Siemens PLC to Drive Communication: Telegrams in TIA Portal
ฝัง
- เผยแพร่เมื่อ 27 มิ.ย. 2024
- Siemens PLC communication to Drives. A discussion on what telegrams are and how to set them up in TIA Portal for Siemens S120 Drives. Also, I go through some basic Portal Startdrive navigation.
Link to Previous Video:
• SINAMICS S120 Setup in...
Description for (most) telegrams: drive.google.com/file/d/1hZz0...
Overview of which telegrams are available across the SINAMICS line:
drive.google.com/file/d/1EQFK...
0:00 Introduction
1:51 Network Setup for S120
3:02 Setting Telegrams
9:56 Parameter Sets, Settings, Navigation
20:10 Outro - วิทยาศาสตร์และเทคโนโลยี
Great video once again, thanks.
Thank you for commenting! It is the best way to help these videos get out there. Everyone that takes the time to like and comment helps so much in the TH-cam algorithm. Y'all are what makes the community grow!
thank you for the good presentation
You are most welcome! I keep trying to fill the library of topics out, but if you have a specific question feel free to ask!
great, you know what my point of weakness is all about "Telegrams", would you please add some vids about this topic in some detailed manner, thanks again@@jasonwattsae
This would probably be a good topic for a livestream!
Hi Jason, Thank you for the very helpful vids. Im using a 6SL32440BB121FA0 CU240E-2 PN - Profinet with ST. The motor is running a loading screw and when the amps of the motor increases I need to program it to slow down and reverse it before then going forward again. What do you think the best telegram is to use for this?
I use 352 in all of my agricultural motors because it has the torque (current) data available in the base telegram. I set up torque limiting as an option and it might be useful for your project as well.
Check out the livestream on Load sharing and building a winder because I detail out how to set up torque limiting.
@@jasonwattsae Thank you, do you have a link for your load sharing video?
th-cam.com/users/live-3CXiDvMQuQ?feature=share
This one is the load sharing. If you have questions let me know! Thank you for being a part of this community!
Thankyou! I think u forgot to add the link to the dokument abt the telegrams types.
Thanks for catching this! I had to run out of my office as I was about to upload these, but I have updated the description with two links. One is the manual that was made by one of the best drive guys that works for Siemens here in the US that details out (most) of the telegrams. If you read that manual you will see it talks about other telegrams for specific applications. If those interest you shoot me a comment and I will try and get you on the right track. The second link is to a document that tells you which telegrams are compatible with what SINAMICS drives. I hope this help!
@@jasonwattsae Thankyou!
Hope they helped!
great..im beginner i want to know how to add new drive as s120 and set the parameters..thnks
This video is part of a series of videos that goes through the initial setup of an S120. Check out the first video below. Be sure to hit the like if it is helpful!
th-cam.com/video/LuAoVIfT4Cc/w-d-xo.htmlsi=LxWz3Y8YZdOImobq
Thnks u, next i want to know wht data can we get from the sinamics s120, can we get each data phase UVW from it to the PLC, cause i need the data to process it thnk u so much
@@B__AhmadNur_DMekatronika Sorry for taking so long to respond, but I wanted to go in and check to make sure that what you are asking is possible.
If you have a free word in your telegram, or use a free telegram, you can choose freely what to connect it to. Unfortunately, not all values are available for BICO connection. The value you are needing (r89) is not available to send to the PLC this way.
r72 is available, which is the output voltage being sent to the PWM controller. This will be the voltage that will be output on each phase
r69[0,1,2] is the Phase Current, which could be sent in the telegram
I will bring this up in my next livestream to show how I send this type of data.
i wait for ur videos about sends the parameter to plc. can i get ur email to next disuss about tht@@jasonwattsae
Yes, send it to jasonwattsae@gmail.com and we can chat from there.
How to configuration and programming 2 axis sync ?
Help for setting up S120 Hardware:
th-cam.com/video/LuAoVIfT4Cc/w-d-xo.html
Help for setting up Technology Objects:
th-cam.com/video/tINhCj2HfN4/w-d-xo.html
You can set up the leading axis as a positioning axis as shown in my videos
You will need to set up the following axis as a "Synchronous Axis" and under the "Leading Value Interconnections" make sure that your leading axis is added to the list.
At that point you can use blocks MC_GearIn, MC_GearInPos, or other synchronous blocks. I would suggest adding the blocks to a network and clicking the block and pressing F1 to pull up the detailed help file.
I have started recording videos for each individual MC block that I have experience with and the MC_GearIn and GearInPos will be featured in some of those videos.
I have a couple livestreams where I talk a lot about MC blocks if one of the videos above doesn't get you going. Here is the longest one:
th-cam.com/users/livedSGCjpwCKsc?feature=share
Good luck!