Gizmortiser [Restoration]
ฝัง
- เผยแพร่เมื่อ 25 พ.ย. 2023
- This restoration is on a 1912 door lock mortising machine called the Champion Mortiser by J. Leukart Manufacturing Co. of Columbus, Ohio, USA. The original patent can be seen here: patentimages.storage.googleap...
Mortising machines are among some of my favourite tools to restore as they all seem to have high levels of gizmosity. The amount of mechanically moving parts that all seem to do something and nothing at the same time makes this tool so mesmerizing to watch.
The restoration itself was fairly straight forward, except for a few broken castings and annihilated fasteners. Instead of replacing the fasteners, I decided to remake my own so they could match perfectly with the unique style of each one. I also truly thought this entire machine would be japanned, but apparently it was coated in some early form of enamel paint, which would not be too common for the time.
I'd like to thank CRC for sponsoring this video. You can check out the products from them used in this video in the links below:
www.evapo-rust.com
www.crcindustries.com/evapo-rust/
www.crcindustries.com/smartwasher/
Wrenches, screwdrivers, and socket drivers are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
/ handtoolrescue
Instagram:
/ handtoolrescue
Facebook Group - Share your restorations
/ handtoolrescue
/ handtoolrescue
Reddit - Share your restorations
/ handtoolrescue
Podcast (with @jimmydiresta and Andrew Alexander) - anchor.fm/fitzall - แนวปฏิบัติและการใช้ชีวิต
![Rare Bow Chainsaw [Restoration]](http://i.ytimg.com/vi/Wjv75kJyZ7M/mqdefault.jpg)
![Rare Bow Chainsaw [Restoration]](/img/tr.png)
![Antique Vertical Steam Engine - Part 1 [Restoration]](http://i.ytimg.com/vi/ucRF42U_ZFk/mqdefault.jpg)
![Someone paid an equivalent of $2000 for this in 1914 [Restoration]](http://i.ytimg.com/vi/rw_8FWJuSho/mqdefault.jpg)
![[Full Episode] Hell's Kitchen Thailand EP.12 | 28 เม.ย. 67](http://i.ytimg.com/vi/xCjbu5t25Pw/mqdefault.jpg)
![[TH] VCT Pacific - Regular Season - สัปดาห์ที่ 4 วันที่ 1 // BLD vs PRX | GE vs DFM](http://i.ytimg.com/vi/MdnZuQ1-pas/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | แดนเซอร์ลำไย เด้งจน 1,000,000 แตก!!!](http://i.ytimg.com/vi/MYsBsMIQeT8/mqdefault.jpg)
![1900s Pedal Metal Lathe [Restoration]](/img/n.gif)
The fact that he doesn't do shady things like make a piece of equipment dirtier before working on it (looking at you, rug cleaning videos) or pull any other shenanigans is very underappreciated around here. He has legit skill and talent, he is legit creative. No clickbait titles or thumbnails.
This guy is solid in my book.
He really is the best on TH-cam. I tried watching others but they fake so much. The way I see it, it's not a restoration if they did the damage themselves just to make a crappy resto video.
i would die if he did a skit with him pretending to rustify something and got busted by the forbidden nutella
Agreed! No shitty music, no "hahaha look how hard I can hit this with my hammer". Just a man doing something he does well and sharing it with the internet.
Somehow it is not easy to find items that fit, that are neither trivial to repair (and basically require a power wash), nor so far gone that you will essentially be making a new item while looking at the remains of old one.
...or wandering aimlessly along the jungle path, only to come across an extremely rusted chainsaw which has somehow pitched up in a tree. (Also of course, being followed by an equally aimless, yet propitious, cameraman.)
Years on and you still do the best and most unusual restorations on utube.
That is no kidding. He must have large network to get ahold of some of this stuff.
I agree
Let's all appreciate the fact that there is no uncessary music, just a man renovating a tool. That's all you really need.
*YES!!* The "no music" on a TH-cam channel is worth a lot!
I have been following HTR for years (before I discovered Jimmy Diresta or Pask Makes). HTR never fails to deliver and is one of my top 3 channels on TH-cam. I also appreciate the humor you bring to your work. It's a lot of fun to watch and I love your work!
Thank you!
I was his first subscriber, almost 15 years ago. He’s still using the same jar of Nutella
he got me with the head banging sandblasting. instant subscription.
I would have never guessed it was for making pockets in doors for knob/locks. That is amazing
Giz-mortiser. I guess you need to know what a mortise is though.
not every body no that@@kindablue1959
Aside from the amazing results of what you do, it's amazing that someone sat down and began thinking "if I put this here and if it turns this here, then this will....." All without a computer, other than maybe a slide rule.
Yeah. Slide rules got us to the moon, they're so powerful.
@@TheLegendsmithalmost too powerful….
Necessity is the mother to every invention
I think this piece is pre slide rule!
We got to the moon and built the SR-71 with a slide rule! 🤯😱
@@davidhelmuth6654slide rules have been around since the mid 1600s! 🤯
As a master locksmith, this is one of the coolest tools I have seen you restore. I have hand mortised my fair share of doors and when it comes to antique locking hardware, this would have been a game changer for some of my jobs.
Great video! Love it!
Hmmm.. As a master locksmith myself, I'd like to say that this would be better used as a reference tool which shows how much harder things were in the past. LOL!
There are 'modern' versions of this type of mortiser made that come with either a router or an electric motor.
@@shopshop144if its not a hammer a drill and a chisel youre as fumb as they were back in the victorian age when this monstrosity was invented.
I didn’t realize this mecha carved slots into doors for handle/lock systems. Gizmotiser; What an odd name for such a specialized device! 🤔
Wow! All new equipment! Sand blaster, solvent washer, painting booth/area, Evaporust, new shop facilities... You deserve it!
that blowtorch welder was insane too
As a former carpenter, I appreciate this tool.
looks like the mordent days equivalent for a drills is smaller,
but with more manual input when it comes to depth and side to side movements.
but I bet you could DIY portable cnc with inside of the formfactor of this tool.
but cost justification analysis, would be on personal basis
but this were cool tool for its time
Ok jesus.
Yes, he makes great videos.
As a current nobody, I also appreciate this tool.
You're never a former carpenter! 😊
Once and always.
I appreciate the naturalness of the work scene no ridiculous music drowning out the sound of the tools or dramatic innovations, just the man his tools and his project.
When I first started watching his videos, the lack of narration was jarring. Now it's preferable. I wouldn't mind it, but since I'm mechanically minded and generally don't need things explained to me, talking over the whole thing isn't necessary. His hand gestures and occasional captions (and the very occasional howl of frustration) are plenty. Oh, and the thump as his forehead hits the window on the blast cabinet.
@@floridag8rfan OH yes the forehead on the window is epic 😂.
The man, the tools, his project, and one very horny cricket.
It amazes me to think what the old timers came up with without the benefit of modern design technology. Machines like this that are both relatively simple and mechanical complex - somebody envisioned this machine in their head, sat down at a drafting table and drew it out, then developed casting patterns, machined it on far simpler machine tools, etc. Absolutely amazing.
The ancient tech that predated this was pretty amazing.
And those tools were made to last a lifetime.
but that was when the average lifespan was much shorter@@WorkshopLarry
@@peacenow42... but here we are - a bit of TLC, and this machine is still working!
and all one needs is our advanced knowledge and tools to make it so! Love these restorations.@@DownhillAllTheWay
Well Shucks! When I added on to my 1920s home I mortised all the doors by hand with spade bits and chisels. Took an extraordinarily long time. While it was "fun" and fulfilling, this machine would have been the tool my grand-carpenters would have reached for! I'm happy you restored and demonstrated this beauty!
The today price of a unit with all those castings would be outrageous! Great find and condition. Nice to find something like this that wasn't stored outside.
for real. I just restored my bench vice, and someone had taken an angle grinder and a chisel to the screw cover.🤦
Not only was this an amazing restoration of an incredible tool, It is making me feel a lot better about the price of the domino tennon tool I was looking at.
I doubt it would have been cheap back then either
and knowing how it was stored and how it was found would add so much to our delight.
I just smile every time I see the HTR opening 🎉
Whenever I watch you restore an old piece of equipment, I’m amazed with the fact that someone thought and built this long before computers, and high tech machines to make the parts 🤔
Yeah, and somehow how those tools were cheaper to produce then some of the garbage they come up with today
The engineers that made this marvellous contraption would be very proud of you
This is Fractal Vise level stuff
You get the coolest, and the gizmoziest tools I ever seen on TH-cam.
I can watch this this thing mortise doors for hours and hours.
The thinking it had to take to make a tool like this in 1912 is mind boggling.
Fun stuff.
Thanks HTR
Very cool. You are unquestionably the world's greatest expert in Gizmology!
A veritable Gizmaster.
Is it pronounced giz-mology or jiz-mology?
@@d00dEEEthe gizmeister
Which makes him a Gizmologist lol
the foremost expert in gismotology! @@iteerrex8166
I didn't know CRC made a ONE THOUSAND LITRE jug of Evapo-Rust. I have never known such biting, acerbic envy as this. HTR is living the greaseball's dream, folks. You can't even BUY this stuff in the big bin in Canada yet, so the CRC people must really like our man here. Congrats on one million subs, duder. Women want him; men want to be him; *rust fears him.*
I love these old mechanisms. They have all the stuff you learn about in engineering, cams, cam followers, acme screws, rack and pinion, all types of bearings including babbit metal, etc.
I was literally just about to go to bed and you have to drop a new vid? I guess I'll go to bed later, it's only 7am here
Same!! LOL
7 AM no sleep gang!
Been working night and just needed to pee after sleeping 5 hours, must see this before sleeping again
Florida? 7am here
@@talbertuhlir9370 Nah, Michigan
About damned time. I've been trying to figure out how to restore my mortiser for YEARS. At last, I have something to go on.
no bullshit, no making things dirtier just to clean them, just Legit restorations of absolute goddamn Contraptions. unequivocal best restoration channel out there.
That is what I like about your show: none of the endless, want to be cute or showing off chitter chatter. You just get down to business and fix whatever you are working on. Nor do you try to see how many videos you can put out you choose quality over quantity. Keep up the good work.
I often wonder how this and other contraptions (gizmo's ) you restore were received back in the day. I keep imagining some salesman demonstrating and touting these gizmo's as the latest time and labour saving device while perspective buyers looked on in amazement and wonder and possibly fear. Oh the stories. Cheers from Sussex, NB.
I like the story of how the original engine the Wright Brothers had built was built from scratch by a friend. Out of necessity.
I appreciate that when you dismantle something, you just take it apart normally . You don't treat every screw, pin, gear and whatnot like its a priceless artifact made out of glass. To me, that just makes it slow and boring. Keep up the good work!
I know exactly the thing you're talking about! Those channels drive me up the wall.
I remember some of my Navy shipmates doing that "everything is so fragile" crap on our gear. Me: "It's made of steel, not glass!"
Solid! Quality!
I like your stuff. I always have had a love for the old school stuff and the genius it took to make it. And then?!? You revitalize it! Great content. Also, like a bunch of the others have mentioned, no stupid music.
The sandblaster bit absolutely killed me!
That thing was way more complicated than I would have thought.
I’d have gotten it apart and probably would have stayed that way 😁
Pretty sure that's half the reason he makes these videos.
@@jandrewmoreI asked him that a really long time ago. He said that is why he started recording, it was so he could go back to remember how to put it all back together again.
Even with the video to help........
This mechanism seemed to need far less restoration than the ones I've watched in the past, but watching you disassemble and reassemble it allowed me to see into the mind of the person that created it. It's truly amazing what is possible in the analog world with the right combination of gears and levers.
That is an incredible amount of complexity to avoid having to chop a mortise with a chisel!
Every other repair or restoration channel I have to play at 2x speed to watch, but never on this one. He has perfect pacing.
Thank god you thudded your head against the sandblaster plexiglas (was worried for a minute when it wasn't you normal blaster). That has always brought a smile to my face in the older videos where you went all out ^^
I remember the first time I saw him do that. I had to rewind 5x to be sure that’s what I saw. I look for it every time! Cracks me up!
@suzil7687 haha, yeah. Also the time he worked on the "flame thrower", him testing it out always leaves me in stitches!
I was worried that the "Smart Washer" would wash away some of the gizmosity. Glad to see it is Gizmo safe. 😊 Great video thanks!
Ever-present cricket was a nice guest appearance. Very knowledgeable. You should invite him more often. 👍
This restoration is so lovely. A purely mechanic device. I love those old machines. They where build to last and do their job. Not to have tons of senseless features and die within two years, to sell another one.
Right? How long did we have the abacus?
That intro kills me every time 😆
@HandToolRescue, absolutely loved the 80's/90's family sitcom intro! Genuinely genius my friend!😂😊
This is the lovechild of the Antikythera Mechanism and a grandfather clock.
More like the result of a three-way between those two and a large breast drill. 😂
Just goes to show that even way back then, there's a tool for that. Nice work Eric
Love your trade, my friend!! Your videos are one of the few I click "like" before I watch it. It was great to see another project from Ohio. Much love and respect for your channel!!
I'll bet Mr Chickadee would love to own that. He loves old woodworking tools.
Какие КРУТЫЕ МАШИНЫ были придуманы и сделаны в далёкие времена! Самое важное что они работают без электричества, только на ручной тяге!
A hand cranked milling machine. This took one smart cookie to think of this and design it. Simply brilliant mechanical artwork. ❤
On a side not I love the shop upgrades especially the sandblasting apartment you've acquired. 😎👍
"sandblasting apartment" I LOL'd at that. It is the biggest cabinet I've ever seen :)
Glad there was a demo at the end, the sorcery of such woodworking things is beyond me. But it does look like it would be immensely satisfying to use, maybe not so much after being an underpaid and impoverished carpenter having to do it 100 times a day. Beats using something like a chisel or however they did it in the pre-Gizz days
It never occurred to me to swing the bit like a pendulum. Brilliant!!
I'm glad you demonstrated that tool, I had no idea what it was, or what it was used for. If you install doors, this would be a handy thing to have! Just imagine what your co-workers would think, if you used this at a construction site.
I always look forward to your videos and the humor you inject into them!
Interesting watching all the movements and gears on this. I guess routers took its place.
it seems the strangest gizmos always come to you. great like ever.
TH-cam doesn't pay this man enough. He could be pumping out dumb ass videos left and right but instead he waits until he finds something cool to work on. One of the very few content creators with dignity left.
Can we take a moment to appreciate HTR's dedication to keep working, even inside a cathedral
I was trying to figure out the "temporary" workshop.
I thought it was a blimp hangar.
What a clever machine. You tackle the most complex restorations, on you tube. The production quality of this video is so much better than previous ones.
I always enjoy your projects, you produce brilliantly edited videos of each rebuild/resto., but I’m often amazed at how overly complicated or unnecessarily engineered objects find their way to your workbench. Regardless: thank you, as always, for sharing.
Seeing it in action quickly explains the complexity of the whole mechanism. The large mickey mouse eared wing bolts are exquisite
Among the top TH-cam channels in history.
All the engineering and time that went into this is amazing, to think, this is how they sharpened pencils 100 years ago, incredible.
I'm always impressed with your brazing
for the next introduction of the sandblaster, in triple jump or fosbury-flop. This could make my day!!!
Ein wunderschönes Exponate für das Museum 👍
What an incredible invention for the time!!
This mortiser could be used not only for installing lock assemblies but would be great for just about any mortise joint especially for furniture.Great job on restoring it!!
Thanks!!
Incroyable, toujours aussi patient et talentueux. Et puis, cette petite dose d'humour qui ne gâte rien.
That thing offers a plenitude of ways to crush the user's fingers. Great video, HTR!!
Your intro rocks. Makes me nostalgic for the 90s 😂
I find it incredible how many parts went into making a tool such as this. I wonder how many were actually sold. Great to see you restoring this one.
Fascinated that you did the Evapo-Rust before the parts cleaner - I would have thought you would want to get the dried grease and grot off first so the Evapo-Rust can get to the metal.
Maybe he can’t get the solvents from the parts washer into the evapor-rust? Idk actually just a guess.
I always Evapo-Rust first since any washing might remove some delicate features like pin-striping.
@@HandToolRescue interesting. Then again, does it make sense to use the evaporust on parts that get sand blasted anyway?
@@HandToolRescue Thank you! That makes perfect sense.
You're rapidly gearing up for one of the weirdest industrial museums in Saskatchewan! I'll visit for sure!
I ain't too gonna lie, I had to fast forward to the end to see what this contraption does. It's awesome. Growing up, we lived in a couple of houses with that style of door locks. Ok, it's time to go back to the beginning to watch the whole video. 😁
Honestly I was surprised at how functional it was before you started working on it. Normally the stuff you get is either completely seized up or broken in some manner that prevents it from moving, but this was pretty gizmunctional right at the start.
Best sound editing to date. Fantastic.
Awesome piece of yesteryear equipment , congratulations on cleaning this piece of History ! Thank you .
Lovely restoration of a very interesting old tool.
I also noticed you have a few workshop upgrades.
it looks like a completely new shop to me.
@@panaphobic1 Yes, he moved. This is a new shop.
Another awesome project 💪👍
Thank you!!👏
💡While I enjoyed and approve heartily of this lovely restoration, I must venture to say that most hobbyists, carpenters, woodworkers, etc., would find this tool to be only 👉very occasionally👈 useful.
That old tool is beyond cool. I'd use it on projects.
Such sophisticated machinery, so beautiful. Have to say I love the good old ways. Now you pay 200$ for a different way to utilize the same electric motor to cut the different way. But never the same amount of ingenuity again.
That's such a beautiful machine, one of your best ones!
I’m amazed at how intricate this thing is.way ahead of its time. Great restoration of course.you put some work into it.great video as always.just continue doing what your doing and on to the next project.👍👍👍😎😎😎
Otro equipo más, con una restauración PRÍSTINA, BELLA, detalladamente ejecutada. Siempre imitado, jamás igualado. Felicitaciones joven HTR 😊.
Inspiration for the Festool Domino? You be the judge. Great rescue. Turn out beautiful.
Amazing job, absolutely beautiful
Nice work!!! it amazes me how incredibly detailed that was.
Ive always loved the 80/90's tool time intro reference. Cheers mate. Hope everyone is taking care.
Expert level 9.8+ achieved.
If you try to imagine the prototype development process and the decision-making mechanisms and control structures that must have been behind the development of such a device, for what quantities, for what profit target, for what price... It's absolutely crazy.
This is an amazing tool. I knew Festool had to get their idea for the Domino from somewhere. Lol. Amazing job as always. Question have you ever been asked to restore a piece for a museum. If not they should
You beat me to it. As soon as I saw what this thing I thought of a festool domino. I've seen somebody make one out of an angle grinder.
Your advice on step 69 is unclear. My gizmortizer doesn't work after following your instructional video. Now my wife left me and my dog has cancer. Thanks a lot HTR, you ruined my life!
sounds like a you problem😅
@@krazyredheadso true 😂
A swift tap or two with a hammer should work well. It'll work on your Gizmortiser too!
Please could you come collect yr wife ,she keeps digging up my daffodils 😡
You forgot to account for the gas clouds on uranus, and neglected to stand on your head. That's what gave poor doggo cancer...
Beautiful work as always. Love these old complex mechanisms.
What are the odds that a guy named Hand Rescue (middle name Tool) would end up with a hand tool restoration channel? Life truly is wonderful
That is a seriously cool machine...I would have loved to see the previous iterations to see how they worked out the final product!
The turntable scratch got me.
This works remarkably well for such a demented design...
That blasting cabinet faceplant always gives me a chuckle. Mostly because I've done that sort of thing too many times, trying to see just that little bit closer than is possible. 😁
This is a very interesting and practical machine. Nicely done.
Outstanding!
That is such a spectacular example of ingenuity, over engineering, and madness lol. I love it.
Gizmollogy at it's best. Thank you gizmowizzard...and yeah, dude that made the machine..blows my mind.
And there goes Festool's patent on the Domino.
You've got a new rust bucket! and fancy gloves. Also, how do you keep track of where all the bits go? Or is that your brilliant mechanical memory
"Keeping track of where all the bits go" is why he first started making videos of his work. Then later on came TH-cam, and the rest is history.
Hand Tool Rescue has an incredibly steady hand. His ability to follow the cracks in that large wheel with his grinder is impressive.
Bro the sander window shenanigans gets me every time.
Just noticed you went over the 1 million mark. Fully deserved. Congrats.