ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 8 เม.ย. 2017
- How to clean a printer fuser roller. Cleaning procedures for upper fuser rollers, lower fuser rollers and fuser roller sleeves.
For any question or suggestion leave a comment
-----------------------------------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
www.linkaccesso...
email: link.accessori@libero.it
other links:
www.emmegiricam...
www.samsung.com...
store.hp.com/us...
www.brother-usa...
-------------------------------------------------------------------------
"If you don't have the grease, let the old grease." Words to live by.
Well you know, Grease is the word.... is the word. It's got groove.
Thanks for this video! I just needed to know if a damaged fuser roller can be fixed, but it's clear that is not possible.
Learned a lot anyway, so again, thank you!
Thank you! For non-nerd, non-mechanically focused scaredy cats, you relieved me of Gadget Anxiety.
1
Excellent, very helpful, thanks.
After change heater roller cover in hp 2727.there have two problems . 1st very slow printing. 2nd .in duplex .error mentioning paper path error.
Thanks you very nice video and helpful. One question is this a duplex fuser unit or not ? Looks like not duplex because it has only one heating roller if i am correct. It looks like mine and I would like to know if it can perform duplex printing or not .
May be I don't understand very well. There is only a fuser unit in the printer. there is no fuser unit in the duplex unit
@@viandant5 aa ok my bad I wasn't clear. I thought duplex laser printers should have two heating rollers (for both sides of paper ) so they need a special fuser unit . But now if I understand correctly duplex printers they just flip the paper in the duplex unit and print from the other side again .
@@user-sr3xg6wg5w yes exact
Hi, Hope all is well with you. I changed and replaced my printer hp laserjet 600 M603 fuser a couple months ago and it was working well until now and I got error 50.2f.00. I turned it off several times and also cleaned i9t up as you recommendation but still doesn't work. please advise me by return. Thank you
try to remove the fuser and rotate the gears by hand. Check if the thermistor is dirty
Can u tell me how to fix Damaged surface of lower roller.
What is the grease for? Is it to make the sleve able to move, or is it to better transfer the heat?
To better move the sleeve
@@viandant5 I had a problem with a brother DCP-8810, with about 90.000 prints. It produced long shadows, but the toner was burned stable on the paper. I have used a clear silicone grease made for cars, as exchange which should work from -30 to + 200°C. as result now the toner will not fixed correctly. But if i change the paper setting to "labels", it works, and i get a clear print without shadows, and the toner holds stable on the paper. so it looks like the fuser gets not hot enough now, with the new grease. always printing with the media setting "labels" is unfortunately no solution, because i also have to really print labels, which needs more heat again ... So may be, the grease have also the sense to transport the heat better!?
@@luxbox May be the silicone doesn't ermit the correct transfer of the heat to the sleeve surface. Silicone is a sealant
@@viandant5 thanks. Looks like i have to wait until i get the special grease made for brother printers...
@@luxbox Do not let the heater without grease. It could damage the fuser unit. Next time it's better to leave the old grease
sir do you know errors about the canon ir2200 printer
if yes I will ask another question
please sir..
Which error? an error code?
Heating roller issue in my printer Samsung ML2010,. paper prints clear on paper but center text rubs by finger easily. What to do its can be repair or have to change? What's expense?
may be the heater roller or the lamp, or even the toner cartridge. without watching the printer it's difficult to say
@@viandant5 r u from delhi?
no, I'm in Europe
Good job. THANKS!
Hp 2727 slow printing problem plz
Pleas help me ( I have a printer CS 8000i and error of C2300 what can I do to resit Send me some video about this error.
Upgrade the printer driver to the latest version. Check the fuser motor, Check the wire, if it's properly connected or is faulty. Replace the fuser unit
I have 110volt printerHP 3015 Printer giving 50.1error kindly give solution
It's a fuser error. what do you mean with 110V? A 110 V fuser in a 220V printer?
i have an issues with my HP color laserjet 2250L, the is always a blank spot on print outs with solidt background. when i removed the catridge, i found a black ink on the white roller, what can i use to clean this?
Are you sure the printer is HP color laserjet 2250L? I don't know this machine. Which is the HP code of the cartridge?
I meant to say HP color laserjet 2550L
You mean the white belt on the drum unit? you can clean it with isopropyl alcohol
i have used isopropyl alcohol to clean it thoroughy.. after my first print that came out well... subsequent print had a 1inch toner burn on the paper from top to bottom of paper.. and this renders the document bad. am afraid to clean again so that it doesnt affect the whole roller... or any video on how to clean all the rollers of the printinig machines including blades and all...?
The alcohol is ok, I've used it on tens of units but you have to wait until it's dry. If you are not familiar with this type of operation I suggest you to give the unit to some repair center. may be the waste toner hopper is full
I have a sticker traped in the printer and could not remove or print other documents. Please help me HP Colour LaserJet CP1515n
TO remove the fuser unit you have to remove the screws of the side panels of the printer, remove the side panels, detach the connectors of the fuser unit and remove the fuser unit. It's not easy if you have never done it
@@viandant5 Thanks for quick response. It seems somehow technical. I may have to take it to a technician.
Regards.
paper unable to pass through upper fuser roller and paper jam error is displayed in toshiba e-studio 2303a, give some solution
probably the fuser unit is worn or defective. there are not tricks, Check if there are piece of paper or other foreign objects in the paper path, if not I think you have to change fusers
viandant5 thanks
I have a Ricoh sp210su printer and it xerox half of paper and don't come out. How can I fix it? Please give me some clues
what is "xerox"? do you mean copy? Does it print normally from PC? which half of the page?
@@viandant5 Sir, I have ricoh printer which creates dots on the same distance, but, the drum is clean so what other issue can cause this problem? Would you please help me sir?
@@zaidacity2788 which is the distance?
@@viandant5Thank you for your response. Sir, it is 76mm
How to solve paper jam problem when fuser pressure roller is ok and teflon film is ok
a paper jam could be caused by foreign objects along the path of the sheet, ot check the picker fingers. are they out of position or dirty?
i have one question sir my printer kyocera 3920dn dirty printing can you help me please
without checking the printer it's difficult to say. It could be toner too old or damp, defective drum unit, defective fuser unit, dirty transfer roller, full waste toner box...
How to remove and clean printer fuser roller in Laser Jet Pro MPF M177w please
Because whenever im printing, it always crushes the paper.
sorry I've no video on this argoument. check the cartridges too
nice video
How can I clean a clogged ink jet laser head on my lexmark c734dn printer?
there is no ink jet laser head. it's a toner cartridge
what kind of a printer u having a problem with Viandant
they are different fusers. HP, Xerox and Oki
I used alcohol to clean silicon fuser roller but without interest
Madam 50 error problem HP m1213mf, please up loading solve process
it's related to the Fuser unit
meny meny thenks all of you
welcome do watch our this video hope this will help you for LJ 1020
i have hp m2727nf its giving fuser error 50.3 i restrart but not fix plzzz hekp me
look if the printer has proper ventilation. Make sure no books, folders, are leaning against the machine and not blocking the vents on the side of the machine. place the printer in a cooler ambient
you can watch video on our channel click here for LJ 1020 detailed th-cam.com/video/uz2qxIm1edY/w-d-xo.html
HP laser jet 2055dn fix fuser error slotion plez?
you only have to repair the fuser unit.
thnx but agen fuser error
HP (403d) cnf228A LaserJet toner cartridge video please
Cf226a? there is a video in this channel
HP M477 PCL6 Printer leaving spots on my paper when printing. How do I fix it
always at the same distance? if not, may be the recovery blade of the cartridge is defective, or the transfer roller is dirty
@@viandant5 same problem how clean?
@@secundariajosemarti42nauca55 which printer? always at the same distance? if not, may be the recovery blade of the cartridge is defective, or the transfer roller is dirty
@@viandant5 same distance left side big spots all color (cartridge NO Hp)
@@viandant5 hp m477
Isopropyl Alcohol and Rubbing Alcohol are the same thing
Isopropyl Alcohol has no addictives
You skipped too many steps. How to disassemble the fuser.
This video is about the cleaning not the disassembling
After change heater roller cover in hp 2727.there have two problems . 1st very slow printing. 2nd .in duplex .error mentioning paper path error.
What is the heater roller cover? The fuser sleeve?
Sir plz reply me . Of 1 & 2 problem
Sir plz reply me . Of 1 & 2 problem
@@manzoorulhaq4147 What is the heater roller cover?
@@viandant5 after fuser sleeve and red ruler changed they show the duplex error . Paper squeeze and slow printing problems