Good video, I’ll be attempting this soon. Can you do a step by step video on how to do timing chain replace on cx-5 2.5L 2016 because that’s what I have
you don't blow the dust, but suck it up with a vaacum.. exactly when you lifted the filter assembly at @3:55, you let many dust get into the fuel. duh!!!
Hello. I have a 2020 Mazda CX 3. 165,000 km. The last 80,000 I have used the fuel tank almost to the bottom most of the time and I've been having problems for a few days now. I am looking for a new part right now but it is expensive. Or I am not sure which one to buy. Can I directly buy the fuel pumps of the same Mazda CX 3 model and install them? I found 2017 and 2016. The car is in motion, no problem. It sometimes vibrates while waiting. It turns on the yellow engine light.
I noticed you didn't actually replace the filter material, the triangle padding at the bottom, but you replaced the inner housing, wouldn't it make sense to do the opposite? Just replace the filter padding material itself, and just clean the plastic housing? Btw which type of grease would you use for the O-rings that won't contaminate the gas, but still do it's job by lubricating?
Did you clean the filter on the bottom of the orange piece before you put it back on? It looked really dirty initially, then when you put it back on, it looked much cleaner.
EL conector (cable negro mayor grosor) quedo por fuera y no por dentro ..mirar como están al principio y como lo dejo ...aguien que lo conforme...gracias
isn't the actual filter inside the round housing the 2nd filter at the bottom is just a extra precaution to stop stuff before the actual filter that's why he just cleaned it
to me, I will replace the fuel filter when the tank is only 1/3 left :D . Thank Carfix.
Good video, I’ll be attempting this soon. Can you do a step by step video on how to do timing chain replace on cx-5 2.5L 2016 because that’s what I have
you don't blow the dust, but suck it up with a vaacum.. exactly when you lifted the filter assembly at @3:55, you let many dust get into the fuel. duh!!!
Hello. I have a 2020 Mazda CX 3. 165,000 km. The last 80,000 I have used the fuel tank almost to the bottom most of the time and I've been having problems for a few days now. I am looking for a new part right now but it is expensive. Or I am not sure which one to buy. Can I directly buy the fuel pumps of the same Mazda CX 3 model and install them? I found 2017 and 2016. The car is in motion, no problem. It sometimes vibrates while waiting. It turns on the yellow engine light.
I noticed you didn't actually replace the filter material, the triangle padding at the bottom, but you replaced the inner housing, wouldn't it make sense to do the opposite? Just replace the filter padding material itself, and just clean the plastic housing? Btw which type of grease would you use for the O-rings that won't contaminate the gas, but still do it's job by lubricating?
That housing IS the actual filter. That bottom mesh is a screen, which, if it were me, I would clean.
Can the filter screen be replaced also??
Also a head gasket change video to if possible I just wanna learn 😅
Did you clean the filter on the bottom of the orange piece before you put it back on? It looked really dirty initially, then when you put it back on, it looked much cleaner.
Any answers to your question yet? I have the same concern.
@@popeyevallshe tells you he cleaned it in the video lol
Bro drove straight from the fuel station to the mechanic!
Does motor socket power supply postition matter? I am afraid misplace the right to the leff
When you pulled it out of the tank, the excess flexible fuel inlet line was inside the housing. On reassembly it is not inside.
I noticed that too.
Thank you very much
Good job 👏 👍
EL conector (cable negro mayor grosor) quedo por fuera y no por dentro ..mirar como están al principio y como lo dejo ...aguien que lo conforme...gracias
How often you should change it?
80000km
Handbook service schedule says 150000km
Around every 3 years
Noticed routing of fuel hose wrong on the outside and why not replace the strainer?
where can i find this part? may ihave the adress? TY
Repco
Perfect
I’m also aware that the housing has a different filter element inside of it.
عمل جيد
you left the fuel hose outside the can.
You only cleaned the filter and replaced the housing. To me that was a waste of money.
isn't the actual filter inside the round housing the 2nd filter at the bottom is just a extra precaution to stop stuff before the actual filter that's why he just cleaned it
That is really a stupid design.