This is by far the easiest and most simple instructions I found for this! I watched multiple videos and this one helped me the most!! Thank you so much Justin!!!
I bought this router, rented an Azure Ubuntu VM in Canada. Setup openvpn server, setup my router with openvpn client- my company doesn’t allow me to leave Canada. I bought a plane ticket to Thailand, the vpn has been working while I’m in Canada - let’s see what happens when I go to Thailand. I think it’s gonna work 💯
Thank you! I need to make an updated video for NordVPN since they have switched to using Service Credentials instead of your actual username and password. Your Service Credentials can be found on the NordVPN Website.
This is a great informative Video! Thank you for putting this together it was very helpful. I also like the layout of the video interesting to put the unboxing at the end. - Thanks again and hope to see more content.
Awesome! Thank you! One important change since this video was recorded is that you need to upgrade the firmware and use the NordVPN Account Credentials from the NordVPN website instead of your actual username and password!
Hey Justin, thanks for this video. Just a few quick questions that I haven’t seen asked in other comments: 1.) If I connect my Work Laptop AND other Personal Devices to the same flash router, will the Work Laptop be able to see and use information from the other devices on the network? For example: if my Work Laptop is connected to the router and has it’s location services turned OFF… and my Personal iPhone is also connected to the same router with its location services turned ON… could the Work Laptop potentially use information from the iPhone to figure out it’s location? If so, is there a way to mitigate this? Would it make a difference to: A.) Use 5G for Work laptop, 2.4G for Personal Devices…? B.) Connect Work Laptop to router via Ethernet only and Personal Devices via WiFi only…? C.) Or would you suggest to not connect any Personal Devices to the router AT ALL while the Work Laptop is connected to it…? Would any of the above be overkill…? ------ 2.) I noticed a setting in the Admin Panel that says “Block all Non-VPN Traffic”. My understanding is that if the router should lose the VPN connection at any time, it will stop supplying internet altogether. This is what I want. Can you confirm if this is correct? ------ 3.) Is it necessary to run encrypted DNS with an active VPN? If I don’t, could my Work Laptop use DNS Server information to reveal its real location even while connected to VPN? I’ve been seeing online that encrypting your DNS while running a VPN simultaneously can cause leaks and issues. I followed your advice anyway and setup my DNS settings exactly the way you did in this video. I have not run into any issues. But just want to be proactive in making sure. Thank you in advance 🙏
1. It's kind of an open secret that MANY companies are "secretly" selling your personal information all of the time, including your GPS coordinates. Android and iOS have prompts to allow Location access to apps, but there are apps that need it for a legitimate purpose and they secretly sell the data at the same time. This is how some websites know your precise location before you even give it to them. Instead of your IP Address location coming from ARIN (the registry) they bought precise data from a broker. In addition, if you login to the same account on your work and personal device, the location could be shared between devices. On windows and Google this is a helpful feature, unless you are trying to turn it off. 2. Yes, you want that enabled, it was on by default when I made the original video. I need to explain that toggle when I make the updated video. It also helps block some of the tricks used to reveal your location. 3. I just prefer using CloudFlare as my DNS provider.
Hey Justin, thanks for the quick reply. For question 1, I’m more so curious if the client devices running off the Beryl Router can see and collect information from each other? (Assuming VPN is active). I never sign in to any work stuff on my personal devices. But if I were to connect my iPhone/Laptop/etc… to the router while my work Laptop is also connected to it, would the Work Laptop be able to see and access information from those other devices on the router’s network? ------ For question 3, Cloudflare is fine but to your knowledge is there any chance that encrypting the DNS could cause the VPN to fail? If I set the DNS Mode to Manual with Cloudflare instead of Encrypted with Cloudflare, will the Router’s Clients’ real locations still be shielded assuming VPN is active?
1. Yes, the Local IP Addresses and MAC Addresses will be visible to the other devices. This does not give your work device GPS access from your phone, but in a roundabout way it is possible as I described earlier through nefarious practices. 3. Not that I know of
This is so helpful - truly creating unique helpful content! Are you able to connect your computer to your work’s vpn with this method and still show your location in the US? Or would you need to use the method of your other video with both routers?
Thank you! Unfortunately it varies by company -- although in both videos your location could be the US, some companies actually check your IP Address to see if it is from the city you live in! So the other video works in more cases. If you already have a VPN account you could test this method first, otherwise the second router actually costs less than a VPN subscription anyways.
This video just solved my current problem. Thanks! Question, I also have a Solis. It hit or miss in certain spots. Do you have any other one you recommend? It worked amazing in central america. Having issues with it in certain European countries.
Between the Solis and T-Mobile I usually have at least "dial-up" speeds for checking email. Many European countries have lots of free WiFi which is usually insecure, but not a problem once you add in the VPN from your travel router or from the VPN app on your phone such as nordvpn or windscribe.
I got the router using it as a repeater, installed Nord VPN on it, and the router is connecting fine to my cell phone and personal laptop. I attempted to connect to my work laptop (which has another VPN on it set up by the employer) it kept saying "Can't connect to this network." I tried resetting the router, but nothing happened. What could be the problem? and how to resolve it? Thanks in advance!
If the VPN is working, then it could be your Employer is blocking the Commercial VPN Service. In that case you will have to run your own VPN which uses your actual Home IP Address: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
This seriously is a wonderful tutorial and I love your knowledge and process here. You explain everything really well. I was curious about a handful of things 1) Can you apply your own device VPN (Say work VPN) on top of this? 2) Can you have a killswitch that prevents the Travel Router device from connecting to internet unless it has that VPN (through dallas) set up? 3) How does the 30 mbps do for having video zoom calls for work? 4) If I am not mistaken the process is (wifi locally -> travel router -> vpn -> $$$) and your local laptop or phone connects to the travel route (but the local wifi powers the travel routers internet, and is obfuscated by vpn).
Thanks you! 1. Yes, but your company might have restrictions on the type of IP Address you are using. Most VPN services will provide a Commercial IP Address, if you need a Residential IP Address you typically have to pay more OR you can run the VPN Server yourself from home using this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html 2. Yes, from the Global VPN Settings page you can toggle "Block non-VPN traffic" 3. This is actually a complicated topic, your video quality will be dependent on Download, Upload, and Latency. If you go to another country, try to get on Fiber Optic Internet to reduce your latency. 30mbps is fine, but the latency will cause lag if it is too high. 4. I can't read number 4 from the app, will add another comment
@@justinreviewsandrepairs5246 what if the residentiel router got powered off 🇨🇦, will my pc get connected to the residentiel router (abroad)🇹🇭 or connection will just be dropped until the 🇨🇦 router get powered on
@@justinreviewsandrepairs5246 Or ⬇️ On the left side of web Admin Panel -> VPN -> Internet Kill Switch This feature is make sure the devices connected to the router always access the Internet via VPN.
I’m trying to connect a Flint router at my brother’s house directly to his internet service provider, and trying to set the Beryl AX along with my sister who is in the DR. I set up the dynamic DNS and downloaded the client QR codes for her Beryl AX router and another one for mine. She has connected hers to the internet modem at home and set everything up on the Beryl AX but the light is not turning from orange to Green establishing the connection to the Flint here at my brother’s. We need help 😞
You say directly, but some cable modems are also a router so you would have to set it to bridge mode or do Port Forwarding. Feel free to send me your error log from the Client Travel Router to support@JustinPruett.com
Hi Justin, thank you for the video, it's really helpful. I just had a question would really appreciate your insight on this. So I am basically using a personal computer for work and my company had WireGuard installed as the VPN and the remote desktop. Would I need to use this method, or could I just install another commercial VPN on my device such as Nord, Express, ect. and run it together with WireGuard, would that work as well if I plan on traveling internationally?
Probably not, the software isn't setup to run two VPNs on a single computer. Using the router allows you to run a VPN on the router and another on your computer.
If you set your home up as a vpn server can anyone connect to it with out your permission or is it guarded some how with passwords were only ppl with login can access that vpn u created with home adress?
It depends on what sales or coupons are available but typically two Beryl AX are the cheap and easy option. The Brume 2 is a little harder to set up without WiFi but is a good option for home.
The VPN setup in this video did not work of me. I entered my Nord VPN credentials directly into the router admin page as you showed in the video and it wouldn't connect. I had to log on to the Nord VPN website and then click on the manual setup option on the website and then I was emailed a one time User ID and Password and then it finally worked.
You wonderful person you!!!! I would kiss your feet if you were near me. You don't understand how long I have been trying to set this up with no success. I did what you stated above with the manual setup and it worked!!! Thank you so much!!!! ❤️🥰
So how do only need one router instead of two like your other video states? I work on a locked computer meaning i cant mess with any settings, so the router i use has to be setup so that all i have to do is plus in a ethernet and work away. If what im seeing is correct, then i only need to buy this one router, use my laptop to set it up, and then I can take it anywhere with me, plug into my work computer, and it will look like i working from home? Or is that the video with two routers? Thank you for the vids... Im just really slow with tech stuff.
There are two different methods because in this video we are using a Commercial VPN Service which is blocked by some employers. In the video with 2 routers you are running the VPN Service which is not blocked by employers. If your employer allows Commercial VPNs, this is the easier method. In either case you are not modifying your work device or the remote Internet. When you run your own Server on your own home Internet you simply open a single port to allow the Client to connect remotely.
I’m looking for the advanced setup. Do you have a video for it? I have two slate atx-1800 and wanted to use one when I travel to connect to one set up at home that is repeating. Have watching this video a couple times and still stuck
I followed your steps, when I Enable OpenVPN client ..I get this message" The client is starting, please wait…" but it never connects and it also disconnects me from internet.. Any idea why its not connecting?
Sorry, this video is due for an update. NordVPN changed the way you login, you need to use your Service Credentials now instead of the account username and password. In addition, you must update the travel router to the latest firmware. In some cases you may need to factory reset the travel router after upgrading the firmware to wipe the previous account credentials from the memory.
Can i plug this router into another router and it will work the dame way if i use a ethernet from this? Or would i have to connect this router via wifi to the main router and then connect my ethernet to this router? I cannot turn off the main router at the remote location so whatever i use has to work off of that. I cannot change and setting on the main router that this would plug into. Im guessing im screwed.
Hi Justin, with my company laptop the location services is locked by admin and is always set to on. Would I need to set up my commercial VPN on my router all the time whenever I want to connect it to a WiFi? Or is it automatic (ie: when I connect my router via repeater when traveling to a new place, it will automatically be connected to VPN)? I’m worried that by logging in on my work laptop and connecting via repeater as my first step, will give my location away. This is assuming that I can’t connect my router via LAN cable
You should use a personal device such as a cell phone to connect the Internet at a new place. Also be sure to turn back on "Block Non-VPN Traffic" after connecting the first time.
Great video and thank you so much for doing it quick question when you connect the device do you connect it with your own personal laptop or work laptop
Thank you, for the initial setup you should use a personal device such as a laptop, phone, or tablet. After that you only need to use a personal device again to connect to any new WiFi networks such as a Hotel. Personally, I use my phone Hot Spot so the router just reconnects to that automatically. If your question is more about if this works with work devices, the answer is it varies by company. There are two videos on this channel, one for using a Commercial VPN provider such as NordVPN and the other is where you run your own server so you can use your actual Home IP Address. If allowed, the Commercial VPN provider typically provides the best speeds, but running your own server provides better ambiguity of your actual location. Keep in mind that if your work device has GPS or Cellular antennas, you will need to do more work to mask your location. That is not common though.
Justin you are doing god’s work. Can a company know where i am even if i use this method, on a company issued device? Can i do this with a device my company gave me?
If the device has GPS or Cell Phone tracking, then Yes. Most don't. As far as methods, this video uses a commercial VPN which uses a data center grade Address. The other method is better because you use your Residential IP Address: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
Hi Justin. I have a question please. I dont need to have my IP home address because I am allowed to travel within Europe and work from Europe. But if I want to go further and I will tell my boss I'm in Spain by example, when I'm connected to a Spain server via VPN will the ISP be shown as being from Spain too or it will show the real ISP where I'm actually located (the IT department will ve receiving traffic from my actual country I'm in). Is there other way that they can see I am not in Spain if I do all this trick? Appreciate your answer. Thanks a lot.
Hi George, if you choose a VPN in Spain it should be located in Spain, but that is ultimately managed by your VPN service. If your device has GPS you might want to turn that off and be mindful of your background on any video calls.
After watching this video…I understood that you do not need to be home to set this up and if you already are travelling you can make this happen even if you left the country ? because I already left my home country and I am trying to use this to bypass my work VPN…and make it look like I am still in the same country..please let me know..thank you once again
"The interface is connected, but the Internet can't be accessed" I keep great this error message whenever i connect to any wifi with my travel slate ax router. I was able to connect my mobile hotspot to the travel router but its extremely slow. I even tried using wired connection on the travel router. It connects but the wire guard doesn't connect so I can't use the wifi from the travel router.
It depends on the settings of the computer, but you can set the time zone on the router if your computer is configured to get it from the router: docs.gl-inet.com/router/en/4/interface_guide/time_zone/
Will I still be able to use my employers VPN installed on my work laptop in addition to the VPN through my travel router which would mask my location? Or is it either or?
Yes! Because the router is running its own VPN you can continue to use your laptop as normal. Some employers don't allow commercial VPN service IP Addresses, in that case you may need to run your own: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
It’s me again asking the same question !!! Can I use this to by pass the VPN installed in my work computer ? It’s a work computer and I don’t have administrative rights, so only IT can make change to my computer..so I am wondering if I were to type the ip address on my work computer will it block me from access the online setting for this device! Patiently waiting on these answers ! 😊
Yes, the VPN service is on the router so no changes to the computer or necessary besides plugging in a cable or connecting to the WIFI. You can access the GL.inet dashboard using your phone.
That zscaler app has full access to your phone, they might be able to see what cell tower you are connected to even without GPS. They could also see what WiFi networks are around you and determine your location that way as well. As for the actual connection since you are using a travel router that does the VPN connection they would not actually see the VPN from your phone but because that app has full access they can guess based on the networks in your vicinity. I wouldn't risk it but I would also look for a new job...
Hello! This was very informative thank you. I was wondering once I connect to the gl router and vpn like you showed do I still log into my company’s vpn that’s already on my laptop when I sign in or do I just not log into that?
Yes, many people use this method so they can securely connect to their company VPN while abroad. Some companies don't allow NordVPN, and in those cases you can simply run your own VPN Server with a second router: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
Hi Justin, thanks for the video it’s very informative, but for some reason the VPN doesn’t connect for me, it just stays in “The client is starting, please wait” after I choose a server. Any idea what the problem could be?
NordVPN changed the way you login to use "Service Credentials" from your NordVPN dashboard instead of the usual Username and password. If that does not help, please click View Log on the VPN Client page and email me the errors to support@JustinPruett.com
Hi Justin, thanks for the useful information. If I had a Flint and a Slate AX, do I have to connect the Flint to another router, or could the Flint be the one and only router (connected directly to the Modem) at home and have the Slate AX be the travel router?
Quick question: when you configure the client vpn through NordVPN, how does it obtain local dns? In addition, what is the difference between client and server configuration for the vpn? Like if we purchase dedicated static IP address in Dallas, that will be considered as server configuration? That would be great if you could share the training video. You are the best
While connected to the VPN you would be using their DNS server unless overridden from your device. While off the VPN the travel router has a DNS settings page you can configure. If you purchase a dedicated server IP Address you will need to select the server they assigned to you using the manual OpenVPN configuration
NordVPN has changed a bit to where you will need to use Service Credentials from the NordVPN dashboard instead of the regular username and password. You can reach me at support@JustinPruett.com
@@justinreviewsandrepairs5246 I know this might be a lot of work, but could you give me step-by-step instructions? I’m trying to figure out if I connect to my home Wi-Fi first then I connect to the GL Wi-Fi after I sign into it I am still having issues
First I want to say thank you for making this video, Justin! Although I am still confused, I think once I watch it a few more times I will get the hang of it. Just to confirm, this method will allow me to connect to my home vpn when I am abroad? As in, if the IT team checks my IP it will display the one from my home? To access certain documents in my company I have to briefly switch to an internal VPN, will this switch reveal my true IP address? (Btw do you do online consultation sessions 😅)
This is not the Home VPN video, this video uses a commercial VPN provider for when your employer only requires your IP Address to be from a certain location. If you want to use your actual Home IP Address, see this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html Running a VPN from home allows you to use your actual home IP Address instead of a commercial VPN IP Address.
Will I be able to use this with a WFH job with a tower and 2 monitors? How would I use this to still travel and have my computer still connected as if I'm still working from home? I have so many questions and need your help.
The VPN is on the router so you can obscure your IP Address location. This other video shows how to use your actual Home IP Address abroad: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html There is another video for portable monitors if you need to travel with them.
@@justinreviewsandrepairs5246 I watched the video I'm not sure if I can use portal monitors I'm okay with traveling with on they gave me I just want to make sure they don't know where I'm at when I'm working the company is Alorica.
Hey Justin! Thanks for creating this content. I have a NordVPN account, connected successfully. However, when I attempt to connect to OpenVPN it sits in "The client is starting, please wait..." Any idea why I'm unable to connect?
@@justinreviewsandrepairs5246 Not having any luck. I also reset firmware and started everything from scratch. Do you happen to have any other suggestions?
Maybe I’m confused but the computer isn’t connecting to a VPN - but the router is? And then your device just looks like it’s on a regular Dallas Connection? My IT department can detect when someone has a VPN on their device but this might be different I’m not dure
Correct, the Router is connecting to a VPN so there is no software to install on your computer. If your company does not allow Commercial VPN Providers then you will need to run your own: th-cam.com/video/LXbDg1v65Qs/w-d-xo.htmlsi=zd5kBA5uxHeQTqUZ
Does the router support more than one vpn profile? Let’s say I have two devices and each one should “be connected“ from a different location . Coil I just create two profiles , set each one on a different location and connect individually to them?
Hey Justin! Super helpful video but I can't see to get the connection with nordvpn to work. It keeps saying please wait for connection to start but never does and I've tried multiple different servers
Sorry, this video is due for an update. NordVPN changed the way you login, you need to use your Service Credentials now instead of the account username and password. In addition, you must update the travel router to the latest firmware. In some cases you may need to factory reset the travel router after upgrading the firmware to wipe the previous account credentials from the memory.
Thank you for this. I followed all the instructions however once I enable the vpn its stuck on " the client is starting , please wait " .. I tried it yesterday and today. I also changed locations and still nothing. Am I missing something?
Have you upgraded the firmware? A firmware update is required, but there is also a bug when upgrading the firmware where sometimes things don't get reset properly. Please reset the device then try again. Also keep in mind you have to use the access credentials from NordVPN, you can't use your regular username and password anymore. I will need to make an update for this video. Sorry for the confusion! Feel free to email me at support@JustinPruett.com if you still have problems.
Once I connect this travel router using Wi-Fi (which is the repeater option) Can I get wired Ethernet connection by connecting a Ethernet cord to the router then to my desktop?
With or without VPN? With VPN yes, without will vary based on the other hardware: forum.gl-inet.com/t/axt1800-as-a-wifi-to-ethernet-bridge-possible/29623
Hello, great videos. Can I set-up ATX-1800 that I want to use as my Wireguard VPN Server BEHIND my Verizon FIOS router (meaning on a LAN port on the Verizon Router) and leave the WAN port connected to the WAN port of the Verizon router As long as I do port forwarding on the Verizon router? I would prefer not to connect the ATX-1800 directly to the WAN port from the Internet box. Thanks
Hi, thank you, yes! My Frontier service was bought from Verizon so the setup should be similar to the video but here is another video that shows how to see which IP Address you are forwarding to: th-cam.com/video/LzBa6KsfG9A/w-d-xo.html
Thank you for doing this. I am following your instructions but am getting stuck at switching over to GL-AXT1800 from my internet. It's not connecting. Can you assist with troubleshooting what the problem could be? Thank you.
There are 3 ports on the Slate AX, two of which are LAN and one is a WAN port for connecting to the Internet. Are you plugged into the LAN port or the WAN port (Should be LAN)? Does the dashboard on the GLiNet router show a Green Dot indicating that the VPN is connected?
@@justinreviewsandrepairs5246 Thank you so much foe the Reply! It is connected to LAN and the router is with a Green Dot indicating that the VPN is connected. Via Wifi its working just fine
Hi Justin I bought slate atx 1800 to use it during my travel . How do I go about connecting to hotel WiFi ? As I need to enter login and password . How do I go about setting it up . Can you help ? Thanks
Many hotels use something called a Captive Portal. Before turning on your work laptop you should use another device such as a phone to get the travel router connected to the Internet. Connecting to the Captive Portal requires turning off the VPN temporarily to login to the hotel portal: docs.gl-inet.com/router/en/4/faq/connect_to_a_hotspot_with_captive_portal/
Will this internet traffic still be visible to an employer as obvious VPN traffic? Is that where a site to site VPN is needed (one of your other videos)?
Yes, unless you specifically purchase a residential IP Address from the service provider the IP Address will be identified as a Commercial IP Address which would be obvious. If you are curious how an IP Address is registered, you can search for the IP Address on ARIN: search.arin.net/ This is why many people use the other video to use their actual home IP Address.
Hi Justin, great video. Got myself one and with your link I signed up for NordVPN. I can’t seem to get the vpn client connection started. It just stays on “the client is starting, please wait…” yellow tab. Any ideas how to troubleshoot? I’ve rebooted and reset the firmware and no luck
Thank you, the process has changed a bit since this video was made, you have to use the credentials from the NordVPN website called "Service Credentials" instead of the usual username and password. There is also a bug in the firmware caused by this change, you will need to upgrade to the latest firmware then do a factory reset to prepare the router for the new "Service Credentials" Let me know if that still does not work. Thank you, Justin
@@justinreviewsandrepairs5246 is it possible that I can contact you for help setting the router up this is my first time working a WFH and I'm not sure how to set the router up
@@justinreviewsandrepairs5246 Heyyy I thought I replied back to you but I wanted to ask if its possible if I can contact you for your help on how to set up my router and how to use it for my WFH monitors.
Im not smart but so i just need to config vpn to connect to vpn server in Dallas? Then once plug or connect to internet in Tokyo? It think Im working in Dallas is that how it works?
Yes, your IP Address would be based out of Dallas in this example. You can choose any location your VPN provides. One important note is that this does not change your GPS location, so if your work tracks you via GPS you will need to solve that problem as well.
Hey Justine I followed all the steps but for the past two days the nordvpn is still starting “the client is starting please wait…..” is there something I’m doing wrong
@@justinreviewsandrepairs5246 Yeah I have turned off the nordvpn on and off and even rebooted the router still the same issue. Can I please give you my email to reach me there please I really need help setting this router up please
I got your email, I will try to reply in about 18 hours after sleep and work. I will try connecting to the same server you sent and see what errors I get.
Hi great video and clear instructions. Can the ISP of the VPN location be obfuscated or customized as a local carrier instead of the default shown ISP when converting the IP address and get its location and ISP and ASN searchable number? Thanks
Thank you! If you want to use your actual Home IP Address you will need to leave a second router at home that shares the Internet through WireGuard ®️ or OpenVPN to the travel router you take with you. Please see this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
any advice for faster connection speeds ? other than disconnecting the vpn bc obviously i need that part .. im nervous wifi out the country wont be able to withstand the work i do
I usually pick a hotel that has WiFi, but I also have T-Mobile so I can pay for International Data if it is not fast enough. Many cell phone companies have International data available for an additional fee. In some countries, such as Japan, you can rent a WiFi hotspot that usually has pretty good speeds. In other countries with limited infrastructure you may need to buy or rent Starlink service. Hope that helps!
Hi Justin, I was testing this at a hotel, but I was getting "Subnet conflicts. Please change LAN IP address. Set LAN IP" when I try to connect to the hotel wifi. What would cause this? Now I was using a mini router. I plan to buy the one in your video when I get home through your link. Thanks.
I have not used that model, but did you have the IP Address set to manual? It kind of sounds like DHCP did not negotiate with the hotel router. It could also be the Hotel requires you to login or accept terms of service. In that case it gets more complicated but you would accept the terms with your phone then have the travel router use your phones Mac address.
Hi Justin, is the setting up of the router (going to the web portal to set up the router) done on a personal laptop or a work laptop? My understanding is that you were setting it up on your personal PC
Would they be able to check my location through the WIFI I’ll be connecting with through VPN? I heard that they can also track location through wifi. Thanks!
You may be referring to this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.htmlsi=FDO2IeKMIxbTMWEf and the answer is Yes. The router connects to one VPN and then your work computer can connect to another VPN.
Question so im using it everything works find except one program when im in dallas i use my normal internet and my calling software works perfectly fine, but when i use the slate ax it has an error message on the software every 3 min and i have to refresh my window for it can keep working any help on that ??please because i work as customer service rep ….
Are you using NordVPN? They offer many different servers so I would start by selecting a different server, if that does not work I would make sure the signal strength is good. If that still doesn't work you might want to reach out to GL.iNet directly to troubleshoot further. Another option might be to try a different VPN provider completely, besides NordVPN I also like WindScribe
I tried to follow your other video where I got an opal and slate router to use my home IP address but I could never get it to work. I then went on to follow this video with just the slate router because it seemed easier. I'm still stuck. I set up the slate router on my private PC and set the location to another US city(miami) to see if it would work. On the gli net admin page it did work as you said and my IP address changed. I checked my weather app to see if the location changed and it showed the weather for my current location, not miami. To me this indicated that the VPN did not change my location info just my IP address. any help regarding this? My biggest issue is I thought once I set everything up on my personal pcp that I could just connect to the gl-atx wifi and be good to go because my work laptop has blocked my ability to go to the 168... webpage to access the gli net admin panel. Also when I check my weather(location) on my work laptop it was my current location not miami. I will also note that once i connect to wifi on my work laptop i have to connect to the VPN already placed there by my job before i can access the internet. I am looking for the workaround that allows me to just connect my work laptop to a wifi without any further steps on that computer I am really concerned because I am traveling out of the country and my work laptop will not work on a wifi that is not a domestic IP address. Can you please help. I have been working on this issue for weeks and have sent many messages. As stated before i am willing to pay for your time because after buying 3 different routers, getting a nordvpn subscription and also getting a goodcloud and zerotier account i am still not accomplishing my goal.
Hello, both videos cover changing your IP Address to another location, but weather apps will use your GPS coordinates which are not altered by changing your IP Address. If you sign into any app on both your laptop and phone that shares your GPS coordinates, your laptop could also reveal your location that way. In addition there is an entire industry selling personal information, but that is a long discussion.... I typically use a Hot Spot for my travel router then set the toggle switch to turn on or off the VPN. If you need to connect to public WiFi then you will need a second personal device to connect to 192.168.8.1 and login to the new WiFi. As far as the VPN, NordVPN is good but not all companies allow Commercial IP Addresses which is why the other video helps you setup your own Home VPN Server so you can use your actual Residential IP Address. If you are having problems it is likely caused by Port Forwarding issues and many ISP companies will help you with that step if you call them.
Have you upgraded to the latest firmware? NordVPN changed the username and password to Service Credentials so you need to upgrade and use the username and password on the NordVPN website labeled "service credentials"
@@justinreviewsandrepairs5246 I am currently traveling and looking to connect the router to a Hotel Wifi and the signal is getting majorly throttled (0.5MPS) but 100MPS when I use it without the router. Do you know how to solve this?
i’m stuck on “This client is starting, please wait” aspect of it (about 11 minutes in), is there something I’m doing wrong that’s causing it to delay so much?
Yes, it should take less than 1 minute. You can click View Log and email the errors to support@JustinPruett.com if you would like me to look. Be sure you are testing using a second network such as a Hot Spot since most ISP routers will not connect to themselves from the same network.
Thank you so much for this information. Can you still do it if your company has already put a VPN ( Cisco) on your computer? also what is the best procedure to get connected without my employer knowing if I wanted to travel outside of the US?
Yes, the router connects to the VPN and then your Company VPN connects as normal -- unless your company does not allow Public VPN Services. In that case, you can run your own VPN Service using this video as a guide: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html where your Home IP Address can be used from anywhere
So if i was using a work desktop and docker, i would connect the ethernet from the docker to the SLAT travel router and the travel router connects to the home (fios) router? Please correct me if im wrong
Yes, you could plug a cable into the Slate AX and the Slate AX would connect over the Internet through your FiOS to the Opal to establish a WireGuard ®️ connection. th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
What if NordVPN or any other paid VPN service gives you a blacklisted IP? What is a way we set this up with OpenVPN and have an IP that's in a specific location?
Many services allow you to rent an IP Address which should be higher quality, but you could just run your own server with your actual home IP Address: th-cam.com/video/LXbDg1v65Qs/w-d-xo.htmlsi=FDO2IeKMIxbTMWEf
@@justinreviewsandrepairs5246 I won't be able to set that up at home for a while since I am abroad so I need a reliable IP Address that is in Virginia and as much as possible guarantee that it's not and won't be blacklisted. Do you have any recommendation for this?
@@justinreviewsandrepairs5246 I need it now and I can't set up the one at home since I am abroad for a while. Do you have any recommendation for an IP Address in Virginia or DC that as much as possible guarantees it is not and won't be blacklisted?
I just purchased 1800 and waiting for your new updated video. I am thinking to buy static (dedicated) IP address. In addition I have two years membership with NordVPN. Waiting for your guidance. Appreciate it
Yes, but it does depend on whether or not your company allows it. If they don't allow NordVPN or some other VPN Service, then you can run your own VPN Server using this video th-cam.com/video/LXbDg1v65Qs/w-d-xo.html which will use your actual Home IP Address and should therefore be allowed.
In version 4 they renamed the Kill Switch feature and moved it to the Global Options menu on the VPN Dashboard: docs.gl-inet.com/router/en/4/faq/block_no_vpn_traffic/#how-to-let-all-data-go-through-vpn Please make sure "Block Non-VPN Traffic" is toggled on.
I’m not able to connect my client to my server. I’m using BerylAX for both. My client set up for wireguard reads “the client is starting, please wait…” any solution to this?
On that page if you click View Logs there will be some errors there. You can email those to support@JustinPruett.com or add a comment here if you would like me to look.
So my question is I have it set up and turned off my location from being shared as well Bluetooth and have it wired. The only one that’s still on is “"allow location override" which I believe my job does to change my location time on the desktop to theirs for us to use their program that has everyone on the same local time. ADP on the browser is the only thing that still has our current time when we clock in but everything else is on their location time. Will they still notice ? I feel the VPN router should still do it’s thing but I have to inquire just to be on the safe side.
They will be able to tell you are using NordVPN, which may be a problem for some companies, so always test before traveling. If you get a second router you can set one up to be a VPN Server then you can use your actual home IP Address anywhere: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
@@justinreviewsandrepairs5246 With just the one that I purchased I have been using it since I bought it. But they haven't mentioned anything about me using it and it's been about two weeks. Do you think that's because they know I'm actually still here in the US? So they don't care as long as I'm in the US?
Hello back again with some more questions, I am looking for GL.iNet GL-AXT1800 (Slate AX) Pocket-Sized Wi-Fi 6 Gigabit Travel Router, Extender/Repeater for Hotel&Public Network, VPN Client&Server, OpenWrt, Adguard Home, USB 3.0, Network Storage, TF Card Slot…which is the one you showed us, but I also see other version of it that have 1300, and 3000 as the number version are these the same ? Just want to confirm
The Amazon Affiliate Links are in the description to the exact product. There are many different options but I went with the Slate AX because of its performance, but the Beryl AX is also a great choice because it is a bit smaller and still has good performance.
Thank you, I do not have a dedicated IP to test with, but from their limited documentation it looks like you are assigned a specific server. So if you know which server that is, just download the OpenVPN configuration file and load it into the router Open VPN Client page. nordvpn.com/servers/tools/
I literally just spent 4 hours trying to figure out how to get it to work. Then I came upon this video and it helped me in 20 minutes!! Thanks!!!!
Glad it helped!
HOW when it COMES with a start guide ? ? ? like WTF
@@tw4943 Mine didnt COME with a start guide, and I was installing it while overseas.
4 hours 😂😂😂 special case huh buddy😂😂😂😂 some people are not meant to touch things
This is by far the easiest and most simple instructions I found for this! I watched multiple videos and this one helped me the most!! Thank you so much Justin!!!
Glad it helped! Thank you!
I bought this router, rented an Azure Ubuntu VM in Canada. Setup openvpn server, setup my router with openvpn client- my company doesn’t allow me to leave Canada.
I bought a plane ticket to Thailand, the vpn has been working while I’m in Canada - let’s see what happens when I go to Thailand. I think it’s gonna work 💯
That's great! When you get back you may want to consider installing WireGuard®️ instead for improved speeds!
Did it work and how's the speed? I'm also planning to travel out of Canada to that side of the world.
Any update on this? I just landed a remote job and also want to go back to Thailand and campout there while I work. How did your set up work?
any update?
too bad he is fired... the boss know it all 🤧
You're an amazing teacher, you just went straight to the point, and gave us step by step on how to connect it. Thanks for you maturity.
Thank you! I need to make an updated video for NordVPN since they have switched to using Service Credentials instead of your actual username and password. Your Service Credentials can be found on the NordVPN Website.
This is a great informative Video! Thank you for putting this together it was very helpful. I also like the layout of the video interesting to put the unboxing at the end. - Thanks again and hope to see more content.
Thank you! I am still figuring this all out, but I did make a new video that takes things a step further: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
Excellent tutorial! Thank you!
You’re the real MVP
FACTS…🐐
Thank you for this great information.
Thank you! I am going to use this on my next cruise!
Thank you Justin. Amazing content!!
Just used your affiliate links!! Thanks for the video!
Awesome! Thank you!
One important change since this video was recorded is that you need to upgrade the firmware and use the NordVPN Account Credentials from the NordVPN website instead of your actual username and password!
Will do!! The delivery should arrive tomorrow!!
Hey Justin, thanks for this video. Just a few quick questions that I haven’t seen asked in other comments:
1.) If I connect my Work Laptop AND other Personal Devices to the same flash router, will the Work Laptop be able to see and use information from the other devices on the network?
For example: if my Work Laptop is connected to the router and has it’s location services turned OFF… and my Personal iPhone is also connected to the same router with its location services turned ON… could the Work Laptop potentially use information from the iPhone to figure out it’s location?
If so, is there a way to mitigate this?
Would it make a difference to:
A.) Use 5G for Work laptop, 2.4G for Personal Devices…?
B.) Connect Work Laptop to router via Ethernet only and Personal Devices via WiFi only…?
C.) Or would you suggest to not connect any Personal Devices to the router AT ALL while the Work Laptop is connected to it…?
Would any of the above be overkill…?
------
2.) I noticed a setting in the Admin Panel that says “Block all Non-VPN Traffic”. My understanding is that if the router should lose the VPN connection at any time, it will stop supplying internet altogether. This is what I want. Can you confirm if this is correct?
------
3.) Is it necessary to run encrypted DNS with an active VPN? If I don’t, could my Work Laptop use DNS Server information to reveal its real location even while connected to VPN? I’ve been seeing online that encrypting your DNS while running a VPN simultaneously can cause leaks and issues. I followed your advice anyway and setup my DNS settings exactly the way you did in this video. I have not run into any issues. But just want to be proactive in making sure.
Thank you in advance 🙏
1. It's kind of an open secret that MANY companies are "secretly" selling your personal information all of the time, including your GPS coordinates. Android and iOS have prompts to allow Location access to apps, but there are apps that need it for a legitimate purpose and they secretly sell the data at the same time. This is how some websites know your precise location before you even give it to them. Instead of your IP Address location coming from ARIN (the registry) they bought precise data from a broker. In addition, if you login to the same account on your work and personal device, the location could be shared between devices. On windows and Google this is a helpful feature, unless you are trying to turn it off.
2. Yes, you want that enabled, it was on by default when I made the original video. I need to explain that toggle when I make the updated video. It also helps block some of the tricks used to reveal your location.
3. I just prefer using CloudFlare as my DNS provider.
Hey Justin, thanks for the quick reply.
For question 1, I’m more so curious if the client devices running off the Beryl Router can see and collect information from each other? (Assuming VPN is active).
I never sign in to any work stuff on my personal devices. But if I were to connect my iPhone/Laptop/etc… to the router while my work Laptop is also connected to it, would the Work Laptop be able to see and access information from those other devices on the router’s network?
------
For question 3, Cloudflare is fine but to your knowledge is there any chance that encrypting the DNS could cause the VPN to fail?
If I set the DNS Mode to Manual with Cloudflare instead of Encrypted with Cloudflare, will the Router’s Clients’ real locations still be shielded assuming VPN is active?
1. Yes, the Local IP Addresses and MAC Addresses will be visible to the other devices. This does not give your work device GPS access from your phone, but in a roundabout way it is possible as I described earlier through nefarious practices.
3. Not that I know of
This is so helpful - truly creating unique helpful content! Are you able to connect your computer to your work’s vpn with this method and still show your location in the US? Or would you need to use the method of your other video with both routers?
Thank you! Unfortunately it varies by company -- although in both videos your location could be the US, some companies actually check your IP Address to see if it is from the city you live in! So the other video works in more cases. If you already have a VPN account you could test this method first, otherwise the second router actually costs less than a VPN subscription anyways.
@@justinreviewsandrepairs5246 what should I do if I have not public static ip from my home
The IP does not have to be static, the DDNS will automatically update so the hostname can reflect your IP Address.
@justinreviewsandrepairs5246 if using two routers, do you still need vpn?
Hi Justin, is the Slate AX still the best router to use for this, or has something else been released since you made the video that's better/faster?
Yes, but if you want to save some money the Beryl AX is also very good.
This video just solved my current problem. Thanks! Question, I also have a Solis. It hit or miss in certain spots. Do you have any other one you recommend? It worked amazing in central america. Having issues with it in certain European countries.
Between the Solis and T-Mobile I usually have at least "dial-up" speeds for checking email. Many European countries have lots of free WiFi which is usually insecure, but not a problem once you add in the VPN from your travel router or from the VPN app on your phone such as nordvpn or windscribe.
Thank you this walkthrough; this was very helpful
I got the router using it as a repeater, installed Nord VPN on it, and the router is connecting fine to my cell phone and personal laptop. I attempted to connect to my work laptop (which has another VPN on it set up by the employer) it kept saying "Can't connect to this network." I tried resetting the router, but nothing happened. What could be the problem? and how to resolve it? Thanks in advance!
If the VPN is working, then it could be your Employer is blocking the Commercial VPN Service. In that case you will have to run your own VPN which uses your actual Home IP Address: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
@@justinreviewsandrepairs5246 Thank you!
This seriously is a wonderful tutorial and I love your knowledge and process here. You explain everything really well.
I was curious about a handful of things
1) Can you apply your own device VPN (Say work VPN) on top of this?
2) Can you have a killswitch that prevents the Travel Router device from connecting to internet unless it has that VPN (through dallas) set up?
3) How does the 30 mbps do for having video zoom calls for work?
4) If I am not mistaken the process is (wifi locally -> travel router -> vpn -> $$$) and your local laptop or phone connects to the travel route (but the local wifi powers the travel routers internet, and is obfuscated by vpn).
Thanks you!
1. Yes, but your company might have restrictions on the type of IP Address you are using. Most VPN services will provide a Commercial IP Address, if you need a Residential IP Address you typically have to pay more OR you can run the VPN Server yourself from home using this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
2. Yes, from the Global VPN Settings page you can toggle "Block non-VPN traffic"
3. This is actually a complicated topic, your video quality will be dependent on Download, Upload, and Latency. If you go to another country, try to get on Fiber Optic Internet to reduce your latency. 30mbps is fine, but the latency will cause lag if it is too high.
4. I can't read number 4 from the app, will add another comment
4. Yes, you can run a VPN on the travel router and then your laptop can run a VPN as normal so you basically have a double VPN.
@@justinreviewsandrepairs5246 what if the residentiel router got powered off 🇨🇦, will my pc get connected to the residentiel router (abroad)🇹🇭 or connection will just be dropped until the 🇨🇦 router get powered on
You can select either option you prefer from the VPN Options. It is called "Block Non-VPN Traffic" and I prefer to leave mine on for added security.
@@justinreviewsandrepairs5246 Or ⬇️
On the left side of web Admin Panel -> VPN -> Internet Kill Switch
This feature is make sure the devices connected to the router always access the Internet via VPN.
I’m trying to connect a Flint router at my brother’s house directly to his internet service provider, and trying to set the Beryl AX along with my sister who is in the DR. I set up the dynamic DNS and downloaded the client QR codes for her Beryl AX router and another one for mine. She has connected hers to the internet modem at home and set everything up on the Beryl AX but the light is not turning from orange to Green establishing the connection to the Flint here at my brother’s. We need help 😞
You say directly, but some cable modems are also a router so you would have to set it to bridge mode or do Port Forwarding. Feel free to send me your error log from the Client Travel Router to support@JustinPruett.com
Thanks for the walk through!
Thank you for watching! Be sure to checkout the other video too th-cam.com/video/LXbDg1v65Qs/w-d-xo.html let me know if you run into any problems!
Hi Justin, thank you for the video, it's really helpful.
I just had a question would really appreciate your insight on this.
So I am basically using a personal computer for work and my company had WireGuard installed as the VPN and the remote desktop.
Would I need to use this method, or could I just install another commercial VPN on my device such as Nord, Express, ect. and run it together with WireGuard, would that work as well if I plan on traveling internationally?
Probably not, the software isn't setup to run two VPNs on a single computer. Using the router allows you to run a VPN on the router and another on your computer.
If you want to appear from working at home you should set up your home as a VPN server and VPN into it.
You are right, you can see how to do that using 2 routers in this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
If you set your home up as a vpn server can anyone connect to it with out your permission or is it guarded some how with passwords were only ppl with login can access that vpn u created with home adress?
What would be the best affordable setup to do this in 2024? Brume 2 and Slate AX?
It depends on what sales or coupons are available but typically two Beryl AX are the cheap and easy option. The Brume 2 is a little harder to set up without WiFi but is a good option for home.
The VPN setup in this video did not work of me. I entered my Nord VPN credentials directly into the router admin page as you showed in the video and it wouldn't connect. I had to log on to the Nord VPN website and then click on the manual setup option on the website and then I was emailed a one time User ID and Password and then it finally worked.
You wonderful person you!!!! I would kiss your feet if you were near me. You don't understand how long I have been trying to set this up with no success. I did what you stated above with the manual setup and it worked!!! Thank you so much!!!! ❤️🥰
So how do only need one router instead of two like your other video states? I work on a locked computer meaning i cant mess with any settings, so the router i use has to be setup so that all i have to do is plus in a ethernet and work away. If what im seeing is correct, then i only need to buy this one router, use my laptop to set it up, and then I can take it anywhere with me, plug into my work computer, and it will look like i working from home? Or is that the video with two routers? Thank you for the vids... Im just really slow with tech stuff.
There are two different methods because in this video we are using a Commercial VPN Service which is blocked by some employers. In the video with 2 routers you are running the VPN Service which is not blocked by employers. If your employer allows Commercial VPNs, this is the easier method. In either case you are not modifying your work device or the remote Internet. When you run your own Server on your own home Internet you simply open a single port to allow the Client to connect remotely.
I’m looking for the advanced setup. Do you have a video for it? I have two slate atx-1800 and wanted to use one when I travel to connect to one set up at home that is repeating. Have watching this video a couple times and still stuck
This is the video with 2 routers: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
I followed your steps, when I Enable OpenVPN client ..I get this message" The client is starting, please wait…" but it never connects and it also disconnects me from internet.. Any idea why its not connecting?
Sorry, this video is due for an update. NordVPN changed the way you login, you need to use your Service Credentials now instead of the account username and password. In addition, you must update the travel router to the latest firmware. In some cases you may need to factory reset the travel router after upgrading the firmware to wipe the previous account credentials from the memory.
Yes i am having this same issue right now when using wireguard can i send you an email please ?
Can i plug this router into another router and it will work the dame way if i use a ethernet from this? Or would i have to connect this router via wifi to the main router and then connect my ethernet to this router? I cannot turn off the main router at the remote location so whatever i use has to work off of that. I cannot change and setting on the main router that this would plug into. Im guessing im screwed.
You can connect the Travel Router to Internet via WiFi or through the WAN port without changing settings on the remote Internet connection.
Hi Justin, with my company laptop the location services is locked by admin and is always set to on.
Would I need to set up my commercial VPN on my router all the time whenever I want to connect it to a WiFi? Or is it automatic (ie: when I connect my router via repeater when traveling to a new place, it will automatically be connected to VPN)?
I’m worried that by logging in on my work laptop and connecting via repeater as my first step, will give my location away.
This is assuming that I can’t connect my router via LAN cable
You should use a personal device such as a cell phone to connect the Internet at a new place. Also be sure to turn back on "Block Non-VPN Traffic" after connecting the first time.
Great video and thank you so much for doing it quick question when you connect the device do you connect it with your own personal laptop or work laptop
Thank you, for the initial setup you should use a personal device such as a laptop, phone, or tablet. After that you only need to use a personal device again to connect to any new WiFi networks such as a Hotel. Personally, I use my phone Hot Spot so the router just reconnects to that automatically.
If your question is more about if this works with work devices, the answer is it varies by company. There are two videos on this channel, one for using a Commercial VPN provider such as NordVPN and the other is where you run your own server so you can use your actual Home IP Address. If allowed, the Commercial VPN provider typically provides the best speeds, but running your own server provides better ambiguity of your actual location.
Keep in mind that if your work device has GPS or Cellular antennas, you will need to do more work to mask your location. That is not common though.
Justin you are doing god’s work. Can a company know where i am even if i use this method, on a company issued device? Can i do this with a device my company gave me?
If the device has GPS or Cell Phone tracking, then Yes. Most don't. As far as methods, this video uses a commercial VPN which uses a data center grade Address. The other method is better because you use your Residential IP Address: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
So helpful 💯🙏🏼
Hi Justin. I have a question please. I dont need to have my IP home address because I am allowed to travel within Europe and work from Europe. But if I want to go further and I will tell my boss I'm in Spain by example, when I'm connected to a Spain server via VPN will the ISP be shown as being from Spain too or it will show the real ISP where I'm actually located (the IT department will ve receiving traffic from my actual country I'm in).
Is there other way that they can see I am not in Spain if I do all this trick?
Appreciate your answer. Thanks a lot.
Hi George, if you choose a VPN in Spain it should be located in Spain, but that is ultimately managed by your VPN service. If your device has GPS you might want to turn that off and be mindful of your background on any video calls.
After watching this video…I understood that you do not need to be home to set this up and if you already are travelling you can make this happen even if you left the country ? because I already left my home country and I am trying to use this to bypass my work VPN…and make it look like I am still in the same country..please let me know..thank you once again
Yes, you can make it look like any country your VPN provider has and you can set up now
"The interface is connected, but the Internet can't be accessed"
I keep great this error message whenever i connect to any wifi with my travel slate ax router. I was able to connect my mobile hotspot to the travel router but its extremely slow. I even tried using wired connection on the travel router. It connects but the wire guard doesn't connect so I can't use the wifi from the travel router.
Do you happen to have Xfinity as a cable Internet provider?
@@justinreviewsandrepairs5246 yes i have xfinity internet
Hey Justin! When traveling and using a home IP address, will my computer automatically adapt its date/time to what it is at the home location?
It depends on the settings of the computer, but you can set the time zone on the router if your computer is configured to get it from the router: docs.gl-inet.com/router/en/4/interface_guide/time_zone/
Will I still be able to use my employers VPN installed on my work laptop in addition to the VPN through my travel router which would mask my location? Or is it either or?
Yes! Because the router is running its own VPN you can continue to use your laptop as normal. Some employers don't allow commercial VPN service IP Addresses, in that case you may need to run your own: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
It’s me again asking the same question !!! Can I use this to by pass the VPN installed in my work computer ? It’s a work computer and I don’t have administrative rights, so only IT can make change to my computer..so I am wondering if I were to type the ip address on my work computer will it block me from access the online setting for this device! Patiently waiting on these answers ! 😊
Yes, the VPN service is on the router so no changes to the computer or necessary besides plugging in a cable or connecting to the WIFI. You can access the GL.inet dashboard using your phone.
Hi Justin, thanks for the amazing video. Does Zscaler act as a gps for the “boss” to find out if I am working outside the country?
That zscaler app has full access to your phone, they might be able to see what cell tower you are connected to even without GPS. They could also see what WiFi networks are around you and determine your location that way as well. As for the actual connection since you are using a travel router that does the VPN connection they would not actually see the VPN from your phone but because that app has full access they can guess based on the networks in your vicinity. I wouldn't risk it but I would also look for a new job...
@@justinreviewsandrepairs5246 thanks for the response. Zscaler is actually on the laptop and not on the mobile. I assume the response is not the same?
Hello! This was very informative thank you. I was wondering once I connect to the gl router and vpn like you showed do I still log into my company’s vpn that’s already on my laptop when I sign in or do I just not log into that?
Btw my company uses globalprotect
Yes, many people use this method so they can securely connect to their company VPN while abroad. Some companies don't allow NordVPN, and in those cases you can simply run your own VPN Server with a second router: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
Hi Justin, thanks for the video it’s very informative, but for some reason the VPN doesn’t connect for me, it just stays in “The client is starting, please wait” after I choose a server. Any idea what the problem could be?
NordVPN changed the way you login to use "Service Credentials" from your NordVPN dashboard instead of the usual Username and password. If that does not help, please click View Log on the VPN Client page and email me the errors to support@JustinPruett.com
Hi Justin, thanks for the useful information. If I had a Flint and a Slate AX, do I have to connect the Flint to another router, or could the Flint be the one and only router (connected directly to the Modem) at home and have the Slate AX be the travel router?
The Flint can be the only router, you can skip the Port Forwarding step in this case. Let me know if you have any questions or problems.
Hello, what should I do when a hotel's Wi-Fi brings up a login page after connecting? Thanks.
This is called a Captive Portal and you have 2 ways to get your router past that page: th-cam.com/video/46nG8mhm5og/w-d-xo.html
@@justinreviewsandrepairs5246 Great content. It really helped me a lot. Thank You.
Quick question: when you configure the client vpn through NordVPN, how does it obtain local dns?
In addition, what is the difference between client and server configuration for the vpn?
Like if we purchase dedicated static IP address in Dallas, that will be considered as server configuration?
That would be great if you could share the training video. You are the best
While connected to the VPN you would be using their DNS server unless overridden from your device. While off the VPN the travel router has a DNS settings page you can configure.
If you purchase a dedicated server IP Address you will need to select the server they assigned to you using the manual OpenVPN configuration
I could use your help not sure what I’m doing wrong
NordVPN has changed a bit to where you will need to use Service Credentials from the NordVPN dashboard instead of the regular username and password. You can reach me at support@JustinPruett.com
@@justinreviewsandrepairs5246
I know this might be a lot of work, but could you give me step-by-step instructions? I’m trying to figure out if I connect to my home Wi-Fi first then I connect to the GL Wi-Fi after I sign into it I am still having issues
Will this work from Toronto, Canada? If I keep the router in Canada and can travel outside of Canada?
Yes, unless the country you are visiting blocks VPNs, such as China.
Hi Justin, would this work if the company VPN being used is WireGuard? Could it run alongside the travel router's built in VPN?
Correct, the VPN is on the router so you can still run another VPN on your computer.
@@justinreviewsandrepairs5246 Thank you Justin. And it would still mask my location to the one I set using the Travel Router?
I got Not Found on the top when I do the VPN client set up step, Can you help ?
Please email me a screenshot of the problem you are seeing: support@JustinPruett.com
First I want to say thank you for making this video, Justin! Although I am still confused, I think once I watch it a few more times I will get the hang of it.
Just to confirm, this method will allow me to connect to my home vpn when I am abroad? As in, if the IT team checks my IP it will display the one from my home? To access certain documents in my company I have to briefly switch to an internal VPN, will this switch reveal my true IP address?
(Btw do you do online consultation sessions 😅)
This is not the Home VPN video, this video uses a commercial VPN provider for when your employer only requires your IP Address to be from a certain location.
If you want to use your actual Home IP Address, see this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
Running a VPN from home allows you to use your actual home IP Address instead of a commercial VPN IP Address.
Thank you so much, Justin!
Hi I wonder how is this different from me connecting public WiFi and turn my vpn service on? Thank you so much!
In this case the VPN is run by the router so you can run an additional VPN on your laptop.
Can you add express vpn or you have to use Nord vpn?
You can use any VPN service that supports OpenVPN or WireGuard ®️. I believe that includes Express VPN.
Thank you so much!!!
Thank you for watching! 😊
Will I be able to use this with a WFH job with a tower and 2 monitors? How would I use this to still travel and have my computer still connected as if I'm still working from home? I have so many questions and need your help.
The VPN is on the router so you can obscure your IP Address location. This other video shows how to use your actual Home IP Address abroad: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
There is another video for portable monitors if you need to travel with them.
Here is the video about a portable monitor: th-cam.com/video/hLND92axXd8/w-d-xo.html
@@justinreviewsandrepairs5246 I watched the video I'm not sure if I can use portal monitors I'm okay with traveling with on they gave me I just want to make sure they don't know where I'm at when I'm working the company is Alorica.
Hey Justin! Thanks for creating this content. I have a NordVPN account, connected successfully. However, when I attempt to connect to OpenVPN it sits in "The client is starting, please wait..." Any idea why I'm unable to connect?
Thank you! I have had that happen to me as well, try turning off the VPN, then rebooting, then turn it back on.
I think GL.iNet needs to fix that bug.
@@justinreviewsandrepairs5246 Very quick to respond, much appreciated! I'll give it another go :)
@@justinreviewsandrepairs5246 Not having any luck. I also reset firmware and started everything from scratch. Do you happen to have any other suggestions?
Did you try TCP instead of UDP? You can send the logs to work@justinpruett.com if you would like me to take a look.
Amazing video
Can I hook it up for my android fone to call and receive calls if I go to another country
Yes, if your phone and service support WiFi Calling
Maybe I’m confused but the computer isn’t connecting to a VPN - but the router is? And then your device just looks like it’s on a regular Dallas Connection? My IT department can detect when someone has a VPN on their device but this might be different I’m not dure
Correct, the Router is connecting to a VPN so there is no software to install on your computer. If your company does not allow Commercial VPN Providers then you will need to run your own: th-cam.com/video/LXbDg1v65Qs/w-d-xo.htmlsi=zd5kBA5uxHeQTqUZ
Does the router support more than one vpn profile?
Let’s say I have two devices and each one should “be connected“ from a different location . Coil I just create two profiles , set each one on a different location and connect individually to them?
Yes, you can set multiple profiles.
Thanks bro
Thank you! Let me know if you run into any problems.
Hey Justin! Super helpful video but I can't see to get the connection with nordvpn to work. It keeps saying please wait for connection to start but never does and I've tried multiple different servers
Sorry, this video is due for an update. NordVPN changed the way you login, you need to use your Service Credentials now instead of the account username and password. In addition, you must update the travel router to the latest firmware. In some cases you may need to factory reset the travel router after upgrading the firmware to wipe the previous account credentials from the memory.
Thank you for this. I followed all the instructions however once I enable the vpn its stuck on " the client is starting , please wait " .. I tried it yesterday and today. I also changed locations and still nothing. Am I missing something?
Have you upgraded the firmware? A firmware update is required, but there is also a bug when upgrading the firmware where sometimes things don't get reset properly. Please reset the device then try again.
Also keep in mind you have to use the access credentials from NordVPN, you can't use your regular username and password anymore. I will need to make an update for this video.
Sorry for the confusion! Feel free to email me at support@JustinPruett.com if you still have problems.
Would you please advise the cheaper one just to serve the purpose of changing location please
Yes, the Opal is good for basic web browsing but if you want to do streaming video then the Slate AX is worth the money.
I cant seem to get my vpn client to connect on the slate ax. How can i fix this
NordVPN uses Service Credentials instead of the usual Username and password now. You can find these Service Credentials in your NordVPN Dashboard.
Once I connect this travel router using Wi-Fi (which is the repeater option) Can I get wired Ethernet connection by connecting a Ethernet cord to the router then to my desktop?
With or without VPN? With VPN yes, without will vary based on the other hardware: forum.gl-inet.com/t/axt1800-as-a-wifi-to-ethernet-bridge-possible/29623
Hello, great videos. Can I set-up ATX-1800 that I want to use as my Wireguard VPN Server BEHIND my Verizon FIOS router (meaning on a LAN port on the Verizon Router) and leave the WAN port connected to the WAN port of the Verizon router As long as I do port forwarding on the Verizon router? I would prefer not to connect the ATX-1800 directly to the WAN port from the Internet box. Thanks
Hi, thank you, yes! My Frontier service was bought from Verizon so the setup should be similar to the video but here is another video that shows how to see which IP Address you are forwarding to: th-cam.com/video/LzBa6KsfG9A/w-d-xo.html
Thank you for doing this. I am following your instructions but am getting stuck at switching over to GL-AXT1800 from my internet. It's not connecting. Can you assist with troubleshooting what the problem could be? Thank you.
Which part is not connecting? Your computer is not connecting to the Slate AX or the Slate AX is not connecting to your Internet?
After adding nord vpn, I’m losing internet. What should I do?
NordVPN changed the login to be the "Service Credentials" in your NordVPN dashboard instead of the usual login.
Hi :) My Router showing via LAN not my VPN Location. With WLAN it’s working just fine
Did is miss something in the settings?
There are 3 ports on the Slate AX, two of which are LAN and one is a WAN port for connecting to the Internet. Are you plugged into the LAN port or the WAN port (Should be LAN)? Does the dashboard on the GLiNet router show a Green Dot indicating that the VPN is connected?
@@justinreviewsandrepairs5246 Thank you so much foe the Reply! It is connected to LAN and the router is with a Green Dot indicating that the VPN is connected. Via Wifi its working just fine
Hi Justin
I bought slate atx 1800 to use it during my travel . How do I go about connecting to hotel WiFi ? As I need to enter login and password . How do I go about setting it up . Can you help ?
Thanks
Many hotels use something called a Captive Portal. Before turning on your work laptop you should use another device such as a phone to get the travel router connected to the Internet. Connecting to the Captive Portal requires turning off the VPN temporarily to login to the hotel portal: docs.gl-inet.com/router/en/4/faq/connect_to_a_hotspot_with_captive_portal/
Can I do this if I have already left the u s ad need to set it up in Mexico to show I’m in the states ?
You can use a commercial VPN provider with an IP Address based in the United States. NordVPN and WindScribe both work well.
Hey Justin, how would you set up one router as a server and another router to connect to it?
Hello, checkout this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
thanks for the video sir
Thank you!
Will this internet traffic still be visible to an employer as obvious VPN traffic? Is that where a site to site VPN is needed (one of your other videos)?
Yes, unless you specifically purchase a residential IP Address from the service provider the IP Address will be identified as a Commercial IP Address which would be obvious. If you are curious how an IP Address is registered, you can search for the IP Address on ARIN: search.arin.net/
This is why many people use the other video to use their actual home IP Address.
Hi Justin, great video. Got myself one and with your link I signed up for NordVPN. I can’t seem to get the vpn client connection started. It just stays on “the client is starting, please wait…” yellow tab. Any ideas how to troubleshoot? I’ve rebooted and reset the firmware and no luck
Thank you, the process has changed a bit since this video was made, you have to use the credentials from the NordVPN website called "Service Credentials" instead of the usual username and password. There is also a bug in the firmware caused by this change, you will need to upgrade to the latest firmware then do a factory reset to prepare the router for the new "Service Credentials"
Let me know if that still does not work.
Thank you,
Justin
Hi is okay if you dont have a power bank and have to plug it into the wall.
Absolutely, it comes with a wall plug. It is a very versatile router since it has USB C
@@justinreviewsandrepairs5246 is it possible that I can contact you for help setting the router up this is my first time working a WFH and I'm not sure how to set the router up
@@justinreviewsandrepairs5246
Heyyy I thought I replied back to you but I wanted to ask if its possible if I can contact you for your help on how to set up my router and how to use it for my WFH monitors.
Im not smart but so i just need to config vpn to connect to vpn server in Dallas? Then once plug or connect to internet in Tokyo? It think Im working in Dallas is that how it works?
Yes, your IP Address would be based out of Dallas in this example. You can choose any location your VPN provides. One important note is that this does not change your GPS location, so if your work tracks you via GPS you will need to solve that problem as well.
@@justinreviewsandrepairs5246 gps or privacy location of my laptop is locked by work, this travel router it will not help me 😥
Hey Justine I followed all the steps but for the past two days the nordvpn is still starting “the client is starting please wait…..” is there something I’m doing wrong
Did it work before? If yes, try turning the VPN off then back on. If not, let's investigate the logs.
@@justinreviewsandrepairs5246
Yeah I have turned off the nordvpn on and off and even rebooted the router still the same issue. Can I please give you my email to reach me there please I really need help setting this router up please
Yes you can email work@justinpruett.com
@@justinreviewsandrepairs5246
Hey Justin please check the email I sent it
I got your email, I will try to reply in about 18 hours after sleep and work. I will try connecting to the same server you sent and see what errors I get.
does this actually hide your IP address in asia and show in Canada / usa?
Yes, but if you prefer to use your actual Home IP Address then checkout this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
Hi great video and clear instructions. Can the ISP of the VPN location be obfuscated or customized as a local carrier instead of the default shown ISP when converting the IP address and get its location and ISP and ASN searchable number? Thanks
Thank you! If you want to use your actual Home IP Address you will need to leave a second router at home that shares the Internet through WireGuard ®️ or OpenVPN to the travel router you take with you. Please see this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
@@justinreviewsandrepairs5246 PROTECT THIS MAN AT AML COST !!! Sending you positive energy and more growth with your videos and channel !!!!
any advice for faster connection speeds ? other than disconnecting the vpn bc obviously i need that part .. im nervous wifi out the country wont be able to withstand the work i do
I usually pick a hotel that has WiFi, but I also have T-Mobile so I can pay for International Data if it is not fast enough. Many cell phone companies have International data available for an additional fee. In some countries, such as Japan, you can rent a WiFi hotspot that usually has pretty good speeds. In other countries with limited infrastructure you may need to buy or rent Starlink service. Hope that helps!
Hi Justin, I was testing this at a hotel, but I was getting "Subnet conflicts. Please change LAN IP address. Set LAN IP" when I try to connect to the hotel wifi. What would cause this? Now I was using a mini router. I plan to buy the one in your video when I get home through your link. Thanks.
I have not used that model, but did you have the IP Address set to manual? It kind of sounds like DHCP did not negotiate with the hotel router. It could also be the Hotel requires you to login or accept terms of service. In that case it gets more complicated but you would accept the terms with your phone then have the travel router use your phones Mac address.
Hi Justin, is the setting up of the router (going to the web portal to set up the router) done on a personal laptop or a work laptop? My understanding is that you were setting it up on your personal PC
You should probably setup using a personal device so there is no trace. The work laptop would connect to the new WiFi and be good to go.
Would they be able to check my location through the WIFI I’ll be connecting with through VPN? I heard that they can also track location through wifi. Thanks!
Would this still work if we have to connect to the company vpn after we establish the vpn tunnel between the two routers ?
You may be referring to this video: th-cam.com/video/LXbDg1v65Qs/w-d-xo.htmlsi=FDO2IeKMIxbTMWEf and the answer is Yes. The router connects to one VPN and then your work computer can connect to another VPN.
Question so im using it everything works find except one program when im in dallas i use my normal internet and my calling software works perfectly fine, but when i use the slate ax it has an error message on the software every 3 min and i have to refresh my window for it can keep working any help on that ??please because i work as customer service rep ….
Are you using NordVPN? They offer many different servers so I would start by selecting a different server, if that does not work I would make sure the signal strength is good. If that still doesn't work you might want to reach out to GL.iNet directly to troubleshoot further.
Another option might be to try a different VPN provider completely, besides NordVPN I also like WindScribe
I tried to follow your other video where I got an opal and slate router to use my home IP address but I could never get it to work.
I then went on to follow this video with just the slate router because it seemed easier. I'm still stuck.
I set up the slate router on my private PC and set the location to another US city(miami) to see if it would work. On the gli net admin page it did work as you said and my IP address changed. I checked my weather app to see if the location changed and it showed the weather for my current location, not miami. To me this indicated that the VPN did not change my location info just my IP address. any help regarding this?
My biggest issue is I thought once I set everything up on my personal pcp that I could just connect to the gl-atx wifi and be good to go because my work laptop has blocked my ability to go to the 168... webpage to access the gli net admin panel. Also when I check my weather(location) on my work laptop it was my current location not miami. I will also note that once i connect to wifi on my work laptop i have to connect to the VPN already placed there by my job before i can access the internet. I am looking for the workaround that allows me to just connect my work laptop to a wifi without any further steps on that computer
I am really concerned because I am traveling out of the country and my work laptop will not work on a wifi that is not a domestic IP address.
Can you please help. I have been working on this issue for weeks and have sent many messages. As stated before i am willing to pay for your time because after buying 3 different routers, getting a nordvpn subscription and also getting a goodcloud and zerotier account i am still not accomplishing my goal.
Hello, both videos cover changing your IP Address to another location, but weather apps will use your GPS coordinates which are not altered by changing your IP Address.
If you sign into any app on both your laptop and phone that shares your GPS coordinates, your laptop could also reveal your location that way. In addition there is an entire industry selling personal information, but that is a long discussion....
I typically use a Hot Spot for my travel router then set the toggle switch to turn on or off the VPN. If you need to connect to public WiFi then you will need a second personal device to connect to 192.168.8.1 and login to the new WiFi.
As far as the VPN, NordVPN is good but not all companies allow Commercial IP Addresses which is why the other video helps you setup your own Home VPN Server so you can use your actual Residential IP Address. If you are having problems it is likely caused by Port Forwarding issues and many ISP companies will help you with that step if you call them.
For the Nord VPN part do you need a Nord Subscription to set it up?
Yes, and you will use the Service Credentials instead of your account credentials. You can find them on your Nord Dashboard
Thank you! When I try to connect to the VPN it gets stuck in “the client is starting, please wait…” any reasons why this may be?
Have you upgraded to the latest firmware? NordVPN changed the username and password to Service Credentials so you need to upgrade and use the username and password on the NordVPN website labeled "service credentials"
That did the trick! Thank you so so much!!!
@@justinreviewsandrepairs5246 I am currently traveling and looking to connect the router to a Hotel Wifi and the signal is getting majorly throttled (0.5MPS) but 100MPS when I use it without the router. Do you know how to solve this?
Hi Will this only work with Nord vpn? I see they only have servers in Miami, could I use surfshark for Orlando or Tampa?
You can use any VPN provider that supports OpenVPN or WireGuard®️, including SurfShark.
i’m stuck on “This client is starting, please wait” aspect of it (about 11 minutes in), is there something I’m doing wrong that’s causing it to delay so much?
Yes, it should take less than 1 minute. You can click View Log and email the errors to support@JustinPruett.com if you would like me to look. Be sure you are testing using a second network such as a Hot Spot since most ISP routers will not connect to themselves from the same network.
Thank you so much for this information. Can you still do it if your company has already put a VPN ( Cisco) on your computer? also what is the best procedure to get connected without my employer knowing if I wanted to travel outside of the US?
Yes, the router connects to the VPN and then your Company VPN connects as normal -- unless your company does not allow Public VPN Services. In that case, you can run your own VPN Service using this video as a guide: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html where your Home IP Address can be used from anywhere
Do you have an email address so I can email you please?
Also if we set this VPN up can we still sign in to our company installed VPN to have access to our work or no ?
In the instructions, does it detail the max size of the micro SD card that can be used please?
Yes, 512GB www.gl-inet.com/products/gl-axt1800/#:~:text=The%20device%20comes%20with%20a,that%20supports%20up%20to%20512GB.
So if i was using a work desktop and docker, i would connect the ethernet from the docker to the SLAT travel router and the travel router connects to the home (fios) router? Please correct me if im wrong
Yes, you could plug a cable into the Slate AX and the Slate AX would connect over the Internet through your FiOS to the Opal to establish a WireGuard ®️ connection. th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
What if NordVPN or any other paid VPN service gives you a blacklisted IP? What is a way we set this up with OpenVPN and have an IP that's in a specific location?
Many services allow you to rent an IP Address which should be higher quality, but you could just run your own server with your actual home IP Address: th-cam.com/video/LXbDg1v65Qs/w-d-xo.htmlsi=FDO2IeKMIxbTMWEf
@@justinreviewsandrepairs5246 I won't be able to set that up at home for a while since I am abroad so I need a reliable IP Address that is in Virginia and as much as possible guarantee that it's not and won't be blacklisted. Do you have any recommendation for this?
@@justinreviewsandrepairs5246 I need it now and I can't set up the one at home since I am abroad for a while. Do you have any recommendation for an IP Address in Virginia or DC that as much as possible guarantees it is not and won't be blacklisted?
I have only used WindScribe which offers Residential IP Addresses in Dallas and Canada
Can you more tutorial videos for this device? Like step by step installation and configuration the vpn
Yes, this video needs an update since NordVPN has changed a bit and there is new firmware. Which VPN provider did you want to use with this router?
I just purchased 1800 and waiting for your new updated video.
I am thinking to buy static (dedicated) IP address. In addition I have two years membership with NordVPN.
Waiting for your guidance. Appreciate it
Thanks for the informative video! Would I be able to connect to my company’s VPN if I’m connecting through this router?
Yes, but it does depend on whether or not your company allows it. If they don't allow NordVPN or some other VPN Service, then you can run your own VPN Server using this video th-cam.com/video/LXbDg1v65Qs/w-d-xo.html which will use your actual Home IP Address and should therefore be allowed.
Hi Justin! Thank you for this amazing video. How would I install a killswitch?
In version 4 they renamed the Kill Switch feature and moved it to the Global Options menu on the VPN Dashboard: docs.gl-inet.com/router/en/4/faq/block_no_vpn_traffic/#how-to-let-all-data-go-through-vpn
Please make sure "Block Non-VPN Traffic" is toggled on.
Thank you so much!
I’m not able to connect my client to my server. I’m using BerylAX for both. My client set up for wireguard reads “the client is starting, please wait…” any solution to this?
On that page if you click View Logs there will be some errors there. You can email those to support@JustinPruett.com or add a comment here if you would like me to look.
So my question is I have it set up and turned off my location from being shared as well Bluetooth and have it wired. The only one that’s still on is “"allow location override" which I believe my job does to change my location time on the desktop to theirs for us to use their program that has everyone on the same local time. ADP on the browser is the only thing that still has our current time when we clock in but everything else is on their location time. Will they still notice ? I feel the VPN router should still do it’s thing but I have to inquire just to be on the safe side.
They will be able to tell you are using NordVPN, which may be a problem for some companies, so always test before traveling. If you get a second router you can set one up to be a VPN Server then you can use your actual home IP Address anywhere: th-cam.com/video/LXbDg1v65Qs/w-d-xo.html
@@justinreviewsandrepairs5246 With just the one that I purchased I have been using it since I bought it. But they haven't mentioned anything about me using it and it's been about two weeks. Do you think that's because they know I'm actually still here in the US? So they don't care as long as I'm in the US?
Hello back again with some more questions, I am looking for
GL.iNet GL-AXT1800 (Slate AX) Pocket-Sized Wi-Fi 6 Gigabit Travel Router, Extender/Repeater for Hotel&Public Network, VPN Client&Server, OpenWrt, Adguard Home, USB 3.0, Network Storage, TF Card Slot…which is the one you showed us, but I also see other version of it that have 1300, and 3000 as the number version are these the same ? Just want to confirm
The Amazon Affiliate Links are in the description to the exact product. There are many different options but I went with the Slate AX because of its performance, but the Beryl AX is also a great choice because it is a bit smaller and still has good performance.
I have a dedicated IP with NordVPN. How can I set that up? Any ideas? Great video btw!
Thank you, I do not have a dedicated IP to test with, but from their limited documentation it looks like you are assigned a specific server. So if you know which server that is, just download the OpenVPN configuration file and load it into the router Open VPN Client page.
nordvpn.com/servers/tools/
If my company already uses a vpn, how do I set this up?
The router connects to the VPN first at the location you choose then your computer can connect to the work VPN as normal.