thanks a lot for these tutorials, im getting comfortable with TIA portal thanks to you. These 2 videos on Sinamics G120 were a bit random in the TIA Full Playlist, just going through that playlist now.
Its great video for those who start as beginner like me with TIA portal. Thank you so much bro for detailed explanation for free down load from siemens site. Now I am being confortable with it.🥰👌
These videos are lifesavers for automationstudents, thank you for making them ;D Can you please make a video about trends and logging data from drives?
Thank you for your fine videos :) I have not been in the game for long, but you most certainly have helped me on the way - and now with startdrive video 1&2. Niiiiiiccccee :)
hello sir, i need one clarification difference between ramp on & off and acceleration & deceleration time also kindly share details about holding brake and dynamic braking resistor
Unfortunately have not worked with the Servo Functions enough to really make a video about it... maybe I'll get a servo drive in the future, as I am personally also interested in those
Hey! Love your videos! I got a question regarding a G120C frequency converter. I set up multiple without any problems, when i suddenly had trouble connecting to a few. Would you say Isochronous mode is a must for all frequency converts?
Hello, I have a problem I hope you would help me with it, I have TIA Portal v13, when I installed Startdrive optional, the commissioning wizard is not available, it says (no communication), what is the problem? Thank you in advance.
@@ramzi92100 I haven't found a solution yet, if you find one please share it hhhh (I think that with tia portal v13 the drive must be connected and the commissioning is done online "just an idea") but offline without a drive being present I still have the same problem.
thanks soo much ! i have a G120 CU240 e-2 PN I want control with profibus and terminal . i set parameter p1000[0] = profibus p1000[1] = fixed speed command data p0810 =r722.0 (DI0) but profibus only run . please help me .
hey bud, you are so helpful and full of information in your brain =) i have g120x but that packages dont include X. do you have an idea about it. i searched in siemens but i couldnt find.. hope you help me. because that basic panels make me sick =)
hi plz can u make 2 sycronize servo motor master and slave with gearing comment. your video very useful and u explain evey point because ı want that plz continue siemens videos .plz make gearing or sent me a video or documantation but ı prefer from u a video series about some servo videos esspecially sycronize programs .plzzz
![MS05c. [Siemens S120 #2] SINAMICS S120 Configuration and Commissioning via Startdrive TIA Portal](http://i.ytimg.com/vi/wzdZdnwpkuo/mqdefault.jpg)
Cheers from Sweden! I and my classmates are very thankful that you're making industrial automation studies both easier and way more fun.
You are , you are, you are ... incredible man. Thank you sooo much.
You are very welcome!
Thank you from Belgium! Good job, keep going man!
thanks a lot for these tutorials, im getting comfortable with TIA portal thanks to you. These 2 videos on Sinamics G120 were a bit random in the TIA Full Playlist, just going through that playlist now.
Best Regards from Sweden I find your videos very useful and you are very humble man with a lot of competence, many thanks again and again.
Its great video for those who start as beginner like me with TIA portal. Thank you so much bro for detailed explanation for free down load from siemens site. Now I am being confortable with it.🥰👌
Thank you Hegamurl, so nice to see a Siemens video that we can hear you and understand what your saying, Good Work!!!!
8:50 I never click on the help button. I just go to this channel. Problem solved :)
clear, simple,Interesting & Awesome explanation ...... Thank you very much
These videos are lifesavers for automationstudents, thank you for making them ;D
Can you please make a video about trends and logging data from drives?
Thank you for your fine videos :) I have not been in the game for long, but you most certainly have helped me on the way - and now with startdrive video 1&2. Niiiiiiccccee :)
Happy I can help! You'll be back in the game in no time!
great videos, im actually learning a lot as a plc beginner.
Great Informative and clear, Many thanks from UK
Please continue making tutorials 🙏
Thank you very much ✌🏻 learned a lot more than in university!
Really appreciate what your doing!
Hi Hegamurl, is there somewhere to download an fb to control the drive?
hello sir, i need one clarification difference between ramp on & off and acceleration & deceleration time also kindly share details about holding brake and dynamic braking resistor
For me the ramp on and the acceleration is the same things...
The ramp on is the term designating the acceleration curve of the motor
Can you teach configuration and programming SIEMENS Servo drive system and synchronization ?
Unfortunately have not worked with the Servo Functions enough to really make a video about it... maybe I'll get a servo drive in the future, as I am personally also interested in those
I have an issue . The ready light is red and the motor will not run. Any idea?
Hi
Do you have an example of reading data via 3RW44 softstarter profinet?
Thank you
Is it possible to configure third-party VFDs using the TIA portal? For eg: Grundfos VFD pump to be configured using TIA.
Hey! Love your videos!
I got a question regarding a G120C frequency converter.
I set up multiple without any problems, when i suddenly had trouble connecting to a few.
Would you say Isochronous mode is a must for all frequency converts?
Thank you for the video. What if we had multiple drives and one failed, how would we down parameter file on the computer to the drive ?
Hello, I have a problem I hope you would help me with it, I have TIA Portal v13, when I installed Startdrive optional, the commissioning wizard is not available, it says (no communication), what is the problem? Thank you in advance.
Me too i have the same problem, so if you have find the solution please share it with me
@@ramzi92100 I haven't found a solution yet, if you find one please share it hhhh (I think that with tia portal v13 the drive must be connected and the commissioning is done online "just an idea") but offline without a drive being present I still have the same problem.
The problem is , if I choose PZD2/2, I cant get current and Torque feedback from the VFD, so can I choose PZD 6/6?
Is it possible to configurate the DI 0, DI 1, DI 2 and DI3 as F-DIs or can you only use DI 4 DI 5?
Brilliant as always! Thank you
Can someone provide guidance on how to establish communication between a Siemens G120 drive and C#
Thank you sir, it possible to teach us how to start VFD with PLC(G120 Sinamic)
Hello,
Is it possible to drive a third party servo with seimens servo drive like sinamics V90.
Thank you very much ...i am really thankful to you for this video .
Thank you very much for this video.
Thank you! Educational!
Any idea how to be use pzd in different different applications
Can you make a tutorial about S120
More of that stuff :D
Doing daily uploads of TIA these days, more and more coming up!
thanks man, explained perfectly!
Sir thank you for this video..... please make a video on servo drives
Please do with the s120
thanks soo much ! i have a G120 CU240 e-2 PN
I want control with profibus and terminal .
i set parameter p1000[0] = profibus
p1000[1] = fixed speed
command data p0810 =r722.0 (DI0)
but profibus only run .
please help me .
hi, how to communicate hmi to drive without plc
Thank you for this!
could please make video how to add ABB and Fanuc robot to Profisafe? :))
a valuable channel
Really nice explanation.
Thank you for your works
hey bud, you are so helpful and full of information in your brain =) i have g120x but that packages dont include X. do you have an idea about it. i searched in siemens but i couldnt find.. hope you help me. because that basic panels make me sick =)
merci pour la vidéo. très bien faite
U r the best dude.
Well explained, thanks
Plzz make video how to use pzd in g120
excellent tutorial
can i get your mail i d for small doubt regarding g 120x drive
🙏🙏🙏🙏
Спасибо большое!
thank you so much
cant register as uk not an option boooooo
thanks bro ! I
danke dir
THANK YOU
well explained
thanks
hi plz can u make 2 sycronize servo motor master and slave with gearing comment. your video very useful and u explain evey point because ı want that plz continue siemens videos .plz make gearing or sent me a video or documantation but ı prefer from u a video series about some servo videos esspecially sycronize programs .plzzz
Спасибо друг!!!
Nice
First
You win the internet... I guess^^