I am the opposite. After operating digital equipment for a long time, he switched to letterpress printing. It is rare in Korea, so I think it can be improved.
Quanto mais assisto seus vídeos, mais impressionado eu fico. Simplesmente sensacional. Esta impressora do vídeo, e moderna ou antiga em perfeitas condições? Parabéns pelo excelente trabalho!
Nice to meet you. Most of my equipment is from 100 years ago. Most of the big ones were restored by me, and the smaller tabletops were restored and brought from the USA. Thank you very much.
hello, excellent card, a piece of art.. is the letterpress machine a desktop version ..?? what do u call this small machine otherwise..?? also which card paper did you used, where the texture can be felt.
Nice to meet you. A small piece of equipment called a tabletop is a Hohner6.5x10 German piece. It is a clone version of US pilot equipment. And the paper used here is cushion paper. Japanese paper.
Hi! Greetings from Australia 🇦🇺 I was wondering if you could link me to the place you ordered your letter press machine from? There’s barely any here :( Also, was it brand new?
Nice to meet you. There is no other machine vendor. It was difficult to purchase from a place that closed the studio in the United States through a Google search. The machines are usually machines that were produced 100 years ago and are not produced now. There is no new equipment.
The board to which the board is attached was calculated in the form of board height + board height = roller rail and made a similar value. Each device is slightly different. There are no exact standards. However, considering the standard height of type, it is almost correct when calculating it as 23.25mm.
The paper used here is called Gmund Cotton Max White. It is 100% cotton paper. It is the paper with the best printability among letterpress papers. The country of manufacture is Germany.
I mainly print with an emphasis on depth. In the case of the resin plate, I think the height of the relief is a little low for the sense of depth. Of course, there are resin plates that can give you a lot of depth, but it is difficult to obtain in Korea. But the printing is good. I mainly use zinc plate a lot. It is well expressed on detailed and thin prints.
Nice to meet you. sorry. I am not the one who sells the machine. I bought the equipment mainly in the United States. I bought it as used through a Google search. This is South Korea.
Nice to meet you. Chandler&price 10x15 and hohner6.5x10 equipment. Chandler&price is an American equipment, and the hohner equipment is made in Germany with slight modifications to the American equipment drawings. If you want to buy a machine, I think it would be good to find out in the US through a search😄😄
Hi, I really like to learn how I can do this, There is anyway I can contact you guys? I do printing but I think what you are doing is more fun for me, is something different. Please let me know Thanks
nice to meet you. I can't say anything because the scope to teach is wide. Here is Korea. English is about responding using a Google translator. Contact information is www.print89.com.
Thank you for your inquiries. International orders are still difficult. I think it's hard because there are difficulties in explanation and payment. Sorry.
Most beautiful business card I have seen...... you have convinced me to get back into letterpress printing!
Thank you very much. We support you.😊😊
It's a shame but too many "printing companies" only have laser printing... Letter press men are becoming an extinct species.
I am the opposite. After operating digital equipment for a long time, he switched to letterpress printing. It is rare in Korea, so I think it can be improved.
I love every step and detail in this process. The machine itself is an art piece, and I can feel the texture of the card just by watching ❤️
nice to meet you. Thank you very much for your compliments and interest.😅😅😅
I have to agree w/ you 100% - the whirling and spinning and grabbing and placing and lifting and setting it down somewhere else. Fascinating stuff.
Quanto mais assisto seus vídeos, mais impressionado eu fico. Simplesmente sensacional. Esta impressora do vídeo, e moderna ou antiga em perfeitas condições? Parabéns pelo excelente trabalho!
Nice to meet you. Most of my equipment is from 100 years ago. Most of the big ones were restored by me, and the smaller tabletops were restored and brought from the USA. Thank you very much.
너무 이쁜 디자인이네요~^^ 제꺼도 기대되요
감사합니다. 예쁘게 만들어 드릴께요 😊😊
It's art of Magic! Fantastic device in modern digital world...
Thank you very much 😊
Hello!
Very beautiful video. And what material is the plate on which the cliche is attached?
Thank you for watching. Base plate is bakelite.
The printing plate is magnesium 2mm.
Amazing! You deserve way more followers!
Thank you very much 😄😄😄
Satisfactory video ❤
Thank you :)
Look at the tasteful thickness of this card Pete Bateman. How does that make you feel ?
Nice to meet you. I feel joy and healing when making it.
원데이 클래스도 한번 들어보고싶네요!! 이번 명함도 예쁘게 부탁 드립니다^^
감사합니다. 예쁘게 만들어 드릴께요😄😄
hello,
excellent card, a piece of art..
is the letterpress machine a desktop version ..?? what do u call this small machine otherwise..??
also which card paper did you used, where the texture can be felt.
Nice to meet you. A small piece of equipment called a tabletop is a Hohner6.5x10 German piece. It is a clone version of US pilot equipment. And the paper used here is cushion paper. Japanese paper.
outstanding work....
AMAZING! So nice of you!
Thank you very much 😄😄
정성입니다~정말 기대되네요^^
감사합니다.^^
I enjoy your videos. What adhesive do you use to get your metal engraving plates to stick to the platen?
Hello, I'm using double-sided tape. www.kuill.co.kr/kuill.htm Purchase and use here.
Wonderful work, thoroughly enjoyed the whole process. What are the letterpress names of your machines please?
Magnesium plate. Thank you 😊😊
Hi! Greetings from Australia 🇦🇺
I was wondering if you could link me to the place you ordered your letter press machine from? There’s barely any here :( Also, was it brand new?
Nice to meet you. There is no other machine vendor. It was difficult to purchase from a place that closed the studio in the United States through a Google search. The machines are usually machines that were produced 100 years ago and are not produced now. There is no new equipment.
Que trabajos tan bonitos, es un arte
Thank you so much🙂
What is the thickness of the backing board on which plate is fixed?
The board to which the board is attached was calculated in the form of board height + board height = roller rail and made a similar value. Each device is slightly different. There are no exact standards. However, considering the standard height of type, it is almost correct when calculating it as 23.25mm.
한국에 이렇게 멋진 인쇄를 할 수 있는 곳이 있다는게 정말 멋진 것 같아요 ^^ 기대됩니다!
감사합니다.예쁘게 만들어 드릴께요 😄😄😄
Beautiful 🥰
Thank you very much 😊
What kind of paper is this or which do u recommend
The paper used here is called Gmund Cotton Max White. It is 100% cotton paper. It is the paper with the best printability among letterpress papers.
The country of manufacture is Germany.
Waltzdesign Hello. What is your opinion on photopolymer plates ?
I mainly print with an emphasis on depth. In the case of the resin plate, I think the height of the relief is a little low for the sense of depth. Of course, there are resin plates that can give you a lot of depth, but it is difficult to obtain in Korea. But the printing is good. I mainly use zinc plate a lot. It is well expressed on detailed and thin prints.
@@w_letterpress Ok thank you
Excellent, what is the brand of the machine please
Nice to meet you. Among the equipment used, the big one is Chandler&price 10x15 and the small one is Honer 6.5x10.
What model is the manual machine
This is Chandler&price 10x15.
Amazing Work
can i order the machine ?
Nice to meet you. sorry. I am not the one who sells the machine. I bought the equipment mainly in the United States. I bought it as used through a Google search. This is South Korea.
May I know what letterpress machine is that?
Nice to meet you. Chandler&price 10x15 and hohner6.5x10 equipment. Chandler&price is an American equipment, and the hohner equipment is made in Germany with slight modifications to the American equipment drawings. If you want to buy a machine, I think it would be good to find out in the US through a search😄😄
@@w_letterpress thank you very much for sharing. Appreciate it. I enjoy watching your videos.
Thank you very much 🤩🤩😍😍😄😄😄
woow amazing, memories with Heidelberg ;)
😅Thank you very much :)
Hi, I really like to learn how I can do this, There is anyway I can contact you guys? I do printing but I think what you are doing is more fun for me, is something different. Please let me know Thanks
nice to meet you. I can't say anything because the scope to teach is wide. Here is Korea. English is about responding using a Google translator. Contact information is www.print89.com.
can you tell mee what brand of machine is i realy like to bye one is 👌🏻
The big machine is Chandler & Price 10x15 and the original is the United States. The small scale is Honeer 6.5x10. The country of origin is Germany.
waltzdesign thank you 🙏🏼
Hello, how can I place an order with you?
Thank you for your inquiries. International orders are still difficult. I think it's hard because there are difficulties in explanation and payment. Sorry.
I want to make business card like this. What is the price?
Nice to meet you. Send your design to my email. I'll look at it and give you a quote.
Thanks :)
Please give me your email address.
waltz@print89.com 😅😅
마그네슘판 두께 몇 mm 인지 여쭤봐도 될까요?
안녕하세요. 2mm입니다.
Perfect
Thank you very much.😅😅
so scary to put your hands under that paper cutter
Thank you for your concern. I am always working carefully.😅😅
🔥🔥🔥🔥🔥🔥
😅😅😅😅
jukebox bring me here
Thank you😅😅
same to you...
@@rafatpasa2087 😄😄😄
That shit has to be so boring dude, how do you do this every day...
fine. I do it because I like it. Thanks for your worries.