To Infinity And Beyond // Walksnail Avatar Repeater Relay System

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น •

  • @jlarson42
    @jlarson42 หลายเดือนก่อน +11

    A cool product from Walksnail. I can think of uses for it. Events like snow board chases down a mountain. Seems like getting the repeater up high would be best, like strapping it to the bottom of a DJI Inspire.
    Be interesting to what people do with it, and how they set it up.
    Happy flying everyone. 😎

    • @KremerFPV
      @KremerFPV  หลายเดือนก่อน

      Happy flying! 🍺

  • @argentinaerialsFPV
    @argentinaerialsFPV หลายเดือนก่อน +1

    It's perfect for the war, all things go out now in the hobby it's focus to this way. Sad for one way and good for other way, the hobbies loses here for bad uses on drones. Nice product and review !

  • @catbroh
    @catbroh หลายเดือนก่อน +1

    Nice to see someone actually test this!

    • @KremerFPV
      @KremerFPV  หลายเดือนก่อน

      😎

  • @exis221
    @exis221 หลายเดือนก่อน +7

    Thanks for the review.. wish to see it tested on the field. Please update the tests. Love from Malaysia 🇲🇾 FPV Pilot.

    • @KremerFPV
      @KremerFPV  หลายเดือนก่อน

      My pleasure, thanks for watching!

  • @BrandonBeans
    @BrandonBeans หลายเดือนก่อน

    @18:31 that thing is cool! as for the ws repeater, it seems cool but no control signal repeated. Maybe Walksnail is ready to integrate a control link into their transmission?

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา

      Hopefully they will do it down the line.

  • @brubakerjm
    @brubakerjm 28 วันที่ผ่านมา

    I'd be really interested in an ELRS relay video. I *think* the CRSF coming out of the ELRS RX can be fed into the JR-bay pins on the back of the repeating module? I thought about trying this with my Crossfire TX a while back but didn't get around to it. An ELRS repeater, especially 2.4Ghz at the handset to 900Mhz on the plane, would be really interesting for 1) TX antenna placement, higher/above obstructions and 2) flying from indoors in the winter!

    • @KremerFPV
      @KremerFPV  26 วันที่ผ่านมา

      Yes, the product I showed briefly in the video should allow you to easily create such a relay system.

  • @石鑫磊-c1b
    @石鑫磊-c1b 29 วันที่ผ่านมา +1

    There are already SBUS forwarding boxes sold on Taobao in China, which can relay remote control signals.

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา

      👍

  • @willsintheair
    @willsintheair หลายเดือนก่อน

    Thank you for opening the case!!

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา

      No worries!

  • @PropsOff
    @PropsOff หลายเดือนก่อน

    Great video, Gal. I was watching drones deliver supplies to homes in the mountains of N. Carolina and they used Mavic quads with repeaters. Very cool 4shO. Way out of my price range, though...🍻

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา +1

      Thanks mate!

  • @Kleinage
    @Kleinage 28 วันที่ผ่านมา

    Looks like Hollywood money product! Use cases: filmmakers, extreme sports/ tv, search and rescue, police and fire reconnaissance work. Installation security patrol flights.
    Probably not for most hobbyists? Except our crazy long range friends.

  • @MCsCreations
    @MCsCreations หลายเดือนก่อน

    Fantastic review, Gal! Thanks a bunch!!! 😃
    Stay safe there with your family! 🖖😊

    • @KremerFPV
      @KremerFPV  หลายเดือนก่อน +1

      Thank you! You too!

  • @NorgeSquad
    @NorgeSquad 28 วันที่ผ่านมา +1

    Why didn't they make the TX side RP-Sma and the rx side sma. And are the antennas Moxon or patch antennas?

    • @KremerFPV
      @KremerFPV  26 วันที่ผ่านมา +1

      Probably to save some costs. Good point though.

  • @mark6302
    @mark6302 หลายเดือนก่อน +1

    That's awesome and it looks like a robot octopus

    • @KremerFPV
      @KremerFPV  หลายเดือนก่อน

      😎

  • @jumpstartfpv
    @jumpstartfpv 28 วันที่ผ่านมา

    Thank you for bringing out a very important fact.
    So if I fly closer to me to land and the repeater antenna are not pointed towards me as is going to be most of the cases my video link is going to be weaker.
    That's going to an issue.

    • @KremerFPV
      @KremerFPV  26 วันที่ผ่านมา

      Yes indeed 👍

  • @johncarold
    @johncarold หลายเดือนก่อน

    Hi Gal, Great video and review of the Avatar Repeater.

    • @KremerFPV
      @KremerFPV  หลายเดือนก่อน

      Thank you 🤗

  • @skygremlinfpv
    @skygremlinfpv หลายเดือนก่อน

    LET'S GO!

  • @providenceagent2372
    @providenceagent2372 หลายเดือนก่อน +1

    what would be the estimated range for this?

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา

      According to Caddx it should extend the range by 4KM.

    • @providenceagent2372
      @providenceagent2372 29 วันที่ผ่านมา

      I wish they had something better​@@KremerFPV

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา

      @@providenceagent2372 how far do you want to go? 😉

  • @mrmoon_fpv
    @mrmoon_fpv หลายเดือนก่อน

    How would you be able to use the Goggles L? I saw the video released by caddx and they require you to change the antennas on the goggles x to 5.1Ghhz antennas. the goggles L do not have the ability to do that?

    • @KremerFPV
      @KremerFPV  หลายเดือนก่อน +1

      Yes that's something that I should have mentioned in the video. Yes - it will work however it won't be optimal since changing the antennas cannot be easily done. Same goes for the patch antennas of the VRX.

  • @Dawe957
    @Dawe957 หลายเดือนก่อน +1

    How much latency does it add?

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา +1

      I didn't test it. I can guesstimate about 40ms but I didn't test it.

    • @jumpstartfpv
      @jumpstartfpv 28 วันที่ผ่านมา

      ​​@@KremerFPVThat would make any proximity fpv drone flying almost impossible

  • @PatientZiro
    @PatientZiro 29 วันที่ผ่านมา

    Nice review, Gal!
    You didn't mention how much range you gained using the repeater.
    500 bucks is too much for what seems to be a half-baked product...

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา +2

      Thank you! It pretty much doubled the range but keep in mind that the test was not done under ideal conditions.

  • @dagobb
    @dagobb 28 วันที่ผ่านมา

    This is only useful for very specific purposes, I can't imagine someone placing the repeater 2~5 km away simply to improve reception.. You can simply move to a suitable location in order to get better reception.

    • @KremerFPV
      @KremerFPV  26 วันที่ผ่านมา

      It can be good for cinematic productions and you csn also use it as a wireless ground station.

  • @DronieWalker
    @DronieWalker หลายเดือนก่อน

    Does it work for.... DJI AVATA2

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา +1

      No, only Walksnail.

  • @herotrojan1645
    @herotrojan1645 หลายเดือนก่อน

    That monitor is what inch bro? I think i need one

    • @KremerFPV
      @KremerFPV  หลายเดือนก่อน +1

      th-cam.com/video/S6838QiJy88/w-d-xo.htmlsi=Q2EufxbXIWTUwk_k

  • @jgbelmont
    @jgbelmont 26 วันที่ผ่านมา

    If only it reached colombia for some of that pure pure.

    • @KremerFPV
      @KremerFPV  26 วันที่ผ่านมา

      LOL

  • @ADfpv
    @ADfpv หลายเดือนก่อน

    Why changing vrx/goggle antenas to RHCP will help? I was thinking all the same type is the right way to go... am i wrong?

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา

      Just to be clear - the antennas on both VTX/Repeater VTX or VRX / Repeater VRX port should use the same polarization.

  • @thirtythreeeyes8624
    @thirtythreeeyes8624 หลายเดือนก่อน +2

    It's weird how it seems every company is focused on big quads and long range now, I wonder why lol.

    • @SSIL_FPV
      @SSIL_FPV 29 วันที่ผ่านมา

      @@thirtythreeeyes8624 hope for cinematic 😏

  • @mplouis
    @mplouis หลายเดือนก่อน +2

    it is nice, but i thought it would cost around 200$, not 500$

    • @KremerFPV
      @KremerFPV  หลายเดือนก่อน +1

      Yes I hope the price will go down...

    • @tattoocollective2599
      @tattoocollective2599 26 วันที่ผ่านมา +1

      @@mplouis that’s about the same price for a HD video receiver for most UHD filming rigs with transmitters being similar. If it gets over 1000ft or 1w it is what it is right now. Octapads are silly looking though.

  • @jamesmason7124
    @jamesmason7124 หลายเดือนก่อน +1

    I'm very interested in this product but at over 500 dollars I will have to pass

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา

      Yes it's definitely not priced for everyone. Hopefully the price will come down if there will be enough demand.

  • @josh12823
    @josh12823 หลายเดือนก่อน

    dji all the way

    • @EnglishTurbines
      @EnglishTurbines 29 วันที่ผ่านมา +1

      Oh dear, DJI Fanboy alert....lol...🤔😳😏🇬🇧

  • @wtfdookiefpv
    @wtfdookiefpv หลายเดือนก่อน

    testing in the worst environment possible, all those wifi routers and only being 4 feet off the ground is no where near real world unless you only fly around your neighborhood at head height to hit neighbors in head

    • @KremerFPV
      @KremerFPV  29 วันที่ผ่านมา

      Sorry but for now that’s what I could come up with. Hopefully we’ll see more tests pushing the system to its limits soon 🍻

    • @wtfdookiefpv
      @wtfdookiefpv 29 วันที่ผ่านมา

      @@KremerFPV you couldnt fly?