ฝัง
- เผยแพร่เมื่อ 23 พ.ค. 2023
- Hi guys 🙂
With the Klipper fans growing and the shortage of Raspberry Pi boards, users are trying to find different solutions.
Meanwhile, some 3D printing manufacturers are making alternative solutions for the Raspberry Pi boards.
So, in this video, we will check one of Bigtreetech's solution, the BTT Pi version 1.2.
Here you can find out all about this new board and how to start using Klipper with it.
♦ You can find the BIGTREETECH BTT Pi V1.2 here (Not Affiliate Link):
biqu.equipment/products/bigtr...
🔶🔶🔶 If you like our work and want to help the channel, you can contribute using one of the following...
🔶 PATREON:
/ ruiraptor
🔶 PAYPAL:
Use our email to send your donation ( ruiraptor.channel@gmail.com )
🔶 You can also help by using our Banggood affiliate links posted below (costs you nothing and you are contributing to the channel):
You don't have to buy the item from the link. If you click on them and then buy whatever you are looking for works!
♦ Ender 3 V2
pt.banggood.com/custlink/DmDK...
♦ Creality Ender 3
pt.banggood.com/custlink/mmmG...
♦ Creality Ender 3 Pro
pt.banggood.com/custlink/m3D3...
♦ Creality Ender 5
pt.banggood.com/custlink/D3GE...
♦ Creality Ender 5 Pro
pt.banggood.com/custlink/mGGy...
♦ Creality Ender 5 Plus
pt.banggood.com/custlink/G3DE...
♦ Creality Ender 3 Max
pt.banggood.com/custlink/mvKy...
♦ SKR Mini V2.0:
pt.banggood.com/custlink/vKGY...
♦ Artillery Hornet
pt.banggood.com/custlink/mmDd...
♦ Artillery Sidewinder X1
pt.banggood.com/custlink/333d...
♦ Artillery Genius
pt.banggood.com/custlink/D3vy...
♦ Creality CR6
pt.banggood.com/custlink/DGmd...
Thank you so much for your support 😉
🔶FOLLOW US ON SOCIAL MEDIA:
♦ / ruiraptor
♦ / ruiraptor
♦ / ruiraptor
Music by TH-cam Library:
Palace of Roses - Aakash Gandhi
#Klipper #RaspberryPi #Bigtreetech - วิทยาศาสตร์และเทคโนโลยี
Awesome video, thank you for this.
I'm in the final part of configuring my V2.4r2. And this board came with my formbot kit. Needless to say I would've been a little lost otherwise.
Just what II needed, thanks!
I love my BTT Pi, it works really good.
I have a cb1 and works really well. I ordered and now have one of these, too. It is much more practical than the cb1, unless you have a manta board...
It does not need any/much cooling. It stays between 45-60 celsius. (open air, not inside in a case/printer)
Thank you Rui ! 👍
Thanks for this, actually helped me decide between an orange pi or btt pi, i chose the btt pi. do you have setup instructions for the adxl345 on the btt pi? i can't get mine to work.
THANK YOU!!!!! i installed it directly in my voron without realizing that it has a micro sd UNDER it (which is not shown in it's manual) I i kept trying to flash it with the usb port.
Good guide!
Спасибо!
excelente video una pregunta como configuro para el adlx?
The long wire isn't the antenna right? It's the sticky pad? Do I need to worry about where it's mounted? e.g. far from the steppers, and not near the board? on or off the printer's metal frame?
buen video tengo una duda , hay veces que conecto a la corriente y no se conecta en la pc , tengo que intentar varias veces , sabes a que se deba? gracias
can you install rasbian and OS on this like a normal pi?
What is the screen that the BTT Pi is connected to via HDMI? I was having trouble getting my SKR board to connect to the BTT TFt, so I wanted to use an HDMI screen.
Why do we have to remove the red bridge or Jumper??? Prevent power from getting from screw connector to USB C???
boa noite
estou com dificuldade em configura o input shaper com o pi v1.2 e btt adxl v1.0 nao detecta o adxl
obrigado
Se puede usar el connector usb c para conectar-lo a la placa de la impresora
What does this Pi actually do? It seems to me that all it does is install Klipper firmware to your printers main board? Isn’t there other ways to install the firmware. If it replaces a Raspberry Pi then does it run Octoprint because that’s all I ever used my Pi for as my Ender installs firmware directly from MicroSD? Is it an alternative to Octoprint?
Great product but the mounting holes are not the same. Just take a look at it. One is square the other one is not, you can visually see the difference between when it shows the top view of each board - just a heads up in case you were planning on using an existing raspberry pi case to use this board.
What if ı forget to remove jumper before ı power it with 24V ?
Does it work with Home Assistant?
como se hace la conexion del ventilador
Hey rui the board is on sale really cheap with the biqu b1 and talks about a cloud service but cant we just put klipper on biqu b1 and make it faster?
I wonder if something isnt being said in the ad
Hi, if it has the same board, in principle you can install Klipper on it and run it normally.
I'm purchasing a voron 2.4 ldo kit and it wont come with a pi my question is can i use this as a direct replacement ill also be using a ERCF filament changer. or should i just bite the bullet and get a raspberry pi
Yes, this will do the trick for the LDO kit. Note that you can't run a DSI display from it though so you need to stick to the mini12864 or use an HDMI display.
This is what ships in the Formbot V0.2 kit.
Hello!
does retropie or recalbox or similar linux-based operating systems work on it?
I don't think it would be viable. Less ram than what's usually on a raspberry pi. Don't see why you couldn't install a Linux desktop distro and go from there
Not to mention the slower cpu
Just got one of these myself and got it working. Can you attach more than 1 printer to these? I assume you could but I haven’t worked out how to do yet.
Up to 3
@@looxonline thanks, can you point me to how to do this please?
@@ZeN0_Warzone th-cam.com/video/8vkzpvia4mg/w-d-xo.html
Can I set this up without a screen?
At 8:43 how do I find the klipper.bin file so I can install it onto my printer?
8:32
Hi, do you have rpi pin-out for SPI ADXL345? I can't get it work, thanks in advance
I also need it, a few weeks ago I bought a btt pi and successfully installed klipper, but when I tried installing the mellow version of adxl345, it couldn't work on the spi connector, and also got the error: invalid ff x e5 , etc
One of the four mounting holes does not line up with the hole for the pi. This makes any mounting bracket or case designed for an actual rpi, unusable for the BTT pi.
Is it possible to just mount it with the 3 holes that do line up?
Only 3 mounting hole locations are the same.
I still can't get a picture or the see the wifi AP
O sonic pad da creality custa 160€ mas funciona com multiplas impressoras traz ecrã e tudo, mas secalhar é melhor esperar mais uns meses as versôes anteriores da caixinha da creality não funcionavam em quase impressora nenhuma.
Existe também outra opção...o bigtreetech pad7
@@ruiraptor ineressante,as criticas são de facto muito boas e como usa um modulo possivelmente poderá ser atualizado com um modulo baseado no rk3588.
@@ruiraptor Direito na BIQU🎉
The problem with these boards is support. Pi has the community
Totally agree. But if somebody has a current project and can't wait for a real Pi to be available it's good to have this option.
If your goal is to use klipper then there is ample support for this board. If your goal is to use it for a generic purpose then it is running armbian and the armbian forums are very active with heaps of support.
👍
8:10 @ruiraptor Como é que eu sei os settings da minha impressora? Que settings são esses?
Olá, esses settings são relativos á board da impressora. Que board é?
@@ruiraptor É uma creality v4.2.7, aquela "antiga" com steppers silenciosos
@@ruiraptorEntretanto já consegui resolver o problema. Estava a descarregar o ficheiro config da placa, mas tive que alterar o nome dele para "printer.cfg" para o mainsale o conseguir ler! Acho que agora já devo conseguir acabar a instalação XD
Veja no topo do ficheiro .cfg as instruções para esses settings:
github.com/Klipper3d/klipper/blob/master/config/generic-creality-v4.2.7.cfg
@@ruiraptor Obrigado, se eu tivesse visto este ficheiro já me tinha poupado muitas horas - -'
No entanto, não consigo encontrar o ficheiro "out/klipper.bin". Mesmo no video, não encontro esse diretorio de "home/pi/klipper/out", mesmo pesquisando com a pesquisa Windows :/
In my opinion, it is unnecessary to install putty as you can simply use window's built in CMD / Terminal using the command:
ssh (username)@(ip)
e.g. ssh pi@192.168.x.x
this will boot u straight to the password input screen. I recommend using terminal and this allows u to avoid installing 1 additional software that arguably isn't as nice to use.