I try to make disk cam mechanism, up and Down motion animation as per my way. hope you like it. This is only mechanism idea animation, you can make this mechanism as per your requirement, Thank you for watching
this is really interesting and useful, but is there a simpler and smaller way to do this? I'm trying to make a stick move up and down in this same way.
You make awesome videos, very informative and great animation! Can you post STL files for your designs so they can be 3d printed and tried out in real life. I would like to try to make some of them for fun. Thanks for the great videos! I like all of them and I'm subscribed. 👍
amazing! I have a question if I want the rod to apply pressure in different forces what I should do ? should I play on the spring length or put external loads ? thanks
height adjustment was kind of crude haha. Good animation tho! best would be reducing the diam. of the inner race or outer diam of the bearing to preserve a continuous motion. overly complex tho. why not drive a rod connected to an integral eccentric on the flywheel? a lot less parts and load on the contact surface is spread across the whole diam of the connecting rod/strap. that's why industrial machines came to use eccentric driven pumps to this day since their development owed to steam engine design
Yes, but we have to add one more support in bottom... I will making another animation with adjustable output shaft.. Then u can adjust output shaft in any direction.
@@EngineOn Thanks so much for your response. You have great concepts. Thanks for sharing. Have you actually made them, or did you just animate your concepts? Either way, you did great.
Thank you for this❤️ I googled high and low for the “thrusting up and down” mechanisim and everything led to porn sites😂😂😂 and dildos….this saved my life ….thank you sooooo much
We used to mentally imagine the movement of mechanisms when we were students. Now visualization is made so easy.
Aku suka nonton video ini sangat bermanfaat untuk menambah ilmu saya terimakasih kak telah berbagi ilmunya.... 👍👍👍🙏🙏🙏
Engineers do it in books. You bring it to life with your animation skills. More detailed work. Do come up with new videos.
great & useful video
from Gilgit-Baltistan❤❤😊👍
this is really interesting and useful, but is there a simpler and smaller way to do this? I'm trying to make a stick move up and down in this same way.
You make awesome videos, very informative and great animation! Can you post STL files for your designs so they can be 3d printed and tried out in real life. I would like to try to make some of them for fun. Thanks for the great videos! I like all of them and I'm subscribed. 👍
now that I've clicked, my feed will have endless similar videos
Wow! It is an amazing animation with so many details
up and down is the law of nature without it we cannot born
😜
I approve this mechanism.... Very low friction! (Sound of a huge rubber stamp falling from the sky).
Very thoroughly explained. Nice rig! 👏
Glad it was helpful!
Wow.....Superb animation yaar.
Because u r support. Thanks
amazing animation work, keep it up
Thank you pravin,
Can it move automatically without external force or electricity?
amazing! I have a question if I want the rod to apply pressure in different forces what I should do ?
should I play on the spring length or put external loads ?
thanks
How is this different from having a follower on the outside of the wheel?
This video is unnecessarily more complex
the animation is very good
Love being a mechanical engineer
amazing good idea . thank you !
You are welcome!
For using as wood cutter we have to turn it as above bar is long.
No, with one wheel saw will be stack in wood, for wood cutter need to add blue colour bearing wheels both side of the disk...
Waaw🤩...nice work Dude...👌👍👍
because of your support, thank you
Which program u used
All proud mechanical engineers give one like.
what software did you use for the animation? great video!
Blender & 3dsmax
What advantage does this have against scotch yoke mechanism or slider crank
height adjustment was kind of crude haha. Good animation tho!
best would be reducing the diam. of the inner race or outer diam of the bearing to preserve a continuous motion. overly complex tho. why not drive a rod connected to an integral eccentric on the flywheel? a lot less parts and load on the contact surface is spread across the whole diam of the connecting rod/strap. that's why industrial machines came to use eccentric driven pumps to this day since their development owed to steam engine design
Very Nice
Hi,
Which software did you use to create the animation?
Thank you!
3dsmax and blender
That's nice but how do I make it
Ek no.... Nice work 👍 👍 👍
Thank you so much 😀 yadnesh
Mantap juragan..😍
Great job
Thank you.
Very convenient 👌🏼👍🏽
Thank you ravso..
Please tell me the name of this product.I want to use it in my signage.
Wowww that is cool .
Can you give me PDF that is general procedure to design the mechanism...and calculation part
🤔😳 👍👌 नंबर एक
धन्यवाद भाऊ.. 👍
Nice 1👌
Thank you sujit bhau.
Mechanism perfect.
Presentation perfect.
Animation perfect.
Examples of application more useful.
Nailed it.
Thank you very much!
Which animation software is this ?
Wow amazing
Thank you very much
Kena go gawe mesin colll... Krikkrikkrik 🤩🤩🤩
Which software you use to design such ... Please reply me
3dsmax and blender
Where from we can buy these parts name of That parts
superb video
Thanks 😊 sager
Sir which software is used for animation ..pls tell us the name...pls
Blender and 3dsmax
Woooow! Help me. I need to know what kind software do this animation
3dsmax and blender 👍
Heyy your all videos are awesome
Thank you
What’s doing this called/ what’s the mechanism called?
Nice work 👍
Thank you! Cheers!
Which software u used
Great
Thank you sir
Nice work 👍👍
Thanks 👍
which CAD you use?
Thanks
Kamaaallll 👌👌👌
Thank you. bhau
Best 👌👌
Thanks 😊
Is it something like cam
What is the font name do you uses in this video?
Nice...
Thank you! Cheers!
Wow!
Amazing
because of yours support, Thank you mohan
Gracias por la bendición del 3D
Motivated ideas
Thank you
How much would it be to make one?
Ya know....
A tutorial on making this animation would be great.
Yes, I would like to see a tutorial too.
hawe i get thes mashin of parts
Which software are your using?
Bravo 💓💓
Troppo complicato, sarebbe bastata una camma e il cuscinetto che vi poggia sopra all'esterno.
Sarebbe stata anche molto più robusta e con meno pezzi.
Does it work horizontal?? Thnx,,
Yes, but we have to add one more support in bottom... I will making another animation with adjustable output shaft.. Then u can adjust output shaft in any direction.
Wow
Hi
This 3dsmax and blender to use in only PC or Android
Only pc
Nice
Thank you.
절대로 안되는 말이 안되는 영상이미다
which part you not understand ?
I want this..pls tell me what this price
How to control the speed of this mechanism
Decrease the motor speed..
Are these for sale somewhere?
Need for my grandson. Thanks.
No sir, this is my concept only. you have to make it. thank you so much.
@@EngineOn
Thanks so much for your response.
You have great concepts. Thanks for sharing.
Have you actually made them, or did you just animate your concepts?
Either way, you did great.
Белецкому Игорю показывали это, а то у него сейчас печатный станок простаивает без дела.
I want design analysis for this how I I'll get it
Please provide
Wow ❤️
Thanks
which software is used for the animation
Which software we can animation like this plz suggested
Imagine chocolate factory doing stamp on product.
where can I get these parts
Good
Thank you. Dilip sir
Thank you for this❤️ I googled high and low for the “thrusting up and down” mechanisim and everything led to porn sites😂😂😂 and dildos….this saved my life ….thank you sooooo much
👍👍👌👌
Thanks प्रतीक
good
Thanks
👍👍👌
thanks
Thank you Sir
Sir....may the names of the books, that are the sources of these engineering sketches; be revealed?
I'm fascinated about these engineering structures ... Want to Learn these and explore in detail....
Hi
What software do you use?
For this
Please tell me software name
3dsmax and blender
What is cost?
Imate google translate, jezik je Srpski.
Grafika je Ok ali to radi samo na filmu.
ovisi o snazi motora i napetosti opruge, s jakom potporom od baze, može biti i posao.
Can we used as scoll saw?
No, we have to add one more bearing wheel outside of the disk, then you can use 100% power of motor.
We would like to see the entire device without all this in out up down messabout.
Why not just a camlobe ?
👌👌👍
Software name?
Autodesk 3ds max and blender
Theo mình nghĩ chỉ có Niên sô (nga) mới nghĩ ra thôi
Legal
자연의 법칙은 1+1=1이상이 될수 없다.
you mean to say 1 + 1 = 2
@@EngineOn 자연의 법칙 1=1=1