We find it works best to hook chains on to the tire chains. Some times U have to continue rolling it down hill. A couple times we even used a 3 ton chain hoist to roll a JD 540 back up, with no good machine acess. But like U say always never try to start back up wait a few hours.
Yes liked the Madill too, only one I ever got in and tried to cut with but never would be able to get the speed and precision the northern boys have as companies need the production. Thanks for stopping by, liked a few of your videos.
+Alan Adams They were cutting in dead pine patch and percentage of hardwood was taken by the crew..I was just on my way by when I had a chance to take the clip to share..its goid to have people participate..hope you watched all the video and my comments.
Was rough and tough on the machines, yes, you never know, the machine got the worse of it, wrecked the engine, starting it up not letting the oil run back down, etc. but glad no injuries.
+cabotbluegill Yes, it no longer lives with that engine, didn't leave the oils sit after the tip and took the rods out, these machines are work horses but they need respect as you lose a lot more from down time from this than you would giving it a little love, I know money is more, and drive, drive, but I can't operate that way. Really nice to have your comments and great support respect that, appreciate meeting others with same interest and experience in this area.
I have worked in and around equipment all my life I have seen so much of it destroyed due to poor operators and foolish neglect. My skidder was a 1971 timber jack 230D with a 3- 53 Detroit. I bought it in 1987 and had very few break downs my production was far less than most but the money it earned was mine. I would still have it today I believe in repair and rebuild but in the 1990s log prices dropped so bad I had to get a job to see ends meet. I kept it for a while.
They had a winch but they had broken it, same one that turned the skidder, but as you can see the dozer driver did not even hold the skidder steady until it was upright he just backed away. I am no expert in these matters but a different approach may have been better.
We find it works best to hook chains on to the tire chains. Some times U have to continue rolling it down hill. A couple times we even used a 3 ton chain hoist to roll a JD 540 back up, with no good machine acess. But like U say always never try to start back up wait a few hours.
+Log Dog Its great to hear from experienced operators Thank you for watching..hope to hear more from you.
Oh dam the ol madill 2200, i learned on that buncher,better then any cat buncher out there and Wtf buddy had the boom waay up , no wonder it tumbled!
Yes liked the Madill too, only one I ever got in and tried to cut with but never would be able to get the speed and precision the northern boys have as companies need the production. Thanks for stopping by, liked a few of your videos.
UR killin me smalls EH
+Alan Adams They were cutting in dead pine patch and percentage of hardwood was taken by the crew..I was just on my way by when I had a chance to take the clip to share..its goid to have people participate..hope you watched all the video and my comments.
May be his paints had to be changed but glad nobody got hurt
Was rough and tough on the machines, yes, you never know, the machine got the worse of it, wrecked the engine, starting it up not letting the oil run back down, etc. but glad no injuries.
I am pleased that was not my skidder
+cabotbluegill Yes, it no longer lives with that engine, didn't leave the oils sit after the tip and took the rods out, these machines are work horses but they need respect as you lose a lot more from down time from this than you would giving it a little love, I know money is more, and drive, drive, but I can't operate that way. Really nice to have your comments and great support respect that, appreciate meeting others with same interest and experience in this area.
I have worked in and around equipment all my life I have seen so much of it destroyed due to poor operators and foolish neglect. My skidder was a 1971 timber jack 230D with a 3- 53 Detroit. I bought it in 1987 and had very few break downs my production was far less than most but the money it earned was mine. I would still have it today I believe in repair and rebuild but in the 1990s log prices dropped so bad I had to get a job to see ends meet. I kept it for a while.
the winch on the dozer didn't work? or they not know how to use it
They had a winch but they had broken it, same one that turned the skidder, but as you can see the dozer driver did not even hold the skidder steady until it was upright he just backed away. I am no expert in these matters but a different approach may have been better.
That dozer don't belong in the woods without a winch with a tail chain on it.
Totally the contractor was not prepared for events
Blade wasn't down to stop the rollover, was ither a complacent operator or a rookie
now what ya gona saw it in haf EH
+Alan Adams Probably would have been easier.
What a bunch of rookies, gong show. No chokers anywhere ?
I thought I was watching Axe Men :)
+Dean O lol..sometimes you never know what will happen on a trip out, good show, thanks.
Doubt you'd see a buncher operator moving around with his door open work safe would have a field day
wow.....
It don't take all that just some chains really
Hook the damn chain on the back tire chain and pull ! Skidders flip it's not that big of a deal the ground isn't even that bad
I would fire the dozer operator