hi Jeff.... i like doing the detail on these engines... once you figure out were the spark plugs holes need to be the rest is easy... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Hey Vinny, gasser is looking good, I glued the wheels together after I make the fit , I sand it on the inside so I don’t sand off the bead of the rim, thanks for sharing
hi Slow ride....thx 4 your kind words & i appreciate your input about the wheels... more updates coming... thx 4 stopping by & leaving a comment.. vinny
hello Tom... so far so good.... this kit was pretty easy.. no fit issues... almost put itself together... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Good morning Vinny. I do same as you. I file down then glue. I also spend a lot of time swapping from parts box fit. My main goal is to not have outer rim gaps.
hi Smith... thx 4 your input about the wheels... i'm still building a scrap box... more updates coming... thx 4 stopping by & leaving a comment.. vinny
hi Jimmy... to me ...it make sense to have the radius rods/arm to stabilize the axel .... anyhow... more updates coming... thx 4 stopping by & leaving a comment.. vinny
I always glue the wheel halves together. I recently finished an off-road truck model that has a serious problem where the tires fit too loosely on the wheels, and come loose. I boxed the model and put in the "pile of shame". Might bring it back out if I find a decent set of offroad wheels and tires. 🥺
hi Lance... thx for your input on the wheels.... sorry about your off road build....you should give it a second chance... more updates coming... thx 4 stopping by & leaving a comment.. vinny
For rims that don't fit well in a tire I will sand the chrome down around the inside circumference staying away from the outer lip until they fit well. I will sand the back sides of the wheel to remove the chrome and glue that to the inner rear portion of the rim. I also sand the outside of the tire so they look worn and used.
hello Brian... thx 4 your input on the wheels... i have not attempted weathering the tires yet...but on my thigs to do list.. more updates coming... thx 4 stopping by & leaving a comment.. vinny
hi Ron... these 2 kit are the easiest i have done so far...& they are looking good (In my humble opinion)...thx 4 stopping by & leaving a comment.. vinny
Nice kit. Thanks for the update. You going to get so many built you will have to remove some of the trains and make a.model room sir. Are you still building the train layout.
hi David.... at this point i'm still thinking about my layout... if i keep it it will be a total rebuild... more updates coming... thx 4 stopping by & leaving a comment.. vinny
hi Jeff... i think i emailed you back...so far this kit is pretty easy.. no issues... more updates coming... thx 4 stopping by & leaving a comment.. vinny
hi Dutch...that's awesome 2 kits in 4 days & i believe this kit & the next one are in that same can be done in the same time ...more updates coming... thx 4 stopping by & leaving a comment.. vinny
Nice progress Vinny. Thanks for sharing.
thx 4 stopping by & leaving a comment.. vinny
Hi Vinny, That engine looks great. I really like that wiring. Thanks for sharing, Have a great day. Jeff
hi Jeff.... i like doing the detail on these engines... once you figure out were the spark plugs holes need to be the rest is easy... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Very nice.
hi Marcelo.... thx 4 stopping by & leaving a comment... Vinny... BTW i did get your email...
looking really good Vinny and congratulations on the airbrush win from woody's
Hi buddy...I need your mailing address
You won on my give away
@@dacuzzz6951 ok i hope I have the right email address going to send it to you and thank you alot.
Looking good, Vinny!!
hi Link....it's getting there... stay tuned for more updates... thx 4 stopping by & leaving a comment.. vinny
Looking really sharp Vinny!
hi Tim... so far so good... more update coming.. thx 4 watching & your comment.. vinny
Hey Vinny, gasser is looking good, I glued the wheels together after I make the fit , I sand it on the inside so I don’t sand off the bead of the rim, thanks for sharing
hi Slow ride....thx 4 your kind words & i appreciate your input about the wheels... more updates coming... thx 4 stopping by & leaving a comment.. vinny
That's some really nice work Vinny well done marra . Regards Gav.
hi Gavin....i do appreciate your kind words... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Nice update Vinny!! That’s looking great.
hi Kyle... i appreciate your kind words...thx 4 stopping by & leaving a comment.. vinny
@@dacuzzz6951 you’re welcome!! I’m trying to keep up with you!! It’s tough. lol!! Hope you’ve had a great weekend
I do sand if there's too much space, and I always glue.
The engine is lookin really rad!
hi John...thx 4 you input... i'm really liking the detail that you can do on a engine...thx 4 stopping by & leaving a comment.. vinny
Looking good!
hi Dwight... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Looking good buddy
hello Tom... so far so good.... this kit was pretty easy.. no fit issues... almost put itself together... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Great progress, Vinny!
hi Will... it's getting there... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Lookin good Vinny,
Nice work brother 👊🏻
hi Mike... i'm having fun with this build...thx 4 doing this GB... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Good morning Vinny. I do same as you. I file down then glue. I also spend a lot of time swapping from parts box fit. My main goal is to not have outer rim gaps.
hi Smith... thx 4 your input about the wheels... i'm still building a scrap box... more updates coming... thx 4 stopping by & leaving a comment.. vinny
The magneto is a nice touch. I don't remember straight axles having radius arms back then, they were mounted to leaf springs....very strong.
hi Jimmy... to me ...it make sense to have the radius rods/arm to stabilize the axel .... anyhow... more updates coming... thx 4 stopping by & leaving a comment.. vinny
I always glue the wheel halves together. I recently finished an off-road truck model that has a serious problem where the tires fit too loosely on the wheels, and come loose. I boxed the model and put in the "pile of shame". Might bring it back out if I find a decent set of offroad wheels and tires. 🥺
hi Lance... thx for your input on the wheels.... sorry about your off road build....you should give it a second chance... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Have a great build.
Looking good Vinny!
i appreciate you stopping by & commenting.. vinny
For rims that don't fit well in a tire I will sand the chrome down around the inside circumference staying away from the outer lip until they fit well. I will sand the back sides of the wheel to remove the chrome and glue that to the inner rear portion of the rim.
I also sand the outside of the tire so they look worn and used.
hello Brian... thx 4 your input on the wheels... i have not attempted weathering the tires yet...but on my thigs to do list.. more updates coming... thx 4 stopping by & leaving a comment.. vinny
Looking Good Vinny!!
😊👍
I liked the easy kits when I did them as a kid, I still do. Have a good week.
hi Ron... these 2 kit are the easiest i have done so far...& they are looking good (In my humble opinion)...thx 4 stopping by & leaving a comment.. vinny
Thats a cool lo0king car.
he Pedro.... building these cars brings back memories... thx 4 stopping by & leaving a comment.. vinny
Nice kit. Thanks for the update. You going to get so many built you will have to remove some of the trains and make a.model room sir. Are you still building the train layout.
hi David.... at this point i'm still thinking about my layout... if i keep it it will be a total rebuild... more updates coming... thx 4 stopping by & leaving a comment.. vinny
Nice 😊 when are you going back to trains?
hi John... if i decide to continue with my layout it won't be till next year... thx 4 stopping by & leaving a comment.. vinny
Looking great Vinny........did you get my email from your last video?
hi Jeff... i think i emailed you back...so far this kit is pretty easy.. no issues... more updates coming... thx 4 stopping by & leaving a comment.. vinny
They did a bunch of awb kits that share parts with that one nova, nova wagon,cuda, Corsair, tempest. Falcon cutlass etc
hi my friend.... thx 4 your input on the wheels.... thx 4 stopping by & leaving a comment.. vinny
I built my Chevy Chevelle and my Chevy II nova in four days. The paint took the longest,except my engine came with the belt and pulley’s???
hi Dutch...that's awesome 2 kits in 4 days & i believe this kit & the next one are in that same can be done in the same time ...more updates coming... thx 4 stopping by & leaving a comment.. vinny
Looking good!
hi Dave.... more updates coming... thx 4 stopping by & leaving a comment.. vinny