New LED Fishing Light ( like youve never seen )
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- This LED fishing light is awesome and super convenient to plug in . I hope you enjoy it .
Check us out on
Facebook
/ 997275703941362
For Fishin N Stuff Gear visit the Link below
www.etsy.com/shop/PebsPrettyf...
Check out my wife's channel I have videos on it too
Ta Days Crafts
/ @tadayscrafts
Thanks for watching dont forget to subscribe and click the bell for notifications
Shrink tubing
www.amazon.com/dp/B07GQJ75PT/... - กีฬา
Hey Keith. A little change in your shrink wrapping of the wires. Before you shrink it, squirt a dab of silicone in the tubing. Then press it to the center with your fingers, around the bare wire, and then shrink it with your heat gun. That way it will help seal the bare wire inside the shrink tube. If water leaks into the pvc it won't come in contact with the wiring. I do that anytime I'm wiring something at work that is in a wet environment!
That's a great idea man . I'll start doing that . But I don't think that light needs it . There's so much silicone in big ends ,,, no way its leading lol
Great idea, Thanks!
That's the way I do it for my bully netting lights
What kind of silicone?
Are you talking about the shrink wrap tubing?
That giant heat shrink worked better than anything I've ever seen.
I agree
What size and from where? But a very cool video thank you
Man, you got more fishin's hacks for damn near every situation. Love it. Simple, easy fixins. Thanks for all.
I'm a retired engineer and my specialty was lighting systems for military aircraft. I can convert the 12-volt supply from your battery to 24 volts with a relatively simple circuit. If Fishin N Stuff will contact me I would like to make it available through him.
A word of warning - silicone releases acetic acid when it cures. It will corrode copper wiring and will eventually eat through the wires. A safer sealant is hot-melt glue. It won't corrode your electronics and is waterproof.
I appreciate the knowledge buddy . If I remake this project again I'll remember that . Ol and my Email is keiff32@hotmail.com
It's in my about section on my page if you ever need it
My money is on this is one of the best channels on youtube
Best DIY fish light I've seen yet, I was actually considering something similar - saves me the research.
Now I have to decide if I want to cannibalise my light, because mine has an adapter for power to go with my Jackery power station. I plan to get into deep cycle batteries and found yours in a 2 pack on Amazon at a nice cost; all my power is renewable anyway so I guess it doesn't matter what I charge, although the goal is to go solar eventually.
Love how you do TA-DAY videos for the simple diy-er’s
I built your second version of the kayak nav light, and had to repair the strip due to corrosion from saltwater. I checked on Amazon not expecting to actually find a large and clear shrink wrap, but ended up finding marine grade with a heat activated glue that seals everyting underneath. The shrink wrap is also thick enough to protect the led strip from getting beat up. It's been perfect for two years so far. Thank you for the awesome videos.
Thank you Sir for watching
Do you happen to have link or part# for the marine grade heat shrink in big enough size for this project?
Wish we had school teachers that are as passionate about teaching as you are
Thank you
100% agreed!
Be
BRENT WILSON - maybe you will become THAT teacher!!
CSA, that's a no shitter
That plug was a stroke of genius! Great job!
BOOM !!!
There it is !!!
As always your builds are top notch, I'm a diggin it !!!
Thanks for sharing brother, tight lines and fun times. Peace
😎👍✌🖖🐟💥🛎
Awesome build fishing n stuff!!! Great times in the shop!!!
You have such great ideas and I really appreciate the way you go into detail on how to build things. Awesome channel and thanks for sharing. Keep em coming.
Thank you Sir
i'm so glad i ran across this. i was thinking about making a light because its so much cheaper, and you did all the leg work for me. thanks
I bought cig lighter plug&socket from Amazon and used on the ends and added to the boat and just plug them in when I use the lights,fish finder,etc.
I have also made a white light just like this to use while bank fishing.I took a lil plastic "ammo can" style box from Amazon and wired in a 9Ah 12v with a cig lighter socket.I also added a eye screw to the top of the light and use a 100' piece of para cord with a 6oz. bank sinker on one end to toss it up over any limbs,tele/TV cable lines to pull the light up to what ever height I want it at...up to 20-25' (length of wire to my battery).
A SAE plug will work too.
Now I like that. I recently discovered my retail float light had the plastic case broken... So I'll be doing a light line like this. The heat shrink tube is great idea.
Love your build!
My last one I bought is tiny and was expensive.
Going to build a big one like yours now!!!
Thank You VM!!
Thank you for watching
Awesome green light ! I really like that idea of the clear heat shrink 👍. Take care, and stay safe 🤴
Wow!!!! Super cool idea, love the heat shrink and the plug idea. You da man, again....
Sweet light. Think I’ll make me one just for fun. Great diy thanks for sharing
Another awesome diy build ta-day for ta-morrow, exxxcelent! Sir
Heat shrink tube idea sounds great 👍
Awesome, now all I need is a boat and time to use it. Thanks for all you do!
Hey they work off docks and off the bank too lol
Now That's Awesome... Really like that light!
What an awesoe build the heat shrink was a genius idea. Good job.
Thank you Sir
I always look forward to what I'm building next. Great video as usual.
Lol
This little light of mine. I'm gonna let it shine. Great job. Awesome 👍
Haha i remember singing that lol
It’s just gets better an better brother!
I'm going to have to build one and try it for shrimp here in florida. Thanks for the video! Love your stuff!
Very good video. We've been doing this for the last 5 years works great!
Awesome. Your projects amaze.
That light is freaking awesome ! Great job Keith !
Thank you sir
heck yeah next project ordering lights. made my drift bar 3 wks ago works great. just need better rod holders but i do try some of you projects thanks for the diy videos i have saved a lot of money watching you as well as getting some humor thanks brother
Thank you brother
Loving this channel now all I need is a frikin boat 🚣♀️ lol 😂, ty for all your advice sir.
nicely done!!!!
Man, I don’t even fish and somehow ran across your channel. I love your refreshing, entertaining teaching style. I’m sure I can use some of your hacks and know-how somewhere around the house. You, Sir, have earned another subscriber! Awesome job!! Thanks!!
Thank you . I agree some of the techniques are what interests me because you could use them in different ways . Kinda like the epoxy tumblers people make now , well that's the way they have been making wooden lures for years . They dip em in epoxy and rotate em till dry . The ideas are what's important
@@FishinNStuff well, just sayin, you certainly have earned my respect. Thanks again. I’ve enjoyed many of your vids the last couple of days. I will certainly share your channel with my work buddies that happen to be into fishing.
You are right, Buddy. They DO make everything, but I seem to see it here first. Shrink tubing is the new duct tape, that stuff is awesome. Keep up the great work! Love this channel.
Thank you Sir
Well...This is my next project ! Good Job!
I'll use that here in Florida. Works great for shrimping
Awesome build im doing this.. instead of installing a plug just splice in a quick connect into the existing plug wire. Cheaper and dont have to unplug the trolling motor itll still work aswell (the trolling motor)
Man you are FREEEEKKKKKKEN AWESOME!!!! Bucket list fishing trip with you is a definite WANT TOO!!!
Awesome DIY will be making one with the shrink wrap.. I do have a 10' 1/2 conduit I hook my light now to with a small chain and screw eye.. I place the conduit in a rod holder,,, it allows me to extend my reach of the lit circle not just straight beside the boat.. Keep up the awesome builds,,, luv'm
That's a good idea
Heck yeah dude! I like that light and shrink tube idea a lot! Awesome build man!
It'd be nice to be able to put the LED controller in there. So that way you can change the light to white green red whatever you would like. Thanks for your time. Excellent video
Love it great job
Awesome video! Thanks for making everything easy to understand and sharing your great ideas!
Thank you Sir for watching
Another awesome video! Thank you!
Fishin N Stuff, great DIY! I need to make one of these so I can do a night fishing video on my channel! Keep doin what you do!
Thank you Sir
Damn right those ratcheting crab claw PVC choppers and the best for fast clean cuts! Best tool for cutting PVC pipe ever, no mess, less effort snd fast cuts! 👍
Awesome job! Great video!
Not for nothing but big box stores (Home Depot or Lowes or both) sell clear tubing (basically, hose) by the foot for not much money. Certainly less than heat shrink. Just buy tubing first and adjust all other dimensions to it. They also sell barbed push on adapters w thread on other end to allow sealing w a cap. Weights can be added to adapter and cap. Works great. Tubing fairly thick-walled so should cushion fairly delicate leds. GREAT VIDEO!!!
That's another option for sure , the heat shrink isn't too expensive, the plug really run up the price . I just wanted to try the tubing . The last light I made with nothing and it still works great
Great job!!
cant wait for the field report with this light sir ^^
Yes Sir 👍 Why buy it when you can get the satisfaction of building it yourself 🇺🇸 Turned out AWESOME as usual 🎣🎣✌️
Man that's slick as eel snot! Cool build!
Lol
I have to make one, LED is the best lights ever!
Sweet deal! I love the plug idea!
Thank you Kevin
Very nice idea and built...shrink tube and plug connection were brilliant!
One suggestion though, just to be on safe side and mitigating any possible lead, I suggest applying some sealing silicone to both ends of shrunken tube on the caps and then applying two short sleeves of the same shrink tubes on top of the caps so no water could ever dare to sip into! 🤓
Big thanks for your cool works!
That's a great idea . The only reason I didn't really worry about it . Is because my 2nd green light I built , I did put any cover on it and it's still working today . As long as you use water proof lights you should be ok
Nice like that heat shrink
Okay, you have convinced me to build one. I'm just trying to catch shad, I hope this helps. Great video thanks.
It does attract shad but I usually see shad after I've fished a couple hours . They make huge circles around the light
Love it and stuff 👍👍
Great idea, Thanks !
Love your videos you have some amazing useful tips that I have used several of and plan on using more. Keep up the good content.
Thank you Sir
For a neat clean install, you can run your trolling motor wires thru the deck near the trolling motor. Then put ring terminals on the wire and put them on the BACK side of the boat plug. No more wires across the bow...unless you plug in your green light to the now-empty trolling motor socket!
My bass boat has black light jacks (3) front rear and center in the top cap. I put guitar plugs on all my lights(2 black , one green flood) going to build one of yours for anchoring down for crappie at night. Gonna go a guitar plug on it after seeing your plug idea!
I usually tie a knot in the cord to prevent it from coming out of the hole.
Great job !
I do too but I didn't want to break the copper wire inside
Great video friend! I'm about to build a green LED light for squid fishing this winter! I'm going to use some of your expertise to tighten it up!
Thank you Sir
Awesome video. Thanks for the videos.
It's a rain day up here in Nova Scotia 🇨🇦. Working in my shop with your diy videos playing. Was watching this one and just heading into town to pickup the material for one of these. It's no wonder you have so many subscribers. Well done and fun to Watch. I have a bunch of my fishing buddies watching them now and they have subscribed also. Cheers from the east coast 🍻🇨🇦.
Thank you very much for all your support , and thank you for watching . I really enjoy helping people and making them laugh , but it's people like you that keep me doing it
Another excellent and informative video. Thank you.
I enjoy all the videos
Awesome light
That was very good‼️‼️‼️‼️‼️‼️‼️‼️
I always like your videos, such awesome ideas with the pole holders and fishing lights. Don't care much for the LED rigging glove, kind of odd, always use my head lamp if I need a hands free light. Keep'em come'in , always watch'en !!
I agree , it's not for everyone . I just think try and include everyone though . I appreciate you watching brother
Keith, once again you knocked it out of the park Brother!!! Worth $50 in the first night's catch!!! It's time to clean, cook and chow down, Amen!!!
w.w./ Oklahoma
Thank you Sir
Extremely practical video..easy to understand
Made my own… this thing rocks
I love your builds
Thank you Sir
I saw that little battery and I thought you were building a self contained floater you could put out and move back to fish it. but this is cool I did one of the no cover versions last year, but I got to copy this.
Cool idea and work great...when not illegal in your area 😜
The plug is a great idea
That is pretty cool. Going to build one of these
Awesome as Always!! Was watching and guess I had that look about me because my wife was ready to hear what I was thinken.....lol
Soooooo I said well I would put another outlet and battery isolator switch off the main line where I could run one or the other or both and an off point.
You know how it is - always thinking and remembering how the last time you settled you wished you hadn't.
;) Have a great weekend
Yes I do know how it is lol trust me
Another great video
This is your BEST FISHING HACK 👍🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿
Great job dude
Nice job brother
I love the music on this video. also Thanks for the DIY, this one was really interesting. Subbed and awaiting new videos.
Thank you Sir
Good job. Thank you for sharing.
Thank you for watching
They have the LED Strips in Waterproof with a remote where you can make the light any color that you want. First time I seen these light was years ago - they put in an ATV Park near my house called Muddy Bottoms and the took old fiberglass CB Antennas and wrapped them the way you did the PVC with the Clear Heat-shrink,
Frickin awesome. DIY Master!!!
Ol thank you Sir
Another great video!
You are the bomb! Thanks for sharing.
I work at Cabela's and so many times I get people that are brand new to fishing and they want to ask me every question under the sun. I recommend every last one of them to your channel. I love fishing and I could talk about it all day long, but I can't get productive stuff done talking to people for 2 hours, so I send em to you! I hope they enjoy their stay.
I really do appreciate you doing that brother. I like helping ppl , and thank you for your help brother
2 things. A cigarette light plug installed would allow you to use light and troll motor at same tume
#2
Just tie a simple overhand knot in wite to keep it from coming through hole in cap.
Awsome light, can't wait to build mine..
Your right about the knot . I really think the silicone will hold it any way but I just didn't want to kink the wire . But I love the plug the way I made it fit the way I fish
You really are a genius man!!! Kudos!!!
Thank you Sir
Very nice, this might be a build in my future, keep up the hacks.
Perfect timing. I was a about to go buy 2 of these type lights. YOU R DA MAN!! Like he said: if you aren’t subscribed hit that button. And before you go out and buy anything to do with fishing it would be worth your wild to scroll all of his video’s. 9 of 10 (if not 10 out of 10) times he’s got a video on how to make whatever you need’n.
Thank you brother , i appreciate it
Fishin N Stuff can you shoot me an email? I got a couple of questions? Mine is jjtt321@bellsouth.net if you can.
I am new to watching you here and really enjoy the different ideas you have this is great..👍
Love your passion for your projects. Just found the channel and having a blast watching.
Kinda like the idea of one of these lights, just for the garage. But, I might suggest when covering with heat shrink, maybe cut the ends, more like a battery wrap? Where it slightly overlaps the end. Still awesome!
That's a good idea . I was just trying to clean it up . It's water proof with or without the wrap . I appreciate you watching
@@FishinNStuff Oh it looks amazing and a lot tidier with the wrap. Just kinda my thoughts with wrapping a lot of batteries 🙂