Thank you so much for this video! You saved me from paying almost $200 for repairs at a local shop that didn't even know if they could fix my computer. Once my new screen and kit arrived it took me less than an hour to replace the screen. It probably would've taken a day or more if I took it to the shop. Again, thank you!!!! My new screen looks even prettier than my original!
Bro, Today dell technician changed my laptop display screen. But the brightness is not as before. Brightness is less in this. Is it common or the screen is fake?
Do you know where I could find the specific number of the screen other than on the back of it since I am trying to buy a controller board and don’t want to tear the whole thing down.
So I've been researching about this kind of stuff because my GL552VW came with a TN panel mounted (even if the site I bought it at stated it was IPS) and I was looking to change it myself manually. So my question is, ¿Will an IPS screen work fine if the original that came is TN? ¿Is the one you guys sell IPS? Thanks in advance for the answer.
Heh, I'm contemplating doing that the exact same thing! The viewing angles and contrast are horrible. Everything's too washed out and I can barely move my face relative to the screen.
I just did change the LCD panel ... I fiddled a lot trying to reconnect the 30-pin and might have bended a pin since the New AND the Old Cracked LCD now display ... Nothing ... From experience is it possible that I pulled the screen a little too much forward and loosened/disconnected a connector on the On-Board side of the EDP cable ? Or since it took more force to pull the conector out that I expected that I damaged the Cable Connector ? the GL753VE is workin properly with External Monitor and both the Intel 630 and GE FORCE 1050 TI seem to work fine according to Task manager Performance graphics ... Also I did operate with the battery on since on the GL753 disconnecting the battery need extensive disaassembly ... A major disgn flaw IMO for an otherwise rather good Laptop ... The power button also is badly as a the upper right kwy over the numeric keypad... protruding instead of flush with the body like on Thinkpad and Lenovo ... So you can EASILY accidentally press it while putting the screen falt on the keyboard ... And THANKS for a great How-To video ... 2 Hinge Covers, 6 screws , a bezel and a 30-pin connector is indeed a very simple job ...
You only really need a PH#0 and a guitar pick to act as a spudger. No unsightly scratches this way, I don't think the clips were held with adhesive on hers, or something.
hope you still see this but my screen is flickering a lot when and it sometimes works when i flip the screen back and forth. how would you know if the problem is the cable or the screen? if its the cable, what model should i buy? same for the screen?
can you help me i have acer predator helios 300 it comes with 15.6 (30 pin 2epd connector) dull color and dim max brightness I want to replace its screen to some good color and bright screen plse suggest me some good compatible screeens
The European model comes with a shitty tn panel, I looking for alternatives as im doing photography and need an accurate screen on vacations. Maybe a brighter ips screen. I doubt 4k is available for this model
This is so stupid, you're ruining the case scratching it up with a sharp knife. Sharpen the edge of an old credit card and use that, or some kind of thin plastic.
Thank you so much for this video! You saved me from paying almost $200 for repairs at a local shop that didn't even know if they could fix my computer. Once my new screen and kit arrived it took me less than an hour to replace the screen. It probably would've taken a day or more if I took it to the shop. Again, thank you!!!! My new screen looks even prettier than my original!
Problem solved. Thank you for this step by step video. The only difficulty I had was getting the bottom part PVC the bezel re-attached.
hey man! THANK YOU SO MUCH!!! YOU SAVED ME 300$ I got my replacement and followed this video! And it's a clean install! thank you again!!!
Thanks for the informative video. Saved me time and money with computer store. Didn't realize it would be this easy.
Bro, Today dell technician changed my laptop display screen. But the brightness is not as before. Brightness is less in this. Is it common or the screen is fake?
bravo, just a question please: is same procedure for Asus Gaming Rogue GL553VE please? thank you
Thank you. Fairly simple and well described procedure.
Would the laptop still work with a removed screen?
I just ordered from you off Amazon lol. Thanks for the helpful video as well!
Do you know where I could find the specific number of the screen other than on the back of it since I am trying to buy a controller board and don’t want to tear the whole thing down.
Is the lcd cable in there? Was it what you unplugged from the screen?
So I've been researching about this kind of stuff because my GL552VW came with a TN panel mounted (even if the site I bought it at stated it was IPS) and I was looking to change it myself manually.
So my question is, ¿Will an IPS screen work fine if the original that came is TN? ¿Is the one you guys sell IPS?
Thanks in advance for the answer.
Heh, I'm contemplating doing that the exact same thing! The viewing angles and contrast are horrible. Everything's too washed out and I can barely move my face relative to the screen.
Hello! Have you tried to change the panel in the end? I have the same problem with that horrible TN display
I replaced mine with an IPS last month , it's a huge upgrade compared to the old TN and it works perfectly !
Update: I've just replaced the horrible TN panel with an IPS an work perfectly
Thanks, I totally confirm!
I just did change the LCD panel ... I fiddled a lot trying to reconnect the 30-pin and might have bended a pin since the New AND the Old Cracked LCD now display ... Nothing ... From experience is it possible that I pulled the screen a little too much forward and loosened/disconnected a connector on the On-Board side of the EDP cable ? Or since it took more force to pull the conector out that I expected that I damaged the Cable Connector ?
the GL753VE is workin properly with External Monitor and both the Intel 630 and GE FORCE 1050 TI seem to work fine according to Task manager Performance graphics ... Also I did operate with the battery on since on the GL753 disconnecting the battery need extensive disaassembly ... A major disgn flaw IMO for an otherwise rather good Laptop ... The power button also is badly as a the upper right kwy over the numeric keypad... protruding instead of flush with the body like on Thinkpad and Lenovo ... So you can EASILY accidentally press it while putting the screen falt on the keyboard ...
And THANKS for a great How-To video ... 2 Hinge Covers, 6 screws , a bezel and a 30-pin connector is indeed a very simple job ...
can i do this without breaking the hinge covers? are they broken if i do this?
i would be happy if som1 help me :)
Какая цена матрицы?
Hello, I have a GL-553VE and I need to replace the bezel which cracked - the screen is ok. Are the hinge covers the same as for GL552?
thank you so so much for this video. helped me feel confident in performing this replacement with ease and in minutes. life saver! much appreciation
ya'll still doing this? I ask since it's been a while since the upload.
I’m about o do it
You only really need a PH#0 and a guitar pick to act as a spudger. No unsightly scratches this way, I don't think the clips were held with adhesive on hers, or something.
Is the serial number on the back of your screen that you have disconnected the same as the serial number of the laptop?
Thanks for helping to replace laptop screen.
hope you still see this but my screen is flickering a lot when and it sometimes works when i flip the screen back and forth. how would you know if the problem is the cable or the screen? if its the cable, what model should i buy? same for the screen?
You can check for disassembling this model at this link :
th-cam.com/video/e6X1MuETMmY/w-d-xo.html
Hi, Is the process the same for the GL502VS?
I have a problem with a screen frame during open has crack sound and jumping out
What an awesome vid, and from the looks of it, service! Couldn't buy anything from ya though, cause I'm running a ZX50VW
Thanks for being helpful tho!
could i replace a hd screen on a laptop with a 4k screen?
if your gpu/igpu supports the resolution, yes
Replace it with a AUO b156htn05.2 it's a good 120hz option that works great.
Can i replace the original screen with a high refreshrate one?
Yes
Google gl552vw 120hz you'll see the swap that I did.
can you help me i have acer predator helios 300 it comes with 15.6 (30 pin 2epd connector) dull color and dim max brightness
I want to replace its screen to some good color and bright screen
plse suggest me some good compatible screeens
Tech Hub b
I'm really having the hard times moving the hinge..
I had too, you just gotta use a bit of bruteforce when you kinda popped them the first time, since theyre just hangung there a little
The European model comes with a shitty tn panel, I looking for alternatives as im doing photography and need an accurate screen on vacations. Maybe a brighter ips screen. I doubt 4k is available for this model
Pines???
3:00 vandalism detected
help! I broke the ribbon connector at motherboard, what now?
Athaariq Ardiansyah please check eBay for replacement cable
not the ribbon cable sir, but the connector clip
@@KangJangkrik ame thing. check ebay
@@KangJangkrik i think i too xd it isnt fixed. on ebay it costs 9€ i think.. im very late but can you explain me how u do this
@@k0ns491 tell me 🙏
I hate my gl552vx because TN, coz I always used IPS in my entire life except CRT
switch the display :) found 1 on ebay for 39 founds
This is so stupid, you're ruining the case scratching it up with a sharp knife. Sharpen the edge of an old credit card and use that, or some kind of thin plastic.
A C usually plastic tools aren't strong enough and thin enough to open up the bezel, so that's why we use metal tools. It's a trade off.