How To Cut A Carbon Road Bike Fork Steerer Tube

How To Cut A Carbon Road Bike Fork Steerer Tube If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com...
Buy me a coffee
www.buymeacoff...
Show your support via the Patreon page
/ freetocycle
Follow me on Instagram
www.instagram....
[e-mail]
Thanks for watching.

[@nektin9923]

The best cycling related channel for me ♥ love from Philippines 🇵🇭

[@andrewlabat9963]

What did on my LOOK, and another bike was, I simply used the spacers I wanted removed from the stack, and marked it. I used that method three times and it comes out spot on..

[@calenichols7975]

Could I leave the expansion plug sticking out 1mm on the top instead of flush? So the top 5mm spacer under the top cap has something to ‘sit’ on?
Thanks for everything!

[@testdirver]

so that carbon fork dont use the metal ring at the bottom to seat the bearing? (he used to answer)

[@knightsljx]

most compression plugs' support don't seem to go all the way up to the top, it may prove more beneficial to measure in a way that ensures the stem is positioned fully on the expanding portion of the plug, even if that means having a spacer above the stem?

[@c.initiative2705]

thanks! got to cut now.

[@ldvcbi4317]

Hello :)
We can use a quality blade for steel to cut the carbon fork?
Best regards.

[@FreeToCycle]

Yes!

[@traderz13]

If i have the same bung and stem as you have, can i cut my steerer 3mm shorter so that the topcap sits flush to the top of stem without the need for extra spacer on top?
If not why? I dont get it?

[@rajaamirularif6698]

Can i just use normal blade saw ?

[@vd0o666]

What is the maximum amount of spacers I can run underneath the stem?

[@FreeToCycle]

If it’s a carbon steerer tube then no more than 40mm of spacers under the stem.

[@samuraioodon]

@@FreeToCycle does this include the dust cap if dust cap 25mm?