How I Set Up My RAYMARINE Axiom CHARTPLOTTER | Sailing Madness Ep33
ฝัง
- เผยแพร่เมื่อ 23 พ.ย. 2024
- #sailing #raymarine #axiom
Join this channel to get access to perks:
/ @sailingmadness
In this episode I explain how I set up my new Raymarine Axiom Chartplotter. I am still learning how to use all the features, so if I have missed anything please let me know in the comments below.
Join this channel to get access to perks:
/ @sailingmadness
If you would like to support future episodes please consider becoming a Patron by clicking the link below, thank you 🙏
/ sailingmadness
There are many benefits to becoming a Patreon. Patrons get early access to videos add free, and exclusive content as well as access to a "Patron Only" WhatsApp group and a live tracker.
To find out more about me please visit my website www.sailingmad...
I am also on Instagram - / sailing_madness_uk
And for media and collaboration inquiries: email: info@sailingmadness.co.uk
Excellent summary of features - lots I can apply right away to the Raymarine Axiom chartplotter that came with the boat I just bought. Keep up the great content.
Well done. Very helpful. Clean, clear, concise. Cheers from the Pacific Northwest!
Glad it helped. Thanks for watching 👍
Very Helpful. I am upgrading to Axiom Pro this week. You point out many things I will be trying out. Counter point on setting depth. I like to know the actual depth of the water as a means for position verification on the chart, assuming GPS can be inaccurate. Thanks for the nice video!
Yep, totally agree, it's also handy when anchoring too. Two reasons I should have pointed out in the video. 👍
Good Video Dave - I also have the Axiom 9 - nice bit of kit.
One thing i have added to my data on navigate is Course Made Good and Bearing to next Waypoint. It just gives that immediate cross check about where you're actually likely to end up relative to waypoint. If they match all good , if not - is that expected?
Obviously if you're sailing a course at right angles to the tide then you're not going to expect them to match if your course to steer calculations are vaguely accurate but it's a good way to ensure no surprises!!
100% echo the external card reader. Mine is cockpit mounted in a scanstrut pod at the helm so if i were to put one in it would be exposed to the weather so i suck it up but i'm strongly considering a second MFD at the chart table with the external. Just need to upgrade the batteries first though as if I read the manual correctly, that would make the below decks version the data master so it needs to be on all the time!
Thanks Jason. Yes the CMG and the Bearing is something I do need to set up. I’ve still been navigating on the iPad so far this year as it gives me an extra screen on the helm. My plan is to rely on the chartplotter for everything on the next trip so I’m sure I’ll be adding those to the screen.
Yes I know my system is set up with the screen at the chart table being the Master and the screen at the helm is the slave unit. One thing I didn’t mention in the video was that any changes made to the master screen is replicated on the slave screen.
Nice video Thnks for sharing. I just added a raymarine axiom 12 to my Beneteau 40.7. I will definitely rewatch this as I set it up. Thanks again
Thanks Dave, good video! I have had an Axiom on Seascape for 2 years and learnt a thing or two!
Hi very nice detailed explanation of the setup. I wonder if you have another identical chartplotter in the cockpit, can you synchronize them? And will you be able to use a single navionics subscription? Enjoying your videos, UK has amazing nature. Thank you, wishing you, happy enjoyable sailing always.
P.S. If you ever decide to sail south in the Med, Greece offers nice sailing adventures too.
Yes, you can link secondary screens and it will take chart data from one card to all units. BONUS: if you get a 2nd screen you can put a blank SD card in and use it to save videos, screenshots, put MP3 music on, etc. and all screens can access all SD cards.
Great job in explaining your Raymarine setup. Suggest you also add STW to your dashboard. This way you can compare SOG with STW and know what the tide is doing.
Thank you. Yes that is exactly what I have done. I have made a few changes to the set up since recording that episode. 👍
Excellent demo.
Great stuff Dave 👍👍
Watched it 3 times now, great explanation.
I’ve got an axiom9plus (still in the box) I bought a Scanstrut pod to fit it at the helm, big enough to add a couple of smaller instruments alongside.
Bad idea! The pod is too big, I don’t like how much it obstructs my view. Considering fitting the axiom at the nav station and using an iPad at the helm but worry about the sun and heat here in Crete.
Hi Dave, thanks for this video.
Just a stupid question, if I may...?
Have you possibly tried integrating Windy or Predictwind on your Raymarine unit?
...or is that asking too much?
Hi Nic, you can load the Predictwind app onto the Raymarine system, but unfortunately you cannot overlay any Predictwind data onto the chart plotter. 👍
Great video, lots of information! Thank you
Glad it was helpful 👍
Hi, Question, are both units connect sync by cable or axiom WiFi installed on the units ? Thanks Nick
Hi there. I have the Raymarine STNG network running through the boat so both displays are connected by wires. I do use their WiFi network to occasionally link the displays to an iPad but I find this drops out quite often.
@@sailingmadness thanks I take it that if they are both plugged into seatalk ng then they both display same but if you set a route on 1 of the mfd’s does it show same on the ther ?? Thanks
You can only have 1 route selected but you can show different displays on each screen.
More please, Great Video!
Hi Dave, thanks for your video.
I have same boat as you already couple years, so far just sailing around Adriatic sea.
I also preparing for upgrade my navigation system but I make decisions to buy cheaper version Raymarine ploter(element 7 s) and I will interface new ploter wit existing Raymarine ST60 devices, also I will fit new ploter on my binnackle, I woul like to have chart front of me when I entering unknown bay.
Can you please advise what size is your main sail sheet, I preparing to change main sail sheet but I think previous owner put ther little bit thicker sheet and my stopper not closing easily.😮
Thanks for the useful info. Do you use the axiom as an anchor alarm much? My nav instruments draw about 2A when all on which is quite a lot of draw on the battery for just an anchor alarm. I use an app on my phone instead.
Hi Jonny. Yes I do run the Axiom anchor alarm overnight and it does use a bit of juice from the battery. But, I do have a lithium battery system and solar, so I'm not too worried about how much it uses overnight as it soon gets recharged when the sun comes up. I too use an app on the iPad as a backup.
awesome video
Thanks Christopher. 👍
Will the anchor alarm sound on the iPad if connected? Or is it display only?
Yes the alarm does go off.
Always work with depth of water, not depth under keel! That way you can easily check your depth against chart depth and it CONFIRMS you are where your gps says you are. Do the depth under keel in your head!
If you like DOW then there's no reason not to have * *BOTH* * on screen at the same time. As you say DOW or chart position match, and DUK for at-a-glance real-world keel clearance.
All too high tech for a dinosaur like me, I'm still comfortable with the same equipment that Nelson's navigation officer had plus a radio transceiver. Still make do with a 20 year old Nokia.
See Tom Clunliffe for his B&G tech upgrades, he loves the stuff and he sailed with Jason & The Argonauts.
why can't they do multiple depth data points on chartplotters. like DepthWL, DepthKeel - you enter offsets of your transducer to both and you can have both. now on every boat you can have different settings - default (transducer), or waterline or bellow keel.. for speed you have both fields "speed over ground" and you have "speed over water" (if you have water speed sensor), why can't depth be this way is a mystery for me.
Another TH-cam boater showing on AIS!!??
I don't understand your point, why is that an issue??
TO MUCH TALKING GET TO THE INSTAL !!