They completely refuse to allow you to have the joy-cons connected in TV mode. On the home menu, it just makes this "you can't do that" click and when you connect them it doesn't make the snap sound, and it puts the controller sync screen up if you're in a game
Dude, you're literally one of the most helpful TH-camrs ever, any time I've had a question about my Switch I just check your channel and you almost always a video with a very easy to understand answer. Keep up the great work.
I have to buy new joycons AND I HAVE TO REPLACE 2 JOYCON SETS handheld joycons are a waste of money and my original joycons are loose and will not charge
How long did it take for them to send it back? I’m thinking about sending in my switch for repair but I want it to be back by the launch of Super Mario Odyssey.
Nice video! I’m using the tape method for 4-5 months now.. my joycons were loose. They didn’t go off easally, but they were a bit wobbly. Tape works really well.
I realize it "saves money for Nintendo" but did they really not think this through as a bigger problem? Of course Nintendo is going to sell lots of units to adults but I'm sure there's an extremely giant mass of these going to kids.. why not use metal so the constant use wouldn't do this? I'm hoping they end up changing the JoyCons in the future to use metal instead. I take good care of mine but generally kids are going to be kids.
Metal is more expensive to use during manufacture in contrast to plastic. Nintendo rather use cheaper materials than premium material and sell the console at a loss.
I dont knoe what you all guys are doing. I have no problems at all! I even took it to freaking italy and it works perfectly and doesnt lag at all. HOW? Just how???
Thank you so much dude! I just got my switch a few weeks ago and this issue happened just this morning. I was scrambling to find a solution but all of them involved taking it apart. I didn’t want to risk that so I kept on looking. You tape idea was genius! It worked 4 me thank you so much dude
Thank you very much! The super glue one worked perfectly, I did multiple layers, than placed it in it place and slide it a few times, gave it the form and it felt like new, Love you
Thank you so much My Mate VINCE because I have one Loose Joy-Con controller and it's the Left Joy-Con, so I had the problem since 2017 I thought I wasn't able to find a video about the Loose Joy-Con problem...so thanks so much for fixing my Left Joy-Con!
I took a little piece of a Needle, heat it up and push it through the plastic cut it and Glue it, and it works as a wall for the part the plastic that cheap in the joycoms, only problem you have to open the joycoms and take them apart I will maybe upload a video for it
My joy cons had this issue. I got new ones for my birthday, but I still wanted to find out if there was a way to fix my old pair. Lowe and behold, the tape method detailed in this video worked like magic! (I used the normal clear tape instead of fancy reinforced and electrical tape but it still worked). You just earned a sub and a like.
Well hopefully someone makes a metal version of that part because I don't want to replace my joycons or have some weird way to fix it but thanks for the tips (also your voice is pleasing)
MoogleAntwon my dad fricking broke it because he beat me in a game and he pushed me into the dock hdmi cable and it dropped and he’s fricking cussing at me for what he did
The part on the joy-con is plastic so that it won't wear away at the console. Things like this are designed to fail in this way because its better to repair or replace the cheaper part. USB cables are also designed in this way because it's easier to replace the cable than the port on the device
mine were just slightly loose. more so on the left one. i used the tape method and it worked PERFECTLY! just a single tiny square of black electric tape tightened them up nice & snug. THANK YOU!!! thumbs up & subscribed.
This comes from the joy con straps. I think since they fit on so tight and feel like they're gonna break the joy con when you take them off, which is kind of a sign why the joy cons stop fitting on tight. They get a chip in the locking mechanic ( it breaks part of it off), that's why. So just stop putting on the joy con straps
@Techtronis hah! I had that same thought when I bought my OLED yet here I am. I’ve never once even used the straps. I baby my Switch too and yet hardly a year after purchase, I have very loose joycons somehow. The only thing I can figure is that maybe it’s bc I use my Switch in handheld mode 99% of time. I hope you have better luck than me with your OLED.
@Techtronis I do the same however I think from the joycons slipping off when gripping too hard during intense gaming sessions, (lol) they’ve just loosened over time. Really should be able to handle that considering it’s a gaming console intended for kids primarily.
Loki Shooter well you see the only reason why there's a lot of people that are having problems with their Nintendo switch is because they buy it on a day it's released that's why it smart to probably wait for a few months
I bought the Switch ASAP (meaning in a few months), and I treated it with care, but I play ARMS and Super Mario Odyssey a lot, so I use the straps a lot, which wear down the locking mechanism. The design of the Joy-Con has not changed since the Switch was released.
Exactly. They're designed to fail in a manner that is easier to repair. It's easier to repair or replace the joy-con than the console. USB cables are the same, it's easier to replace a cable than to open a phone and replace the connector
What was the case called it has also been 2 years sence you’ve ordered it so if you could can you tell me any problems that really bugged you when you had that case?
It worked a little better with the case it was more sturdier And I did what the video told me to It's to put tape on my Is joycon rail So that worked a little I forget what the case was called though But now I have an OLED and I'm trying to be more careful with it
A combination of the tape + glue methods with the addition of you being very careful about applying / removing the Joycons seems like it would be pretty stable and would last a while. I'd go that route if I couldn't afford new Joycons as I also lack access to a 3D printer. I'm very careful about these sorts of things though, unless a product is naturally prone to wear that you can't avoid I really don't have these issues.
Battleofawesome don't use metal. That will also damage the console. Things like this are designed so the easy to replace part will break before the hard to replace part, and using metal can wear away at the metal rail on the console. Also, I don't think metal can be 3D printed, it has to be molded or machined
If your warranty has expired, I think the best thing to do is to buy a metal replacement for the lock buckle pieces (which are quite cheap) or perhaps 3D print one out of a stronger material. With that said, an quick, easy and cheap solution that I thought of while watching the video that could potentially work is adding a velcro strand to either the actual Switch unit or the Joy Cons (I'd say, probably in the middle of each piece). While adding the velcro strand on both parts of the unit would definitely make a solid connection, I doubt the Joy Cons would slide very smoothly and it could be more on a hassle than anything else, in the end (could still work, though). However, by putting one half of a velcro stand (either the "hairy side" or the "hook side") on the Joy Cons or the Screen unit, it could reduce the friction considerably, being somewhat thick and offering a rugged surface. It would probably be a snugger fit, too. The concept is very similar to the "tape solution" but a bit more durable and efficient... in theory. Note that as I'm writing this, I haven't tried it myself but I'd say it's worth a shot. **Edit:* Maybe putting the same side of a Velcro stand (again, it could be either side) on each part of the Switch would work even better.
Have you been to a new York city. the doctors and Dave, but the only one that I can do to get the most important to you, but the only one that I can do to get the most important to you, but the only one that I can do to get the most important to you,
Hey Vince. Love your Videos dude. Just wanted to ask your advice since you seem like you know a thing or two. I am having issues with my right joycon constantly desyncing when in docked mode with joycons detached. I have tried a lot of things including factory reset, controller update, complete disconnect of controllers, moving away from other appliances etc. Just wondering if you had any ideas short of sending back? Thanks a lot.
Hi there, thanks for the nice comments. Spawnwave did a TH-cam video when the Switch came out where he added a wire in the Joy-Con and it increased the signal range. Hopefully you will find it on his channel. Maybe measure how far it is when it disconnects and then if possible take it into another room and do a range test again just in case you can pin point the source of interference :-)
Awesome thanks mate. Should be able to track it down without too much hassle. Worth giving anything a try at this point. Keep up the great work with the awesome content and thanks again!
My biggest issue with the whole case cover is think of the long term effect of the joycons having pressure applied of pushing and pulling on them when you put case on and take off
My joycons were getting a tad loose and one of them slides out very easily. Did two layers of the black electrical tape and they feel so solid!! Thank you for this tip, will save me buying a new pair straight away!! :)
I’m SOO excited! My mom said if I gave her some of my savings ($200) than she will give me one for Christmas, so I gave her the money. Now I just need to save up for a game or two.
Smartie 72 good luck...... best to buy one now ... during Christmas they will ALL be gone because parents buy their children the switch for Christmas .. you have no idea how many times i hear parents saying they are getting their kid a switch during christmas... its going to be a very sad Christmas for a lot of kids...
well... would only suck if you can't use tabletop mode. i use it either in handheld mode while commuting or as tabletop with the pro controller, using handheld mode works great for odyssey if you don't have to use the few special moves (that i don't really use)
I personally would recommend putting tape on the Joy-Con, rather than the Switch, so that if you get new Joy-Con at some point in the future, it slides off easily when the button is pressed. You can probably find some [insert Joy-Con color here] tape so that it doesn't stand out, or cut black tape to the same width as the Joy-Con rail so that it looks natural.
I highly recommend that everyone that is weary about this issue to press the button down hard when you are pulling them off AND putting them on. The reason the joycons click(the non-artificle click) is because the locking mechanism scrapes the side of the switch. If you press the button down when placing the joy cons ON the switch then it doesn't scrape the lock. If you get into the habit of doing this then you can fix the joy con issue. I have the two matte red joy cons and i would hate to get this problem. Remember to hold down on the button when taking them off and on.
The tape seems to have fixed my problem, at least for now. I was getting constant disconnect issues when playing games that didn't require a lot of fast inputs, like JRPGs and strategy games, so I wasn't moving the controllers a whole lot. But after putting tome electrical tape, voila! I managed to play 5 Smash matches in a row and no connection issues whatsoever. The right Joy-con (the one with the issues) can still be removed without pressing the buttons and it still disconects if I move it up a bit, but it's tight enough that even more intense play sessions don't provide enough force to do so. What I'm worried is that the tape is getting a bit wrinkled due to how tight it is, so I might need to replace it from time to time. Not a huge issue to replace it, but I don't want to damage my console or controllers because of this. Thanks for the tip anyways!
this just happened to me today RIGHT NOW at 9:45 PM my switch fell off my desk and this started happening to my pink joycon and not the green i found the problem the thing that when u press the button it goes inside but it was worn and part of it was white. the other one was perfectly OK but u know the tape one u know how it took force to get it off? it was the same condition as my switch's pink joycon (i have the splatoon 2 bundle) and it takes alot of money to restore these and the green one is fine sooooo wat do i do
@matt why dont you shut the fuck up. In these difficult moments its good to laugh once in a while, so if you dont have anything nice to say, DONT SAY ANYTHING
I actually discovered a new method myself, ironically while watching this video. Take a safety pin, and the needle part should be long and thin enough to get into the small space, and just stab the needle into the joycon pin, UNDERNEATH the worn part. This sort of flattens it out, and accidentally solves the problem. I did the same drop test, but I have not tried exerting force into the joycon as I dont want to undo my fix, but it does seem to solve the loose joycon problem.
Οh man..I thought I was doing such a good job at taking care of my switch when I apparently wasn't..Where I live we don't have a nintendo support centre so..I'm screwed..Here goes another 65$ I guess..
I’m glad to know it’s a joy con problem rather than a problem with the console itself . It’s a lot cheaper to get new pair of joycons worst case scenario than to get a whole new system .
I just dont get it how everyone is doing that. Are you guys like, throwing it against a wall 20 times a day? I have no problems AT ALL. I took my switch to so many vacations and play much on it. I even took it to the beach in italy. Nothing is broken, no lags at all. I dont get it. I think Nintendo did a perfect job there.
I don't have the problem my self but I know why it's happening my brother let a friend try his the lock button wasn't hit now the joycons don't hold the buttons need to be pressed
I got a new joycon and I just removed the button that takes it off and there's a little thing you can push when the buttons not there and I just grab a pen or something to press on it so I can release the joycon
Just curious, my left Joy-Con is able to be taken off with a bit of force without pressing the button and is chipped. It doesn’t just slide off, but you can knock it off with your knuckle or push hard enough. So can I still try to have it fixed or replaced (if I have a warranty, it was a Christmas gift) or do I have to deal with it?
Does anyone else love the snap sound it makes when you put the joycons in the switch because I do
YEEEEEEEES!
They completely refuse to allow you to have the joy-cons connected in TV mode. On the home menu, it just makes this "you can't do that" click and when you connect them it doesn't make the snap sound, and it puts the controller sync screen up if you're in a game
Les King ok
Yes its so satisfying
good o'l me plant yes I always Pull mine off and on and off and on and off and on... you k ow what I mean
The thumbnail could be a meme format.
Oh shit
U right
Ralsei with a gun hi
its was at that moment when vince knew,he f**ked up
To be continue...
Dude, you're literally one of the most helpful TH-camrs ever, any time I've had a question about my Switch I just check your channel and you almost always a video with a very easy to understand answer. Keep up the great work.
Yeah,those people who try to make all of technology working should follow this amazing youtuber's guidedance!
Eh.. I've wanted new joy-cons anyway..
*cries in poor*
I dont even have a switch and I'm watching this video
Cries in even more poor
WaluigiGames i have a switch with red blue joy cons but I wanted black joy cons
*cries in poor*
I don't have a light switch
*Cries in homeless*
I have a switch but dont have the animal crossing version...
*cries in poor and regret*
I have to buy new joycons AND I HAVE TO REPLACE 2 JOYCON SETS
handheld joycons are a waste of money and my original joycons are loose and will not charge
The tape hack really helped with the problem of my switch, thank you for making this video!
keep up the good work!
Send it in to Nintendo for repair. I did that and they fixed it free of charge!
Stephen Elías Coffman But that's far less entertaining and it feels less of yours.
How long did it take for them to send it back? I’m thinking about sending in my switch for repair but I want it to be back by the launch of Super Mario Odyssey.
BLEK YODA SWAG same emailed nintendo askin that no reply😪
Dani You can either go online and set up a repair en-americas-support.nintendo.com/app/contact or call 1-800-255-3700 and set up a repair that way.
They didnt for me so the store just gavw me their demo joycon
Nice video! I’m using the tape method for 4-5 months now.. my joycons were loose. They didn’t go off easally, but they were a bit wobbly. Tape works really well.
How often do you need to replace the tape?
Maxwell Webster not often. I changed it out once, becaus ei wanted new tape, but you don’t really have to change it out much.
Okay thanks, I will buy some tape tomorrow. Any specific recommendations? or the kind used in the video?
What's the tape you used? I can't hear the name of the first tape
“Or you put the strap on wrong” Yep well that explains it.
i did that when i got my switch, i know that fell. threw the straps in the trash.
This is happening to me and I put on my straps correctly. My friend put it on wrong to mess with me, (one time).
Battleofawesome idiot
Nino if you actually don't know how to put straps on you're a fucking idiot
A Real Meme like you
Am I the only one that takes care of their switch like if it was its child? 😂😂
I've dropped mine so many times
I do too xD
I do but I've dropped mine once and it hit my metal bed post and screwed up the joycon, just glad the system itself is ok
SplatoonFan [吹奏楽
h
“Ill make sure the button can still be depressed” 12:27
XP
Depression
The button has crippling depression 🤣
That’s why it’s not working
I should've been a button..
Thanks for uploading this video. I somewhat had this problem and needed a fix.
Am I the only one watching this without a switch
AnnoyingRains games no
AnnoyingRains games no
No
AnnoyingRains games no
No
I realize it "saves money for Nintendo" but did they really not think this through as a bigger problem? Of course Nintendo is going to sell lots of units to adults but I'm sure there's an extremely giant mass of these going to kids.. why not use metal so the constant use wouldn't do this? I'm hoping they end up changing the JoyCons in the future to use metal instead. I take good care of mine but generally kids are going to be kids.
.
When i get mine i will treat it like a baby
9snaker Maybe it's partially the console too and not just the controller
Metal is more expensive to use during manufacture in contrast to plastic. Nintendo rather use cheaper materials than premium material and sell the console at a loss.
I dont knoe what you all guys are doing. I have no problems at all! I even took it to freaking italy and it works perfectly and doesnt lag at all.
HOW? Just how???
Thank you so much dude! I just got my switch a few weeks ago and this issue happened just this morning. I was scrambling to find a solution but all of them involved taking it apart. I didn’t want to risk that so I kept on looking. You tape idea was genius! It worked 4 me thank you so much dude
Thank you very much! The super glue one worked perfectly, I did multiple layers, than placed it in it place and slide it a few times, gave it the form and it felt like new, Love you
Damn, good detective work. This is like a definitive guide on this issue. Comprehensive. Great work. Subscribed.
Thank you so much My Mate VINCE because I have one Loose Joy-Con controller and it's the Left Joy-Con, so I had the problem since 2017 I thought I wasn't able to find a video about the Loose Joy-Con problem...so thanks so much for fixing my Left Joy-Con!
Kinda late, but the switch came out in early 2018 :/
Slimey *eham* im late to but eeehm the switch came out march 3 2017
I took a little piece of a Needle, heat it up and push it through the plastic cut it and Glue it, and it works as a wall for the part the plastic that cheap in the joycoms, only problem you have to open the joycoms and take them apart I will maybe upload a video for it
mbison7combo please do so!
Do itttt
mbison7combo probably not the best day of looking for plans to
You are
You are not l
You got
You probably don’t want anything fancy l
I Am the other MVP
Let me know when your schedule let us out prett
I Am Lloris I is not
Love the way Ilfracombe
You got
You
You are not p
You can
You ppt p
You
I’m
You pll
You pl
You’lll
Llllpl
My
Pllpll
llllplp
Pl
My joy cons had this issue. I got new ones for my birthday, but I still wanted to find out if there was a way to fix my old pair. Lowe and behold, the tape method detailed in this video worked like magic! (I used the normal clear tape instead of fancy reinforced and electrical tape but it still worked). You just earned a sub and a like.
The tape one seems solid, great video mate thanks for the help!
"You're going to have to do a lot of flicking to get that off"
Well hopefully someone makes a metal version of that part because I don't want to replace my joycons or have some weird way to fix it but thanks for the tips (also your voice is pleasing)
its not the joy cons that are doing it its the switch is like he said.
raidel morejon its the joy cons failing not the swtich
MoogleAntwon my dad fricking broke it because he beat me in a game and he pushed me into the dock hdmi cable and it dropped and he’s fricking cussing at me for what he did
The part on the joy-con is plastic so that it won't wear away at the console. Things like this are designed to fail in this way because its better to repair or replace the cheaper part. USB cables are also designed in this way because it's easier to replace the cable than the port on the device
there is a metal one of the part. I found it on aliexpress
mine were just slightly loose. more so on the left one. i used the tape method and it worked PERFECTLY! just a single tiny square of black electric tape tightened them up nice & snug. THANK YOU!!! thumbs up & subscribed.
Well done, thanks for the Sub :-)
I bought the same handheld case. It is fantastic. Love the grips.
This is really helpful,because when it first happened to me,I got really worried because I didn't know what was happening with my switch
This comes from the joy con straps. I think since they fit on so tight and feel like they're gonna break the joy con when you take them off, which is kind of a sign why the joy cons stop fitting on tight. They get a chip in the locking mechanic ( it breaks part of it off), that's why. So just stop putting on the joy con straps
@Techtronis hah! I had that same thought when I bought my OLED yet here I am. I’ve never once even used the straps. I baby my Switch too and yet hardly a year after purchase, I have very loose joycons somehow. The only thing I can figure is that maybe it’s bc I use my Switch in handheld mode 99% of time. I hope you have better luck than me with your OLED.
@Techtronis I do the same however I think from the joycons slipping off when gripping too hard during intense gaming sessions, (lol) they’ve just loosened over time. Really should be able to handle that considering it’s a gaming console intended for kids primarily.
Am I the only one that realizes how rough he's being with the joy con and switch. He's putting them on too fast and hitting the switch.
Same
I was thinking this the whole time. I mean, no wonder your joy cons are broken. He was rough even with the new ones. Sheesh.
Alexandro Adriano ok but, he is literally breaking the system mire
Alexandro Adriano plus your literally 7
Galactic VR dude the switch is made for kids so it’s pretty though so it’s okay
I feel like I'm the only one that's had ZERO problems with my Switch so far
Loki Shooter well you see the only reason why there's a lot of people that are having problems with their Nintendo switch is because they buy it on a day it's released that's why it smart to probably wait for a few months
I bought the Switch ASAP (meaning in a few months), and I treated it with care, but I play ARMS and Super Mario Odyssey a lot, so I use the straps a lot, which wear down the locking mechanism. The design of the Joy-Con has not changed since the Switch was released.
Same but I had almost did it on purpose cause I put joy con bakwords so I didn't do it well
The only problem I have is while my joycon in handheld sometimes it think it not in switch
Loki Shooter You're lucky.
tbh your such a nice guy, thanks for making these videos mate, really appreciate your help and effort
The tipp with the tape was the best and cheapest way thank you
I think having the hinge made of metal could damage the switch itself instead of just the joycon if dropped... I guess that's why they're plastic
Adri Vaquero or to keep it cheap lol.
the rails are made of metal
Exactly. They're designed to fail in a manner that is easier to repair. It's easier to repair or replace the joy-con than the console. USB cables are the same, it's easier to replace a cable than to open a phone and replace the connector
I ordered a switch case on Amazon I'm really looking forward to it hopefully the joycons will seem a little more secure when I play in hand-held
What was the case called it has also been 2 years sence you’ve ordered it so if you could can you tell me any problems that really bugged you when you had that case?
It worked a little better with the case it was more sturdier And I did what the video told me to It's to put tape on my Is joycon rail So that worked a little I forget what the case was called though But now I have an OLED and I'm trying to be more careful with it
The thumbnail, for some reason, seems hilarious to me.
the main point here is not to wack it off or wack it on. good video my man
A combination of the tape + glue methods with the addition of you being very careful about applying / removing the Joycons seems like it would be pretty stable and would last a while. I'd go that route if I couldn't afford new Joycons as I also lack access to a 3D printer. I'm very careful about these sorts of things though, unless a product is naturally prone to wear that you can't avoid I really don't have these issues.
Well try not slamming it into your console like you do at 1:40 that might help lol
XD that`s pretty funny but that is also not the problem.
But it does cause the loose joycon problem
frs some people just dont take good care of theyre consoles
People are far more abusive to consoles and this issue happens with even the most protective users
I think you mean 1:39
Good on you for giving that smaller youtube channel t hy w credit he deserves.
At school my teacher is isn't too strict about the 3D printer. We just need to know how to do it, which I do. 🤔 Good thing he likes me.
Lennon Wagner, how the fuck does this comment have anything to do with this video?
TheDubstepBoss
Everything. The man in the video suggested 3d printing a replacement of the joycon lock.
TheDubstepBoss dumb
he said it`s great some one could 3d print metal locks in the video, and to a lesser degree sell them on ebay
Battleofawesome don't use metal. That will also damage the console. Things like this are designed so the easy to replace part will break before the hard to replace part, and using metal can wear away at the metal rail on the console. Also, I don't think metal can be 3D printed, it has to be molded or machined
Nice one, dude you've solved a problem for my boy's Switch.
If your warranty has expired, I think the best thing to do is to buy a metal replacement for the lock buckle pieces (which are quite cheap) or perhaps 3D print one out of a stronger material. With that said, an quick, easy and cheap solution that I thought of while watching the video that could potentially work is adding a velcro strand to either the actual Switch unit or the Joy Cons (I'd say, probably in the middle of each piece).
While adding the velcro strand on both parts of the unit would definitely make a solid connection, I doubt the Joy Cons would slide very smoothly and it could be more on a hassle than anything else, in the end (could still work, though). However, by putting one half of a velcro stand (either the "hairy side" or the "hook side") on the Joy Cons or the Screen unit, it could reduce the friction considerably, being somewhat thick and offering a rugged surface. It would probably be a snugger fit, too. The concept is very similar to the "tape solution" but a bit more durable and efficient... in theory. Note that as I'm writing this, I haven't tried it myself but I'd say it's worth a shot.
**Edit:* Maybe putting the same side of a Velcro stand (again, it could be either side) on each part of the Switch would work even better.
Alonzo
You make good NS videos :D!
Yogo Cipher
Dats true.
NS = Nationalsozialismus which means nazis
INK Lenny here’s an example of an intellectual.
lara hehe
@@lennyjjba NS= NINTENDO SWITCH
8:45,
That's my favorite solution to fix my loose Joy-Con Lock 😃
Have you been to a new York city. the doctors and Dave, but the only one that I can do to get the most important to you, but the only one that I can do to get the most important to you, but the only one that I can do to get the most important to you,
@@davidwood5644 wha the fuck
Alex Vitek he has a stroke
Rebuild the worn out parts with epoxy. It's how I fix loose N64 Control Sticks.
Extra Deluxe Really? That's extremely impressive if true.
Gimme ur N64
Hey Vince. Love your Videos dude. Just wanted to ask your advice since you seem like you know a thing or two. I am having issues with my right joycon constantly desyncing when in docked mode with joycons detached. I have tried a lot of things including factory reset, controller update, complete disconnect of controllers, moving away from other appliances etc. Just wondering if you had any ideas short of sending back? Thanks a lot.
Hi there, thanks for the nice comments. Spawnwave did a TH-cam video when the Switch came out where he added a wire in the Joy-Con and it increased the signal range. Hopefully you will find it on his channel. Maybe measure how far it is when it disconnects and then if possible take it into another room and do a range test again just in case you can pin point the source of interference :-)
Awesome thanks mate. Should be able to track it down without too much hassle. Worth giving anything a try at this point. Keep up the great work with the awesome content and thanks again!
My biggest issue with the whole case cover is think of the long term effect of the joycons having pressure applied of pushing and pulling on them when you put case on and take off
could you do one of why is my joycons moving by itself
the big problem is Nintendo doesn't have support in my country ;..(
Me too I'm in Egypt
I'm in Virginia
Me Too I Am Indian But Still I Can Buy It In Some Shops
Me too I’m in Jordan 🇯🇴
I’m in indonesia,
us eshop is expensive af
What about when the joy stick moves on its own
Mine sligjtly moves up
And when i try to move it up it doesnt move
Or it moves way too much
The one And only it’s called joy con drift it’s common with old joy cons or joy cons that have been used a lot
Slightly*
You’re welcome
Dude I thought TH-cam will never have these type of videos thank u:)
My joycons were getting a tad loose and one of them slides out very easily. Did two layers of the black electrical tape and they feel so solid!! Thank you for this tip, will save me buying a new pair straight away!! :)
Yours are loose but mine are like glued or something I need to have a whole SWAT team to get them off
I’m SOO excited! My mom said if I gave her some of my savings ($200) than she will give me one for Christmas, so I gave her the money. Now I just need to save up for a game or two.
Smartie 72 good luck...... best to buy one now ... during Christmas they will ALL be gone because parents buy their children the switch for Christmas .. you have no idea how many times i hear parents saying they are getting their kid a switch during christmas... its going to be a very sad Christmas for a lot of kids...
Death March I know, I keep telling my mom that, I’ll tell her again, maybe I can get her to purchase it 5-10 days before Christmas.
Smartie 72 bro, you are gonna need to buy it earlier than that. You might be lucky to find a switch cause of Mario Oddesey and some other games.
Smartie 72 try before next Friday (Odysseys realease)
Do you have any problems with the switch?
4:00
WHAT ARE YOU DOING!?!?
DON'T SHAKE THE BABY!! 😱
🤦
Your baby 😃🤣😂🤣😂🤣
@@BrodgttiProductions OMG ITS BRODGTTI!
@@deadacclol5061 hello
@@BrodgttiProductions I am a B I G fan!
Thank you so much!!! Solved the problem by using the tape!!!! ❤️❤️❤️❤️
The tape solution works especially with double sided tape thanks for the help,here's the sub
“Buy new joycons”
“Spends 60 bucks on drifting joycons
I agree buy new ones dont rig themu
In game stop you can go to buy new ones and get a discount if they break you can get new ones for 10$ both
Shush weeb
@@meee6584 wow calm down jamal
My mate vince invented the Nintendo switch lite
The case would suck for odyssey *THIS IS ONLY MY OPINION*
omg an opinion on the internet somebody call the police
I love how he has to tell us its a opinion. Its like his opinion is the only correct opionion.
thatRaGe thanks!
well... would only suck if you can't use tabletop mode. i use it either in handheld mode while commuting or as tabletop with the pro controller, using handheld mode works great for odyssey if you don't have to use the few special moves (that i don't really use)
thatRaGe whats an opioion
The thumbnail is so perfect
I personally would recommend putting tape on the Joy-Con, rather than the Switch, so that if you get new Joy-Con at some point in the future, it slides off easily when the button is pressed. You can probably find some [insert Joy-Con color here] tape so that it doesn't stand out, or cut black tape to the same width as the Joy-Con rail so that it looks natural.
I would get a new set of joycons, but i have the splatoon2 edition and am not willing to get a new pair of them
Yeah cut they cheap
They sell joycons the same color as the splatoon2 editon joycons
12:27 make shire the button can still be depressed
BoyMeetsPug23 lol don’t copy comments
@@africancouscous all they are doing is repeating what he said😐
@@Blue93737 yeah it’s really annoying seeing people copy it too many times
8:24 close your eyes and listen to Vince putting his fingers in there
I highly recommend that everyone that is weary about this issue to press the button down hard when you are pulling them off AND putting them on. The reason the joycons click(the non-artificle click) is because the locking mechanism scrapes the side of the switch. If you press the button down when placing the joy cons ON the switch then it doesn't scrape the lock. If you get into the habit of doing this then you can fix the joy con issue. I have the two matte red joy cons and i would hate to get this problem. Remember to hold down on the button when taking them off and on.
The tape seems to have fixed my problem, at least for now.
I was getting constant disconnect issues when playing games that didn't require a lot of fast inputs, like JRPGs and strategy games, so I wasn't moving the controllers a whole lot. But after putting tome electrical tape, voila! I managed to play 5 Smash matches in a row and no connection issues whatsoever. The right Joy-con (the one with the issues) can still be removed without pressing the buttons and it still disconects if I move it up a bit, but it's tight enough that even more intense play sessions don't provide enough force to do so.
What I'm worried is that the tape is getting a bit wrinkled due to how tight it is, so I might need to replace it from time to time. Not a huge issue to replace it, but I don't want to damage my console or controllers because of this.
Thanks for the tip anyways!
My little annoying ass cousin broke my joy cons... I hope this video can fix it
Holy Orange that's why I don't let people use my electronics Unless you're a good friend who isn't rough you can gtfo
Holy Orange Fix the cousin?
Oh, in English that joke doesn't have sense, bc you said „it”…
Me too my cousin broke my left joy-con ... but he 's not an ass annoying cousin :(
i have an 8 year old cousin, and I let him play with me but I would never let him borrow it
That's why I keep my switch away from lil kids family members lol.
Love that thumbail
Golden Gaming xD
Víctor-Kun Did you just *E C K S D E E?*
Here I am, playing the Nintendo switch at the bridge. Oh wait, take a picture of me! **stretches out arms**
Weeeeeeeeeeeeeeeeeeeeeesplash
tape worked fine for me thanks and my joycon is also pairing in handheld mode thanks again
this just happened to me today RIGHT NOW at 9:45 PM my switch fell off my desk and this started happening to my pink joycon and not the green i found the problem the thing that when u press the button it goes inside but it was worn and part of it was white. the other one was perfectly OK but u know the tape one u know how it took force to get it off? it was the same condition as my switch's pink joycon (i have the splatoon 2 bundle) and it takes alot of money to restore these and the green one is fine sooooo wat do i do
I dont have this problem
Because I dont have a switch ._.
Same
._.
I like turtles lol
@@mau.rdzzzz hahhahhahaha
@@John-ez6rc shut the fuck up it ain't funny
@matt why dont you shut the fuck up. In these difficult moments its good to laugh once in a while, so if you dont have anything nice to say, DONT SAY ANYTHING
*T A P E*
Oh I just clicked I didn't know it was on the video
Tredon Aldridge Lol
It fixes everything
Thehoundbeast It doesn't fix
Literally broken shot guns in fortnite
*L A M P*
Why am I watching this? I don't even have a Switch!
Maddy Bays same here I just have a wii u
Then don’t post a fucking comment
That was a month ago I do now
Maddy Bays me too
Lol
I know that I don’t have a Nintendo switch but I am enjoying the videos
I actually discovered a new method myself, ironically while watching this video. Take a safety pin, and the needle part should be long and thin enough to get into the small space, and just stab the needle into the joycon pin, UNDERNEATH the worn part. This sort of flattens it out, and accidentally solves the problem. I did the same drop test, but I have not tried exerting force into the joycon as I dont want to undo my fix, but it does seem to solve the loose joycon problem.
Student: hey man, can u take off the joycons so i can play smash?
Me: nah, sorry
Student: *thumbnail*
Rajaceratops YEEEET
My switch is not even a week old :( and the the blue joycon is loose already ☹️
same bro,same,exactly the same
Me to
Why am I watching this I haven't got a switch lol
#2 saved my life! thank you
These are perfect! It’s great for a temporary fix until I have the money to buy some new ones
Οh man..I thought I was doing such a good job at taking care of my switch when I apparently wasn't..Where I live we don't have a nintendo support centre so..I'm screwed..Here goes another 65$ I guess..
Why am I even here I don’t even have a switch
KrutasTM same
same but I'll have one at Christmas
is it me or his switch looks like its bend
I’m glad to know it’s a joy con problem rather than a problem with the console itself . It’s a lot cheaper to get new pair of joycons worst case scenario than to get a whole new system .
really good ideas!
I got a switch from Santa and I loved it today one of the joy cons kept coming of I cried and cried then I realised I didn't click it on properly!😂😂
Santa doesn't get me presents anymore🙃
NeatoN he/she is just a kid so let him/her be a kid
The Pkmn Channel I feel bad about posting that and was going to delete it but I forgot the video
I just dont get it how everyone is doing that.
Are you guys like, throwing it against a wall 20 times a day?
I have no problems AT ALL.
I took my switch to so many vacations and play much on it. I even took it to the beach in italy. Nothing is broken, no lags at all. I dont get it. I think Nintendo did a perfect job there.
I don't have the problem my self but I know why it's happening my brother let a friend try his the lock button wasn't hit now the joycons don't hold the buttons need to be pressed
Maceon Frampton
W I T C H C R A F T
Then again, I give my switch to my younger brother to play with...
I don't throw it.
My 6-year old brother does when he dies in a game.
You really don't like your switch do you
What is the 7:28 case pls link me to it I wanna buy that exact one also this video helped me out a lot pls pls please please link me the case
I bought a yellow set of joycons and it helped Thanks vince :)
thank you, I just try the tape method and it work perfect
I love this video dude ❤️❤️
Another thing that helps with Loose JoyCons: Tighten the screws on the Switch Rails where the JoyCons slide in. The screws help create friction.
MAAAAN, what a lifesaver, the spuer glue techinque was the best for me only downside is that now i dont hear one of the orgasmic clics
I got a new joycon and I just removed the button that takes it off and there's a little thing you can push when the buttons not there and I just grab a pen or something to press on it so I can release the joycon
I love the thumbnail so much
Nice bed cover Vince
This is exactly what I needed thanks so much
THANKS VERY MUCH I NEEDED THIS
Just curious, my left Joy-Con is able to be taken off with a bit of force without pressing the button and is chipped. It doesn’t just slide off, but you can knock it off with your knuckle or push hard enough. So can I still try to have it fixed or replaced (if I have a warranty, it was a Christmas gift) or do I have to deal with it?