My dad and I restored one of the floor model of this same coffee grinder toput on display in his office (he owned the local Hobart Agency) we replaced all of the hardware, and anything that needed replating with new old stock parts from the parts room, and even had new old stock waterslide-decals for it. Looked exactly like the catalog (and worked like new) when we were done. Lost dad in 2014. Thank you so much for bringing back this memory for me.
I really don't know why anyone would pay so much money to restore one of these without restoring the windings on the stator. They're 100 years old and have probably been through 10k heat cycles. They are covered in varnish to them from shorting to each other. That old varnish decays. At a minimum, there should be a fuse on it.
I swear, half the reason for me watching your videos is the anticipation of the random hilarious stuff. The other half is the pure enjoyment of watching these old relics come back to life. Unfortunately now, I need to go pull out my French Press and make a brew.... It's 9pm and have to work in the morning lol.
When l was a youngster, in the early 50's, gosh lm getting old, the general store had a coffee mill that looked just like that! I used to love going in there because it had so many good smells! The fresh ground coffee, the spices and best of all the store smelled like leather from some of the things they sold!
I’m fascinated by your ability and knowledge of restoring these old tools. It makes me think about the engineers (without CAD) just a slide rule or pencil & paper designing the product. The draftsmen making the blueprints and the craftsman building the parts. Truly amazing people.
That magnetic reshaping tool is ingenously simple... and of course you tried it on the lathe. Of course. 😂 Your little touches of humour are always welcome and on point. I'm really glad you're getting clients! This one must have been so pleased. No stinky century's worth of coffee for them to deal with... I want this to live in a relaxed coffee shop where lots of customers can see and admire it.
We had a vintage Hobart deli slicer at my old deli, and it outperformed and outlasted all of the brand new Chinese built slicers I bought. Every single one of them. I bought it from an old church social hall for $100. I wish I still had that slicer but I sold it with the business.
As a renowned film critic I feel obliged to congratulate you for the sand blasting scene. It was nothing but epic, a true milestone in the history of cinematics and a really good vid. Cheers, looking forward to the next one. 🍻👍😁
THIS is without any doubt the best engineering restoration video I have ever experienced. True craftmanship carried out methodically, instructionally, and with 'old school' pride. I have over 50yrs engineering behind me and am so happy that such skill still survives. TOP JOB !
Hobart built the best equipment. It definitely needed some TLC, but notice how nothing on this thing was actually broken. Whoever paid to get this restored knows what they have.
@@nobuckle40 Yeah, I know. I just wish you guys still owned/manufactured Kitchenaid stand mixers. The N50 Hobart makes is great, but very expensive. Those Hobart Kitchenaid mixers were great...as reflected by the price they still fetch on the used market.
11:00 the adjustment is so you can line up the timing for when each coil is on so the motor actually turns. took me until this point in the video to figure that one out myself. basically if the two little black brush blocks engage too early or too late the motor will just be magnetized in place or even spin backwards. so the timing is actually really important to get the most power and functionality from the coils.
As someone who has experience moving, I can assure you that most things move when you chase them with a hammer. It's not stop motion, just the fear of being hit propelling it forward.
I’m always amazed at how big and robust these motors are! Especially brushes! And rarely are the brushes very worn! Especially compared to dc starters!
The first thing I note - and I'm exactly 34 seconds in - is that you've changed the cast! What happened to Unnecessarily Prominent Adjustable Wrenches, or Emotionally Distant Garbage On The Floor? Are they ok? Were there contractual issues? Did they leave to "spend more time with their families?" Rehab? Enquiring minds and fans need to know!
The only thing that is ever missing from your content is a flashback to when these beautiful pieces of history were being used. Like if we could go back in time and watch them in action in their prime!
Definitely not for more. Purchases like this were astronomically more expensive in terms of real dollars. The race to the bottom in manufacturing has been the result of production efficiencies that include reducing salaries and taking out employees that cost more due to long tenures. That piece of junk from Harbor Freight is what people buy because it's what they can afford. It's a classic example of it costing more to be poor, but the vast majority of us never even notice it's happening.
@@tenchuu007 no, it's all very intentional. they are banning automated labor in favor of sustainable income. Every business class contains a huge volume on screwing people/customers as hard as you can. Lectures that sound like Satan himself is teaching them to make people be evil to one another and preach it's "goodness".
It seems like there are still lots of decent presses and grinders around, but an old mill like this is almost as rare as a coffee lathe! Nice find, and great restoration!
@@hrtlsbstrd I think it's just a joke about a coffee "mill" like an end mill but for coffee. So another machining tool being a lathe, ergo "coffee lathe". But I could be wrong.
Removing the lead paint is a bad move because now superman can see inside your coffee grinder while you are using it and I think we all know how bad that is.
True. One of the top five worst outcomes when grinding coffee is superman landing in your kitchen and jeering at you over your choice of bean. Guy's a real coffee snob. He once lambasted me over my lack of Tanzania Peaberry Coffee then heat-visioned my cup because it was five degrees off optimal temp. I never fully recovered.
Dude. I know this video is old but I gotta say that magnetic English wheel with the ball bearings is farking amazing! Simply brilliant. Definitely one of my favorite channels.
I have to say, the steel ball and magnet idea is absolutely genius! A very convenient and affordable "English wheel". Plus you can get into places you normally couldn't.
Very nice work, when you whipped out the torch for the wire shrink though I figured that 100 octane petroleum soaked workbench would go up like a Roman candle lol 😂
Love this video. I knew the name Hobart meant something to me. Once I saw your Hobart here I remembered my Kitchen Aid mixer. I am also a coffee fan with a couple old Cory vacuum brewers. They would go well with this Hobart. Well done on the restore. You are the best.
As soon as I saw it I had a flashback (child of the 60's), of going to Grand Union with my dad, they had one of those grinders but in shiny red. That smell of fresh ground coffee made the trip worth it. Amazing restoration, that thing is beautiful. Oh yea, I love the balls of steel, they really do take the dents out and put a smile on our faces :), take care!
As a fellow restorer of "God knows what comes my way to make me question my sanity" and the learning process of how the F can I attack this issue.... I very much appreciate your sense of humor. I actually just picked up a near identical machine and found your vid while looking for paint scheme ideas. LOVE THE MAGNETS!! 😅
It’s so cool that you’re using the MDRS magnets and dent balls! The developer of those is a colleague of mine. He’s a really nice guy. The MDRS tools were developed for the musical instrument repair industry!
@@whosonfirst1309 yeah it’s a pretty handy tool in the musical instrument repair industry. It was originally developed and sold by C.G. Conn (the instrument company) but the magnets they used were pretty irregular. Some of them were strong enough to use, and some weren’t even worth using as refrigerator magnets. When my colleagues developed this version, they made sure to only use consistent and very strong rare earth magnets in the system. They also designed the handle to be able to accept a few useful attachments. The magnets are strong enough that I keep my phone, watch, credit cards, and bladed tools very far away from my work area lol. I would also caution anyone with an insulin pump or pacemaker to avoid getting too close 😅
@@suitov 😂 Well I've never asked him, but hey if it works then it works! I can't see a time when I would have to do any MDRS work on a lathe, but stranger things have happened! When I was starting out in the musical instrument repair industry, I never thought I'd find a tuba that had condoms hidden inside, but I found exactly that about a year and a half after I got out of repair school! 😅
I use to work in a musical instrument Manufacturing and repair shops for 25 years and I remember when those magnetic dent removers came on the seen. They work well on big horns like tubas and sousaphone but not so much on small horns like trombones and trumpets. But I really like the way you put that hopper on the lathe and spinning it like that genius. keep up the good work always enjoy your work.🎉
Love the beefy switch, would’ve been from before they figured out how to optimise for costs. It’s action is also really interesting, gives a nice solid click to prevent arcing too.
It's interesting because it's a part that would have been incredibly easy to replace had it been broken... But it wasn't, and a new one would have been a downgrade.
You are amazing! your attention to detail and your obvious research you do to give your customers and these tools everything they deserve is truly inspiring! Thanks for sharing these projects with us.
Another quality episode. I really like the way you tell the stories on Insta and TH-cam, but there isn't much overlap. You can follow the Insta stories start to finish and not be bored with the final video. Really well done. Also I hope aVe comes over and claims his cup a joe soon. That would be epic.
That is a very satisfying switch... Also the original colour was so much nicer than the previous owner's 1970s-X-ray-machine-teal that it had been repainted in. Perfect restoration as always.
Your humour with out dialogue amuses me no end Thanks for the content hand tool rescue 🤘🏻 And a big hello from Newcastle in the north east of England 🇬🇧🏴🇨🇦👍🏻👍🏻😂😂
You give to all of us entertainment , humor , and great restorations 👌 I enjoy your videos and your sense of humor its just hilarious 😂 .. Great job sir 👌
🤣🤣🤣🤣🤣🤣🤣🤣 The humor you inject into your videos....just hilarious!!! The grinder is amazing! Love the paint scheme! I hope the customer was happy with it!!
The best part about your videos is your sense of humor. I could totally work with you in my shop. We'd probably have too much fun with all the shenanigans though.
I watched other you tube videos that restore things and you do it the best, and yes I'm a subscriber to your channel. 9:30 I would think that is to change the motor timing.
Yes that's what I thought too - a factory-set frequency or voltage adjustment for shipping to different markets. The data plate stated 115V at 60Hz which is a very unusual supply - in modern times only El Salvador and some Caribbean countries have that combo - although it could just be a different designation of standard 120V/60Hz North American supply. It was made in Canada after all.
I love a certain quality your videos have that is simplicity in sound, most of your work could be easily appreciated by anybody who speaks any language and that is more important than some people realize.
The "timing" marks inside the motor are for selecting the direction of rotation. I've got 2 much larger versions of these coffee grinders that I've been restoring in my free time and there are many similarities. Nice job!
I wondered if it was for adjusting for electrical phase, so you could manufacture wherever and adjust to the country you brought it to. But that makes more sense
I am amazed how well the magnetic dent remover worked on the lathe. I was sure it was going to end up with balls being launched across the room and the magnet stuck to the ceiling!
I really enjoy watching you do what you do. I myself have restored recently a 1952 Craftsman shaper back to original with fresh table reground. Original color with single stage urethane. Also a Ammco brake lathe for my business. Also back to original condition. Did body work for almost twenty years ,so using that experience the paint work is better than what came new.
It looks like someone back in the day took a trophy, a mail box, a water pump housing, a bench grinder motor and a funnel.., threw it all together and called it a coffee grinder.
@@somejoe7777 the brushes aren’t connected to any power, instead they are connected to each other, so this is a repulsion induction motor. Also when the motor is running it has a regular induction motor sound instead of a universal motor sound.
Whenever I’ve been asked, I always say that the lathe is by far the most dangerous tool in the workshop. Congratulations, this is definitely a sketchy step beyond dangerous!
I'll be honest. This is really really not sketchy.... Try cylindrical grinding or see what even very experienced Machinists do when they have to sand long shafts with strips of sandpaper...... yikes! - an old grey bearded machinist
Very Nice Job! I love the hard work you put into these restorations! I would have chosen a different color though, like a pastel green or light blue,. This grinder would also look good in red, orange, black or brown as the primary color and the gold or silver pinstripes!
I respect the customer's choice, but agree that it didn't thrill me. Was really hoping to see the original color, olive drab. It reminded me of the once popular "avacado" appliances that faded out in the '60s.
Nice subtle shout out to AVE at the end. He is the one that turned me on to your channel years ago. Haven’t missed a single one since, even got my dad watching them.
Hi, the adjustments on the brush plate it is called "ax zero" and it is related to the magnet field "slippage" angle. Adjusted wrong it create allot of sparks between brushes and the rotor collector. The simple way to adjusted is by applying a dc voltage to the stator and measure the inducted current in the rotor on the moment voltage from the rotor is removed. You do this repeatedly adding and remove the voltage, rotate the plate on small amounts until you get as less possible voltage measured on the brushes ... that is the inducted voltage in the rotor measured with a voltmeter. Adjusted wright it will give the less amount of sparks on the brushes... but more important it will set the motor to the maximum efficiency you can get from that motor. PS: Be careful when (and if) you perform this, the voltage inducted in the rotor when removed voltage from stator could be quite high, is same as in old cars engines spark coils when at the end of spark plugs voltage is discharged when the contact points are opened by the cam... self induction that is an opposite current to the initial one applied to the coil. :-)
Another way is to run the motor in a darkened room and see how much spark or commutation you get. Once observed, stop the motor and adjust the rocker and run it again. Repeat until you get as close to no spark as possible.
Hey mate, I love it! Just a quick tip: You didn't show this in the video, but I assume that you know to apply a thin layer of clear coat after you apply the tape, just before painting the secondary colour? The lines seem slightly jagged to me, and I don't know whether it's the rough metal or your camera lens, but I wanted to make sure you knew to do this
I love watching your resto vids. I split my side laughing when you pulled those ball bearings out of your pants. I'm still laughing about it. You do some off the most unexpected things. Great work by the way. You really out did yourself with the pin striping.
Your humour without dialogue amuses me no end😂😂 Thanks for the content hand tool rescue 🤘🏻 And a big hello from Newcastle in the north east of England 🇬🇧🇨🇦🇬🇧🇨🇦👍🏻
I've watched a lot of restoration videos but yours I think is the best. Also I haven't watched any that make me burst out in laughter like yours do on occasion. When you pulled those balls out, I lost it! You are a true asset to youtube.
Very nice restoration! Customer has an unusual taste in colors. Love the pin striping. Who did the decals for you? Did you provide them with a photo or do they have an archive of old decals? The burrs look like they have seen better days wonder if Hobart might stock some of this very old stuff or is there a way to re sharpen them. That right angle stubby screwdriver brought back memories, my uncle had one of those. Don't know what happened to it over the years. I have been blessed to have inherited some his tools and toys.
Top notch workmanship sir, all you need now is a 1920's era General Store to go with it! also, if projects slow down, you could always open a coffee shop!
not sure why this restoration caused my jaw to drop - a few times - but it did. well done! The hopper restoration was super cool! I mean the whole thing was awesome, but the hopper was COOL
Great restoration. I run a business that specializes in the restoration of vintage mixers like Sunbeams, KitchenAids etc. I am preparing to restore one of these Hobart Coffee grinders and will be finishing it in powdercoat as I have a pull powdercoat setup in my shop. Love how you restored the hopper. That is a brilliant method of straightening it out. I wisn I had a big lathe like that to do the hopper for the one I am restoring. Fortunately it’s not in bad shape.
As some one who's just gotten into bread making, this as a mill, period, is so awesome to see. I love grinding my own grains, or coffee, fresh for use. Awesome work and awesome video, thanks!
![Bridgebort Milling Machine [Rescue]](http://i.ytimg.com/vi/zGv7MkdIP_w/mqdefault.jpg)
![Bridgebort Milling Machine [Rescue]](/img/tr.png)
![1910s Electric Breast Drill [Restoration]](http://i.ytimg.com/vi/NpVnw7BDD6U/mqdefault.jpg)
My dad and I restored one of the floor model of this same coffee grinder toput on display in his office (he owned the local Hobart Agency) we replaced all of the hardware, and anything that needed replating with new old stock parts from the parts room, and even had new old stock waterslide-decals for it. Looked exactly like the catalog (and worked like new) when we were done. Lost dad in 2014. Thank you so much for bringing back this memory for me.
I really don't know why anyone would pay so much money to restore one of these without restoring the windings on the stator. They're 100 years old and have probably been through 10k heat cycles. They are covered in varnish to them from shorting to each other. That old varnish decays. At a minimum, there should be a fuse on it.
@@christo930 From the description, "I did not resharpen the burr grinders as the customer does not plan on using this as it's more for decoration."
@@travispluid3603 If he is not going to use it, it's probably not a problem.
I swear, half the reason for me watching your videos is the anticipation of the random hilarious stuff. The other half is the pure enjoyment of watching these old relics come back to life. Unfortunately now, I need to go pull out my French Press and make a brew.... It's 9pm and have to work in the morning lol.
The sandblasting entrance was the funniest thing I have seen on this channel since The Model. This is an awesome restoration! Great work!
wire wheeling had its moments too...
The model was nice indeed. Always something funny to look after with these excellent restorations..
Man, The Model was a classic from start to finish
Yeah that was hilarious. Unexpected.
35:18
My full time job is a Coffee Machine Engineer. It's so good to see a old Coffee grinder put back in to action. Well done .
Haha, the steel balls, this is why this is my favorite vintage tool, equipment/restoration channel. Gotta be able to have fun while you work.
The "extra coarse" setting is for when you want to use coffee beans as aggregate in the making of mud-bricks.
To be fair it was from the 1920's pretty much everyone was still drinking percolated coffee, no fancy stuff like espresso and the likes at home.
Another awesome moment of learning, thanks to TH-cam. If only I drank coffee.
Boiled coffee is best coffee, preferably over fire.
@@SilvaDreams don't forget french press and nowadays the extra course would work great for cold brew
@@JrgenHelland00 I call boiled over a fire cowboy coffee
When l was a youngster, in the early 50's, gosh lm getting old, the general store had a coffee mill that looked just like that! I used to love going in there because it had so many good smells! The fresh ground coffee, the spices and best of all the store smelled like leather from some of the things they sold!
I’m fascinated by your ability and knowledge of restoring these old tools. It makes me think about the engineers (without CAD) just a slide rule or pencil & paper designing the product. The draftsmen making the blueprints and the craftsman building the parts. Truly amazing people.
That magnetic reshaping tool is ingenously simple... and of course you tried it on the lathe. Of course. 😂
Your little touches of humour are always welcome and on point. I'm really glad you're getting clients! This one must have been so pleased. No stinky century's worth of coffee for them to deal with... I want this to live in a relaxed coffee shop where lots of customers can see and admire it.
My dad used to work for Hobart, it's nice to see this get restored!
We had a vintage Hobart deli slicer at my old deli, and it outperformed and outlasted all of the brand new Chinese built slicers I bought. Every single one of them. I bought it from an old church social hall for $100. I wish I still had that slicer but I sold it with the business.
When today’s machines break, you junk ‘em!
When yesterday’s machines break, you rebuild ‘em!
They just don’t make ‘em like THAT anymore! ⚙️🔩
As a renowned film critic I feel obliged to congratulate you for the sand blasting scene.
It was nothing but epic, a true milestone in the history of cinematics and a really good vid.
Cheers, looking forward to the next one. 🍻👍😁
Glad you enjoyed it!
Always. 😎
@@HandToolRescue 35:20 Bro, you have the balls!!! 😂😂
THIS is without any doubt the best engineering restoration video I have ever experienced. True craftmanship carried out methodically, instructionally, and with 'old school' pride. I have over 50yrs engineering behind me and am so happy that such skill still survives. TOP JOB !
Hobart built the best equipment. It definitely needed some TLC, but notice how nothing on this thing was actually broken. Whoever paid to get this restored knows what they have.
They still do. I work for them. We still make top of the line commercial food equipment.
He says he found it at auction so I don't think someone else paid for the restoration. Hand Tool Rescue must just appreciate quality coffee.
@@theKashConnoisseur He says in the video that the client picked the color. Which I assume is the person paying him to restore it.
@@nobuckle40 Yeah, I know. I just wish you guys still owned/manufactured Kitchenaid stand mixers. The N50 Hobart makes is great, but very expensive. Those Hobart Kitchenaid mixers were great...as reflected by the price they still fetch on the used market.
@@danielprivate7442 Ah, must have blinked and missed that caption.
11:00 the adjustment is so you can line up the timing for when each coil is on so the motor actually turns. took me until this point in the video to figure that one out myself. basically if the two little black brush blocks engage too early or too late the motor will just be magnetized in place or even spin backwards. so the timing is actually really important to get the most power and functionality from the coils.
I'm really impressed with your stop-motion camera skills. At 9:41 it really looks like the grinder is "walking" across the bench top. Well done!
lmao
That's sometimes the only way my car goes. Some hapless bugger has to hammer it from behind.
As someone who has experience moving, I can assure you that most things move when you chase them with a hammer. It's not stop motion, just the fear of being hit propelling it forward.
@@marklammas2465 ...that's what she said
@@marklammas2465 Ive had women like that🤣🤣
I’m always amazed at how big and robust these motors are! Especially brushes! And rarely are the brushes very worn! Especially compared to dc starters!
The first thing I note - and I'm exactly 34 seconds in - is that you've changed the cast!
What happened to Unnecessarily Prominent Adjustable Wrenches, or Emotionally Distant Garbage On The Floor? Are they ok? Were there contractual issues? Did they leave to "spend more time with their families?" Rehab?
Enquiring minds and fans need to know!
This is the important question 😂
And did you notice the mug from AvE at the end? It’s always nice to see an Easter Egg from another great TH-camr snuck into a video.
I would also like to know where the scaling banana is? I haven't seen them in several episodes!
The thing I noticed immediately is that this video was NOT sponsored by Vaporust. Wonder if something changed on the financial back end of things.
@@ControlledWrinkles tits and pickles man 😂😂😂
Awesome job Hand Tool Rescue! I'm an 80's kid so I can appreciate the 80's themed intro!
The only thing that is ever missing from your content is a flashback to when these beautiful pieces of history were being used. Like if we could go back in time and watch them in action in their prime!
Agreed
Luckily, you have all of TH-cam to search.
used for 100+ years, meanwhile modern junk costs 100x the price and lasts 1/1000000 the time. You get less, for more.
Definitely not for more. Purchases like this were astronomically more expensive in terms of real dollars. The race to the bottom in manufacturing has been the result of production efficiencies that include reducing salaries and taking out employees that cost more due to long tenures. That piece of junk from Harbor Freight is what people buy because it's what they can afford. It's a classic example of it costing more to be poor, but the vast majority of us never even notice it's happening.
@@tenchuu007 no, it's all very intentional. they are banning automated labor in favor of sustainable income. Every business class contains a huge volume on screwing people/customers as hard as you can. Lectures that sound like Satan himself is teaching them to make people be evil to one another and preach it's "goodness".
Amazingly well done. I have never seen an aluminium hopper worked with a magnet and steel ball to remove dents. Ingeniously simple.
It seems like there are still lots of decent presses and grinders around, but an old mill like this is almost as rare as a coffee lathe! Nice find, and great restoration!
Can I ask what a coffee lathe is? The only thing google shows are misspelled lattes
@@hrtlsbstrd I think it's just a joke about a coffee "mill" like an end mill but for coffee. So another machining tool being a lathe, ergo "coffee lathe". But I could be wrong.
I read ‘coffee latte’… Not rare at all.
@@MatthewBurns8 Aha, very rare indeed
@@noeraldinkabam k k k mm, I 8kpokjokk9 m0
As usual, nice job.
I don't know why but I giggled at how the coffee bean hopper looks like a funeral urn for someone's ashes.
Removing the lead paint is a bad move because now superman can see inside your coffee grinder while you are using it and I think we all know how bad that is.
Dammit!
True. One of the top five worst outcomes when grinding coffee is superman landing in your kitchen and jeering at you over your choice of bean. Guy's a real coffee snob. He once lambasted me over my lack of Tanzania Peaberry Coffee then heat-visioned my cup because it was five degrees off optimal temp. I never fully recovered.
On the bright side --> They're delicious!
Will you stop lacing your coffee beans with Kryptonite?
@@quixototalis this is hands down the absolute best reply I have ever gotten on a TH-cam comment. I laughed out loud and you made my day good sir!
Dude. I know this video is old but I gotta say that magnetic English wheel with the ball bearings is farking amazing! Simply brilliant. Definitely one of my favorite channels.
At this point, I'm convinced that coffee grinders are a right of passage for restoration channels.
I thought this was a prank channel?
Rite on!
I have to say, the steel ball and magnet idea is absolutely genius! A very convenient and affordable "English wheel". Plus you can get into places you normally couldn't.
They use them in musical instrument repairs there are some sites with more of that sort of thing
you are absolutely hillarious and at the same time doing such a nice job bringing these items back to life. Another great video!
That what I was going to say, now you’ve RUINED it! 😂
Very nice work, when you whipped out the torch for the wire shrink though I figured that 100 octane petroleum soaked workbench would go up like a Roman candle lol 😂
Love this video. I knew the name Hobart meant something to me. Once I saw your Hobart here I remembered my Kitchen Aid mixer. I am also a coffee fan with a couple old Cory vacuum brewers. They would go well with this Hobart. Well done on the restore. You are the best.
That switch might have stole the whole show for me.
I've never seen one like it. Very cool looking
As soon as I saw it I had a flashback (child of the 60's), of going to Grand Union with my dad, they had one of those grinders but in shiny red. That smell of fresh ground coffee made the trip worth it. Amazing restoration, that thing is beautiful. Oh yea, I love the balls of steel, they really do take the dents out and put a smile on our faces :), take care!
As a fellow restorer of "God knows what comes my way to make me question my sanity" and the learning process of how the F can I attack this issue.... I very much appreciate your sense of humor. I actually just picked up a near identical machine and found your vid while looking for paint scheme ideas. LOVE THE MAGNETS!! 😅
It’s so cool that you’re using the MDRS magnets and dent balls! The developer of those is a colleague of mine. He’s a really nice guy.
The MDRS tools were developed for the musical instrument repair industry!
I didn’t know that was an actual tool. Thanks for the heads up, I thought he used it brilliantly.
@@whosonfirst1309 yeah it’s a pretty handy tool in the musical instrument repair industry. It was originally developed and sold by C.G. Conn (the instrument company) but the magnets they used were pretty irregular. Some of them were strong enough to use, and some weren’t even worth using as refrigerator magnets.
When my colleagues developed this version, they made sure to only use consistent and very strong rare earth magnets in the system. They also designed the handle to be able to accept a few useful attachments.
The magnets are strong enough that I keep my phone, watch, credit cards, and bladed tools very far away from my work area lol. I would also caution anyone with an insulin pump or pacemaker to avoid getting too close 😅
@@jakethebard thank you.
Can your colleague confirm whether the MDRS system is lathe-certified, though...? 😂
@@suitov 😂 Well I've never asked him, but hey if it works then it works! I can't see a time when I would have to do any MDRS work on a lathe, but stranger things have happened! When I was starting out in the musical instrument repair industry, I never thought I'd find a tuba that had condoms hidden inside, but I found exactly that about a year and a half after I got out of repair school! 😅
Even the motor winding is a thing of beauty. I thought I was the only one that was built to last and built to look good doing it.
I use to work in a musical instrument Manufacturing and repair shops for 25 years and I remember when those magnetic dent removers came on the seen. They work well on big horns like tubas and sousaphone but not so much on small horns like trombones and trumpets. But I really like the way you put that hopper on the lathe and spinning it like that genius. keep up the good work always enjoy your work.🎉
Your videos have a very calming effect on me. Better than any TV out there today.
EDIT- 1:05 Mother of God, I Love the Super Troopers reference MAN.
Love the beefy switch, would’ve been from before they figured out how to optimise for costs. It’s action is also really interesting, gives a nice solid click to prevent arcing too.
before planned obsolescence*
You spelled "Ka-Chunk" wrong.
@@soul8bounce Yes, these days they need to optimise for a more satisfying Ka-chunk. Today's clicky switches are not good enough.
@@gorillaau need that movie grade Ka-Chuck that sounds real chunky. Like you just threw one of them power station lever switches.
It's interesting because it's a part that would have been incredibly easy to replace had it been broken... But it wasn't, and a new one would have been a downgrade.
You are amazing! your attention to detail and your obvious research you do to give your customers and these tools everything they deserve is truly inspiring! Thanks for sharing these projects with us.
I come for the restorations and stay for the laughs. The Japaning one caused me to laugh long after the video was over!
The steel ball/magnet lathe idea I have never seen, amazing stuff he does.
Another quality episode. I really like the way you tell the stories on Insta and TH-cam, but there isn't much overlap. You can follow the Insta stories start to finish and not be bored with the final video. Really well done. Also I hope aVe comes over and claims his cup a joe soon. That would be epic.
Just him in some old Timey clothes filmed in black-and-white would be good enough for me!
I worked at Hobart for many years their quality is second to none. Many Hobart machines built one hundred years ago still work today.
Westfall...from Troy I presume?
@@homefrontforge yes
This could possibly be my favorite one yet. Incredible video. Amazing result. I like that you don't spend much time on certain things in the video.
That is a very satisfying switch...
Also the original colour was so much nicer than the previous owner's 1970s-X-ray-machine-teal that it had been repainted in. Perfect restoration as always.
Nice enhancing there, Thorny.
Had to rewatch 21:04 a few times to get my head around wire brushing the cleaner can.
Absolutely gorgeous bit of kit right there.
I love the magnetic dent removal system. Absolutely wild the magnet can hold onto those balls whilst turning in the lathe. And it works like a charm.
i mean it's a fat chonky magnet.
Your humour with out dialogue amuses me no end
Thanks for the content hand tool rescue 🤘🏻
And a big hello from Newcastle in the north east of England 🇬🇧🏴🇨🇦👍🏻👍🏻😂😂
You give to all of us entertainment , humor , and great restorations 👌
I enjoy your videos and your sense of humor its just hilarious 😂 .. Great job sir 👌
Production values through the roof! Felt like an 80s sitcom.
What a great restoration it was a pleasure to see something so old restored to its full potential. Well done you 👏🏻 .
From Paul UK
I really enjoy everything you do. BEST OF ALL, you are not afraid of getting your hands dirty.
Wow, absolutely amazing renovation :)
🤣🤣🤣🤣🤣🤣🤣🤣 The humor you inject into your videos....just hilarious!!! The grinder is amazing! Love the paint scheme! I hope the customer was happy with it!!
Я Ваш поклонник,не устаю смотреть ваше видео.Вы большой МОЛОДЕЦ (творческих Вам успехов) С уважением из России.
The best part about your videos is your sense of humor. I could totally work with you in my shop. We'd probably have too much fun with all the shenanigans though.
I watched other you tube videos that restore things and you do it the best, and yes I'm a subscriber to your channel.
9:30 I would think that is to change the motor timing.
Yes that's what I thought too - a factory-set frequency or voltage adjustment for shipping to different markets. The data plate stated 115V at 60Hz which is a very unusual supply - in modern times only El Salvador and some Caribbean countries have that combo - although it could just be a different designation of standard 120V/60Hz North American supply. It was made in Canada after all.
I love a certain quality your videos have that is simplicity in sound, most of your work could be easily appreciated by anybody who speaks any language and that is more important than some people realize.
The "timing" marks inside the motor are for selecting the direction of rotation. I've got 2 much larger versions of these coffee grinders that I've been restoring in my free time and there are many similarities. Nice job!
He notes that at 23:46.
I wondered if it was for adjusting for electrical phase, so you could manufacture wherever and adjust to the country you brought it to.
But that makes more sense
This screwdriver for difficult places - is the most interesting thing I've seen! It is the thing we need today!
I really hope more people get the “enhance…enhance” reference. Super Troopers is one of my all time favorite movies
I am amazed how well the magnetic dent remover worked on the lathe. I was sure it was going to end up with balls being launched across the room and the magnet stuck to the ceiling!
I really enjoy watching you do what you do. I myself have restored recently a 1952 Craftsman shaper back to original with fresh table reground. Original color with single stage urethane. Also a Ammco brake lathe for my business. Also back to original condition. Did body work for almost twenty years ,so using that experience the paint work is better than what came new.
It looks like someone back in the day took a trophy, a mail box, a water pump housing, a bench grinder motor and a funnel.., threw it all together and called it a coffee grinder.
Its a military grade coffee grinder. So yeah your probably right
I rescued one of these from an old lightship about 35 years ago, but I never had the patience to restore it. Thanks for this!
I’m pretty sure that it uses a repulsion induction motor so the adjustment inside it would be used for changing the direction that the motor runs in.
I was thinking that, too, due to no starting cap.
@@somejoe7777 the brushes aren’t connected to any power, instead they are connected to each other, so this is a repulsion induction motor.
Also when the motor is running it has a regular induction motor sound instead of a universal motor sound.
this is exactly what it is.
The magnet ball technique is the coolest thing I have seen in awhile.
Whenever I’ve been asked, I always say that the lathe is by far the most dangerous tool in the workshop. Congratulations, this is definitely a sketchy step beyond dangerous!
no, it's still the lathe. It's the only tool in a workshop that can instantly kill you and turn you into spaghetti that no-one will want to burry.
Than you should watch "the model" episode
@@yak-machining do you have a link to it? Can’t find it
@@thomashowe855 the model th-cam.com/video/oUWOOFII144/w-d-xo.html
I'll be honest. This is really really not sketchy....
Try cylindrical grinding or see what even very experienced Machinists do when they have to sand long shafts with strips of sandpaper...... yikes!
- an old grey bearded machinist
Отличная вещь. Вечная. Раньше делали на века. Блогеру огромное спасибо.
Lovely job! Very nice paint work. Your vids never fail to make me laugh. Those balls ought to be of brass, except then they wouldn't be magnetic!
fantastic. Still the best channel to watch during long zoom calls...
Very Nice Job!
I love the hard work you put into these restorations!
I would have chosen a different color though, like a pastel green or light blue,.
This grinder would also look good in red, orange, black or brown as the primary color and the gold or silver pinstripes!
I respect the customer's choice, but agree that it didn't thrill me. Was really hoping to see the original color, olive drab. It reminded me of the once popular "avacado" appliances that faded out in the '60s.
Nice subtle shout out to AVE at the end. He is the one that turned me on to your channel years ago. Haven’t missed a single one since, even got my dad watching them.
Those carbon brushes were in amazing condition!
NEVER!! I cannot emphasize enough.
N E V E R !!!111
Never stop a lathe chuck with your hand!!!1
Awesome vid!
Hi, the adjustments on the brush plate it is called "ax zero" and it is related to the magnet field "slippage" angle. Adjusted wrong it create allot of sparks between brushes and the rotor collector.
The simple way to adjusted is by applying a dc voltage to the stator and measure the inducted current in the rotor on the moment voltage from the rotor is removed. You do this repeatedly adding and remove the voltage, rotate the plate on small amounts until you get as less possible voltage measured on the brushes ... that is the inducted voltage in the rotor measured with a voltmeter.
Adjusted wright it will give the less amount of sparks on the brushes... but more important it will set the motor to the maximum efficiency you can get from that motor.
PS:
Be careful when (and if) you perform this, the voltage inducted in the rotor when removed voltage from stator could be quite high, is same as in old cars engines spark coils when at the end of spark plugs voltage is discharged when the contact points are opened by the cam... self induction that is an opposite current to the initial one applied to the coil.
:-)
Another way is to run the motor in a darkened room and see how much spark or commutation you get. Once observed, stop the motor and adjust the rocker and run it again. Repeat until you get as close to no spark as possible.
Very nice touch with the HOBART decal. Love the outcome, well done
Hey mate, I love it! Just a quick tip:
You didn't show this in the video, but I assume that you know to apply a thin layer of clear coat after you apply the tape, just before painting the secondary colour? The lines seem slightly jagged to me, and I don't know whether it's the rough metal or your camera lens, but I wanted to make sure you knew to do this
When you stuck your finger in the end of the grinder I couldn’t help but think Final Destination film. Excellent job again 👍
I love watching your resto vids. I split my side laughing when you pulled those ball bearings out of your pants. I'm still laughing about it. You do some off the most unexpected things. Great work by the way. You really out did yourself with the pin striping.
Your humour without dialogue amuses me no end😂😂
Thanks for the content hand tool rescue 🤘🏻
And a big hello from Newcastle in the north east of England 🇬🇧🇨🇦🇬🇧🇨🇦👍🏻
Как всегда интересно и познавательно 👍👍👍Бесподобная работа👍👍👍👍👍
I've watched a lot of restoration videos but yours I think is the best. Also I haven't watched any that make me burst out in laughter like yours do on occasion. When you pulled those balls out, I lost it! You are a true asset to youtube.
Do you have an ultrasonic cleaner? I find for items like the control knob it works great for getting dirt out of recessed lettering, groves, etc.
Pure genius putting the feed hopper on the lathe with the MDRS!
Can’t decide if I like the restoration or your humor more… it’s a tie.
🤣
I feel like we come for the humor stay for the transformations. Haha
@@richardmchale3097 Yeah…. Exactly.
"Fun with the microscope" New section of the channel, I love it. Greetings from Argentina.
Very nice restoration!
Customer has an unusual taste in colors. Love the pin striping. Who did the decals for you? Did you provide them with a photo or do they have an archive of old decals? The burrs look like they have seen better days wonder if Hobart might stock some of this very old stuff or is there a way to re sharpen them. That right angle stubby screwdriver brought back memories, my uncle had one of those. Don't know what happened to it over the years. I have been blessed to have inherited some his tools and toys.
th-cam.com/video/iM6wQkyx0Q8/w-d-xo.html
the restoration was fantastic but cosmetically i think this is one of the prettiest jobs you have done
36:24 i can believe that trick with the late worked as well as it did
Top notch workmanship sir, all you need now is a 1920's era General Store to go with it!
also, if projects slow down, you could always open a coffee shop!
GOOD JOB! And, a great sense of humor. I'll bet you're a great teacher. Keep up the great vids, please.
not sure why this restoration caused my jaw to drop - a few times - but it did. well done! The hopper restoration was super cool! I mean the whole thing was awesome, but the hopper was COOL
one of your best shows ever. now i need coffee. thanks for the show
I was not expecting that "Japanning" gag. Top tier work as always!
Great restoration. I run a business that specializes in the restoration of vintage mixers like Sunbeams, KitchenAids etc. I am preparing to restore one of these Hobart Coffee grinders and will be finishing it in powdercoat as I have a pull powdercoat setup in my shop. Love how you restored the hopper. That is a brilliant method of straightening it out. I wisn I had a big lathe like that to do the hopper for the one I am restoring. Fortunately it’s not in bad shape.
I just had to stop and say the intros get a very decent chuckle out of me every single time and thank you for that
Ok so had to add to my comment after watching this whole thing it had me in stitches lmfao
Köszönöm szépen, ez igazán tökéletes munka és nagyon vicces előadás. Gratulálok. Üdvözlet, Magyarországról. 😀
I think I will cry when you finish making videos. I really love these videos! What an awesome guy you are!
As some one who's just gotten into bread making, this as a mill, period, is so awesome to see. I love grinding my own grains, or coffee, fresh for use.
Awesome work and awesome video, thanks!