Thanks for this! Kind of dreading doing this. I have a gasket leak at one of the mounting bolts(which i noticed when rebuilding my alternator). The bearing still sounds smooth...how insane would it be to attempt replacing *just* the paper gasket? Or should i just plan for a proper rebuild?
Honestly it might not be the paper gasket. There are so many seals in these, it's incredible that they don't leak more often. Sorry for the slow reply!
It might. Usually it just results in whining from the pump and it fails completely. You might be lucky that the bearings haven't failed, but those pressure disks aren't sealing. If there's gunk keeping them from moving freely - that could be the issue, keeping them from pressing firmly against the shaft to create pressure.
![[[OFFICIAL MV]] เอิ้นขวัญให้อ้าย- อ๊ะอาย สกุณาพร | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/83x6L3X3qh0/mqdefault.jpg)
Thank you for reminding me how to do this it’s been a decade or more since I did it and forgot a couple of things
Thanks 4 Good Info!!!
Thanks dude been meaning to rebuild my spare as my current one leaks slightly :|
Doooooo iiiiit! You GOT this!
Thanks for this! Kind of dreading doing this. I have a gasket leak at one of the mounting bolts(which i noticed when rebuilding my alternator). The bearing still sounds smooth...how insane would it be to attempt replacing *just* the paper gasket? Or should i just plan for a proper rebuild?
Honestly it might not be the paper gasket. There are so many seals in these, it's incredible that they don't leak more often. Sorry for the slow reply!
@@TheProPilot thanks!
Do you have the part number of that ball bearing ?
tmb203lsax
Hello, i the pressure in my toyota power steering pump is week and the steering wheel i little heavy to move, do you think this will help ?
It might. Usually it just results in whining from the pump and it fails completely. You might be lucky that the bearings haven't failed, but those pressure disks aren't sealing. If there's gunk keeping them from moving freely - that could be the issue, keeping them from pressing firmly against the shaft to create pressure.
Part number for the kit you got? Cheers
AutoZone kit actually. Duralast 8797. If you're bearing is gone: take it to Napa and they can get a replacement high end bearing for it. 💪
Part number for the Doo-Hicky please ?
😂 did I call it that? 😂😂 I bet I did!
Not looking forward to doing this
LoL how did it go? Did the video help?