ฝัง
- เผยแพร่เมื่อ 8 พ.ค. 2024
- In this video, I show you how to remove broken filament from your 3D printer extruder in a few simple steps. So don't panic, watch this video and relax!
*** Get the Anet A8 here
Amazon:
amzn.to/2E9gEZa
Gearbest:
www.gearbest.com/3d-printers-...
*** Thingiverse Links
Anet A8 Extruder Fan Hinge (check the remixes if you need one that holds your probe, too)
www.thingiverse.com/thing:229...
THE PRINTERS I USE: kit.co/danielcrosslink/the-3d...
MY MERCH: crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - DANIEL@CROSSLINK.IO
FOLLOW ME:
INSTAGRAM - / danielcrosslink
TWITTER - / danielcrosslink
FACEBOOK - / danielcrosslink
WEBSITE: crosslink.io
The Music I use: crosslink.io/es, AMAZING for TH-camrs!
GEAR USED
kit.co/danielcrosslink/my-vid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
1:12
Thank you very much. although we dont have the same printer, not even remotely. there were enough tips that i solved my issue and im back up and printing again. i just heated the nozzel 20 degrees hotter then required and pushed it through with a new chunk of filament after changing to a new nozzel.
Hi Daniel, is there an arduino code that pull back the filament out at the end of the printing? it can easily solve the problem of filament being stuck in the extruder
Thank you very much it helped me a lot.
Thank you very much....Very simple and helping information
Thank you! I used the Alan key and it came right out!
Excellent!
Helped me! Thank you.
Glad to hear!
Other videos: Use this weird metal thing that you will have to buy
This video: Use this tool you already have!
Thanks! Great info.
The fan hinge upgrade is an interesting looking add on.
The video about it is going to be published next Tuesday 😁
@@Crosslink3D thanks I actually printed it last night and was worried about the contact, so disassembled it, good video, I'm not going to able to do the tatara upgrade but let me know in advance when you are going to do the video
Yes, thanks for telling me, I am ordering one this month, video will be delayed because I need to do a few other mod videos first. Then I am going for the shootout with the original A8 😁
@@Crosslink3D what do you know about pla in the freezer
Not yet tried it out but I read a lot of things that it's quite stable even in the freezer. Maybe worth some investigation. Any experiences from your end?
Oh sir. This is almost answering my question.
In my case (bowden), the extruder is separated from the hotend and the broken filament is inside the connecting teflon hosepipe.
How can I solve this then?
Just suscribed btw. I see the videos and seems i'll be visiting this channel quite often.
I tried similar to this to clear the jam myself before seeing this and went back and tried again; however, it will not feed down. The nozzle is clean so that isn't why. If you have any suggestions I would love to hear them.
i can only imagine that your nozzle and throat are somewhat having a gap and now you have a clog between the nozzle and the throat that blocks the filament.
It might require you to disassemble the nozzle from the heating block and clean up the inner part. You will have to do this while the nozzle is heated up, otherwise it will probably not be possible to disassemble once there is filament floating between.
At first, I could fit an Allen wrench through the throat to clear the old filament which worked. But after, the throat couldn't fit it anymore. It also couldn't fit the 1.75 pla. Any ideas? It seems to be something stuck in the throat. If I could get some help thanks.
Thaaaanks! 🥰🥰💖💖
Will this work on the Ender 3 Pro?
How far should you push the broken filament with the rod?
What do I do if I use an ender 3, where the extruder if far apart from the nozzle?
This tip made it easy to fix, thanks.
boss ur the best
Thanks Teah!
Thanks
i was printing something and the filement broke at 14hours rip :( and i tried it again and it broke at 1:34hours
When I printed something a massive heart symbol mine jammed it couldn’t go up/down
thanks!!!
👍
Mine's a Creality ender 3 pro. It snapped at the bit where it feeds down the pipe. What do I do?
Happened to me with my ender 6
I'm sure this is great for direct drive hot ends, unfortunately I have bowden style.
So i have to push it with new filament until all the old filament is out?
It won’t work because the filament won’t even feed for some reason
Then you might have a clogged nozzle. most probably you will have to heat up the nozzle and then unscrew it from the heatblock to check whether there is a clog in the nozzle or in the throat. Be careful not to burn yourself doing that.
What if its melted into the tube and stuck so far into the hot end that your machinist bf who weight lifts also cant remove it without buying a new hot end ? I changed no settings just whatever fillament i used was awful i have no idea
Nozzle was clean tube was not loading tried to reset bed and wondered if it was the nozzlw loader which is acting funny i thinj i need to call creality and ask questions
This only works with a direct printer... ):
Sure, that's true :-D
This didn’t work
wtf r u talking about. ender 3 has none of these parts