How to Transfer Artwork to Your Wood for Relief Carving | Wood Carving for Beginners
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2021
- Transferring artwork from a paper to a wood block for relief carving using two methods.
Method 1 uses a stylus to etch the design into your wood. This is a great option if you don't have carbon paper.
If you don't have a stylus, and you'd like to use carbon paper instead, go to Method 2
Timestamp: [4:21]
Supplies Needed
Timestamp: [0:23]
- Pencil
- Metal Stylus with Metal Ball-Point at the Tip
- Artwork for Transfer
- Block of Wood You'll Be Using for Carving
Optional:
- Carbon Paper
- Tape
Method 1
Step 1
Timestamp: [0:45]
- Place your pattern or artwork over your block
- You can hold it in place or tape it in place if you have tape handy
Step 2
Timestamp: [1:08]
- Go over the carving pattern with your metal stylus
- This will etch the design into your wood block
- Make sure you've made an indentation for every line
Step 3
Timestamp: [3:07]
- Take your pencil and trace the groove in the wood
- This will give you enough detail to start carving
- Begin carving!
Method 2
Timestamp: [4:21]
- Tape your artwork on one side to the wood block as shown
- Slide your carbon paper underneath, so it's sandwiched between the artwork and the wood block
- Trace over the artwork with the metal stylus or the pencil
Thank you for this video.
Thank you great tip and video 👍
Can I transfer a A6 stencil onto a 2.5 x 2.5 peace of wood
Brother what kind of wood you use for carving
basswood