so did the ARP studs & cometic gasket kit come with the complete kit or did you order separate? i’ve been following your channel & im tearing down my 400ex tomorrow the link that i found was $579 on ebay & BP racing just wanna make sure thanks!
Every time I see some good footage of your pops’ yard , I drool! LOL such a great looking piece of property and you can tell he takes much pride in it 👍🏼
I got my stage 2 hot cam, new in box from someone for 75 bucks! He had it then decided to go stage 3, he had it for years never used. I love it in my 440ex, its a beast. Great vids 👌 👍 👏
like that you make this video, this gives a good idea of what to expect with cheaper parts and the total cost! Love every videos of that series can’t wait for the next one! Keep it up man🤟🏻🤟🏻
The only part i didnt see listed was your brake caliper and caliper cooler? What brand is the cooler and does it help? Thanks and loving these 400ex videos i grew up on one had it bored 416 hot cams and pipe so its fun seeing you go further into the build!
@@MichaelSabo hard reality of it. People beat the breaks off stuff then post it for more than they paid without putting a dime into it. Or screw you out of the paperwork so it's pretty much useless anyway
The way this motor is setup it is probably faster than a good deal of 440s. It has to do with the flow capabilities and limitations of the head; I'm going to be messing with a 435 to see if I can get beyond the flow limitations.
Hey I have a 400ex that is due for a rebuild and was wondering if you have to special order the je piston for the 12:1 with the kit or does it come with it? Love the videos btw👍🏼
Hi man I have a question I put a 416 kit in my 400ex and it’s always pings on a load and I run 93. And it seems like it’s getting worse what do you think is the problem
Yea I bought a brand new yoshi for my 400x and the tubes were way bigger on the header the factory looked tiny next too it and yoshi normally not one of the biggest exhausts if you know what I mean
so yeah a Xring/Oring chains are for people like me who are lazy and dont oil often there chain... cause i have non oring chains for dirt bikes and i do put some oil on them time to time but dont clean them ever..; tried to clean a Oring chaine once that is a pain in the ass... cause i sprayed it with OFFROAD water resistant Michelin oil.. that stuff sticked to every thing and all the dust god on it... and the hole chaine became BROWN from dust... so never using that again..
Chapters and links below! Thank you for following the 400 project!
Chapters
0:00 - Showcasing the 400
0:51 - Intro
2:35 - Going over expenses and mods
11:55 - Take off parts sold
12:19 - Conclusion/Closing
Parts in This Video
Big Bore Kit - bit.ly/3dBAz4M
Piston - bit.ly/2QkEmuB
ARP Stud Kit - bit.ly/32zW8wp
Cam - bit.ly/3nabOQE
Complete Kit - bit.ly/3ekaExL
Muffler - bit.ly/3eoYKTc
Header - bit.ly/3eiOdcl
Clutch - bit.ly/3gtUjcI
Bearing Carrier - bit.ly/3sEpLHw
Sprocket - bit.ly/3dEMAGY
Tusk Battery - bit.ly/3aPQaw5
Grips - bit.ly/2Ngp5cT
Chain - ebay.us/ggp4k3
Better Gaskets - bit.ly/3nydO57
Brake Pads - ebay.us/mlmAEJ
Bar Pad - ebay.us/bQAhjt
Petcock - ebay.us/51oAVq
Seat Cushion - bit.ly/3u4iHWh
Honda Needle Valve - bit.ly/332yUiA
Grip Glue - bit.ly/2PFDLn2
37mm Carb - ebay.us/XGEKgr
NOT RECOMMENDED
10$ Gaskets - ebay.us/ZbpgCT
so did the ARP studs & cometic gasket kit come with the complete kit or did you order separate? i’ve been following your channel & im tearing down my 400ex tomorrow the link that i found was $579 on ebay & BP racing just wanna make sure thanks!
U should do a ltr 450 build 😃 love the videos btw
I'd love to do an LTR and thank you bro! 🤘
@@MichaelSabo would love too see it 2
Mike if you get anymore swole we’re gonna need a gym wars series too
Every time I see some good footage of your pops’ yard , I drool! LOL such a great looking piece of property and you can tell he takes much pride in it 👍🏼
I have a friend that is working on a 400ex can’t wait to see him rip it.
I’d love to see a can am ds 450 build!!
I got my stage 2 hot cam, new in box from someone for 75 bucks! He had it then decided to go stage 3, he had it for years never used. I love it in my 440ex, its a beast. Great vids 👌 👍 👏
I liked the attention to detail!!! Love it 🤙
Thank you bro! 🤘
like that you make this video, this gives a good idea of what to expect with cheaper parts and the total cost! Love every videos of that series can’t wait for the next one! Keep it up man🤟🏻🤟🏻
Thank you for the feedback Alex Massie, I appreciated you watching my video!
I bust tusk carriers once a year but I'm fluffy 😅
LOL!!!!!
There's no doubt you put your machines through the gauntlet Jacob 😂
Love the cost breakdown vids!
Thank you Shaun!
Great series bro. Keep it up!!
Thank you Jonathan Ashworth!
Just bought a 400ex so this is fantastic!
Excellent budget build keep up the hard work
Thank you bro! 🤘
Literally one of my favorite 4 Strokes that's my favorite color and everything love the yellow bug-eyed 400ex badass💪🤘💯
just got me a Presicion Stablizer, arrived yesterday. Cant wait to ride er with that on!
Game changing modification!
Good job hell of a deal on that build for sure
I appreciate it Dave!
That’s the best 400ex on the market right now!!
Love the videos man keep it up 👍
Amon Shrewsbury thank you for watching! 🤘
Great job on that video.
I love you vids man keep up the awesome work!!!!
The only part i didnt see listed was your brake caliper and caliper cooler? What brand is the cooler and does it help? Thanks and loving these 400ex videos i grew up on one had it bored 416 hot cams and pipe so its fun seeing you go further into the build!
Nice build!
Another good one Sabooooo!
🤘🤘🤘
What’s the best big bore kit for the Honda 400EX in your opinion?
@ 10:07 did you say this quad will be for sale?
Yes, it sold overnight!
@@MichaelSabo :(
@@Itsjake908 new projects are on the way man don't worry!
@@MichaelSabo alright brother we appreciate you 🤙🏼
I know blasters are over rated but I’d love to see a complete blaster build. Keep up the great videos!
I'd say they're under rated man; you can make them really fast!
Get a Can-Am ds450!! That would be a sick quad to do!
I've yet to work on one but I'd like to!
You need to do a blaster 200 build I don’t see many of those
A lot of people are asking for this!
Are you going to do a full build on it
No, it's already sold; onto the Predator! 🤘
I've always wanted to see a 400ex that's been kitted out with extras..
Awesome video
Thank you Kenneth Bushor!
Just goes to show you you can build a sweet quad for cheaper then you’d think I’d love to see a yfz 450 build
For sure man as long as you can do the work it can be done! YFZ would be sweet!
900 was a steal bud. Up here in northern NY 3000 will get you a 400ex that is completely clapped and would get smoked by a 50💯🤣
A 50!!! Damn man that's harsh! 😂
@@MichaelSabo hard reality of it. People beat the breaks off stuff then post it for more than they paid without putting a dime into it. Or screw you out of the paperwork so it's pretty much useless anyway
It's the same here in NC, gotta travel outta state to find a decent deal on one, saw one posted needing a cylinder and piston for over $3000
I’m surprised you didn’t put a 440 or 460 kit in it
The way this motor is setup it is probably faster than a good deal of 440s. It has to do with the flow capabilities and limitations of the head; I'm going to be messing with a 435 to see if I can get beyond the flow limitations.
Put the fcr on and do a comparison video with that and the stock carb ive heard they make a huge difference especially with big bore kits and cams
I love the shabang. U sell it???
Hey I have a 400ex that is due for a rebuild and was wondering if you have to special order the je piston for the 12:1 with the kit or does it come with it? Love the videos btw👍🏼
Where do you post your Quads for sale?
What's up Mike. Like the lighten fly wheel. It should increase the effect. You running stock gearing?
Will u sell it?
Sold overnight man!
I have a predator and i will love to see a cheap build of yours
First Predator video is this Thursday at 7 PM ET! 🤘
U should get a kawasaki lakota sport i have one and to see u have one and what u put on it would give me and idea
Also you should do a ltz400 build next
What did you sell it for ..?
Have you ever thought about building a ltz400?
I thought 400ex was going to the Mechanical Hulk?
Ur new friend giving u free stuff oh damn
You should get a different seat cover then it would look mint!
I actually kind of liked that seat cover lol
How much for your fcr carb?
Do they make a 416 or equivalent for a Kawasaki kfx 400
434 and 470 kits here - bit.ly/3vHmn0i
My promo code is "sabo10" for 10% off 🤘
Hi man I have a question I put a 416 kit in my 400ex and it’s always pings on a load and I run 93. And it seems like it’s getting worse what do you think is the problem
👏🏽👏🏽👏🏽🙏🏽🙏🏽💪🏾💪🏾
How much did it sell for?
3500
Thats a deal. I need to find one to hook up..
Hi Mike nice exhaust, great video . Second
Thank you as always John 🤘
I thought mechanical hulk was getting that quad.
He decided he wants the other 400 with suspension upgrades so I'll be building that one for him
Nice vid
Thank you as always Connor!
@@MichaelSabo your welcome
The yoshi header is way bigger tube then stock that’s crazy that the others arnt
I'd like to measure one; this FMF was the one I could get my hands on the quickest.
Yea I bought a brand new yoshi for my 400x and the tubes were way bigger on the header the factory looked tiny next too it and yoshi normally not one of the biggest exhausts if you know what I mean
Me and my dad going to do an esr 310 build on a 1986 trx250r
You should built the 400😉 full suspension and just make a keeper
I wish I could keep them all man, this was a great quad!
Let me know if you need any parts for the predy cause I litterly have a complete quad collection dust
I may possibly take you up on this! Thank you
Yo bud!
Yo 🤘
Suzuki Z400 BUILD PLEASE:)
Hulk isn’t buying it?
He decided he wants the other 400ex I have; I'll be doing a mini build video on it 🤘
What’s the price man
Sold for 3500 overnight
$900 for that is a unicorn
Agreed
Raptor 700r!!??
700 would be cool to do! We are doing a 660 in the next Quad Warz series 🤘
@@MichaelSabo nice bro keep the mud slinging and the dust flying!!! Can’t wait for the next quad warz!
TRAAAAAAAZ
So Matt never bought the quad eh?
Trx450r 2005???!!!!!!
Looks like the predator is a basket case
so yeah a Xring/Oring chains are for people like me who are lazy and dont oil often there chain...
cause i have non oring chains for dirt bikes and i do put some oil on them time to time but dont clean them ever..; tried to clean a Oring chaine once that is a pain in the ass... cause i sprayed it with OFFROAD water resistant Michelin oil.. that stuff sticked to every thing and all the dust god on it... and the hole chaine became BROWN from dust... so never using that again..
Stock trx450r is 33 hp...no way that turd is 40hp
This ones faster than you even on the most built 450 😊
@@MichaelSabo I live in Pennsylvania, not very far from you if you're west of philly...once this is done we can have a little race???
My favourite channel beside mine, listen Mike I message you on Facebook about my TRX it's an 88 I need help please brother I buy your merch HELP!!!
Just me, but "dude" is a tool shed.