That’s so funny, I dropped my brand new 14.5 URGI upper to my gunsmith a month ago to remove the pinned welded Surefire flash hider and replace it with an AAC 51T for use with my AAC M2000 suppressor. I’ve removed pinned and welded muzzle devices before but, I didn’t want risk messing up my new upper.
Accidentally sent geissele support a screenshot of a scripture verse with a picture of my enhanced bolt carrier group I needed some service on. “by their works, ye shall know them.” I felt so awkward but they were so chill about it 😅 Hope they got a laugh out of it
Have a Mod1/TS30A2/AEM5 and I love it. While it has aged quite gracefully I was thinking of a modern version that I wouldn't mind running hard. All the lessons learned from building it out and running it past 600 over the past 18 years, the URGI seems to check most of the checkbox's I'd be wanting. Thanks for the review.
After purchasing a stripped Geissele Super Duty upper and seeing the crappy job they did drilling for the coil pin for the gas block, I'm in the process of rebarreling it myself. Ended up getting a URGI clone from Thoroughbred Armament with the Daniel Defense barrel like the first batches of URGIs.
Have fun at the course. I have taken many cues from your rifle set ups and saved time and money. Btw what two shooting bags were you using and do you have an affordable rear bag recommendation?
Dope setup. I love the NX8 on that URGI upper. How do you like the T3 with that magnification range? Do you find it to be visible enough at 2.5x, or do you think a stacked red dot is necessary? I was thinking about getting the same scope for my SPR, and I love the T3, but I was just curious how well it performs with that magnification range.
@@CutlassOutdoors I would never run my main tube at 2.5. Red dot at 12 is the way for an SPR. I have beers and convo review coming On 3 spr builds with various rds positions that I am still tweaking
@@yipeeiaye well a comparison from a consumer side is coming. I know just enough on the SPR side to be dangerous. 14.5 with 3-18 is impressive however when I was up at Ridgeline one of the guys have a URGI. He had some pretty extreme POI shifts going from bi-pod to barricade. Widnage held perfect. But elevation dropped almost 4”. I will cover this in the conversation. Short answer. If you are wanting a true SPR set up, and with Ridgeline selling the LPR uppers. And the groups guys are posting on the Gasgunfastgun IG account. And the rifle being specifically designed around eliminating flex in the upper. LPR is the way. And yes I paid full price for mine. Since many have assumed I got mine for free. 🤙
If I didn’t already have a 14.5” BCM MK2 I would absolutely pick up a 14.5” G URG-I. Just don’t have a need/want for another 14.5”. I really like the rail so I put a 10” one on a 11.5” build. DDC Looks great paired with a matching charging handle.
![NONT TANONT - ดอกไม้ที่รอฝน (spring) - Reimagined [Live Session]](http://i.ytimg.com/vi/nY2PsFZFEOg/mqdefault.jpg)
I just purchased the Geissele 14.5 CHF based on this review. It will arrive next week. Stoked 🍺
I wish they offered unpinned muzzle devices, or other muzzle devices
Or maybe longer barrels.
As of this week they now have stripped URGI's on their website.
@@apnk6870 no shit really? I just finished building mine piece by piece because I didn’t like the 4 prong.
BCM has those
That’s so funny, I dropped my brand new 14.5 URGI upper to my gunsmith a month ago to remove the pinned welded Surefire flash hider and replace it with an AAC 51T for use with my AAC M2000 suppressor. I’ve removed pinned and welded muzzle devices before but, I didn’t want risk messing up my new upper.
Accidentally sent geissele support a screenshot of a scripture verse with a picture of my enhanced bolt carrier group I needed some service on.
“by their works, ye shall know them.”
I felt so awkward but they were so chill about it 😅
Hope they got a laugh out of it
I agree, it is ridiculously good, it is now my go to.
Have a Mod1/TS30A2/AEM5 and I love it. While it has aged quite gracefully I was thinking of a modern version that I wouldn't mind running hard. All the lessons learned from building it out and running it past 600 over the past 18 years, the URGI seems to check most of the checkbox's I'd be wanting. Thanks for the review.
I've already got a 14.5 BCM "lightweigh,t" and i love it! But I'd be lying if i said i dont want the GEISSELE.
Same here. Love my BCM MK2 but if I didn’t go that rout, this URG-I is amazing.
Very clean
Well done Jeff.
Great view of a great rifle
I’ve been taking this thing out with a 3-15 at 600 consistently more than my 18 inch rifle length
I shoot my 12” 600+ pretty often too
After purchasing a stripped Geissele Super Duty upper and seeing the crappy job they did drilling for the coil pin for the gas block, I'm in the process of rebarreling it myself. Ended up getting a URGI clone from Thoroughbred Armament with the Daniel Defense barrel like the first batches of URGIs.
Would you normall run such a high magnification scope on a 14.5 like this or would you go for something like an LPVO?
I enjoy the 14.5” as well I have the Wilson Combat in .300 blkout with an Omega 300 it’s 🔥
TMI
Have fun at the course. I have taken many cues from your rifle set ups and saved time and money. Btw what two shooting bags were you using and do you have an affordable rear bag recommendation?
Check his site.
@@hezee42 I got a beers and convo review coming on rear bags.
@@hezee42 cheap has draw backs, but I just got one from MDT that I’m really liking. I will cover pros and cons that i have found so far
It's my favorite rifle . Surefire adapters are available to run on different suppressors.
Yeah! I got one of those adapters made by Ecco machining. Took a warden and got it made into an adapter by them.
@rm4googol930 BSDFABWORKX as well. And b&t supressors sells theirs with whatever mounting option you want.
Dope setup. I love the NX8 on that URGI upper. How do you like the T3 with that magnification range? Do you find it to be visible enough at 2.5x, or do you think a stacked red dot is necessary? I was thinking about getting the same scope for my SPR, and I love the T3, but I was just curious how well it performs with that magnification range.
My money's on a big thumbs up
@@CutlassOutdoors I would never run my main tube at 2.5. Red dot at 12 is the way for an SPR. I have beers and convo review coming
On 3 spr builds with various rds positions that I am still tweaking
@@rdrgearcool! Thanks for the response
Flexin - really have been trying NOT to pull the trigger on one. However, I want to see what you think of the Ridgeline LPR vs this set up. Giddy up
@@yipeeiaye well a comparison from a consumer side is coming. I know just enough on the SPR side to be dangerous.
14.5 with 3-18 is impressive however when I was up at Ridgeline one of the guys have a URGI. He had some pretty extreme POI shifts going from bi-pod to barricade. Widnage held perfect. But elevation dropped almost 4”. I will cover this in the conversation. Short answer. If you are wanting a true SPR set up, and with Ridgeline selling the LPR uppers. And the groups guys are posting on the Gasgunfastgun IG account. And the rifle being specifically designed around eliminating flex in the upper. LPR is the way. And yes I paid full price for mine. Since many have assumed I got mine for free. 🤙
Got one on a build someone backed out on.
Is that the .25" magpul riser?
@@TheMikeshannon yes.
What bipod is that?
@@TwoWheelNinja Ridgeline defense badger ordnance collab. 9-13”
Which nightforce is that?
NX8 2.5-20
🤘 😁 🤘
i love mine
Magpul dt maybe a thicc one but I like it
@@MugenZeroX same. Way better lock up on the buffer tube.
It’s actually perfect, quad rail is too big, wedgelock rail is too thin.
If I didn’t already have a 14.5” BCM MK2 I would absolutely pick up a 14.5” G URG-I. Just don’t have a need/want for another 14.5”. I really like the rail so I put a 10” one on a 11.5” build. DDC Looks great paired with a matching charging handle.
Who am I kidding…. I’ll get this one 2
Why not
Focus more on using what I have vs being a collector.
lol I have a 14.5 bcm and I justified getting the 14.5 URGI by making the optics different. Bcm has just a dot. And URGI has a LPVO.
It's 4 prong flash hider not 3.
@@Awesome_1789 i did not even realize I said 3. Good catch
Isn’t that the super duty?
No they have some different parts , mainly the barrel and gas block IIRC.
PWS 14.5”>all
@@Boisezx6r I have shot
Both. Accuracy of
The URGI is better