LED Fishing Light DIY
ฝัง
- เผยแพร่เมื่อ 2 ก.ย. 2018
- LED Fishing Light DIY ,,,,,,,, This DIY shows the most affordable way to make a fishing light , which meets my goal of making fishing more affordable , i hope it help and if you have any question leave em in the comment section please ill be more than happy to try and help you
LED light strips
XKTTSUEERCRR Waterproof Green LED 3528 SMD 300LED 5M Light Flexible Strip 12V 2A 24W 60LED/M www.amazon.com/dp/B00EKEF6OM/...
For Fishin N Stuff gear please visit link.below
if your looking for something not listed , leave a message
www.etsy.com/shop/PebsPrettyf... - แนวปฏิบัติและการใช้ชีวิต
![[안방1열 직캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FanCam) @SBS Inkigayo 2404707](http://i.ytimg.com/vi/Tn3bGHiBWkg/mqdefault.jpg)
I absolutely loved this video! I scuba dive and am about to begin my journey into underwater photography and with minimal light underwater this is a very frugal way to increase the lighting.
That would work good . Check out this video , it's the improved version
th-cam.com/video/6sdRwB7nAJQ/w-d-xo.html
I’m a 67 yr old widow. With no husband, no dad anymore and 2 sons living across the country I have to diy. I got a bigfish 103 with pro fish peddle drive to fish the lake. You have no idea how much your videos (and sense of humor) have helped me. From the bottom of my heart….thank you!!
That's so awesome . I really do appreciate that . I appreciate you watching and I mean that from the bottom of my heart . You made my day
Finally got my strip lights delivered and made my light. Can't wait to try it on Lake Norman in July when we're there for vacation. Thanks for all your DIY's.
Another grand slam video!!! You always produce the best DIY fishin TH-cam's in all of TH-cam land. I am a dedicated fan who has improved my boats, garage storage, tackle and fishing accessories by incorporating many of your ideas. Keep up the phenomenal work brother!
Awesome, thanks Kevin - I was having issues figuring out what wire to use, I appreciate your simplicity.
Thanks for the cool videos! Just built my light, it ran about an hour on a 20 volt DeWalt battery with a 12 volt controller. Threw it in the bayou and seen A ton of bait fish circling around. ET from Danbury Texas.
I made two lights myself. They work great. Thanks for the DYI!
Yes Sir thank you for watching em brother , ok and they do work great lol
Happy New Year!!! Made 7 of these lights and gave them as Christmas gifts. They were a BIG hit. Thank you for all of your ideas. Keep em coming.
Dang it man . Me and you need to be friends haha that's an awesome thing ti do brother
Tell em to go watch the how to use a green light video lol
Brilliant design! And brilliant light! Thanks much.
Thank , im working on a new one now , this is an older video
Thanks for your video. Based off this and another I made a pair of these lights with some changes to be used to set out and stand themselves up vertically using 1.5" pvc, with the cord coming in from the side of the bottom end, lead weights in the bottom, filled with insulating foam, all sealed up but just in case of any future leaks. I also covered the outside, esp over the LEDs and holes for wiring, with a clear plastic shrink wrap for a little extra protection from leaking or damage to the LED strip while also holding it in place even more than added adhesive. Mine are designed to set out and fish from a dock or shore rather hang down, with enough weight in the end that they will sink but stand up.
Man! I just found you and you’re videos are great. Thanks
Another great video explaining everything in detail. A big shoutout to you and your TH-cam channel👍
Thank you brother . Im glad you like it , the feed back is really helpful too ,thank you for taking the time and leaving a comment . Cause sometimes im not sure if I talk to much lol
This is great as always. Thanks for the DIY!
Hey thank you Sir for watching and commenting
Yes! This is exactly what I need! Thank you sir, great video and very informative sir!
Thank you Sir I aim too please hehe , that's a way better light for fishing than that rechargeable one you can just hook it to your boat battery
Man I’m got to make one of these thank you for a great diy video and thank you for sending me the link two thumbs up excellent job
Click on my little round logo beside this comment and itll take you too my channel, I've got a lot of DIYs . You might find something else you like , I appreciate you taking the time to comment brother
Thanks for the video, I just got done making mine but I ordered 50ft white lights ,wanted green but couldn't find any that long so I used green finger nail polish not pretty but works just as good, fish dont care about pretty thanks again for your videos
Thank you for watching brother , let me know how it works . I use white and green lights and I don't notice a huge difference in the 2
I know this is an oldie, but goody TH-cam, but it was exactly what I needed to see. I've watch other submersible fishin light vids, but yours was the most instructive and didn't waste a ton of time getting to the end product. Many of the others vids crammed 5 mins of useful info into a 20 minute video...AAAAARRRRGGG!
Gonna make one to take out in San Diego Bay at night (while hoop netting for spiney lobsters) to help replenish my bait supply of fresh mackerel...while the hoop nets "soak".
If U R ever in San Diego, would love to hook up to share some great fresh and saltwater fishin adventures.
Thx for a terrific TH-cam channel!
I really appreciate that , im working on a new light video , a little dissect idea
Hey big guy I just wanted you to know I really enjoy your videos. I learn something new every time! Thanks
You are the Best, thank, qualification A+.
That is a really cool DIY project. And thanks for the tips in it's construction.
The Texas Road Runner yes Sir thank you for watching bro
Thanks for your video as I had a little different idea. Pool noddle glued up like a picture frame with Plexiglas glass glued on the bottom of the noddle frame. Had also considered installing led lights on the bottom of the noddle frame. But because of your video I believe I will try your version first. With your light stick I'll be able to tell how deep to fish.
Your idea will work though . One of the best lights I fish is mounted 2 foot above the water on a dock . It's a very Brite halogen light
Awesome DIY thanks for the video
KYnightstalker thanks for watching my friend
I can't quit watching your videos. I am a big diyer and love your ideas. Hello from the the foothills of NC.
I appreciate you watching , thank you very much
Great video. Simple and to the point. Thanks!!!
Thank you brother , I appreciate the encouragement , that's the best way to do DIYs . I have a bunch of em but if there's anything you'd like to see let me know and I'll try it
So cool man! You make GREAT videos! I LOVE it!
Man you know how to give a guy da big head lolol I'm jk. I appreciate brother I like helping ppl and I really enjoy utube , thank you so much for watching Sir
Very cool. Should definitley make a video of one using led controller to change the colors or patterns of the lights. Crappies love that disco light stuff!! ; ) . Thanks for the video!!
Lol thank you for watching , those ol dancing crappie are the best ti eat lol . I typically just use a white light a lot of the time but most ppl use green so I made a green one
Very nice, thanks for sharing
Thanks for your support brother lol
Props on this awesome idea!
Reel Deal Fishing thanks bro hopefully it helps someone , I appreciate you watching my friend
Awesome tutorial brother! That's a good looking light thats neatly done. 👍
Thank you Sir I appreciate that it should be neat I've made like 4of em lol , brother I appreciate you stopping by my friend
That's pretty kool brother 😎. I'm gonna have to try this one out too. I already made the slinky weights out of bb's i had laying around. Worked out pretty good.
Felix Martell dio you fish at night much , it's great in the sometime , I appreciate you watching brother
I do for cats. Been trying to learn how to catch crappie. Any pointers on how to catch'em?
Cool video!
muddyrivercatfishing thanks bro
Man. Im gonna make that! Great video brother. Keep it coming!!!
Thanks man they really work good not just for crappie but they would well for bass too I appreciate you watching brother I get off work 2:30 my time give me a call one day and we'll talk
Good DIY
That Murder Inc. Thanks man
I will try this thanks bro looking forward to the next video
Hillbillycatfishing Jimmydixon thanks for watching man
Awesome stuff brother. Get it done Ta-day.
Thank you Sir I appreciate it brother
Your the Boss of DIY !
Robert Agri Chillin' Outdoors I wouldn't say that but I do like to make stuff , and help other ppl
👍🏼up #20.... Cheap is always good, cheap and easy to make is better and cheap, easy to make and work great is best.... so that should be called the best submersible fishn light right there....
SK's CRAPPIE Catchn Adventures thank you brother I appreciate you my friend , when you are the crappie king you don't have to sneak up on em at night like I do hehe
Fishin N Stuff 😃🤣😂😁😅😄.....
No that's funny right there....
You be wacking'um too and stay cool while doing it.....
Gonna have to try this.
very nice
Cool idea man.
Thank you Sir I appreciate it, I'm not sure if you use lights being a bass man ( I fish for everything lol ) but they work great for crappie I've even caught a lot of bass with em
Nice one mate good work thanks from North Africa
Thank you Mate
Looks phenomenal brother keep it up
Thank you Sir, I appreciate you commenting and letting me know you like it , it's inspiring and let's me know im on the right track . Thanks for watching brother
Wow that's an awesome DIY, legit brother
Josh Green Adventures thank you Josh I appreciate that , means a lot coming from you brother
nice, got my stuff ordered. only thing I will add is a small stainless eyebolt in top cap to use as a main line string for safety and to keep weight off my power supply wire. I also got the 12/24 V lights so I can use the 24V off my trolling motor batteries. thanks for the video
That should work good , do you have one 24v battery or 2 12v batteries. If you have 2 batteries you can just hook your light to one of em th that's what I do .
Could you put a cigarette adapter on the end or USB if your boat has the plugs!
I don't see why not , that would work or you could change out the cigarette type and put a USB type cause a lot of the LED light come with USB plus nowadays
Thanks, love the channel! Look forward to watching your diy's.
@@maherphine I really appreciate you watching , thank you Sir
If your DIY videos were any better, I'd feel guilty not paying for them! Great stuff!
Haha thank you brother, that's an awesome comment right there lol
thanks for the video. well done
ReBro thank you for watching it I appreciate it , and thanks for commenting I like to know what ppl think good or bad
Thanks sir for this video...
thanks for the video on this subject dude ✌
Yes Sir hope it helped ya out
Ever use that light (without poly tube) in saltwater?
Your videos have come a long way by now, but this one was still pretty awesome! I need one of these lights right about now. Take care Bud.
Thank you very much . They have come a long way lol . I cringe watching the ones from 5 or 6 years ago lol
Awesome! I know what I am making next! Thx
You won't be dirty you did brother here is a video of me using that very light
th-cam.com/video/sP-ZbVfhZmU/w-d-xo.html
You ARE the man 👍
Thank you Sir , man I appreciate you brother . Your awesome
Great Video. The LED strip light you used from amazon is rated as IP65 for its waterproof rating meaning basically its rain proof and not for submersion. The submersible standard is IP68 which has two coverings to make sure the LED are waterproof and are designed for submersion. How has your light lasted? Have you used it many times? Thanks for the straight forward video
Nice!
Triple 7 outdoors thanks for watching buddy
Nice how to.
Weekend warrior outdoors thanks I appreciate that and you watching
That's awesome! Now I have to make one.
Justin's Fishin Fetish hey I have an awesome kayak fishing light idea I'm going to do soon that will fit you like a glove lol , thanks for watching brother
sweet cant wait to see it. I just built a removable rod rack and headlights/filming light for the boat. And some catfishing bank rod holders
Sweet did you do a video about em
Yeah just to show them didn't video the welding. Just have to edit it..
Well I want to check that out , the bells clicked so I'll keep my eyes peeled bro
Awesome! Subbed!
Thank you Sir , i working on another light idea this video is over a year old and I got another idea on the subject I want to do
@@FishinNStuff you know, I was just thinking about that. Maybe the white 360 saftey light from the kayak with green film and making like bright depth charges. 4-6 lights surrounding the boat.
Yes I need that. Want one like that for in the water but also need white light for hanging off the bridge for some night. I mean I love my big light that supost to be on top of truck suv or car lol but I use 8 or 9hrs and it about kills my battery. O and it's a marine battery it's for my boat I take when I fish and charge when I get home which I need to charge one for tomoorw. But I'll weight till dark it's cooler then. It great video I haven't followed you long but I wish it's been years you got some amazing diy love watching cause I can't do many things I used to anymore so it's cool to watch new things. Have a great week sir. God bless
Thank you Danny I appreciate your comments brother . And your right the underwater LED fishing light would make a great light for seeing with too . It's basically the same thing as the NAV light I made with a switch . And they don't use a lot of power I run both of these on kayak batteries the small ones
@@FishinNStuff ok I'm gonna look one up there so bright be great to make 2 on poles to put around my trailer I sit and lay on while fishing. Or out side my truck while fishing glad I seen this. Thanks bro. God bless
@@FishinNStuff and sorry I write so much. Lol
Great light man i made some 2 years ago but with no end caps and they work well also there very light weight and like a timex take a licken and keep on a ticken
I don't reckon you need end caps now that I think about it lol . That's what I need to do , ( how cheap can wer make a light lol ) that's not a bad idea lol . I appreciate you commenting brother I really do .
@@FishinNStuff just make sure to use shrink tubing on your connectors
Yes Sir I always do , love that stuff lol
🔥🔥🔥👊
Good job and instructions. Just wondering do you have a video on how you made 1st light? It looked like it had been wired with a 3 prong 110v or can you make a video like that for all us pier fishers that have access to electric while shrimping and fishing it would be great to see something with a fail-safe like a trip in case some water got into it.
Actually the First light was 12v as well but that is a good idea I've never thought about making one that runs off of 110v . I might have to do that
Well I got mine done! And WOW! I can't wait to put this bad boy in the water. I had to use 1.5" because Home Depot didn't have an end cap for the 1.25", but this bad boy is tough. I used 25' , 18 gauge wire from Home Depot. IT IS AWESOME!
That's awesome man served me a picture I want to see it
Keiff32@hotmail.com
Could use clear heat shrink for added protection. After time some of the cheap brands of lights the clear protection film will flake off
That's a great idea buddy
Need to put a couple of these on the ol' jon boat! 😎👊
They work great , I appreciate you watching Sir more than you know
Very clean light. Way better than the Chinese junk on ebay.
Yep I agree , it worked good ended up a lil heavy filling the whole tube with silicone lol
Interesting
Thank you for watching I appreciate brother
Im impressed ! Didn't use crimp connectors and black tape!
Those work but I don't want to make something that's getting sealed up like that then have a wire come loose you know
@@FishinNStuff that was actually the correct way to do it regardless lol. Catch a slab!
Fishin N Stuff, have you had any shorts or issues with this method yet? I did my first light this way and it ended up shorting out about 8 leds from the top. It stayed fully on for about an hour but then started flickering and all but those 8 went out. I just fished for about 2 hours more like that then it flashed orange and red and slowly dimmed into dark. when I pulled the strip off later it had started melting at one of the junction points on the back side of it where the sticky side is. I really don't know if it was just a bad connection there or the water caused it. I have more lights to try another one but haven't decided if I will use this way or the old way with the cover over it.
i wonder if a 5 meter led strip will be ok to connect to a usb cable to power adapter. or should i buy a 12 volt power adapter and connect the wires. 5 m led strip = 3 amps?. not sure how to do this
Love ur videos . Can u build a catfish noodle w a light sticking out of the top????? Thanks u for the video hope u keep doing them
I can , you can also use glow sticks on em and hi can use jugs with glow sticks in em . But it makes it easier for other ppl to find and steal I find
I just saw the totorial how's the light after one year also did you put anything over the lights
Nice Light Saber, but you forgot the handle :D
Nice build
Hahaha that's funny , thank you Sir appreciate you commenting brother
Yea man another great video that light is sick bro im making 1 or 2 or 3 i have a big reel of those LED lights in white i made something similar for the bottom of the Jeep no way as cool as yours i just took a 12' strip folded it in half amd slipped it in a clear tube and silicone the end 3yrs later because i DIDN'T take the time to do it right only half still work so im gunna make em like you do. Why not do a video on the 66 Mustang make it like a miniseries lol and man i could only imagine how much effort goes into youtubing it's hard enough to make things right let alone videotape yourself doing it lol
Lot of LOVE bro from LONG ISLAND NY
P.S.
You look like the lead singer of (five finger death punch) lol love there cover of BAD COMPANY
Dang ive never been told I look like singer lol but thank you , I think all those LED strip lights may stop work after a while , I only say that cause they all come from China now days , and white works good too so don't hesitate to use em , I just used green because that's what most pol use . I have a white light I use too.. I might do some different kinds of videos but I may start a new channel for em I really appreciate you brother👍
You can use clear fluorescent light bulb protectors instead of polypropylene tubing. the larger diameter bulb protectors will fit 1-1/4" PVC fittings. You can get a long clear light protector at lowes for $3.00 (cut to length).
Ive thought about that before, but it's still an extra step and it works great with our it I like learning it off , I use to just run the light steps down the bottom of my kayak lol
Thank u for the idea they are so much cheaper
HARGAR Plays just be careful not to drop them below 15ft. The water pressure below 15ft will cause them to start cracking longways from end to end.
I’ve started using 1-1/4” clear vinyl tubing. Not the braided type, just clear. Home Depot sells precut 3ft for $7.00. The 1-1/2” pvc sch40 caps fit perfectly over the outside of tube. Seal with heavy duty grade pvc cement and seal outer rim with Marine plastic epoxy.
I enjoy your DIY and informational videos. Great job! How deep do you think theses lights could go and still function well? 50 to 60 feet? Thanks.
I would think they could go 50 feet or more , but I've never tested that , I normally drop em down 2 too 3 feet that where I seen too have the best luck with em . Maybe that that's where the plankton is the most concentrated I'm not sure . I have dropped en down 15 foot or so , but didn't catch much there . I may have been in a bad spot , here's a link to a video you may have watched but that light is about 2 foot deep
th-cam.com/video/sP-ZbVfhZmU/w-d-xo.html
I know this is an old video, so theres no need for the outer clear tube correct.thanks for posting
No Sir no need at all , the light I made in this video has been used allot with no issues at all , so save yourself some money , the first one I made the clear tube coat 10 dollars , I'm glad i tried it lol , thank you for watching brother
Sweet Hack! Did this with my sons as a project they enjoyed it…used 24 volt and trolling motor connection “freakin awesome!!”
One question, do the lights get hot when not submerged? Ours got kinda warm on the test run.
They get warm but not that hot . On my drill battery hack . I ran it for 6 hours out of the water and it didn't hurt it none
that is a great looking light ! just wondering about something though...if you were to fill up the pvc with silicone , and let it set , would it be possible to push the silicone out of the pvc.......then wrap the silicone with the lights , and put that inside the clear pipe...........seems that would be a great light for working under a vehicle , in the event you were to break down somewhere....keep inventing man , you have some great ideas........
I do the same thing lol it might work man , I just left out the clear tube because the last one I bought 3 years ago was like 10 or 12 dollars and it really does work just as good without it as long as you stop water from getting to the wires and causing corrosion issues the light has a silicone type coating on it when you buy it
That could work
We used to hang a lantern over the side just above the water to attract the baitfish . is there any difference in the color of light if so why meaning does a blue light attract a fish better than White lake versus red light and so on. Thanks
I use red out of the water if you dont want to kill your night vision, ppl use blue lights in the ocean they say it penetrates the water better , in fresh water I think green works better for plankton I'm not sure why but I have white lights that work very well too . But most fresh water lakes have algae in them so the white lights put off a green hue any way , I made my DIY light green because that seems to be the most popular color for fresh water but I've used white more myself . I dont think you can go wrong with white or green , but striped bass fishermen have told me that white distresses the fish more than blue or green so it makes sense to use green I guess . I'm not a scientist though haha , I appreciate you watching brother . If you ever have anything to add to a subject feel welcome to leave a comment, thank you for watching buddy
I think you have a great thing on u tub Ron
Thank you Ron
When hooking to your drill battery do you put a fuse on the wire? Just want to make sure I don’t start a fire
Yes I would , and im. Sorry I didn't do that for the test . I was just seeing if it worked on the hack video . But yes I sure would do that
I have to make this
I have a newer video where I upgraded it a little
Great gonna make mine they are expensive when you buy from someone I see them for $75
They are very expensive , but they aren't that hard to make . How long they last I've found , depends on how good the LEDs are you buy . I buy a LED strip that looks well made yet I don't spend a lot either . So look around on Amazon and hey something decent. Thank you for watching and commenting
Great instructional video. I did not see you put a clear tube over your lights- not necessary if the LEDS are submersible?
It's not necessary nope as long as you buy water proof LED strips . I have a newer video that I used clear heat shrink tubing . I really like that light the best
How do you stop it from overheating? What battery did you hook it up to cause a 20v drill battery is to much...lol. it good in the water but I would like to use it camping too
It shouldn't over heat its LEDs . If the water proof LEDs over heated it would melt the waterproof coating
How long does the 1.25 pvc pipe need to be to make lgt. u can buy a 2 ft joint @ Home Depot for $ 2..00; will the 16.4 strip fit on 2 ft, if not u will have to buy a 10 ft. joint; is speaker wire 18 ga or 16 ga wire. Thanks Great Videos!!!!
I would buy the thicker 16 ga wire just so it'll be stronger but that's me , Leds don't pull much amperage . Im pretty sure 2 foot of 1.25 will work I gave that light to a friend I'm thinking it was 16 inchs maybe couldn't have been over 18 or 20 but you can go 1.50 to make sure there's no rules when you leave it the polypropylene but I think 2 foot is enough I'll be making some more lights soon , before storing any ways so check back by or click the bell . I'l try and be more thorough
I'm curious does it work during the day time. I don't know if the enclose dock I plan to use it at is open at night.
It might if it's dark or at least has dark water around it . All it does is attract the plankton
Thanks for the videos they help out a lot but can you make one that's cordless what a dimmer switch
Cordless is a good idea , but why would you want to dim it ?
@@FishinNStuff think bout this. You could have a backpack light that you can use in the water or on the bank and that's when the damage switch will come and play so if you want a little light or a lot
Any recommendations for a portable battery? Was thinking maybe like a small motorcycle battery but don’t want to overpower the led strip.
www.amazon.com/dp/B003S1RQ2S/ref=cm_sw_r_other_taa_JRY3EbPKRVNTN
What do you hook your lights up to. Boat battery or what. Could you use batteries like the ones that are used to run spin feeders for deer?
Yes Sir it will work great , that's all a kayak battery , ive used em . Sometimes I just hook it up to my trolling motor battery too
Great video on DIY fishing light; after using lgt for some time, is it still waterproof using supernight led lgts without polycarbonate tube as I would like to build one like your video and save on costs if clear tube is not needed. Thanks for your videos
I think it's going to last because I ran the same lights down the length of my kayak one year and it worked great and they aren't protected plus my old light still works fine and I broke the polypropylene not long after making it , I made it 3 years ago
Also I'm going to make a new kayak light that can be removed, it's idea ive have for some time now. I'l be posting that before long a little closer to spring time
was the 6 1/2 oz of sinkers enought to keep it from floating? I was thinking of using more weight. or do you still want the light to float at the top only?
It was plenty and no I don't want it to float so I can pick the level I suspend it at
Awesome video Sir, thanks for putting this out there for us. Question, my lights came in, but one end has some type of plug, maybe for a power supply or something. Did yours? If so, did you just cut that off and get to the two wires? Thank you again
guttercops one of the lights I ordered did , I've use these strip lights on several different DIYs I've made , and yep I cut the plug off and stripped the wires and inside was a red and black wire and you can figure it out from there . I appreciate you watching my video even more than you appreciate me making it lol thank you brother and if you have any questions I'll be happy to answer em pr find you an answer
guttercops hey this video right here , on the part with the light in the water and the shad circling it, that's the light I made on this video
@@FishinNStuff Thank you Brother!! man that answer came in at light speed! Awesome. I def hit the subscribe button. What part of America are you in? FL here.
How long did you have to cut the 2" pc pip to make it I bought the lights on your list .my son and I love your channel
I wrapped the lights first then when you get too the end of your light strip , cut the pipe and leave just enough pipe to glue the cap on
If you don’t want the sharp ends of the zip tie twist is and it will break and not leave the sharp edge
I was going to buy one but I'm going to make 3 , 2for my Friends ty
You can make one it's not that hard , just test all your connections before you close it up
Alrdy used UR links orders on the way big TY can't wait to make
Hey Fishin N Stuff. First off I love what your doing , keep it up. Just wanted to ask how the light holding up after almost a year?
It still works great all the videos I have where I'm green light fishing was made using that light , bait livewell, the how to use a green light video plus the one where I made it . And I gave it to a friend that's on the videos with me and he uses it now , still works good . The only trouble you can really have is , if your soldering is bad or if the lights no good . Let's face it they all come from China and I have had em stop working. So read the reviews on the light your thinking about buying , thank you for watching brother
@@FishinNStuff Cool man thanks for your response. Soldering skills are good but them China lights that's another story. Thanks to you and for what your doing to brother
Did your lights turn yellowish to brownish over time? I installed a bunch of lights on my pontoon and now the silicone covering on them has turned almost brown in color causing the lights to be far dimmer than when new. This happened after a very short period of usage.
No Sir but my lights aren't on in a boat so they don't get out in the water as much might be why , I only use lights mostly in the spring , occasionally in the summer ti catch bait
I listened again and you mention the polypropylene is not necessary. Thanks again.
It's not as long as your LED strip is water proof . I have a new video that I liked better
Going to have to build myself one to try out. Great simple video! One question. No inline fuse?
I've never used one but it wouldn't be a bad idea man , I probably should lolol
I guess ill just add one to be on the safe side
@@sithnameechai4145 I think it's a good idea even though I haven't had a problem you never know
Does the light get hot? I’ve ordered a couple led submersible lights from Amazon and they got pretty hot after awhile. This is a great DIY project!
No Sir LED strips don't really get hot