CLEANING HYPER TOUGH MOWER
ฝัง
- เผยแพร่เมื่อ 4 ธ.ค. 2022
- Links to products I have in my tool bag.
Air filter. amzn.to/2SGOmyU
Compression tester. amzn.to/2NMgeze
Spark PLUG TESTER. amzn.to/3jEcZH3
Inline Spark Checker. amzn.to/3bnXjmA
Feeler Gauge set. amzn.to/3rTsZK6
Chemical bottle. amzn.to/3eWcGVs
Above are affiliate links which means we receive a percentage of the revenue made from purchasing products via those links.
Before I fix this Hyper Tough mower, I need to clean it, otherwise I could get some of that dirt, into the carb, fuel tank, or inside the engine.
Dirty equipment drives me bananas. Whenever I'm done mowing with the Tractor or using my trimmer and blower I always clean equipment off before I put them away. My wife thinks I go overboard but ya gotta take care of your stuff
I totally agree! I will wax my equipment every so often.
@@smallengines1018 same here.. The way I look at is we work hard for our stuff, and the machines we use aren't cheap
thank you Gary Allen
Great video, thank you very much. It may sound funny, but I use a toilet brush to agitate dirt on large surfaces in the garden - took that from a bike cleaning video and works like charm.
thanks and nothing wrong with using what you have available
If I wash down a mower I always dry it off with the leaf blower.
nice
Air compressor
Looks good as new 👍🙏👍🙏
thank you RayFpv
$190 may be too much but $130 is too low. Oh wow at the blade...... Surprise! Amazing cleanup. Nice work.
Thanks Bob Newhart.
A nice cleaning, it deserved it, would of been easier with pressure cleaner but you can peal the paint off like with brushes on a power tool.
I did have a issue with the way you had the mower cleaning the deck for the general public to replicate they must know that may result with the oil can go to the exhaust or carburettor, this can be avoided by removing the oil first.
The correct method is to put the mower back to put the handles back to the floor and put a sand bag or bag of grass to keep the handles down.
Secondly to disconnect the spark plug, even though you removed blade.
you are correct
I hate to say it but I think that mud turned into adobe after being there so long!
you are correct
Have you considered getting some drill brushes. They make cleaning so much faster.
I have some but I don't always use them
Good job... You mentioned in another video that you were using a paint sprayer? for the cleaning instead of the large pressure washer. Fantastic! I was on line a few months ago looking for mini pressure washers. Can you speak more about that idea and what you used.
thank you Ed Rodrigues, this one uses a bucket to pull the water from. that means I can use hot water. ill show more about it later on
It's "Buy me red" so you have to make sure it looks good 🙂
you are correct
Most lawnmowers are in buy me red lol at least it's the most common color I see
@Eric Richardson Red is definitely popular now. We see a lot of colors. Husqvarna breaks the mold with orange, and they are the easiest sell but it's the brand name selling them. After that it's red, ,black and silver/gray. I can barely give the silver/gray ones away, even if they are perfect. 🙄
I honestly love the cleaning videos! please do keep making them 😁
You got it!
Well done on the clean! Looks so much better and easier to fix. Now for a couple of questions. (1) Did you fix the muffler guard as one of the lugs is clearly broken? (2) I noticed That your garden hose makes a whirling noise. Is it the nozzle or do you pump recycled water? Oh, I just saw the last post, you use a paint sprayer - any chance you can show us that?
1. no I just took the guard off for now. its made of aluminum so I can't weld it.
2. the noise you hear is the paint sprayer and yes I plan on showing it later on
Usually those foam filters have a filter oil on them to help them filter the air it's a tacky oil , wash and dry filter add a few dots of filter oil in different spots on filter and squish filter in your hand to spread the oil around it'll catch more dirt and filter the air better
you are correct.
Looks night and day.. good looking mower now
thank you Mick!
done.
I would of used the pressure washer on the lawn mower. I wouldn’t care what the neighbours think. They can’t understand why you’re using the washer, then they can just take a trip until you’re done. Usually neighbours don’t care what they do even if it bothers you. That’s my experience anyway.
yes you are correct
Its nice ofnyou to be considerate with your neighbours, most people don't give a crap about them, but would it be that bad to use a pressure washer for a few minutes instead of scrubbing everything with a toothbrush? Lol
you are correct, a few minutes of the pressure washer would have saved me a lot of time
We’re did you get the scraper you use to clean the mower decks
I picked up in a free pile of stuff no idea where the got it from
Hyper tuff 🥺😳🤬😡 great going Wal Mart 🤣
I usually first off take a blower and air compressor and knock off the crud on the outside along with a stiff brush maybe but no water. That way I can start tearing down and not have water worries and 99% of the time it'll just be for me and not going to sell. I'll get stuff mechanically sound and if someone else ends up with it, they can clean it up to their own specs. And if a foam filter is shot and I have to wait to get one I use OOOO steel wool with a little oil and it seems to work fine till I gat a foam insert. Raining here so no mower work yet. BLESSINGS!
nice tips thank you
Lewie McNeely
@@INSIDEHOUSEGARAGE That's just what happens here.
@@INSIDEHOUSEGARAGE U2!
I'm pretty sure the foam filter is supposed to have oil on it as well its a filter oil that is tacky sticks to your fingers and strings off when you pull your fingers apart at least the high end filters do and the combination filters with the pleated filter and the foam ring filter which gets oiled
Oh and it don't take much of that oil maybe 3 to 6 drops depending on how big the foam filter is
Harbor freight sells a pack of 3 brushes steel,brass and nylon I think you would have better cleaning if you got it and used the nylon one instead of a toothbrush and do you oil the filter like it says to do or not
thank you!
That was one of the dirtiest mowers I have seen on your channel.
I know right
why does your pressure washer sound like that?
its actually a paint sprayer
That mower blade doesn't look like the right one and one for THAT size mower needs to be chosen with HIGHER lift ends so the grass doesn't stick...
that's the original blade the I'll have to cut down and balance so I can use it for the test start. it will be replaced later on.
What has been the worst lawn mower you have cleaned or worked on???👍👍👍👍🖐🖐🖐🖐🖐🦌🌲⛄☃️😎😁😀👩💻👩💻👨👩👧👦👨👩👦👦👨👩👧👧👪🙋♂️📱✉📹📷🙄👧😎😁😀🖐👍👍
it was the popular with a cracked deck
Ok 👍 🧀🧀🧀👍👍👍👨🏿💻👨🏿💻😁😍😍👋😀😄😃😁
Ok 👍 👨🏿💻👨🏿💻👨🏿💻👍👍👍👍👍👍👋👋👋👋👋😍😍😍
Keep posting the video on TH-cam wen you going to post the next video???👍👍👍🤔🤔🤔👨🏿💻👨🏿💻👨🏿💻👨🏿💻👨🏿💻👨🏿💻😍😍😍👋👋👋😁😃😆😎😅😂😀😄🤓
soon