This video was really helpful to source the parts and install. One quick note, I also had to swap the wiring harness but was able to make enough room behind the interior panel to reach the connectors and unplug them. Saved me a lot time, def worth trying before removing panels.
Good video shot. Very detailed DIY steps. Did u manage to figure out how to fix the quick blinks on your turn signal after installing the LED Bulbs? This is what I faced on all my Japanese cars when I upgraded the turn signal to LED bulbs.
Hi Atlas! Thanks for this video. I know it’s been awhile but I’m doing this upgrade. Can you tell me which relay parts you ordered to bypass the LED bulb hyper flashing?? Thanks so much!!
During half the video when you were removing the interior and side trimmings was that just for the tail light to get the bulb to work correctly? Or changing the harness ?
Mods And Coffee that is dumb. I have been searching for the issue with mine but it appears I’ve found it! Thanks for saving me another few days of searching!
@@AtlasWilder Thanks! Upon further review of the video details, I realized I overlooked it. I just bought my vehicle last night and the stock red lenses are an eyesore! I can't wait to acquire these!
I would order directly from a dealer. You will need the vin to a 2017 limited model. Find a model on CarGurus online then copy it’s Vin and give to your dealer. They will be able to get the correct lights for you!
Mods And Coffee The salesman said this rarely ever happens which I highly doubt. They were packaged well but for what they are they need to put more wrapping inside the box to take up the empty space around the lenses.
@@DubaiCalisthenics when you open the back hatch you will remove the internet plastic trim. It’s really easy I just used a plastic trim remover. There are I believe 2 nuts holding in the third brake light. That was the easiest part of the install. The body lights require more disassemble.
Oh... this is what I did before too. It turns out that the resisters became very hot and melted my cables and my inner boots fabric almost got burned out too. Watch out bro. Friend of mine got his car burned completely because his Wife forgot to turn off the hazard light at the roadside.
Yup I hear some peeps have issues, I mounted these ones on the sheet metal behind the number. The ones I have are black box looking ones, I’ll be sure never to run the hazards lol
This video was really helpful to source the parts and install. One quick note, I also had to swap the wiring harness but was able to make enough room behind the interior panel to reach the connectors and unplug them. Saved me a lot time, def worth trying before removing panels.
That’s awesome moving all the panels is more time consuming! I’m glad I could help!
Great video!
What was the final cost for this upgrade?
Good video shot. Very detailed DIY steps. Did u manage to figure out how to fix the quick blinks on your turn signal after installing the LED Bulbs? This is what I faced on all my Japanese cars when I upgraded the turn signal to LED bulbs.
Thank you! And yes I ordered some plug and play resistors on eBay and it fixed the hyper blink.
@@AtlasWilder Do you have the link for them plug and play resistors bro?
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F233024012139
Hello Atlas, I just got those lights, thanks to you ;-) How to change that light on the spoiler??? Please help!
rearlight with personality
Any idea what is the size of turning signal bulb on the car? Want change that one
Hi Atlas! Thanks for this video. I know it’s been awhile but I’m doing this upgrade. Can you tell me which relay parts you ordered to bypass the LED bulb hyper flashing?? Thanks so much!!
I’m sorry I don’t remember! Jump on the FX group on Facebook
Just got the tail lights but why did u move all of the interior to get to the plug? I’m tryna figure out am I installing mine incorrect?
Dude I don’t remember anymore lol I think the harness is different like the bulb socket wasn’t the same. Line them up and find out
Hi is the fuel pump module back there?
I’m not sure to be honest
@@AtlasWilder ok it’s fine, great video I now know how to access that panel which is what I wanted 👍🏾
Hi there.İ just bought a fx30d 2011 and i want white tail lights where can i found him.By the way i live in turkey any chance to ship there
where did you buy these lamps, because I'm looking on the internet and I'm not finding it
From the dealer. Just grab the vin from a 2017 Limited so they can find the parts
@@AtlasWilder thank you
During half the video when you were removing the interior and side trimmings was that just for the tail light to get the bulb to work correctly? Or changing the harness ?
To run the thicker harness for the bulb because bulb socket is different size and older harness wouldn’t fit.
Mods And Coffee I’m guessing I would have to do the same thing then if installed on my 2012 fx35?
Yup most likely
Is this just plug and play for 2012 fx35?
Possibly it may require the harness swap, they changed to the bigger harness bulbs later on I think.
Bro by any chance do you know how to fix the blue screen of death on backup camera
My screen on reverse just shows blue screen
Unfortunately I do not
Uuuuh black chrome it’s called. Think they should’ve done all the chrome that way
hi. where did you buy this lights??
Ordered from my local dealer
@@AtlasWilder send me link his website please
Los Angel google the vin to a used 2017 qx70 limited. Take the vin to your local dealer they can order lights with that.
Did it take you long to get the lights? Bought mine from the dealer and they have just been terrible!
No it was quick for me depends on your source I suppose. Hold out you’ll get them soon.
why dont the lights on the liftgate work?
Oem design, you can get aftermarket LEDs that do work, so lame right? If you wanna do that I have a guy who does it Dm me on IG
Mods And Coffee that is dumb. I have been searching for the issue with mine but it appears I’ve found it! Thanks for saving me another few days of searching!
What are the part numbers for those clear lenses? Ordering website?
Buy the tail lights here:
www.infinitipartsdeal.com
Part Numbers:
B6555-1A70A Combination Lamp Assy-REAR LH
B6590-1A70A Stop Lamp Ass-High Mounting
B6540-1A70A Backup Lamp Assy- RH
B6550-1A70A Combination Lamp Assy-Rear RH
B6545-1A70A Backup Lamp Assy-LH
@@AtlasWilder Thanks! Upon further review of the video details, I realized I overlooked it. I just bought my vehicle last night and the stock red lenses are an eyesore! I can't wait to acquire these!
I reached out to the site to get the parts for a 2015 qx70 base but their parts experts haven't responded on days.
just place the Order 😂 there’s tons of other sites use google, or place the order with your local dealer.
I placed the order and they arrived today! Thanks again for listing the part numbers and I look forward to checking out your other mod videos!
I been trying very hard to find this tail lights And I got nothing can please somebody help me find them my model is 2014 please
I would order directly from a dealer. You will need the vin to a 2017 limited model. Find a model on CarGurus online then copy it’s Vin and give to your dealer. They will be able to get the correct lights for you!
Too bad this won't work on a 06 fx45
Got my lights Friday and 1 came broken. Luckily dealer will replace it!!
Sean Sebrechts crazy! It’s funny I hear people run into this issue with shipping those from what I’ve read on the infintiscene forum.
Mods And Coffee The salesman said this rarely ever happens which I highly doubt. They were packaged well but for what they are they need to put more wrapping inside the box to take up the empty space around the lenses.
Hello Sean, I just got those lights, thanks to you ;-) How to change that light on the spoiler??? Please help!
@@DubaiCalisthenics when you open the back hatch you will remove the internet plastic trim. It’s really easy I just used a plastic trim remover. There are I believe 2 nuts holding in the third brake light. That was the easiest part of the install. The body lights require more disassemble.
@@AdventureBoundOutdoors thank you for your reply, it's very helpful ;-)
I need to figure out how to do this with a first gen FX 😂😂
Just rip her apart 😂
Mods And Coffee but I don’t want to break it😂😂😂
First gen was much easier, they were plug and play. Yes I did the mod for both my fx45 and my current fx50 😭.
@@johncs154 Do you still have your Fx50? Is it bulletproof trouble free??
@@kingofuseddurablecars.ls6040 it held up very well. I don’t have it anymore though..traded it for a Tacoma.
Oh... this is what I did before too. It turns out that the resisters became very hot and melted my cables and my inner boots fabric almost got burned out too. Watch out bro. Friend of mine got his car burned completely because his Wife forgot to turn off the hazard light at the roadside.
Yup I hear some peeps have issues, I mounted these ones on the sheet metal behind the number. The ones I have are black box looking ones, I’ll be sure never to run the hazards lol
Nothing available for ex35. Damn. SUbbed.