Very nice video. I have one question. The CU320-2 PN can only be used with S7-1500 CPU if i want commission in stardrive (i'm using stardrive v17)? If i want connect to a s7-400 i need to commission the sinamics in starter?
how to prevent when we stop and start the cpu or cut off the power of control panel to loss home position ? I want that when I set home position once, then I wanna keep it always. it doesn't matter then whether I cut off the power or cpu stop. Can you please help ?
hello thank you for useful video! i have a sinamic cu320 version 2.6.2 with CBE profinet card and i want to have it in TIA portal but there is not such model in TIA hardware catalogue!! is it possible to add this model in tia portal ? if yes how?
Hello I am Using 1 CU with 2 Drive of Servo. I am using telegram 1 for Both Drive & Telegram 390 for CU. I am using profibus connection with s7300. With Programming Blocks sfc14 & sfc15. With DB. I have a Problem that only One Drive is Sending & receiving Data. Both CU & Drive 2 Show No Telegram in Interconnection setting. Could you please help me
Have you set the telegram 1 at the drive side? Why you are using the telegram 1 (the speed control) for S120(a high end servo drive). Aslo your question is far away from this video topic, I would recommend contact Siemens support for your application, my feeling is that you are directing not quite direction for using your control devices.
@@electricalautomationYes I am using Telegram 1 for both 2 Drive. But in My Program I call sfc14 & sfc15 3 Times. 1 for CU, 2 for 2nd Drive, 3 for 3rd Drive but it only read Sfc of Drive One CU & Drive 2 Register not Sending & receiving. is there any Method to Increase Profibus Cycle. I think it is Profibus Cycle Issue.
@@shahzaib1994 This link should be helpful support.industry.siemens.com/cs/document/8894584/micromaster-4-(mm4)-sinamics-g120-(cu240s-d-dp-dp-f-pn-pn-f)-essentials-for-profibus-and-pkw-mechanism-?dti=0&lc=en-CA
![MS05d. [Siemens S120 #3] One Button Tuning S120 via STARTER and TIA Portal Startdrive](http://i.ytimg.com/vi/yZ0XspJozkQ/mqdefault.jpg)
![MS05d. [Siemens S120 #3] One Button Tuning S120 via STARTER and TIA Portal Startdrive](/img/tr.png)
![MS05b. [Siemens S120 #1] SINAMICS S120 Configuration and Commissioning via STARTER](http://i.ytimg.com/vi/9odur-A1_lI/mqdefault.jpg)
Thank you very much for the lesson
Welcome!
Very nice video. I have one question. The CU320-2 PN can only be used with S7-1500 CPU if i want commission in stardrive (i'm using stardrive v17)?
If i want connect to a s7-400 i need to commission the sinamics in starter?
How can do it in TIA ?
If you are using S7-400, you can not use the 'TO'. You can use the position loop in the CU320, then the S7-400 just send position command.
Is the CU320 can use in startdrive with S7-400 ?
It can works with the S7 1200 PLC too@@electricalautomation
So good your tutorial series, i have a question, how i know what kind of memory cp works with the CU 320-2 PN, please help me :)
'memory cp'? not sure what do you mean. Thanks watching!
how to prevent when we stop and start the cpu or cut off the power of control panel to loss home position ? I want that when I set home position once, then I wanna keep it always. it doesn't matter then whether I cut off the power or cpu stop. Can you please help ?
Using multiple revolutions absolute encoder for your servo drive.
@@electricalautomationBut I'm already using absolute encoder ? can't I do it with Control unit?. I mean CU320 in startdrive side ?
I am not able to connect the plc S7-1212C with the drive S120 CU310-2 Pn
S7-1200 (v4.x) can not use 'TO' to control S120. You can use 'GSD' method and EPOS telegram 111 to control S120.
hello
thank you for useful video!
i have a sinamic cu320 version 2.6.2 with CBE profinet card and i want to have it in TIA portal but there is not such model in TIA hardware catalogue!!
is it possible to add this model in tia portal ? if yes how?
I would recommend using Starter software and ' auto config' function, you can view from th-cam.com/video/9odur-A1_lI/w-d-xo.html
Hello I am Using 1 CU with 2 Drive of Servo. I am using telegram 1 for Both Drive & Telegram 390 for CU. I am using profibus connection with s7300. With Programming Blocks sfc14 & sfc15. With DB. I have a Problem that only One Drive is Sending & receiving Data. Both CU & Drive 2 Show No Telegram in Interconnection setting. Could you please help me
Have you set the telegram 1 at the drive side? Why you are using the telegram 1 (the speed control) for S120(a high end servo drive). Aslo your question is far away from this video topic, I would recommend contact Siemens support for your application, my feeling is that you are directing not quite direction for using your control devices.
@@electricalautomationYes I am using Telegram 1 for both 2 Drive. But in My Program I call sfc14 & sfc15 3 Times. 1 for CU, 2 for 2nd Drive, 3 for 3rd Drive but it only read Sfc of Drive One CU & Drive 2 Register not Sending & receiving. is there any Method to Increase Profibus Cycle. I think it is Profibus Cycle Issue.
@@shahzaib1994 This link should be helpful support.industry.siemens.com/cs/document/8894584/micromaster-4-(mm4)-sinamics-g120-(cu240s-d-dp-dp-f-pn-pn-f)-essentials-for-profibus-and-pkw-mechanism-?dti=0&lc=en-CA
Very good Sir
Thanks and welcome
goooood
Thanks! Enjoy
very, very helpful:) thx
Glad it helped! Welcome!
You nailed it
Thanks! My friend!
Hello sir... please resume the series....
Thanks watching, yes, the Step3 will be launched tomorrow. I am very busy these days, sorry for releasing delay.
Very good...
Thank you! Cheers!
Good Thank you
Welcome 😊
Thank you good one 👍.....>3
Thanks! I am very busy these days, the next video will be launched slightly delay, but will be.
Good afternoon. Does anyone have a SINAMICS Startdrive V14 SP1 S120 under TiaPortal V14 SP1?
support.industry.siemens.com/cs/document/109746466/sinamics-startdrive-v14?dti=0&lc=en-WW
support.industry.siemens.com/cs/document/68034568/sinamics-startdrive-v14-sp1?dti=0&lc=en-DE