Thank you so much! Used this to swap the working screen of a water damaged DSI with a broken top screen DSI. Struggled for 3 hours with an IFixIt guide, but found your video and managed to finish up quickly! :D
This is some pretty interesting stuff. Is this footage of a repair for a DSi that a customer sent in? Also, you guys should invest in a higher definition camera that captures in 1080p for better detail.
Thanks for the video! You did a great job! I like how you showed us how you rolled the ribbon cables together. I have hardly found anyone who shows this part because they always have the camera pointed the other way. I appreciate that a lot! This will be very helpful on the 3DS as well. I heard some people cut a plastic straw very short and put it through the opening, to pass the cables through easier. The metal ring can at times cut the ribbon cables. I can attest to that. I tried it on some broken DSi/3DS systems i bought for myself and easily ripped the cables. Be very gentle and take your time with them!
well, it's an old video, I know, but if you pull out the LED channels (the bit that has the power, charging, and wifi LEDs), you can just push the hinge pin out, instead of pulling it and risking damage.
@@hakimdurand8427 it's probably not relevant anymore, but they meant the other side, the one without the ribbon cable: Instead of pulling the black bit (responsible for holding the top half in 160 and 180 degrees) with a screw driver, one can just push it in after removing the LED light tunnel bit,
So my dsi top screen was fading to white i could still see it but the colors are lighter and was worried it would black out and need to know what part is having a problem from watching this video and taking it apart again the screen is better but is a tiny bit dull.
Do you know if dsi needs all components to power on? someone gave me a broken dsi with the top part hanging down from the two cables, screen ribbon cable and camera module cable (i dont know if ribbon cable is the correct term). The ribbon cables are completly destroyed. I can replace the screen and the shell easily but i cant find the camera module ribbon cable anywhere but ebay or alliexpress. Is it necessary to have the camera module working for the dsi to boot up? i realy dont care if the cameras are working.
Great guide! Thank you very much! Those ribbon cables are the devil. Such a relief to have it all back together and working :) Keep up the good work and thanks again :)
great skills !!! did you ever have the following issue on ndsl . power switch ok fuses f1 f2 ok top screen ok green light but no picture at all on low lcd ??? i thank you all in advance.
could a scratch ribbon cause the top screen of a nintendo to show hardly any color but white? like you could still see the figures but its like there is no black or color just white like its very bright....
Hi There. Can you explain how to fix DSi. When i plug in power supply it show oragne light for few sec. After nothing start up. Can you provide solution what is problem and how to fix it. Thank you
thank you I just follow your videoguide and I was able to replace the top upper lcd, Im the worse at electronics repair but I was able to follow your video and make a nice replace job .
I have an error on the screen above my Nintendo DSI, white lines have appeared and more and more are appearing .. are already covering a 1/8 of the screen .. what can I do?
@Ashfly No. The problem is that the silver coating is a thick, scratch resistant Finish. I can't penetrate a layer of that silver. It's like really hard and it's like a foil type paper,but extremely thick. I tried everything so far. Nothing. Not a budge.
Hi, my DSi upper screen is showing up white lines. Started at the bottom and is slowly filling up the screen the more I use it. The bottom screen is fine tho. Any idea what is wrong? Thanks in advance for any help. ;-)
well just my luck after i did so . i went to power on my dsi and it will not start up. i plugged it in to the charger and i see a flash in yellow light? did i mess up/ any on i need help??????
The Nintendo Repair Shop is now Retro Video Game Repair. Please update your bookmarks to change www.nintendorepairshop.com to www.retro-video-game-repair.com
![[UNCUT] เก็บ "สจ.โต้ง" เอี่ยวมาเฟีย รู้ตัวคนบงการ ก่อนสั่งลั่นไก I คนดังนั่งเคลียร์ I 13 ธ.ค.67](http://i.ytimg.com/vi/o-J_p62D40w/mqdefault.jpg)
Thank you so much! Used this to swap the working screen of a water damaged DSI with a broken top screen DSI. Struggled for 3 hours with an IFixIt guide, but found your video and managed to finish up quickly! :D
This is some pretty interesting stuff. Is this footage of a repair for a DSi that a customer sent in? Also, you guys should invest in a higher definition camera that captures in 1080p for better detail.
Thanks for the video! You did a great job! I like how you showed us how you rolled the ribbon cables together. I have hardly found anyone who shows this part because they always have the camera pointed the other way. I appreciate that a lot! This will be very helpful on the 3DS as well. I heard some people cut a plastic straw very short and put it through the opening, to pass the cables through easier. The metal ring can at times cut the ribbon cables. I can attest to that. I tried it on some broken DSi/3DS systems i bought for myself and easily ripped the cables. Be very gentle and take your time with them!
well, it's an old video, I know, but if you pull out the LED channels (the bit that has the power, charging, and wifi LEDs), you can just push the hinge pin out, instead of pulling it and risking damage.
Can you explain this a bit. Just ruined my screens ribbon and bought a new one just now so I want as much tips as possible...
@@hakimdurand8427 it's probably not relevant anymore, but they meant the other side, the one without the ribbon cable: Instead of pulling the black bit (responsible for holding the top half in 160 and 180 degrees) with a screw driver, one can just push it in after removing the LED light tunnel bit,
So my dsi top screen was fading to white i could still see it but the colors are lighter and was worried it would black out and need to know what part is having a problem from watching this video and taking it apart again the screen is better but is a tiny bit dull.
my dsi has no damage to the hinge but still does this does that mean I can just reconnect the screens ribbon cable
Do you know if dsi needs all components to power on? someone gave me a broken dsi with the top part hanging down from the two cables, screen ribbon cable and camera module cable (i dont know if ribbon cable is the correct term). The ribbon cables are completly destroyed. I can replace the screen and the shell easily but i cant find the camera module ribbon cable anywhere but ebay or alliexpress. Is it necessary to have the camera module working for the dsi to boot up? i realy dont care if the cameras are working.
Great guide! Thank you very much! Those ribbon cables are the devil. Such a relief to have it all back together and working :) Keep up the good work and thanks again :)
great skills !!! did you ever have the following issue on ndsl . power
switch ok fuses f1 f2 ok top screen ok green light but no picture at all
on low lcd ??? i thank you all in advance.
could a scratch ribbon cause the top screen of a nintendo to show hardly any color but white? like you could still see the figures but its like there is no black or color just white like its very bright....
I scratched my top screen and it stopped working and I’m going to try and fix it
I have a Nintendo, DSI and I have the same problem. It’s just broken from the corner where the light does it turn on
Is There Any Way I Can Fix My DSI's Bottom Screen Calibration? Im having huge problems w/ the top left corner area.
Hi There. Can you explain how to fix DSi. When i plug in power supply it show oragne light for few sec. After nothing start up. Can you provide solution what is problem and how to fix it. Thank you
Fantastic guide! Definitely going to check back for future repairs
One of my screws on the back of my dsi is corrupted and my screwdriver won't do anything please haelp :(
thank you I just follow your videoguide and I was able to replace the top upper lcd, Im the worse at electronics repair but I was able to follow your video and make a nice replace job .
What happens if you take the battery out?
my screws are jammed, idk what they did with em but i can't even get the first 5 after the battery out
You are Master Of The Nintendo
18:00 is exactly there I messed everything up... I tiny torn made spend £9.00 in a new screen...lol
Mine got ripped without me knowing... I spun it around too much...lol had the dang dsi for couple hours haha
Thanks... I think
I have an error on the screen above my Nintendo DSI, white lines have appeared and more and more are appearing .. are already covering a 1/8 of the screen .. what can I do?
removal without soldering????????????
My 4 screws for the top half are covered with a silver like wrap. I can't unscrew them.
@Ashfly No. The problem is that the silver coating is a thick, scratch resistant Finish. I can't penetrate a layer of that silver. It's like really hard and it's like a foil type paper,but extremely thick. I tried everything so far. Nothing. Not a budge.
@Ashfly I'll try that.
I do not want to repair it, but I want to know how I can use it as a gameboy, without the top screen. :D
you explained the axel removal step extremely poorly. ive rewatched the segment 5 times and still dont know how it works
can i have a transcript
Can he fix my pokemon white dsi plzzzz
Hi, my DSi upper screen is showing up white lines. Started at the bottom and is slowly filling up the screen the more I use it. The bottom screen is fine tho. Any idea what is wrong? Thanks in advance for any help. ;-)
That are pixel errors they spread on ur screen! U have to replace it if u dont it can make minor damage to ur ds i any time soon
well just my luck after i did so
. i went to power on my dsi and it will not start up. i plugged it in to the charger and i see a flash in yellow light? did i mess up/ any on i need help??????
When you plug in the charger and get a quick orange flash (some people might call this yellow), you probably blew a fuse.
The Nintendo Repair Shop is now Retro Video Game Repair. Please update your bookmarks to change www.nintendorepairshop.com to www.retro-video-game-repair.com
Why have I never heard of you guys?!
Muito obrigado consegui arrumar meu dsi !!!!
Gracias ► ! ! !
This happens to my dsi that my sister gave to me
I swear the idiot who made this needed to be fired... I just ruined my top screen (somehow) after putting mine all back together ffs..
This is pretty tricky