Hi great job. So as far as I understand, FCC should also work on Air Unit and Vista? I have a bit of a problem, although 7 channels are shown to me, but the Air Unit only runs at a maximum of 7 mbps. If I set the audience it increases to max 27 mbps. You can help me??? Or old Air Units with Vista are simply not supported. Thanks a lot.
@@dongyuanhao3855 Look at Bandwidth at 20MHz if you have 7 channels, if not then it is not in FCC mode. If you have 7 channels correctly, switch to 40MHz in the Bandwidth settings and it should work.
I'm not really sure. This hack was supposed to give you more power, but I personally didn't notice any major difference after multiple tests. It is nice to have the option of changing channels, and in some situations, different channels did greatly improve the connection
I don't have a power meter capable of measuring digital system power. I'm sure they do exist and expensive. This is the best method I could come up with. However, you need to look up Madtech channels. He has done more extensive testing, and he concluded this give you more power.
Hello, I have a Babyhawk 2 HD with Caddx Vista, and my goggles are DJI integra. I have unlocked FCC on the goggles, but how can I set or know the power level of the Caddx Vista? Nowhere in the goggle menu can I see or change the power. Can someone help me?
Hi and thank you for this video . I have a question about this hack. If I have not done so, do I also need to do the fcc hack on the vista? And if so how do I do that And do I have to do the hack on the avata to make this work all the way ? Or is the google have all I need to do the hack on ? Thank you 🙏🏽
Thanks for the Tutorial. Which channel do i have to select? So can I just select 40mhz and then channel 1 for the best range or what specific channel do you recommend. I would be really greatful for an answer thanks (:
Thank you. I have yet to try your tutorial, howewer my new googles v2 shuld arrive monday, can i update them to lates software and will the ham file still work? Or its only works on older firmware versions and possibly needs downgrading. PS i take it i dont need to do any hack on dji controller 2? Thank you.
Do you have a Gogglec 2 or Integra? BCs, .you only do the hack on the Goggle . I'm not sure if it will work on the Mini Pro 3 , but u can give it a try. I can't bcs I don't have one.
Ciao, bel tutorial complimenti, ..... Ho fatto tutto come hai spiegato, ho sbloccato i goggles, ma non riesco ad andare oltre i 400metri, dove posso sbagliare? Grazie.
Does this work for improving range in the U.K? I am flying a Bind N Fly Bob57 woth 03 unit & Crossfore. When I get about 360-400 meters away, I’m loosing the HD bars down to about 2 red bars and am scared to continue pushing it further. I still had video and control, it just showed 2 bars HD in goggles. I’m confused as I see footage of people doing long range with the Bon57, and I’ve bought a 4000mah LiLon iFlight fullsend battery for this reason. There were zero obstacles beteeen myself and the Bob, and I was still facing towards it so anyone know why I’m getting the red HD things loosing bars at such a short range? I’d Like to be able to get to around 700 meters at least ideally. If I do push it and loose connection then I hope my GPS Rescue will kick in, but I’m having to turn back much sooner that I want/need for some specific locations when I’m flying. I’m new to this stuff coming from normal drones and Avata so it’s all new to me. Again, it’s a Bob57 + 03 unit and Crossfore. I’m using Goggles 2 and TBS Tango 2. Any tips or info will be ideal. Cheers
In Europe/UK, DJI limits the VTX power output to 25mw due to EU/UK regulation. That is what is limiting the range on your O3 system. DJI is able to get your location when you activate/register the system on the app. This hack will definitely unlock your 03 power, but off course , I will never advise you to go against 🇬🇧 regulation.
Hey hey. Did you figure out how to fix it? I am having the same issue with bob57. I just did the FCC hack and yet to test it. Should the channels be set to Manual or any specific MHz and channel needs to be selected?
Do you now how to do the hack with the Caddx Vista vtx in combination with the goggles 2? Do we have to place a hack file also on the vista or only hack the goggles?
Thanks. So you say we need to stay in manual mode and not auto. Why is that and what do you base your decision to select a specific channel if on manual mode?!
When flying on auto, the system manages the power output. This is just my speculation based on my experience with the system. The 03 will be witching channel and managing the output power up and down based on the distance between the goggle 2 and the VTX. When running the system on manual mode, you lock the channel to a specific one, and you also lock the output power to the highest level. I have noticed a major improvement on reception quality when running on manual mode compared to auto.
@@GBoniFPV exactly I have the same feeling regarding the manual mode.Seems reception looks more stable. my question now goes what channel and frequency you would choose in order to get best reception.
@@GBoniFPVoh OK that makes sense. I did the hack but was still on auto. And was getting low mbps in places where I used to have 50mbps before I did the hack.
You probably didn't delete the suffix of ham_cfg_support. You need to delete the .txt .bin and other words during renaming and change it to ham_cfg_support.
@@nejc8a th-cam.com/video/KuKjWDJ6XeU/w-d-xo.html and th-cam.com/video/63Smmc0bNcg/w-d-xo.html. The second video will only be necessary if you need to roll back the firmware on your goggles.
Tried this and it didnt work, firmware 01.09.0000. Formatted sd in goggles n move ham file to root of sd card n reset goggles. Tried different ham files from 2 different source (rotor riot n mad tech). Driving me nuts. Any suggestions is appreciated
You probably didn't delete the suffix of ham_cfg_support. You need to delete the .txt .bin and other words during renaming and change it to ham_cfg_support.
You probably didn't delete the suffix of ham_cfg_support. You need to delete the .txt .bin and other words during renaming and change it to ham_cfg_support.
Hi GBoni FPV, that is the most practical tutorial i've seen. I would like to know your opinion, if I hack my google 2, could I increase the range with goggle 2 and mini 3 pro?
yes, works on latest software for Goggles 2 and the Integras I have. I tested range and distance went from 150m to 800m before it started to drop. Long range test, the LIPO6S got me 3.4km before i had to turn around (1600mah)@@ai_guitarist
You probably didn't delete the suffix of ham_cfg_support. You need to delete the .txt .bin and other words during renaming and change it to ham_cfg_support.
Nice He-man reference 👌 masters of the universe was aweosme
Hi great job. So as far as I understand, FCC should also work on Air Unit and Vista? I have a bit of a problem, although 7 channels are shown to me, but the Air Unit only runs at a maximum of 7 mbps. If I set the audience it increases to max 27 mbps. You can help me??? Or old Air Units with Vista are simply not supported. Thanks a lot.
They should be supported. Is this behavior started after you did the fcc hacked
@@GBoniFPV Everything is fine now, it was my fault, thank you😉👍
why after I opened fcc it become 7mbps in shorter distance,its just lose signal after 300m now. it worse
@@dongyuanhao3855 Look at Bandwidth at 20MHz if you have 7 channels, if not then it is not in FCC mode. If you have 7 channels correctly, switch to 40MHz in the Bandwidth settings and it should work.
@@alespacka what was the problem? i have the same issue. thanks
Good video thanks. What firmware is required for work with runcam wasp? I have assist 2 for drones
so when your on Auto fcc hack is not working ??
I'm not really sure. This hack was supposed to give you more power, but I personally didn't notice any major difference after multiple tests. It is nice to have the option of changing channels, and in some situations, different channels did greatly improve the connection
@@GBoniFPV What? so you are telling this whole hack is a hoax?
这个方法并不可靠，根据频道数量判断是否成功FCC是没用的，应该用功率计测量。
I don't have a power meter capable of measuring digital system power. I'm sure they do exist and expensive. This is the best method I could come up with. However, you need to look up Madtech channels. He has done more extensive testing, and he concluded this give you more power.
Hello, I have a Babyhawk 2 HD with Caddx Vista, and my goggles are DJI integra. I have unlocked FCC on the goggles, but how can I set or know the power level of the Caddx Vista? Nowhere in the goggle menu can I see or change the power. Can someone help me?
DJi took that power option with the O3. I missed that feature.
Bo I've seen so many videos all speaking the same but this was the only one that definitely worked. Thank you
Hi and thank you for this video . I have a question about this hack. If I have not done so, do I also need to do the fcc hack on the vista? And if so how do I do that And do I have to do the hack on the avata to make this work all the way ? Or is the google have all I need to do the hack on ? Thank you 🙏🏽
Just in the goggle, you don't have to do anything on the VTXs
Thank you so so much. You are the best
new update blocks this. :(
It didn't. U just have to redo the hacking process
Thanks for the Tutorial. Which channel do i have to select? So can I just select 40mhz and then channel 1 for the best range or what specific channel do you recommend.
I would be really greatful for an answer thanks (:
Thank you. I have yet to try your tutorial, howewer my new googles v2 shuld arrive monday, can i update them to lates software and will the ham file still work? Or its only works on older firmware versions and possibly needs downgrading.
PS i take it i dont need to do any hack on dji controller 2?
Thank you.
Just o be sure, this hack is for the Goggle 2, not the V2
My biggest question my guy is how come all youtubers have this “more” option and i dont ??
What do you mini by more options?
After your done do you have to leave the sd card in the goggles?
No you don't need to
Hey buddy, I urgently need to know how many milliwatts of power the Integra goggles use with the FCC hack, of course. Please respond, thanks a lot!
I can not give you an answer. Only DJI knows the answer . However, I have noticed in my testing.
@@GBoniFPV OK, thank you sir
Yeah but only works for Avata and Air Unit 🙄 I need FPV and Mini 3 Pro 😟
Do you have a Gogglec 2 or Integra? BCs, .you only do the hack on the Goggle . I'm not sure if it will work on the Mini Pro 3 , but u can give it a try. I can't bcs I don't have one.
@GBoniFPV I have goggles 2 - it's well known this hack works only for Avata and Air Unit
Thanks for the review
Ciao, bel tutorial complimenti, .....
Ho fatto tutto come hai spiegato, ho sbloccato i goggles, ma non riesco ad andare oltre i 400metri, dove posso sbagliare?
Grazie.
Are you able to change the channel on your goggle 2?
Nice tutorial. Well put!
Glad it was helpful!
Done ;) Do i have to leave the file on the card for future?
No, you don't need to
mec merci beaucoup
Does it also work with Googles 2 and DJI FPV?
I will give it a try and let you know
@@GBoniFPV OK thank you
Does this work for improving range in the U.K?
I am flying a Bind N Fly Bob57 woth 03 unit & Crossfore.
When I get about 360-400 meters away, I’m loosing the HD bars down to about 2 red bars and am scared to continue pushing it further. I still had video and control, it just showed 2 bars HD in goggles.
I’m confused as I see footage of people doing long range with the Bon57, and I’ve bought a 4000mah LiLon iFlight fullsend battery for this reason.
There were zero obstacles beteeen myself and the Bob, and I was still facing towards it so anyone know why I’m getting the red HD things loosing bars at such a short range?
I’d Like to be able to get to around 700 meters at least ideally.
If I do push it and loose connection then I hope my GPS Rescue will kick in, but I’m having to turn back much sooner that I want/need for some specific locations when I’m flying.
I’m new to this stuff coming from normal drones and Avata so it’s all new to me.
Again, it’s a Bob57 + 03 unit and Crossfore. I’m using Goggles 2 and TBS Tango 2.
Any tips or info will be ideal.
Cheers
In Europe/UK, DJI limits the VTX power output to 25mw due to EU/UK regulation. That is what is limiting the range on your O3 system. DJI is able to get your location when you activate/register
the system on the app. This hack will definitely unlock your 03 power, but off course , I will never advise you to go against 🇬🇧 regulation.
@@GBoniFPV so you think this would do the trick if someone was to do this sort of thing in the U.K?
Hey hey. Did you figure out how to fix it? I am having the same issue with bob57. I just did the FCC hack and yet to test it. Should the channels be set to Manual or any specific MHz and channel needs to be selected?
Do you now how to do the hack with the Caddx Vista vtx in combination with the goggles 2? Do we have to place a hack file also on the vista or only hack the goggles?
Thanks!
Hi i did it and when i activate the air unit i gets lots of Mbps bit after a seconds it return to 5 Mbps ...
Thanks. So you say we need to stay in manual mode and not auto. Why is that and what do you base your decision to select a specific channel if on manual mode?!
When flying on auto, the system manages the power output. This is just my speculation based on my experience with the system. The 03 will be witching channel and managing the output power up and down based on the distance between the goggle 2 and the VTX. When running the system on manual mode, you lock the channel to a specific one, and you also lock the output power to the highest level. I have noticed a major improvement on reception quality when running on manual mode compared to auto.
@@GBoniFPV exactly I have the same feeling regarding the manual mode.Seems reception looks more stable. my question now goes what channel and frequency you would choose in order to get best reception.
do you know this still??
@@GBoniFPVoh OK that makes sense. I did the hack but was still on auto. And was getting low mbps in places where I used to have 50mbps before I did the hack.
Does it work with the latest patch released on 25th April? Thanks for the video
Haven't checked. I'm busy with work. I will update you once I test it
@@GBoniFPV 🙏 thanks
thanks! so no changing the output power like the goggles v2 huh?
Work!! Dji Goggle 2 last firmware 01.07.00
I lasted firmware at the time, I will need to check what firmware it is
Work!
what about googles v2?
The goggle v2 use a different hack
Hi, can this be done on Android
I don't understand your questions.
how can i reset the hack?
You only need to set your Goggle to automatic mode.
does it work for google integra
Yes, it will
Any cons to doing this "Hack"
None
What sd card are you using? Thanks
I use U3 or V90 SD card on the VTX( especially for 4k recording) and an U10 on the G2 goggle
@@GBoniFPV hi thanks for the reply happy New year
Thankyou for this.
Not working.. :(
You probably didn't delete the suffix of ham_cfg_support. You need to delete the .txt .bin and other words during renaming and change it to ham_cfg_support.
Why this hack doesn't work on V2 goggles on my dji fpv.Before this hack work but now not anymore.
In knowledge, this hack is for the goggle 2. The V2 requires the old 1200mw power hack
@@GBoniFPV maybe you know wich hack will work for V2 goggles??
@@nejc8a Bardwell has a great video going over this. He goes over all the WTFO hacks you can do, including the 1200mw hack. Highly recommended.
@@lucas_heide maybe you know link of video?
@@nejc8a th-cam.com/video/KuKjWDJ6XeU/w-d-xo.html and th-cam.com/video/63Smmc0bNcg/w-d-xo.html. The second video will only be necessary if you need to roll back the firmware on your goggles.
Tried this and it didnt work, firmware 01.09.0000. Formatted sd in goggles n move ham file to root of sd card n reset goggles. Tried different ham files from 2 different source (rotor riot n mad tech). Driving me nuts. Any suggestions is appreciated
You probably didn't delete the suffix of ham_cfg_support. You need to delete the .txt .bin and other words during renaming and change it to ham_cfg_support.
This dooesnt work anymore after the new update :(
It still works. You need to redo the hack after updating your vtx firmware.
You probably didn't delete the suffix of ham_cfg_support. You need to delete the .txt .bin and other words during renaming and change it to ham_cfg_support.
Hi GBoni FPV, that is the most practical tutorial i've seen. I would like to know your opinion, if I hack my google 2, could I increase the range with goggle 2 and mini 3 pro?
no it only works on o3 Airunits
@@o_mtb1925 That's a shame, I have goggles 2 and mavic 3. Is there any options for hack
now we always have to fly in manual channel mode and choose a specific channel and MHZ, or we just fly in automatic channel mode? thank you!!
The option of selecting a specific channel is useful if u fly with multiple people. Otherwise, the auto option is perfect for solo flyers.
@@GBoniFPV 🙏
Awesome, ill give this a try here in the UK as my Avata /goggles 2 only transmits upto 150m 😢
Did you manage to do it?
yes, works on latest software for Goggles 2 and the Integras I have. I tested range and distance went from 150m to 800m before it started to drop. Long range test, the LIPO6S got me 3.4km before i had to turn around (1600mah)@@ai_guitarist
I did the same step. but mine still showing 1 channel only after inserted the sd card
You probably didn't delete the suffix of ham_cfg_support. You need to delete the .txt .bin and other words during renaming and change it to ham_cfg_support.