One more thing to add. First let me say I do really like your product, so far. It’s very sturdy, well made, and good looking. This comment is a continuation of the pitfalls during installation. Today I went back to adjust the door toward the drivers side. It was tight on the passenger side. That said, I saw no way to remove the passenger taillight while the tailgate reinforcement was installed. Due to the door tab stops, I had to remove the whole thing in order to remove the taillight.
Great video - thank you for tbe runthrough of the hinge and striker adjistments. I got to dial it in after over a year of being dissatisfied with my factory alignment.
This may be year specific (I have a 2021) but the T47 torx did not fit, it was a T45, and there wasn’t anything that needed the 16mm socket. It was a 13mm socket that was used mostly everywhere. You also left off the need for a hex wrench to put the tire mount back on. Also, a little tape helped to hold the bushings in when mounting the reinforcement to the hinge mounts, or another pair of hands. Really should point that out too.
Yes! Check out this video on installing our tail light guards, It will show exactly how to remove the tail light. th-cam.com/video/pUL0ym6AV_8/w-d-xo.html
One more thing to add. First let me say I do really like your product, so far. It’s very sturdy, well made, and good looking. This comment is a continuation of the pitfalls during installation. Today I went back to adjust the door toward the drivers side. It was tight on the passenger side. That said, I saw no way to remove the passenger taillight while the tailgate reinforcement was installed. Due to the door tab stops, I had to remove the whole thing in order to remove the taillight.
Great video - thank you for tbe runthrough of the hinge and striker adjistments. I got to dial it in after over a year of being dissatisfied with my factory alignment.
This may be year specific (I have a 2021) but the T47 torx did not fit, it was a T45, and there wasn’t anything that needed the 16mm socket. It was a 13mm socket that was used mostly everywhere. You also left off the need for a hex wrench to put the tire mount back on.
Also, a little tape helped to hold the bushings in when mounting the reinforcement to the hinge mounts, or another pair of hands. Really should point that out too.
Do you have a video on how to remove the passenger tail light? My tailgate is a bit tight on the right side.
Yes! Check out this video on installing our tail light guards, It will show exactly how to remove the tail light. th-cam.com/video/pUL0ym6AV_8/w-d-xo.html
How long is the camera shaft?