The ResMed official video was good but too fast!
Is air supposed to come out where the tubes connect to the plastic front? There is an open vent on each plastic area where it clips on. Plus there are the 2 lines of holes on the front where air comes out. It seems like a lot of air coming out of the plastic part of the mask. Is this correct? 3 open areas of front of masks where air is coming out makes this masks very noisy. Thank you for your help.
Can you compare the F30i with the dreamwear full face? I have the dreamwear full.it looks like this one will be more snug against your nose. I hope the VA has it
Thank you for showing me how to take the clips off the front of the mask. I've been looking all over online and they show you it already taken apart. How can clean it if you can't take the clips off to clean it? LOL So thank you for helping me out with that!!
You know it is really tough to say what would be best for you, because every face is so different. Side sleepers typically do well with a mask that connects at the top of the head. You get more side to side movement. I have a couple links to those style CPAP Masks below. You may also want to look in to new FaceMapper fitting service we have. It will map your face and tell you the best CPAP Mask for you. FaceMapper Service cpapmyway.com/store/facemapper-custom-cpap-mask-fitting-at-home Side Sleeper CPAP Masks cpapmyway.com/store/cpap-masks/nasal-masks/resmed--airfit-n30i-nasal-cradle-cpap-mask cpapmyway.com/store/cpap-masks/nasal-masks/dreamwear-nasal-mask
I would ask two questions. What keeps the mask sealed 'upwards' with no adjustment on the headgear hose? And, how does one find comfort laying your head on the pillow with that rubber hose against your face?
1) As you tighten the top strap the frame is pulled back on the head which tightens the seal up against the nose. 2) It is thicker than headgear straps for sure, but getting the tubing away from the body does give a lot more freedom of movement. The tube/frame on the side of the head does provide some negative feedback from users, but not too often. It flattens out pretty well when you lay on the side and the air redirects to the other side.
i have the f 30 problem is the nostril holes dont seem to be large enough, I did have the dreamwear and had to use medium wide. The f 30 doesnt have that option. i wear medium but if I cut the holes marger and cut out the middle partition would it fall apart? Thanks for any input
We always discourage "Mcgivering" your CPAP parts. They are designed to function to pretty specific standards to ensure that CO2 is properly flushed ect. So unfortunately there isn't much you can do on that one to get it bigger. You should checkout the Amara View though. Similar fit with a large size. Link below. cpapmyway.com/store/cpap-masks/full-face-masks/respironics-amara-view-full-face-mask
I have the Amara View and I cut the divider between the nose and mouth and it did not collapse and felt much better than before. I tried it on an old cushion I was ready to throw away. I ended up getting a couple more weeks out of it. This worked for the Amara I don't know about the F30, try it with a cushion you are ready to trash.
there's the flaps inside the mask near the pressure inlet. what are their function? When pressure is constantly on, those flaps never move, so the holes near it never function as an outlet
should I be hearing air or should I hear air being leaked through? I am not sure if the mask needs to completely cover my nostrils or should it rest right below my nostrils?
You stated that the headgear was the standard size. The frame comes in small, medium and large. I assume you meant the medium size. Thanks for the video!
Ours was very frustrating. It kept saying to adjust the mask, and we followed all the steps, so I am not sure why it kept saying that. Additionally, my husband struggled with breathing while having it on. I hope we are doing something wrong; otherwise, this machine and mask aren’t helping my husband's problems!
That is no good. If slight tightening doesn't help then you may want to go with a more traditional style like the Vitera full face. Link below for reference. cpapmyway.com/store/cpap-masks/full-face-masks/vitera-full-face-cpap-mask
That is my primary complaint with this mask. Not only does it leak around the corners of my mouth at my cheeks, it does it quite noisily making a highly disruptive farting noise. That makes it sound funny - it isn't.
Do you have any guidance on sizing the frame? I have a larger head, just a little over 8 hat size, and I don't know if I should go larger than the standard frame or not... looking for guidelines.
Not sure if you found the information you were looking for? But, Small frame. 576-618mm Standard frame. 619-653mm Large frame. 654-695mm. With a tape measure, start under the nose, and go around the top of the head, not too far forward, and not too far back. Hope this helps 🙏
I have this mask and like it, but can I get the foam pad like the memory foam full CPAP for the mask in this video. I canmot get a good seal halfway through the night.
First time user. Have my maskready to use tonight. I only open mouth only after I am asleep, but I am confused. Can I breathe in and out of my nose with this mask on even with mouth closed?
CPAPmyway thank you responding. I am having trouble adjust as I am 5 days in and wake up feeling a little claustrophobic. It isn’t bad its very comfortable its just I wake up completely with face covered and my nose portion lets out air if I shift positions. Maybe just need to make the top portion tighter not sure. And I dont know about wrinkes on the face with this mask long term. I wont give up on it though. I have the nasal pillows mask too so tomm I will get a chin strap too just in case.
I want to try this mask but sleep on my side a lot and my supplier said that the tubes would be cut off from air since the air tubing would be pressed between my pillow and face, does anyone have that problem?
My husband has sensitive skin and uses the Phillips Dreamwear full mask. The material it is made of looks the same as this mask. Can anyone tell me if the materials are identical on the mask...ie the flexible cushiony part
I’ve been using an Apap machine for a year. I purchased the f30i mask. The first night with it the air stopped flowing all together after 30 mins. I restarted the machine and the air stopped completely after 30 mins again. There are no leaks and it is professionally fitted. The clinician in person, checked all of my equipment and could not come up with a reason why it’s happening. Please help if possible . This mask is so much more comfortable then my full face mask. I use my Apap religiously every night.
I am sorry that you are having so much trouble. The only reason that the CPAP should be shutting off is during really high leaks. The machine will "think" that you have disconnected the mask and then turn itself off. If you are not having any leaks then there may be an issue with the CPAP.
If the straps aren't working for you, then you may want to consider a different style Full Face. Links to options below. cpapmyway.com/store/cpap-masks/full-face-masks
I have to use the Snugglehose cover for my 6ft hose to prevent rainout. I keep my bedroom at around 58 degrees, mostly due to menopause but I’ve slept better in a cool room with a fan blowing all my life. Will this be an issue with the tubing that runs from the connector down the sides of my face?
Is this a new mode, as of this video being made? I ask as I’ve tried a very similar mask several years ago, but even the large wasn’t large enough as if it was against the bottom of my nose the bottom seal would sit right on my bottom lip so the moment my mouth opened at all it broke the seal
Ys the AirFit F30i was pretty new when we made this video. There is an Amara View and DreamWear full from Philips that are similar fits to this one, and they have been around much longer.
Sorry if you have gotten asked this before. I have a very large head and was interested in one of the "i" seriies masks. Have you experienced anyone who has had too big of a head for even the large frame for these masks? Im worried it wont fit me.
you should order the F30i with a Large frame if that is the case. Large is pretty big. You sill see that selection on our website with the link below cpapmyway.com/store/cpap-masks/full-face-masks/resmed-airift-f30i-full-face-mask
I have had that happen to me a couple of times, and I just adjusted the mask until it stopped. One thing I have noticed since beginning treatment with this mask, is as long as you get a good fit and no leaks, it seems to be clearing up my dry eye condition. I have to do a new sleep study, since I haven't had one done since 2006 and so I have no idea what my pressures should be now. I quit using the old machine a few years back because the Mirage Full Face Quattro was killing my nose and forehead, and I could very rarely get it to stop leaking.
I started to use this mask but it seems like the pressure gets so high when using it compared to the n30 I have to shot off machine and restart to lower the pressure any suggestions? I s always change settings on the machine for the mask as well.
That is interesting. If you have leaks sometimes the CPAP will increase pressure to account for those leaks. Do you think that the F30i has any substantial leaks on the seal while you are using it?
@@CPAPmyway I don’t think it’s the seal. The machine pressure gets up to 12 and it makes a lot of noise thru the vents I assume it’s also me opening my mouth. I adjusted the pressure down my avg has been 8 so I set it between 4-10 to see it was a little better last night but I prefer the n30 issue is I’m opening my mouth might try chin strap I’m going back and forth between masks unfortunately
Resmed always tries to come out with new*cough*copied*cough masks but always forget they also have the Airmini, which is my preferred CPAP machine. They don't make adapters for their new masks and I always have to end up waiting until they realize it. I love the Dreamwear Full Face mask and was hoping I could get to use it on my Airmini and this is the closest I can get. Hopefully I don't have to wait until Covid kills me as a frontliner until they release the adapters.
I know that has been a serious concern lately. If you can avoid a mask with magnets it might be best I would think. The Evora Full is similar without magnets. cpapmyway.com/store/cpap-masks/full-face-masks/evora-full-face-cpap-mask
There are sizing templates available that you can print to find out in advance. You can just google "fitting template" for whatever mask you are interested in. It will most likely come up.
Does it make marks or water type blisters Festoons Malar bags Edema bags on your cheekbones in the morning from the Pressure on your cheek bone from the plastic piece in your mouth
There is a great Sizing template for that mask that can be printed out for sizing at home. Use the link below and scroll to the bottom of the page to doanload it. www.resmed.com/us/en/healthcare-professional/support/masks/airfit-f30i.html
@@CPAPmyway Thanks for this. I am really looking for some way to measure the right head gear size for me. The template seems to be just for the mask, or am I missing something? Thanks again.
on this f30i how tight is too tight? i like it looser but i feel like even though the machine says great mask seal, that i will leak during the night, but too tight then it kind of hurts after a while....help?
The tubing attachment was too long for my face. The tubing pulled my hair. I hated it. I am trying one with that tube outlet on the front. See how we go. This is the 10th mask I have tried. So far not success.
You see my head, will it work for me? The numbers are 18/14 with all the facial hair. Where do I get the measuring card? I currently am using an F-20 AirTouch, Medium Bi-pap. Will the entire headgear fit into a SoClean2, this is the part I don't like about the AirTouch is the memory foam cannot be put into my cleaner or get wet!!
The mask should fit your head fine. I have a link below to the mask on our site as well as the measuring/fitting guide for you. It will go into the SoClean just fine. www.resmed.com/us/dam/documents/products/Mask/airfit-f30i/fitting-guide/airfit-f30i_fitting-temp_web-inch_eng.pdf cpapmyway.com/store/cpap-masks/full-face-masks/resmed-airift-f30i-full-face-mask
Hi all, I’ve just converted to this from a full face mask, I have issues with leaks most nights, maybe because I thrash about in my sleep when I stop breathing! Any tips? Thanks in advance ✌️
We usually tell customers on this style full face to size down. So if you use a medium try a small. Especially if the leaks are around the sides of the nose.
The DreamWear and this F30i are very similar in fit and design. The difference has been more based on personal preference of Brand. There are some minor differences, but both work very effectively.
Has anyone else experienced this mask sticking to the skin around their mouth? The material in this area is smooth and it doesn’t allow for easy movement.
Not a great mask for higher pressures. Also not an easy mask to utilize if you're using a eye mask to block out light. Only one strap to adjust for fit. For some - it might be a godsend. Try it.... Not so good for me.
More than likely if you are hearing a lot of noise then most likely the mask is not fitting quiet right. If you have adjusted it as much as possible, then it may not be the right mask for you. If you purchased it with us we have a 30 day exchange guarantee, and would be happy to exchange it for you. So that you can try something different.
Actually it is SUPER noisy. I measured mine at 65 decibels. Not cool. I am wondering if the frame is too small for my head? I MUST say that the mask is extremely comfortable and I have not had ANY leaks. Just the noise, it's far noisier than the F20 or F30 by a LONG SHOT.
So when you lay sideways you'll NOT only be laying on the mask air tube. Now you get the MAIN tube along the side of your face!!! you ll wake up looking like someone wacked you with a leather strap bruised in time sleeping on all that shit!!
@@CPAPmyway "CPAP Tube should stay above your head to allow movement from side to side." Yea like we move our head in a perfect axis NOT..This isn’t rocket science. Yea like the tube off the top wont get between your pillow and the headrest and get hung up. The friction of the long tube hanging over the bed and back up to the machine will greatly effect how the top of that at headband reacts since there are NO straps near that tube attachment to offset that friction. NOW you have the whole headband twisting sideways enough to break the sensitive seal at the nose and or. The nosepiece pressure changes and stress one side of the soft tip of your nose. Like I said this designs is shitty all the way around. People MOVE their heads NOT just side to side; they also move their head up and down. I use a ResMed Mirage Quattro Full Face CPAP Mask which you can tweak the pressure of the upper nose part of your face fantastic design yet my supplier says that mask is being discontinued. Also its going on a year me using the same face soft seal and hard mask and its still looks like new and I dont use one of those CPAP cleaners or a SO Clean The soft seal never lost its integrity as well as the check valve. Ill do my own vid to save Americans millions buying unnecessary softy seals and mask I also go weeks before washing out my humidifier tray. I do that vid and I don’t sell anything or a product,
What the HELL.. MORE hosing to clean out!!! I was told ResMEd was redesigning their full face mask and WHY. I have NO problem with the hose and roll over no problem, Res Med is SCREWING us with this piece of shit design!!! WTF NOW you lay your head sideways and have a BULKY air tube up against the side of your face!!! Not just a flat Velcro strap like the old design. HTF designs this CRAP!!!
![fellow fellow - PROUD feat. INK WARUNTORN [STRING QUARTET]](http://i.ytimg.com/vi/BQrVkMPTdHE/mqdefault.jpg)
It's nice to hear someone actually demonstrate the mask without an accent from Down Under and slow enough to understand.
Glad that you enjoyed it.
I started CPAP last night for the first time. I chose this mask and I'm very happy with it. I didn't feel claustrophobic at all. I have it on a table behind my bed and there was no hose obstruction at all. I'm a side sleeper and toss and turn a lot. Not sure if I did that last night, but I definitely felt better when I woke up today even though it was a short night of sleep. I'm a night owl in a morning person's world.
Thank you for the feedback!! Have a great day!
I start CPAP therapy in the next week or so. Just curious if you still use this mask and do you truly feel better after being on CPAP for a year?
Ugh I almost cried last night I was so frustrated. It was night 2 with this mask and for the life of me I could NOT get a leak to stop from the nasal cushion area. The first night took a min but I tightened it really tight. After watching this video and resizing myself with the chart I think a smallwide would greatly improve things. I wish I had been “fitted” before they gave me my supplies and just assumed. Thank you for the video, I have some hope again this will work with the right supplies.
Glad that we could help you with that F30i Full face mask.
This video and all your others have helped me out so much, This mask in your demo is the one I just picked up yesterday, I have never had a CPAP machine before, But I chuckled when you said some people try to put it over their nose, That was me last night I was up all night cursing this hose assy air was shooting up into my eyes driving me nuts. So now I will try it the right way tonight. Awesome Videos I subscribed and liked all your videos. Chris from Canada.
Last night was my first night with this new mask - and i hated it! But before I decided to get a different one I googled for a video on how to properly put it on and found your video. I did not even realize there were holes at the top of the cushion for my nose... and giving the details of where each part should sit on my head was very helpful. Hoping tonight is a better night.
Glad it was helpful for you. Good luck on the new Mask.
Thank you so much for telling us there is supposed to be a constant flow of air out the front AND top! I was sure the top had a leak. And with the resmed nasal pillows I use to have the flow of air was only when I was breathing out. Such a simple thing was huge to find out as a new mask user! 🤩
You are very welcome.
@@CPAPmyway I found your video looking for information on this mask "leaking". I understand it now, but still have a question. Won't cpap's like the airsense 11 register this as a leak and tell you to adjust your mask?
The first pillow I have had the best experience with a full face mask is "My Pillow" pillow and this particular mask, but because I am a very small female, it is difficult to find a mask that actually fits me. Kids size is too small, the XS in adult is supposed to fit but in the Quattro it leaked air all the time, but this new one seems to be better, and once I get the right pressures I need, and the fit that works, I am good to go. I have had, in my opinion, three great nights since beginning keeping track with "MyAir" at ResMed. One really terrible night with a score of 44, and then I scored a 99, a 75, and an 85. Not so bad for being on four days straight.
Elizabeth, I am glad you are being patient starting on CPAP . . . it takes 30 - 90 days to work out the kinks.
Nostril fitting is crucial for proper airflow. I was using large pillows and getting 10 to 20 episodes per hour. Changed to medium. Reduced that to 1-3. This mask looks like it could be a problem with getting a good seal with no leaks. I'm waiting for one now. I'm using the N30i now. It works great. We'll see if the F model is better or worse.
Thanks for the input!
Any update?
Thanks so much. Very good explanation and video. Appreciate your taking the time to do this.
You're very welcome!
Replace the cushion every 30-45 days?? I get about 8-12 months. This cushion is not the F20 memory foam cushion that does need replacing every 30 days, that has 3 in a pack. The F30i cushion is about $80 for one cushion, that's nuts to replace it every 30 days.
Edit: ResMed is recommending replacing the F30i cushion every 6 months.
not if you have insurance
Thanks! I'm glad for the video and yes I'm going to try it!
My nose flairs up wearing this mask, is it normal to do that? it hurts a little bit but I get used to it as I sleep
Ty ty ty! New to cpap. It’s nice to have a visual. Very helpful
Glad it was helpful!
Low audio, after cranking the volume up for this, you will have lower for other videos. Also, I am still a bit unsure about sizing. Perhaps there is a way for us to take a profile picture near a ruler and select the right size?
Here is a link to the sizing gauge.
document.resmed.com/documents/products/mask/airfit-f30i/fitting-guide/airfit-f30i_fitting-temp_web-inch_eng.pdf
Is this more comfortable than the f30? I just started yesterday with the f30 woke up at 2:30 am feeling like I couldn’t breathe, ripped it off, and couldn’t get back to bed with it
Thank you very much for this informative video. It helped me figure out how to remove the mask from the tubing so I could clean it. Do you think the actual mask with silicone should be removed and washed with soap and water daily? I appreciate your video a lot! The ResMed official video was good but too fast!
Is air supposed to come out where the tubes connect to the plastic front? There is
an open vent on each plastic area where it clips on. Plus there are the 2 lines of holes on the front where air comes out. It seems like a lot of air coming out of the plastic part of the mask. Is this correct? 3 open areas of front of masks where air is coming out makes this masks very noisy.
Thank you for your help.
There is an exhalation port on the front snd air will constantly flow out.
Can you compare the F30i with the dreamwear full face? I have the dreamwear full.it looks like this one will be more snug against your nose. I hope the VA has it
Will this prevent air leaks , I have tried like 5 different mask and they eventually start leaking air within a week at best
I think most air leaks is because the headgear stretches out. I'm looking at Vitara with 6 pts of adjustment
Great tutorial. Thanks for sharing
I thought it was a great tutorial too!!
Thank you for showing me how to take the clips off the front of the mask. I've been looking all over online and they show you it already taken apart. How can clean it if you can't take the clips off to clean it? LOL So thank you for helping me out with that!!
You are welcome
What's the most comfortable for a truck driver that is getting his first cpap. I sleep on my side and back. This is all new to me. Thanks
You know it is really tough to say what would be best for you, because every face is so different. Side sleepers typically do well with a mask that connects at the top of the head. You get more side to side movement. I have a couple links to those style CPAP Masks below. You may also want to look in to new FaceMapper fitting service we have. It will map your face and tell you the best CPAP Mask for you.
FaceMapper Service
cpapmyway.com/store/facemapper-custom-cpap-mask-fitting-at-home
Side Sleeper CPAP Masks
cpapmyway.com/store/cpap-masks/nasal-masks/resmed--airfit-n30i-nasal-cradle-cpap-mask
cpapmyway.com/store/cpap-masks/nasal-masks/dreamwear-nasal-mask
I would ask two questions. What keeps the mask sealed 'upwards' with no adjustment on the headgear hose? And, how does one find comfort laying your head on the pillow with that rubber hose against your face?
1) As you tighten the top strap the frame is pulled back on the head which tightens the seal up against the nose.
2) It is thicker than headgear straps for sure, but getting the tubing away from the body does give a lot more freedom of movement. The tube/frame on the side of the head does provide some negative feedback from users, but not too often. It flattens out pretty well when you lay on the side and the air redirects to the other side.
i have the f 30 problem is the nostril holes dont seem to be large enough, I did have the dreamwear and had to use medium wide. The f 30 doesnt have that option. i wear medium but if I cut the holes marger and cut out the middle partition would it fall apart? Thanks for any input
We always discourage "Mcgivering" your CPAP parts. They are designed to function to pretty specific standards to ensure that CO2 is properly flushed ect. So unfortunately there isn't much you can do on that one to get it bigger. You should checkout the Amara View though. Similar fit with a large size. Link below.
cpapmyway.com/store/cpap-masks/full-face-masks/respironics-amara-view-full-face-mask
I have the Amara View and I cut the divider between the nose and mouth and it did not collapse and felt much better than before. I tried it on an old cushion I was ready to throw away. I ended up getting a couple more weeks out of it. This worked for the Amara I don't know about the F30, try it with a cushion you are ready to trash.
there's the flaps inside the mask near the pressure inlet. what are their function? When pressure is constantly on, those flaps never move, so the holes near it never function as an outlet
Their so you can breathe with the mask on whilst the machine is off, as soon as the machine is turned on, and pressure returns, they close.
Horizontal... Record horizontal...
This version of the vid is for horses with blinders
Man, when the spam bots can talk to each other, things are getting sophisticated...
I have the airfit f30 pillows best mask ever last ages too
Thanks for the input.
should I be hearing air or should I hear air being leaked through? I am not sure if the mask needs to completely cover my nostrils or should it rest right below my nostrils?
It should be below your noise, and it is pretty quiet. So loud air noise would indicate a leak that needs to be corrected in most cases.
You stated that the headgear was the standard size. The frame comes in small, medium and large. I assume you meant the medium size. Thanks for the video!
The mask comes small, med, etc. The headgear is standard. I own this mask, and it is stamped "Standard" on the top of the frame.
Ours was very frustrating. It kept saying to adjust the mask, and we followed all the steps, so I am not sure why it kept saying that. Additionally, my husband struggled with breathing while having it on. I hope we are doing something wrong; otherwise, this machine and mask aren’t helping my husband's problems!
Sounds like a different mask may be a good idea in this case. This blog may be a good place to start for you.
cpapmyway.com/blog/best-cpap-mask-style
I used mine for the first time last night and hated it. It kept leaking air from my cheek areas.
That is no good. If slight tightening doesn't help then you may want to go with a more traditional style like the Vitera full face. Link below for reference.
cpapmyway.com/store/cpap-masks/full-face-masks/vitera-full-face-cpap-mask
That is my primary complaint with this mask. Not only does it leak around the corners of my mouth at my cheeks, it does it quite noisily making a highly disruptive farting noise. That makes it sound funny - it isn't.
@@jobo2612 the farting noise i think means there is water in the tube or mask
Is the air to my nose supposed to be cut off, I can't seem to breathe through my nose but if I try loosening it my CPap says the mask is loose.
You should be able to breath through your nose just fine if you have the mask on correctly. You may want to try a larger size cushion.
Do you have any guidance on sizing the frame? I have a larger head, just a little over 8 hat size, and I don't know if I should go larger than the standard frame or not... looking for guidelines.
Not sure if you found the information you were looking for? But, Small frame. 576-618mm Standard frame. 619-653mm Large frame. 654-695mm. With a tape measure, start under the nose, and go around the top of the head, not too far forward, and not too far back. Hope this helps 🙏
Thanks love mine!
I have this mask and like it, but can I get the foam pad like the memory foam full CPAP for the mask in this video. I canmot get a good seal halfway through the night.
Yes. Unfortunately, there is no foam cushion for the F30i
First time user. Have my maskready to use tonight. I only open mouth only after I am asleep, but I am confused. Can I breathe in and out of my nose with this mask on even with mouth closed?
Yes you can breathe through your mouth or you nose with this mask.
CPAPmyway thank you responding. I am having trouble adjust as I am 5 days in and wake up feeling a little claustrophobic. It isn’t bad its very comfortable its just I wake up completely with face covered and my nose portion lets out air if I shift positions. Maybe just need to make the top portion tighter not sure. And I dont know about wrinkes on the face with this mask long term. I wont give up on it though. I have the nasal pillows mask too so tomm I will get a chin strap too just in case.
I want to try this mask but sleep on my side a lot and my supplier said that the tubes would be cut off from air since the air tubing would be pressed between my pillow and face, does anyone have that problem?
The F30i should run fine even if the airflow is cutoff on one side.
What is the maximum pressure use for this mask ?
It is good for all CPAP and Bipap Pressure ranges.
My husband has sensitive skin and uses the Phillips Dreamwear full mask. The material it is made of looks the same as this mask. Can anyone tell me if the materials are identical on the mask...ie the flexible cushiony part
I am not sure that I can say "identical" but it is very similar.
I’ve been using an Apap machine for a year. I purchased the f30i mask. The first night with it the air stopped flowing all together after 30 mins. I restarted the machine and the air stopped completely after 30 mins again. There are no leaks and it is professionally fitted. The clinician in person, checked all of my equipment and could not come up with a reason why it’s happening. Please help if possible . This mask is so much more comfortable then my full face mask. I use my Apap religiously every night.
I am sorry that you are having so much trouble. The only reason that the CPAP should be shutting off is during really high leaks. The machine will "think" that you have disconnected the mask and then turn itself off. If you are not having any leaks then there may be an issue with the CPAP.
I need some help, the velcro straps are trash. They keep loosing up while I sleep. What can I do to prevent this?
If the straps aren't working for you, then you may want to consider a different style Full Face. Links to options below.
cpapmyway.com/store/cpap-masks/full-face-masks
I have to use the Snugglehose cover for my 6ft hose to prevent rainout. I keep my bedroom at around 58 degrees, mostly due to menopause but I’ve slept better in a cool room with a fan blowing all my life. Will this be an issue with the tubing that runs from the connector down the sides of my face?
It should not be. The warmth of your face usually does enough to keep rain out from occurring in that area.
Have you tried a heated tube?@@CPAPmyway
Is this a new mode, as of this video being made? I ask as I’ve tried a very similar mask several years ago, but even the large wasn’t large enough as if it was against the bottom of my nose the bottom seal would sit right on my bottom lip so the moment my mouth opened at all it broke the seal
Ys the AirFit F30i was pretty new when we made this video. There is an Amara View and DreamWear full from Philips that are similar fits to this one, and they have been around much longer.
Liked mine till a tab broke that holds the frame to the cushion, it happened twice. To expensive to keep trying.
happened to me too. Nothing else wrong but mask is now useless. Very expensive to replace
Thank you!
You're welcome!
This is was very helpful.
Glad we could help. Have a great day.
Sorry if you have gotten asked this before. I have a very large head and was interested in one of the "i" seriies masks. Have you experienced anyone who has had too big of a head for even the large frame for these masks? Im worried it wont fit me.
you should order the F30i with a Large frame if that is the case. Large is pretty big. You sill see that selection on our website with the link below
cpapmyway.com/store/cpap-masks/full-face-masks/resmed-airift-f30i-full-face-mask
Odd that you only get the size guide AFTER you purchase the mask.
The sizing templates are downloadable from resmed.com for this mask. They are a pdf that can be printed.
The nose holes suck on this thing. If it gets misaligned it suffocates me and wakes me up lol moving to a nasal mask soon so i can use my asv machine
Thank you for the input!. Very helpful.
Happy with mine
Awesome Thanks for watching.
The sizing guide has sw but when you place the order the is no such size. The only sizes you can order are s m and w
We have it available in all sizes on our site. Link below for you.
cpapmyway.com/store/cpap-masks/full-face-masks/resmed-airift-f30i-full-face-mask
@@CPAPmyway thank u so very much. Really appreciate this.
Will this fit with an S9 machine?
Can you tell me if the ResMed Mirage FX is a full face or nasal mask? Not sure how to set my settings
Mirage FX is a nasal mask.
Has anyone else had or having air blow up into your eyes. Machine says that I don't have air leaks but I wake up with my eyes dried out?
I have had that happen to me a couple of times, and I just adjusted the mask until it stopped. One thing I have noticed since beginning treatment with this mask, is as long as you get a good fit and no leaks, it seems to be clearing up my dry eye condition. I have to do a new sleep study, since I haven't had one done since 2006 and so I have no idea what my pressures should be now. I quit using the old machine a few years back because the Mirage Full Face Quattro was killing my nose and forehead, and I could very rarely get it to stop leaking.
being a side sleeper does that cut off flow on side piece?
I am able to sleep on the side with this mask. The top connection helps.
Am a side sleeper with this mask, and when the bottom side is compressed, air moves on the top side to compensate.
En EEUU donde la puedo comprar en línea ? Y tamaños
I started to use this mask but it seems like the pressure gets so high when using it compared to the n30 I have to shot off machine and restart to lower the pressure any suggestions? I s always change settings on the machine for the mask as well.
That is interesting. If you have leaks sometimes the CPAP will increase pressure to account for those leaks. Do you think that the F30i has any substantial leaks on the seal while you are using it?
@@CPAPmyway I don’t think it’s the seal. The machine pressure gets up to 12 and it makes a lot of noise thru the vents I assume it’s also me opening my mouth. I adjusted the pressure down my avg has been 8 so I set it between 4-10 to see it was a little better last night but I prefer the n30 issue is I’m opening my mouth might try chin strap I’m going back and forth between masks unfortunately
Resmed always tries to come out with new*cough*copied*cough masks but always forget they also have the Airmini, which is my preferred CPAP machine. They don't make adapters for their new masks and I always have to end up waiting until they realize it. I love the Dreamwear Full Face mask and was hoping I could get to use it on my Airmini and this is the closest I can get. Hopefully I don't have to wait until Covid kills me as a frontliner until they release the adapters.
Yes I have to say I'm disappointed that the add ons can't be mixed and matched. In my opinion it's a money making exercise. I will only use ResMed
Thank You good information 👍
You are very welcome.
Can you use the same frame that connects to the hose from the N30 on the F30i?
The connections are different. The frame is the same for the N30i and P30i.
Thank you
You're welcome
Does the nose cradle stay in place for a restless sleeper
The F30i does a surprisingly good job at staying in place.
Would the magnetic attachment affect those who have pacemakers???
I know that has been a serious concern lately. If you can avoid a mask with magnets it might be best I would think. The Evora Full is similar without magnets.
cpapmyway.com/store/cpap-masks/full-face-masks/evora-full-face-cpap-mask
Thank you
You are welcome
Why would this COME a with a fitting guide after you’ve received and opened the thing????
There are sizing templates available that you can print to find out in advance. You can just google "fitting template" for whatever mask you are interested in. It will most likely come up.
@@CPAPmyway thanks…I did know that, but thought that it was strange to include one with your (hopefully correct) purchase
Yes it's comfortable but constantly blows annoyimg cold air on your hands and arms.
Thanks for the input.
Does it make marks or water type blisters Festoons Malar bags Edema bags on your cheekbones in the morning from the Pressure on your cheek bone from the plastic piece in your mouth
The F30i definitely should not do that. If it does you may have an allergy or the mask severely over-tightened.
I apply a small amount of vaseline. So far no problems
is it normal for the overhead tubing attachment to leak air?
Yes that is an exhalation port on the F30i and there should be air coming out of it.
Any idea how you can measure at home for the appropriate frame size before ordering?
There is a great Sizing template for that mask that can be printed out for sizing at home. Use the link below and scroll to the bottom of the page to doanload it.
www.resmed.com/us/en/healthcare-professional/support/masks/airfit-f30i.html
@@CPAPmyway Thanks for this. I am really looking for some way to measure the right head gear size for me. The template seems to be just for the mask, or am I missing something? Thanks again.
on this f30i how tight is too tight? i like it looser but i feel like even though the machine says great mask seal, that i will leak during the night, but too tight then it kind of hurts after a while....help?
If it is painful it is too tight. Also if you have marks on your face for hours after you take the mask off is a sign of overtightening.
@@CPAPmyway so how do I know the perfect tightness? When I go to bed it says perfect mask seal but I get leaks through the night
@@Zero_Tolerance You have to find the balance of comfort and proper seal. May have to find a different mask if it just doesn't line up for you.
Can you be a mouth breather and use this mask?
For sure.
The tubing attachment was too long for my face. The tubing pulled my hair. I hated it. I am trying one with that tube outlet on the front. See how we go. This is the 10th mask I have tried. So far not success.
Thank you for the input. Certainly not the right choice for everyone. Let us know if we can help in any way.
Is this good for side sleepers?
Yes. It gets the tubing above the head, and out of your way for moving side to side.
For someone suffering from sleep apnea , can the person use only the CPAP mask , or use CPAP machine plus the mask
The CPAP Mask will not work if it is not used in conjunction with the CPAP Machine.
You see my head, will it work for me? The numbers are 18/14 with all the facial hair. Where do I get the measuring card? I currently am using an F-20 AirTouch, Medium Bi-pap. Will the entire headgear fit into a SoClean2, this is the part I don't like about the AirTouch is the memory foam cannot be put into my cleaner or get wet!!
The mask should fit your head fine. I have a link below to the mask on our site as well as the measuring/fitting guide for you. It will go into the SoClean just fine.
www.resmed.com/us/dam/documents/products/Mask/airfit-f30i/fitting-guide/airfit-f30i_fitting-temp_web-inch_eng.pdf
cpapmyway.com/store/cpap-masks/full-face-masks/resmed-airift-f30i-full-face-mask
hI, Do I need to keep my mouth closed when wearing a full face mask? Thank you.
You should be able to breathe through your mouth when wearing a full face style.
Hi all, I’ve just converted to this from a full face mask, I have issues with leaks most nights, maybe because I thrash about in my sleep when I stop breathing! Any tips? Thanks in advance ✌️
We usually tell customers on this style full face to size down. So if you use a medium try a small. Especially if the leaks are around the sides of the nose.
How often does the frame need to be replaced?
Recommendation is every 3-6 months.
I was wondering about the air coming out the front and where the tube connected. Okay. I’ll sleep better tonight
Glad it helped.
Yeah very important not to be breathing your own CO2 in I guess Sweden understood that
Will it fit ResMed 10?
Yes it will
Also doesn't work with reamed airmini hose..
You are correct. We are holding on to hope that ResMed will release new connectors soon for all of their new masks to connect to the AirMini.
@@CPAPmyway ended up buying an hose adapter for the airmini. Reamed doesn't seem to care they created a proprietary hose that sucks.
I have one, used it 3 nights, rate it horrible. Could not make it seal at pressures over 10 no matter how tight I made it. Not recommended.
Thank you for the feedback on the F30i.
So what is the difference between this and the dreamweaver then?
The DreamWear and this F30i are very similar in fit and design. The difference has been more based on personal preference of Brand. There are some minor differences, but both work very effectively.
I feel like the mouth area of this mask isnt big enough :/ can't win
Sorry to hear that.
Has anyone else experienced this mask sticking to the skin around their mouth? The material in this area is smooth and it doesn’t allow for easy movement.
I have noticed that, especially with cleaning it daily the mouth cushion seems a bit sticky. I assume it is intentional to obtain a better seal.
Makes you look like a Snork! I love my f30. Not sure the i will work for me as I tend to sleep on my head
Not sure what a "snork" is, but I'll take it as a compliment. LOL! Thanks for the input.
The frame is way small and the sound level is completely off.
How small is the video 😂 i should have gone specsavers
Not a great mask for higher pressures. Also not an easy mask to utilize if you're using a eye mask to block out light. Only one strap to adjust for fit. For some - it might be a godsend. Try it.... Not so good for me.
I like your video, but please don't record in portrait, it is so confining, and I hate seeing the black areas on the side of the screen.
Those were the early days. We had a lot of videos that could use a reshoot for sure. Thanks for watching.
I hate this mask. Its the tubing on top that I dont like. I have a small head so the tubing on top moves. The F30 would work better for me.
Thanks for the Input on the F30i
Mine is super noisey..
More than likely if you are hearing a lot of noise then most likely the mask is not fitting quiet right. If you have adjusted it as much as possible, then it may not be the right mask for you. If you purchased it with us we have a 30 day exchange guarantee, and would be happy to exchange it for you. So that you can try something different.
Actually it is SUPER noisy. I measured mine at 65 decibels. Not cool. I am wondering if the frame is too small for my head? I MUST say that the mask is extremely comfortable and I have not had ANY leaks. Just the noise, it's far noisier than the F20 or F30 by a LONG SHOT.
So when you lay sideways you'll NOT only be laying on the mask air tube. Now you get the MAIN tube along the side of your face!!! you ll wake up looking like someone wacked you with a leather strap bruised in time sleeping on all that shit!!
Hopefully you would not be sleeping on the Main CPAP tubing. The Main CPAP Tube should stay above your head to allow movement from side to side.
@@CPAPmyway "CPAP Tube should stay above your head to allow movement from side to side." Yea like we move our head in a perfect axis NOT..This isn’t rocket science. Yea like the tube off the top wont get between your pillow and the headrest and get hung up. The friction of the long tube hanging over the bed and back up to the machine will greatly effect how the top of that at headband reacts since there are NO straps near that tube attachment to offset that friction. NOW you have the whole headband twisting sideways enough to break the sensitive seal at the nose and or. The nosepiece pressure changes and stress one side of the soft tip of your nose. Like I said this designs is shitty all the way around. People MOVE their heads NOT just side to side; they also move their head up and down. I use a ResMed Mirage Quattro Full Face CPAP Mask which you can tweak the pressure of the upper nose part of your face fantastic design yet my supplier says that mask is being discontinued. Also its going on a year me using the same face soft seal and hard mask and its still looks like new and I dont use one of those CPAP cleaners or a SO Clean The soft seal never lost its integrity as well as the check valve. Ill do my own vid to save Americans millions buying unnecessary softy seals and mask I also go weeks before washing out my humidifier tray. I do that vid and I don’t sell anything or a product,
I think these people need to go back to school to reeducate themselves on what "Full Face" means...
Sorry for the misunderstanding. In our world full face just refers to being able to breathe through mouth and nose instead of one or the other.
cheesy muffled sound
Thanks for the input.
What the HELL.. MORE hosing to clean out!!! I was told ResMEd was redesigning their full face mask and WHY. I have NO problem with the hose and roll over no problem, Res Med is SCREWING us with this piece of shit design!!! WTF NOW you lay your head sideways and have a BULKY air tube up against the side of your face!!! Not just a flat Velcro strap like the old design. HTF designs this CRAP!!!
It's actually very soft and goes flat more or less.
Poorly made video
For sure. Should probably redo this one.