My recessed medicine cabinet installation turned out great! I did it all by myself without involving my husband. He rushed into the bathroom, saying someone was cutting our wall. Then he saw the opening, and I said, "Yes, it is me; I am installing this recessed medicine cabinet". He said, "Next time, can you discuss these projects with me before starting? " Thanks for the great tutorial.
Would have been more helpful had you video captured the actual cutting of the pre-existing studs and if you had video captured the install of the new side support studs.
Yes, this is exactly what I was thinking. Including some video of the cutting and installing of supporting 2"x4" framework would have been very helpful.
It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better th-cam.com/users/postUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.
Thanks so much for taking the time to make this video. If I might suggest something that I and others would find helpful, would be showing a bit more of the detailed process of framing in the cabinet with 2x4s, how and where to attach the new vertical and horizontal studs. The video sort of glossed over that important step. But thanks again for making this video. There is some helpful info here!
I agree, I can place the cabinet in. That's the easy part. The hardest is cutting, and the unusual (for me) things like screws mentioned in another post. Plus, what to look for and do when you find something in the wall.
Very good video, Thank you. But showing a bit more of the detailed process of framing in the cabinet. I tried doing but the beam work I really messed up because I didn't see how it was done. What if you cut the beams but then just put in the cabinet? What could happen ???
Good day Sir! So many videos on TH-cam, obviously in as many subject areas as there are perhaps opinions. I have found many of them helpful, but also too many that fail in their presentation and instruction methodology. Some speak too loudly -- or softly, too quickly or slowly... utter indiscernible instructions... incorporate unnecessary background music -- or music too high … shoot camera angles that take away from understanding and comprehension, instead of adding too it... However, I really commend you and appreciate that you did such an excellent job in all aspects, and in explaining how to install a recessed cabinet! I was looking for something that addresses how to properly recess an A/V rack/cabinet in wall --- one that also covered potential issues and/or considerations in the process (like studs in wall). This was just what I needed...Your patience and way of plainly speaking was greatly appreciated and your video explained everything that I needed ---so Thank you!
Some walls are load-bearing (meaning they have roof/2nd floor weight on them) and some walls arent. The only way to know is to look at the structural blueprints. If this is a load bearing wall, its a bad idea to cut the studs because the cabinet cannot be relied on to hold up the weight. But if this wall isn't load-bearing, then it doesnt worry me.
@@MikeMcCarty6453 if the wall is load bearing, not at all. Unless you do shoring (adding temporary supports of the roof while you mess with the wall) but that should only be done by a professional
I'm not a pro but I believe a load bearing wall runs perpendicular to the trusses in the ceiling. In a typical rancher, that'll be the center wall that runs lengthwise.
Hmmm. The medicine cabinet is framed out, but you didn't really distribute the weight previously supported by the studs every 16". I would have installed a 4 by 4 header, just like you do when you frame out a door or a window.
Dang. The one part needed to see, you did off camera. I wanted to see how to cut the studs without disturbing the sheet rock on the other side. I guess that isn't possible because the sheet rock on the other side is screwed into those studs also. But I would have loved to see what took you used to to this with.
how do you get the cut studs out without destroying the drywall on the opposing wall, quick edit from utiility knife to rough opening, good utility knife work, but how did you get the scrtews/nails out without wrecking that other finished wall?
There is a metal rod packaged in the styrofoam. The rod slides into the u-shape channel of the support brackets (in this case you do not use the shelf). The bins then go onto the metal rod. Pretty cool added feature.
Jim I’ve got two of these to install and have elected to recess them, so your video was helpful. I have noticed a problem on each cabinet. The doors are not straight. So shimming up the insides will level out the doors, but...because I’m doing this by myself I’m planning to remove the doors from the cabinet. Have you done it this way? Has anyone? And is there a way to square up these doors after install? I do have one already mounted on the surface and the door is crooked, but the cabinet is perfectly square as it hangs.
@@getitdonehomerepair thank you for your response. I was a bit premature, more frustrated with the job, I wanted to recess the cabinets, but I have drain venting running up thru the wall, long story. But...the doors do have adjustments to square them up. I’m pleased, and its turning out “all is well”...again, thanks for you response
love your videos! I am from the united kingdom - where did you get your medicine cabinet? i would like to buy the same. Can you tell me where you purchase from?
@@omarmendieta9149 It's not just a matter of cutting the 2x4. The drywall on the outside wall is screwed to the studs. Maybe think a little more before you judge someone....
![[Re:all TREASURE] EP.6 in 방콕ㅣ🚩 쩡캠의 방콕 투어 빵 마이 와이 👍](http://i.ytimg.com/vi/uyFw-nItA_s/mqdefault.jpg)
This guy RULES!!! I love how patient he is with me, and doesn't talk down to me. I wish we had more teachers like this!
That is very nice of you to say Thank you
He's like that with all his projects. I've learned so much from him in diy journey.
My recessed medicine cabinet installation turned out great! I did it all by myself without involving my husband. He rushed into the bathroom, saying someone was cutting our wall. Then he saw the opening, and I said, "Yes, it is me; I am installing this recessed medicine cabinet". He said, "Next time, can you discuss these projects with me before starting? " Thanks for the great tutorial.
That is awesome!
Would have been more helpful had you video captured the actual cutting of the pre-existing studs and if you had video captured the install of the new side support studs.
Thank for watching.
Yes, this is exactly what I was thinking. Including some video of the cutting and installing of supporting 2"x4" framework would have been very helpful.
This video explain that in more detail: th-cam.com/video/cB3ErFJ6Hbo/w-d-xo.html
If you don’t know how to cut 2x4s just call a contractor please
Thanks sooo much for saving me from myself. And being so calm. And for speeding up parts. And for doing it for free.
You're so welcome!
It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better th-cam.com/users/postUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.
Thanks so much for taking the time to make this video. If I might suggest something that I and others would find helpful, would be showing a bit more of the detailed process of framing in the cabinet with 2x4s, how and where to attach the new vertical and horizontal studs. The video sort of glossed over that important step. But thanks again for making this video. There is some helpful info here!
Thanks for watching.
This video explains that part in more detail: th-cam.com/video/cB3ErFJ6Hbo/w-d-xo.html
You skipped cutting out the studs, that's the one part of the process I wanted to see.
Thanks for watching.
I agree, I can place the cabinet in. That's the easy part. The hardest is cutting, and the unusual (for me) things like screws mentioned in another post. Plus, what to look for and do when you find something in the wall.
Me too
Great instructional video, I bought two medicine cabinets just like the one you installed in your video
Glad I could help
Very good video, Thank you. But showing a bit more of the detailed process of framing in the cabinet. I tried doing but the beam work I really messed up because I didn't see how it was done. What if you cut the beams but then just put in the cabinet? What could happen ???
Great presentation. Best I've seen so far. Very informative and comprehensive without out idle or off topic chatter.
Glad you enjoyed it!
Cardboard....genius!!
Good day Sir! So many videos on TH-cam, obviously in as many subject areas as there are perhaps opinions. I have found many of them helpful, but also too many that fail in their presentation and instruction methodology. Some speak too loudly -- or softly, too quickly or slowly... utter indiscernible instructions... incorporate unnecessary background music -- or music too high … shoot camera angles that take away from understanding and comprehension, instead of adding too it... However, I really commend you and appreciate that you did such an excellent job in all aspects, and in explaining how to install a recessed cabinet! I was looking for something that addresses how to properly recess an A/V rack/cabinet in wall --- one that also covered potential issues and/or considerations in the process (like studs in wall). This was just what I needed...Your patience and way of plainly speaking was greatly appreciated and your video explained everything that I needed ---so Thank you!
Thank you for you kind words and for watching.
I pre-dill pilot holes whenever possible. Stops possible wood splitting and it takes seconds as I have a drill and impact driver.
Pre drilling only takes a few seconds but can save you a big headache
@@getitdonehomerepair really enjoyed your video and will be checking out the rest.
clean install
Satisfying seeing a job done right. Thanks man, great vid.
Glad you enjoyed it
Best video for instruction on this topic. Thanks!
Glad you enjoyed it!
Great video but I would have liked to have seen how he used the knife to cut the square out and how he cut the studs and added the wood pieces.
A comment on load-bearing v non-load-bearing studs might have been useful, plus what could be done in former case
Thank you for your input. That is why it is important to box out the opening.
@@getitdonehomerepair But the way you did it, the studs you cut can no longer bear any load.
There is no chance that a load bearing wall is behind a vanity. Also a load bearing wall would never be held with only one 2x4
@@abdulhai93 we use 2x4s for load bearing walls all the time as structural engineers. These 2x4s would be anywhere between 12 to 16 to 24" spacing
Great Job As Always Jim. You Are A Talented Man
Thank you very much!
Good job and this could of been a great video if shown the actual cutting of the studs.
Thanks for watching
Yes, I would like to have seen how a hand saw was used to complete the cutting of the studs.
I wish you would have shown the part where you were installing the 2x4’s.
Thank you! This gave me the confidence to try it myself!
Dream home coming... As always... Thanks Jim 😁
You bet!
If grown man strength was a person 💪🏾
I'm happy to help. Thanks for watching.
I'm gonna ask a dumb question... Don't you need the studs to keep the wall up? or does the actual cabinet become part of the wall stabilization??
Some walls are load-bearing (meaning they have roof/2nd floor weight on them) and some walls arent. The only way to know is to look at the structural blueprints. If this is a load bearing wall, its a bad idea to cut the studs because the cabinet cannot be relied on to hold up the weight. But if this wall isn't load-bearing, then it doesnt worry me.
As a structural engineer, cutting the studs like this bugs me. Hopefully this is not a load-bearing wall
How should you cut them? Or not at all?
@@MikeMcCarty6453 if the wall is load bearing, not at all. Unless you do shoring (adding temporary supports of the roof while you mess with the wall) but that should only be done by a professional
Great video, just curious if the studs that were removed has drywall screws in them and did they damage the Sheetrock on the opposite side.
Thy actually had nails in them and I did have to fix the other side of the wall.
How do you know if the studs are load bearing or non load bearing?
Thanks for watching.
I'm not a pro but I believe a load bearing wall runs perpendicular to the trusses in the ceiling. In a typical rancher, that'll be the center wall that runs lengthwise.
Just remove one, if the roof falls down it’s the load bearing wall, if not it’s not
Great Job and thanks for showing me how its done!
Glad it was helpful!
Thank you!
I'm happy to help.
it took me hours and hours to cut the wall studs with my drywall saw..... how did you cut yours so fast LOL!
Awesome. Exactly what I was looking for. Many thanks!
How do the shelf clips go in when there are 2x4s on the other side of the metal sides?
The clips just slide into the slot and down.
Hmmm. The medicine cabinet is framed out, but you didn't really distribute the weight previously supported by the studs every 16". I would have installed a 4 by 4 header, just like you do when you frame out a door or a window.
I’m trying to install this same cabinet on the wall…can’t do it in the wall because of plumbing. Help!
Dang. The one part needed to see, you did off camera. I wanted to see how to cut the studs without disturbing the sheet rock on the other side. I guess that isn't possible because the sheet rock on the other side is screwed into those studs also. But I would have loved to see what took you used to to this with.
Thanks for watching.
how do you get the cut studs out without destroying the drywall on the opposing wall, quick edit from utiility knife to rough opening, good utility knife work, but how did you get the scrtews/nails out without wrecking that other finished wall?
would it be easier to take the door off before mounting the cabinet?
Yes it would be but this door does not come off. Thanks for watching.
No vent pipe? I always seem to have a vent pipe going right up through the middle behind the sink in the wall.
Thanks for watching!
Hi. Would you happen to remember the make of that particular medicine cabinet? I've been looking for one like this but am not having much luck.
I was just wondering the same thing! I want one that looks like this
I just had this installed! Great video. I have the plastic bins and don't know what they attach to? Do you know how and where?
To be honest we did not us them.Thanks for watching.
There is a metal rod packaged in the styrofoam. The rod slides into the u-shape channel of the support brackets (in this case you do not use the shelf). The bins then go onto the metal rod. Pretty cool added feature.
Thank you for this video. What size screws and what kind of screws did you use?
There were long about 2.5-3 inches
@@getitdonehomerepair Thank you for your reply.
Great video. One minor detail that he didn't address. The screws from the sheetrock on the other side of 2x4s.
Good point. There was only one that needed to be repaired on the other side.
Thanks for the video. I wish you showed the hard parts - cutting the beams and installing the 2x4s for the cabinet...
I'm happy to help.Thanks for watching.
How did you cut the stud with out damaging the other side of the sheet rock
With the circular saw you can adjust the depth of the cut.Thanks for watching.
This has mirrors thats supposed to go on the side you skipped and the white covers that go on the screws
The side mirror are used only if you mount outside the wall.
Jim I’ve got two of these to install and have elected to recess them, so your video was helpful. I have noticed a problem on each cabinet. The doors are not straight. So shimming up the insides will level out the doors, but...because I’m doing this by myself I’m planning to remove the doors from the cabinet. Have you done it this way? Has anyone? And is there a way to square up these doors after install? I do have one already mounted on the surface and the door is crooked, but the cabinet is perfectly square as it hangs.
If I were doing the job and the door was not installed correctly I would return it for a new one.
@@getitdonehomerepair thank you for your response. I was a bit premature, more frustrated with the job, I wanted to recess the cabinets, but I have drain venting running up thru the wall, long story. But...the doors do have adjustments to square them up. I’m pleased, and its turning out “all is well”...again, thanks for you response
How did you get the 2x4s out of the sheet rock on the other side of the wall?
i.e. the drywall screws on the other side
With the circular saw and set the correct depth of the stud so you don't cut into the other side
Hey Pop, where did you get that cabinet from? I looked on Lowe's and couldn't find one with that nice frame
.
Pegasus has some good ones, on homedepot's site
love your videos! I am from the united kingdom - where did you get your medicine cabinet? i would like to buy the same. Can you tell me where you purchase from?
Yes of course! I got it in Home Depo
Was a blind person holding the camera?
Your welcome!
Not helpful, SHOW ME THE FRAMING ON VIDEO
2¿to
Thanks for watching.
You didn't show how you cut the studs! No help at all.
If you don’t know how to cut wood maybe you should just hire a professional 😂😂😂
Your right . The footage was not very good so I decided just to explain how I did it. Thanks for watching.
@@omarmendieta9149 It's not just a matter of cutting the 2x4. The drywall on the outside wall is screwed to the studs. Maybe think a little more before you judge someone....