HSRP (Hot Standby Router Protocol) Configuration In Packettracer | Networking Academy |
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- The Hot Standby Router Protocol (HSRP) is an IP routing redundancy protocol designed to allow for transparent failover at the first-hop IP router. HSRP provides high network availability, because it routes IP traffic from hosts on networks without relying on the availability of any single router.
Background Music Credits: Unknown - SergePavkinMusic
#Networking #NetworkAcademy #Academy #CCNA #CCNP #CCIE #Cisco #NetworkeNgineers #Ciscopackettracer #PacketTracer #CLICommands
#Basiccommands #CiscoIOSCommands #DHCP #DHCPConfiguration #Packetrtracer #CiscoRouter #CiscoServer #PacketTracer #CCNA #CCNP #Ciscocommands #Network #Codings #hsrp #vrrp #hotstandby
If you have successfully configured the HSRP protocol, Mention it in the comment section. Thank you NA Family ❤❤❤
Supper video thank you
Welcome 😊
Wow it have been configured successfully
Thank you!!!
Glad it helped, Thank you for watching our contents
@@NetworkingAcademy1 You are welcome on:
@arnaudtv1
Thank you this video very helpful for me ☺️
Glad it was helpful!
very nice explain
Keep watching
This video cleared all my doubt, thanks NA.
Glad it helped
Merci
Heureux que cela vous ait aidé.
Thank you!
Welcome
What is the command for decrement priority value if destinations port was down state that's time for path change?
If the primary router fails, the protocol will automatically connect to the router assigned the next-highest priority.
------------------------------------------------------------------------------
(Config)#Int Gig 0/0
(Config)#Standby 1 priority 120.
Illustration for above configuration:
(Config)#Standby ___ (any group number) | priority ____ (Value that you need to assign).
-----------------------------------------------------------------------------
But i think to change path, you need to increase the next priority level for that path.