Those are the wheels right there. They are so badass!!! I am in love with them!! I would put those on my Porsche!!! This car is so awesome and brings back so many memories from high school and the start of college!!! One of my favorites of your builds!!!
I know you don't want make a 10 videos series about the paint job, but I going to give you two reason: You are a great entertainer😅... and second we want to see all the process. May be a fast foward video with a background explanation.... Great job! I really enjoy this build from the beginning. F100 1953 and this one are my top 🔥
As a Scottish native, we appreciate hondas big time. Big 'murican v8s aren't quite accepted as much, but damn Casey, you made by far the Daddy of all custom crx'S . Hands down. The full journey has been awesome and gained another subscriber. You set the standard high man. Big appreciation and respect for you and your old mans love n dedication. Keep inspiring. Kudo's for adopting the cat. It pays off man
Hey man was watching your video here in Canada noticed your diesel heater smoking If you use a gallon of gas and four gallons of diesel mixed you won’t get smoke Burns like kerosene. Nice work Take it easy
Canadian here as well, been on winter construction sites for years and we always mix gas into them to reduce smell and smoke. You can run 50/50 with no problems
@@CaseysCustoms use some wind screen sealant to affix it at the back, conter sink some holes in the fibreglass and drill holes and pop rivet from the outside then just skim it with some fibre bog over the pop rivet/holes 😎
God almighty!! Casey, even without paint, that car is so sick!!🔥🔥🔥🔥🔥🔥 The wheels looks so ridiculously big, that at the same time, it brings the whole build to perfection! You need to keep this car forever! I hope you build the AE86 as great as this one. Love it!!!!
This is coming together so well and the wheels look insane. Excited to see some of the paint progress but really hoping to see some interior work. This thing deserves a sorted interior.
Those are the wheels right there. They are so badass!!! I am in love with them!! I would put those on my Porsche!!! This car is so awesome and brings back so many memories from high school and the start of college!!! One of my favorites of your builds!!! I just looked. My car has 20" wheels that are 10.5" wide. I'm running a 275x30 on it and there is no way it's 25" tall!! I don't understand your tire guy!!
The wheels look sick!!! Are they directional? Looks like the rear one belongs on the other side. Keep up the good work can’t wait to see the finished product. 🤙
Omg it is an RC car, just put a giant antenna on top of it. Seriously brother, I don't know how u come up with these cars. Absolutely phenomenal!! Can't wait to see 100% done . Ty brother for all the sweeeeeet videos
When you discussed putting covers in the front corners of the engine bay, why not make a custom 1 piece radiator shrowd, that will help with radiator cooling and add aesthetic to cover radiator and the front corner covers. Just a suggestion. YOU DO YOU BRO!
@@CaseysCustomsluvin' the wheels too but idk if you or anyone else noticed but the turbine cuts are pointing different directions. Nonsymmetry stuff like that kinda bugs me. Great car though.
OTOH have you seen how often oil is spilled, fires are set etc.... lol A nice epoxy coating on the floor, maybe take care of the trip hazard / kids sidewalk crack bike jump lol Oh and blue or grey paint on the walls hides transmission fluid stains well lol
That little crx is looking so wicked can’t wait to see the finished product and also the wide body AE86 is looking wicked too can’t wait to see that all finished as well Love watching these videos ✌🏻👍🏻
I’m in the process of piecing an air bag system for my car on the cheap, and I got that same loud-ass pressure gauge. Kinda neat. Love that you’re putting so much into this and making it so clean.
One of my favorite TH-cam builds. I’ve kept up with some of your other projects but this one tops the list. Please just please do the exterior justice. Either wrap or paint done right. Interior can stay basic. Racing seat steering wheel and gauges. Then show it off everywhere. Keep at it. 🎉
Wow man those rims are awesome, I could not have imagined this car getting any cooler but it has surpassed my wildest imagination. Great work, I'm deeply impressed by your craftsmanship. 👌🏻💪🏻
Those wheels are a Tribute man! Love the fact you put in the center vents. Real homage to the Si wheels. 100. I had an '88 in '95, wings west kit with that same wing. NOS turbo all that fun stuff. Fell asleep coming from the casino. Sad day. Your CRX is Awesome bro!.
OMG that looks badass with those wheels, and you 1000% have to get Robbie to paint that car, he does amazing work, you need to reach out to him ASAP!!!
Look at lionheart tires! They had the perfect tire for my bagged Silverado cause I’m running a 24 inch rim. Had a tire stretch previously but I didn’t like the edge of the rim sticking out! It can be done just gotta find the right shop that will and know how to put the tire on
Best builds I have ever seen hands down. Reminds me of when I used to watch Gas Monkey Garage but instead you do it all yourself and have more creativity. Keep doing your thing brotha 🙌🏽
if you stick a piece of cloudy acrylic in your custon caseys custom logo and have your LED's lined along the edge of the acrylic inside the cover plate, it should light the acrylic up solid red so that the lighting in your logo is uniform. Just a thought, if that isn't what you are already planning roughly.
On the rear left and right inner bulbmis are the night lights and the brakes lights and the left and right outer are your left and right turn signals and on the middle there's two red reflectors and the two white ones are your reverse 👍👍😎😎love the wheel design and specs cassey customz😎😎😎
I stay over 45 on stretched tires, and I have dailied on stretched tires for over a decade. i ran 17x9 with 215-45 tires on a few cars, but all bigger than a crx. Still, the stretch helps clearance. currently I have 215/45-18 on 18x9 on my BB6 daily, except winter. It gets lifted & snow tires 😂
*WOW!!!* The sheer amount of time, money, blood, sweat and dedication you put into this entire project is amazing. You reached deep into your 6 demon bag to pull this one off, you are an absolute rock star!
Makes me sad to see such an awesome build come to an end. My late uncle who I was close with loved CRXs. Watching this always makes me think of him. Thanks for the awesome build! Can’t wait to see it painted it’ll be bitter sweet!
I love the build man, always wanted a CRX back in high school. I build wiring harnesses for a living, would love to see one of mine on a build like this instead of farm equipment. If you want, I would do it for the cost of materials for something like this.
I just subscribe to your channel a couple months ago after seeing you on Daltons channel. I've been loving the build! I have a 69 Chrysler Newport custom and an 02 Buick with a wild interior lol, you do great work, my dream custom build someday is a 62 ford f100 long bed, ditch the twin I beam, make it a straight axle gasser with a 440 big block Chrysler and paint it to look like the bi plane the red baron flew. Keep the vids coming people think you need a super fancy garage to do good work but the motivation you have it was matters most!
@CaseysCustoms np man! You'd get a kick out of the Buick it looks like a custom from the 50's, I'm the same way with cars I'm always thinking of what to do to make my shit unique lol
Nice build! the wheels look really good on it! for your interrogations around 18min mark: A windshield guy will easily remove the quarter glass for you for like 50$ . Your primer isn't sticking well in that area because the quarter glass being still there, you couldnt sand the edges properly. Primer/paint has to ''wrap around'' a panel as much as possible and has to be sprayed on a properly scuffed surface. If you really dont want to remove that quarter glass, to prep the edges properly, look up ''3M Perforated Trim Masking Tape'' the blue one. it allows you to tape the window and lifts the rubber molding. But its best to remove it really... coatings are always thinner on edges, and with a molding that rests/rubs against it permanently, or simply wind, water, dust, elements, ect, over time its always at the edges paint will start peeling if prep isnt good!!
Casey, You have hit another home run with this CRX XP for Extra Power (XP sounds better than EP) Anything starting with an "E" sound like electric. She is a beauty!
Run a 255/45 tire a small stretch will narrow the sidewall and you’ll have the same look and. Size as a 265/35. Also look into the @vevor diesel heaters you can run used filtered engine oil in them.
Was nice to see Mustang again. Was wondering how he was doing. Definitely a big boy like our Nibbler. We call him a micro cougar lol His brother is a lot smaller, likely related to his crooked tail. We think the injury occurred pretty early (6 weeks when we got them) and he missed out a bit on feeding. The little one is the one ya gotta watch out for lol
The inner Red Lights are for the European market as they are Rear Fog Lights. They only are to be used in thick fog in conjunction with the normal rear lights.
I'm just guessing that the front tires are going to do some major rubbing on the outer lips as well as the inner down-pipes, unless you don't plan on doing any turning. Looks great though.
Casey, love the wheels man. Love what you did with all this build and I really don't want to be a party pooper but it could use some smaller profile tires. Cheers man!🎉
That damn car is incredible. This is something I have been wanting to see done for so long. To see it slowly taking form is a thing of beauty. Freaking incredible dude 🫡
I’ve definitely run lower profile than that without issues. As long as you’re not stretching the sidewalls, the tire shop is just being lazy. It’s looking good though. With the wheels being polished, I’d go with a darker color, like a graphite grey or dark purple.
I ran 255/35-17 in a track based semi slick with really stiff side walls for years, went through 8 to 10 sets of them, never an issue getting them fitted, even the mobile fitter from online tyre sale company did it. Definitely need to use a tyre fitter that ain't so lazy or knows what they are doing. There's loads of cars that use wider 35 profile that can be fitted at any tyre fitter.
@@CaseysCustoms sorry 265/35-17. A quick check on Michelin site they do all the way to 335/35-17. Don't know if some of these sizes are less common in the US maybe ? My point remains the same, the tyre fitter that can't fir tyres that clearly are fitted to plenty of cars or they would not be made. Sounds a lot like the alignment centre I used to get some fitted once that said my car was too low and the couldn't get Jack's under it.
Been watching you for a couple months now man love your builds love the way you do your videos. You’re funny intelligent and you’re open to options. I don’t know if you’ll see this, but would you ever consider doing a Cobalt Ss ? I’ve owned a couple now the supercharged ones and they’re super fun lots of mods and cheap parts.
That’s a sick CRX❤💪Can’t wait to see that thing rip around👀BTW just a quick calculation and power to weight is close to some of the 8s electric RC😂Gonna be a beast!
HOW YOU LIKING IT?!? ALSO FORD ROADSTER GIVEAWAY IS LIVE NOW! ⬇️
caseyscustoms.com/products/1951-chevy-giveaway-decal
She bangs! I think you should hit up Adam (BodeVision) for paint. He did BoostedBois Civic and he's just a cool dude.
I wired my halos to the running lights so they could be on by themselves Looks sick at night
@Casey interested in a T bucket kit car with a small block 283 that’s punched to a 301 with dual carb victor intake?
@@christopheraustin918i kinda hate t buckets honestly, i don’t fit in them very well lol
Bode vision on TH-cam collabs on paint jobs as well. He is closer to you than us here in Utah.
Those are the wheels right there. They are so badass!!! I am in love with them!! I would put those on my Porsche!!! This car is so awesome and brings back so many memories from high school and the start of college!!! One of my favorites of your builds!!!
No!!! I want the old set back
You can find "the likes" in a c4 Corvette... They ain't the same but you can get the "likes of them"
Right?
The Foryota
Well done brother. Love the wheel choice and the way it came together.
Can’t wait to see it painted.🔥
I know you don't want make a 10 videos series about the paint job, but I going to give you two reason: You are a great entertainer😅... and second we want to see all the process. May be a fast foward video with a background explanation.... Great job! I really enjoy this build from the beginning. F100 1953 and this one are my top 🔥
Thank you very much! I’ll definitely show some, but no way we can film all 300 hours of body work lol
75 full SD cards later lmao
As a Scottish native, we appreciate hondas big time. Big 'murican v8s aren't quite accepted as much, but damn Casey, you made by far the Daddy of all custom crx'S . Hands down. The full journey has been awesome and gained another subscriber. You set the standard high man. Big appreciation and respect for you and your old mans love n dedication. Keep inspiring. Kudo's for adopting the cat. It pays off man
That Casey's Customs light could be your high third break light. That way it would light up every time you hit the brakes.
Hey man was watching your video here in Canada noticed your diesel heater smoking If you use a gallon of gas and four gallons of diesel mixed you won’t get smoke Burns like kerosene. Nice work Take it easy
Canadian here as well, been on winter construction sites for years and we always mix gas into them to reduce smell and smoke. You can run 50/50 with no problems
With a crack in fiberglass drill a hole where the crack stops then fix it so the crack doesn't spread
Yep, on this one I’m prolly gonna put a piece of sheet metal behind it too. Give it a little extra strength
That's right. Releases the tension that is causing the crack 👍 good advice here
@@CaseysCustoms use some wind screen sealant to affix it at the back, conter sink some holes in the fibreglass and drill holes and pop rivet from the outside then just skim it with some fibre bog over the pop rivet/holes 😎
God almighty!! Casey, even without paint, that car is so sick!!🔥🔥🔥🔥🔥🔥 The wheels looks so ridiculously big, that at the same time, it brings the whole build to perfection! You need to keep this car forever! I hope you build the AE86 as great as this one. Love it!!!!
This is coming together so well and the wheels look insane. Excited to see some of the paint progress but really hoping to see some interior work. This thing deserves a sorted interior.
I would love to see that
Hey Casey those rear side windows are held in by clips easy to take out just need to reseal with a good adhesive
Ooh thank you! That’s good to know!
Casey, this car is my favourite car now. The wheels really set it off, can’t wait to see how it looks all painted up. So excited
Okay those wheels are BALLER. I can't wait to see it painted!
Those wheels look so damn beautiful 🤌🏻
Those are the wheels right there. They are so badass!!! I am in love with them!! I would put those on my Porsche!!! This car is so awesome and brings back so many memories from high school and the start of college!!! One of my favorites of your builds!!! I just looked. My car has 20" wheels that are 10.5" wide. I'm running a 275x30 on it and there is no way it's 25" tall!! I don't understand your tire guy!!
The wheels look sick!!! Are they directional? Looks like the rear one belongs on the other side. Keep up the good work can’t wait to see the finished product. 🤙
Has to be! I love my directional wheels!
I absolutely love that car !!!!! …….. please keep that one for yourself Casey , it’s so badass .
Omg it is an RC car, just put a giant antenna on top of it. Seriously brother, I don't know how u come up with these cars. Absolutely phenomenal!! Can't wait to see 100% done . Ty brother for all the sweeeeeet videos
When you discussed putting covers in the front corners of the engine bay, why not make a custom 1 piece radiator shrowd, that will help with radiator cooling and add aesthetic to cover radiator and the front corner covers. Just a suggestion. YOU DO YOU BRO!
I like that idea, it would clean up the front of the engine bay even more. Good idea !
Everybody hates on body work...but i would not mind seeing a time lapse along with showing the products you use and the process you follow.
Like the people said...wheels are sick AF!!
For some reason these Rims reminded me of the CRX SI original stock Rims...
The ride is looking awesome...!! 😊
That’s cus We modeled the center of these off of a 89-91 crx si wheel, had to add some extra flare to the outside of the wheel though lol
@CaseysCustoms ..OIC I knew something looks familiar 🤔....loving the ride keep doing your thing..
@@CaseysCustomsluvin' the wheels too but idk if you or anyone else noticed but the turbine cuts are pointing different directions. Nonsymmetry stuff like that kinda bugs me. Great car though.
I remember back when you used to steal wheels from your dad. Look at you now, custom one-off hoops!
Oh don’t get it wrong, I’m still gonna steal his wheels 🤣
Can we get some shop mods this spring? Think some paint, reorganizing, and some new work benches would go a loooong way in this shop.
OTOH have you seen how often oil is spilled, fires are set etc.... lol A nice epoxy coating on the floor, maybe take care of the trip hazard / kids sidewalk crack bike jump lol Oh and blue or grey paint on the walls hides transmission fluid stains well lol
That little crx is looking so wicked can’t wait to see the finished product and also the wide body AE86 is looking wicked too can’t wait to see that all finished as well
Love watching these videos
✌🏻👍🏻
Once it's finished, take it down to Tulsa, Oklahoma for the Starbird Custom Car show!
I’m in the process of piecing an air bag system for my car on the cheap, and I got that same loud-ass pressure gauge. Kinda neat.
Love that you’re putting so much into this and making it so clean.
Dude I couldn't go to the comments fast enough when I seen them Wheels 🤯🤯 much love from Detroit 👅
"The right way to do it, is to pull this rubber off" -Casey
Shit, i say sus stuff even when im not doing it on purpose 🤣
GIGGITY GIGGITY GOO😂
One of my favorite TH-cam builds. I’ve kept up with some of your other projects but this one tops the list. Please just please do the exterior justice. Either wrap or paint done right. Interior can stay basic. Racing seat steering wheel and gauges. Then show it off everywhere. Keep at it. 🎉
Wow man those rims are awesome, I could not have imagined this car getting any cooler but it has surpassed my wildest imagination. Great work, I'm deeply impressed by your craftsmanship. 👌🏻💪🏻
Looking great. I can’t wait for the video of it complete and ripping the streets!
Those wheels are a Tribute man! Love the fact you put in the center vents. Real homage to the Si wheels. 100. I had an '88 in '95, wings west kit with that same wing. NOS turbo all that fun stuff. Fell asleep coming from the casino. Sad day. Your CRX is Awesome bro!.
This build is coming out sick! Ba da da da da. I'm lovin' it 😂
OMG that looks badass with those wheels, and you 1000% have to get Robbie to paint that car, he does amazing work, you need to reach out to him ASAP!!!
Look at lionheart tires! They had the perfect tire for my bagged Silverado cause I’m running a 24 inch rim. Had a tire stretch previously but I didn’t like the edge of the rim sticking out! It can be done just gotta find the right shop that will and know how to put the tire on
Best builds I have ever seen hands down. Reminds me of when I used to watch Gas Monkey Garage but instead you do it all yourself and have more creativity. Keep doing your thing brotha 🙌🏽
if you stick a piece of cloudy acrylic in your custon caseys custom logo and have your LED's lined along the edge of the acrylic inside the cover plate, it should light the acrylic up solid red so that the lighting in your logo is uniform. Just a thought, if that isn't what you are already planning roughly.
The new wheels for the Honda are freaking sick……. The Honda is one of your best builds yet
On the rear left and right inner bulbmis are the night lights and the brakes lights and the left and right outer are your left and right turn signals and on the middle there's two red reflectors and the two white ones are your reverse 👍👍😎😎love the wheel design and specs cassey customz😎😎😎
Never liked hatchbacks but this one I can get on board with. Good lines, stance, looks good.
this car would be on the cover of every magazine back in 2004. can’t wait to see it painted man🔥
I stay over 45 on stretched tires, and I have dailied on stretched tires for over a decade.
i ran 17x9 with 215-45 tires on a few cars, but all bigger than a crx. Still, the stretch helps clearance.
currently I have 215/45-18 on 18x9 on my BB6 daily, except winter. It gets lifted & snow tires 😂
*WOW!!!* The sheer amount of time, money, blood, sweat and dedication you put into this entire project is amazing. You reached deep into your 6 demon bag to pull this one off, you are an absolute rock star!
Makes me sad to see such an awesome build come to an end. My late uncle who I was close with loved CRXs. Watching this always makes me think of him. Thanks for the awesome build! Can’t wait to see it painted it’ll be bitter sweet!
Please put the old wheels on the vette. Think it will look sick
Uaau that's must crazy looking good CRX I ever seen ..crazy well done
LOVE those wheels!
This is my favorite car you've built, my top 3 would be 1) the CRX 2) Baby & 3) the Porsche.
I love the build man, always wanted a CRX back in high school.
I build wiring harnesses for a living, would love to see one of mine on a build like this instead of farm equipment. If you want, I would do it for the cost of materials for something like this.
Crx are gems even stock ones if you ever drove one you know
I just subscribe to your channel a couple months ago after seeing you on Daltons channel. I've been loving the build! I have a 69 Chrysler Newport custom and an 02 Buick with a wild interior lol, you do great work, my dream custom build someday is a 62 ford f100 long bed, ditch the twin I beam, make it a straight axle gasser with a 440 big block Chrysler and paint it to look like the bi plane the red baron flew. Keep the vids coming people think you need a super fancy garage to do good work but the motivation you have it was matters most!
Thank you, you got some cool shit too!
@CaseysCustoms np man! You'd get a kick out of the Buick it looks like a custom from the 50's, I'm the same way with cars I'm always thinking of what to do to make my shit unique lol
Nice build! the wheels look really good on it!
for your interrogations around 18min mark:
A windshield guy will easily remove the quarter glass for you for like 50$ .
Your primer isn't sticking well in that area because the quarter glass being still there, you couldnt sand the edges properly. Primer/paint has to ''wrap around'' a panel as much as possible and has to be sprayed on a properly scuffed surface.
If you really dont want to remove that quarter glass, to prep the edges properly, look up ''3M Perforated Trim Masking Tape'' the blue one. it allows you to tape the window and lifts the rubber molding. But its best to remove it really...
coatings are always thinner on edges, and with a molding that rests/rubs against it permanently, or simply wind, water, dust, elements, ect, over time its always at the edges paint will start peeling if prep isnt good!!
Casey, You have hit another home run with this CRX XP for Extra Power (XP sounds better than EP) Anything starting with an "E" sound like electric.
She is a beauty!
yes the little rear window has to come out..the new seals are available and not to expensive...call your local glass installer..
Casey the wheels look killer, awesome design. The wheels and seat look good together. I would stand around and stare at the crx in the garage too.
You’re in my Rushmore of Car builders!!!!!!!!! description
this is rad man, you're making me want to finish the hemi conversion on my scion really badly lol.
yeahhhhhhhhhhhh Cant wait to see it after paint!!!!
the wheels look amassing.
Run a 255/45 tire a small stretch will narrow the sidewall and you’ll have the same look and. Size as a 265/35. Also look into the @vevor diesel heaters you can run used filtered engine oil in them.
I wasn't sure about the wheels, but now that they are on the car..... 🔥🔥🔥
Good God I'm such a sucker for animals here I was as a grown man all excited about the kittens 😆
Beautiful 🥹 can’t wait till she is painted dawg, props keep doing what you doing big dawg.
Nice wheels bro! And every good workshop needs a shop cat !
It blows trying to find 17inch tires. Especially if you like a 35 series. Love the wheels and can't wait for paint.
Was nice to see Mustang again. Was wondering how he was doing. Definitely a big boy like our Nibbler. We call him a micro cougar lol His brother is a lot smaller, likely related to his crooked tail. We think the injury occurred pretty early (6 weeks when we got them) and he missed out a bit on feeding. The little one is the one ya gotta watch out for lol
Love the crx looks awesome. Was also wondering where you found the light sockets from. I need some replacements. Thanks in advance.
I know you want to do red for the paint but honestly a patina paint job would be beautiful especially if it was more like a greenish teal color
@CaseysCustoms i wired my halos to the running lights so i could have just them on alone
Casey, The CRX Looks Great! Love that car!
Installing stretched tires may helpful overall fitment.
For the algorithm and also my love of a crx and your channel. Ty kind sir!
Is there a right pair and left pair for the wheels? If not the spokes are going to be swooping different directions.
Put a clear plexi glass below your logo that would look cool with light spreading even
might have to chop the fenders and put flares on. looks killer brother.
REALLY hoping you go blue, not red. Love your builds, look forward to seeing this one in paint!
You can mix used motor oil with Diesel and a little gasoline in those torpedo heaters.
Love the kit. Sits beautifully on sides but rear isn't sitting even with the sides and front its a few inches off
Lookin Killa!!!
You can put a Spacer between air suspension and the body to fix the The problem
Seen a vid of a sedan ek with a turbo 1jz super sick cant wait to see this crx done
The inner Red Lights are for the European market as they are Rear Fog Lights. They only are to be used in thick fog in conjunction with the normal rear lights.
I'm just guessing that the front tires are going to do some major rubbing on the outer lips as well as the inner down-pipes, unless you don't plan on doing any turning. Looks great though.
Loving the way this thing is turning out dude
Casey, love the wheels man. Love what you did with all this build and I really don't want to be a party pooper but it could use some smaller profile tires.
Cheers man!🎉
A CRX I would drive, for sure! Looking good so far
That damn car is incredible. This is something I have been wanting to see done for so long. To see it slowly taking form is a thing of beauty. Freaking incredible dude 🫡
I’ve definitely run lower profile than that without issues. As long as you’re not stretching the sidewalls, the tire shop is just being lazy.
It’s looking good though. With the wheels being polished, I’d go with a darker color, like a graphite grey or dark purple.
Looks pretty sick now 😎 can’t wait to see it painted
Love those new rims mate! Cars gunna be killer
Totally different look with those wheels 👍🏾👏🏾
I ran 255/35-17 in a track based semi slick with really stiff side walls for years, went through 8 to 10 sets of them, never an issue getting them fitted, even the mobile fitter from online tyre sale company did it. Definitely need to use a tyre fitter that ain't so lazy or knows what they are doing. There's loads of cars that use wider 35 profile that can be fitted at any tyre fitter.
@@Crabash you probably had 18’s and not 17’s because if you google 255/35/17 you can’t even find them online….
@@CaseysCustoms sorry 265/35-17. A quick check on Michelin site they do all the way to 335/35-17. Don't know if some of these sizes are less common in the US maybe ? My point remains the same, the tyre fitter that can't fir tyres that clearly are fitted to plenty of cars or they would not be made.
Sounds a lot like the alignment centre I used to get some fitted once that said my car was too low and the couldn't get Jack's under it.
The CRX looks awesome, Casey!!!
Looking Great man. Love the Rex
Man this is badass. You outdid yourself!
Those wheels are so sick ! But the gap above the headlights look derpy AF and this seat is just horrible. Very cool project monsieur :)
That car is SLICK my good man. PHUCK YEA..... That is right up my street bruv, right up...love the vibe. Subbed.
Been watching you for a couple months now man love your builds love the way you do your videos. You’re funny intelligent and you’re open to options. I don’t know if you’ll see this, but would you ever consider doing a Cobalt Ss ? I’ve owned a couple now the supercharged ones and they’re super fun lots of mods and cheap parts.
This would be a SICK DRIFT CAR🤯👏🏽🍻
That’s a sick CRX❤💪Can’t wait to see that thing rip around👀BTW just a quick calculation and power to weight is close to some of the 8s electric RC😂Gonna be a beast!