Always hard to tell through tinny speakers but to me the one that came with the bike sounds best at revs but the Yoshi looks the part and will last longer of course. Nice clip.
I had muffler work done on an old car, and they just welded it in place, I think. Seeing a replacement muffler put on properly is pretty neat. I did not expect it to be around 500$ for the part.
I didn't notice any change....and the sounds isn't even that different from the no-name after market slipont....I guess the biggest difference is that it looks better 😂
Hey I had a question about a 2015 honda cbr I checked spark fuel and compression can there be a problem with a sensor that it wouldn't let it start cranks but no start ? Thanks for your time
That's a tough question. I guess i would start by trying to understand the operating condition immediately prior to the failure, as that might help indicate what exactly when wrong. Next, i'd interrogate your spark/fuel/compression tests, since having those 3 things working generally means the engine SHOULD start. Like...did you directly observe the spark plug sparking or just that the ignition coil is powered? And did you confirm that fuel is squirting out of the injector, or just that the fuel pump is pressurizing? etc etc. Also wouldnt hurt to double check all your fuses. Outside of that, i'd probably try to check on stuff that would significantly throw off your air-fuel ratio (e.g. is the air filter completely clogged from a mouse that made your air intake his ancestral home over the winter? Does the throttle plate move when you twist the throttle? Has someone done a shade-tree-"tuneup" and flashed your ECU to something that is actually stopping the engine from working? If you check through all that stuff, and still come up short, i'd recommend you put a question up over on www.cbr300forum.com/ Those guys are super knowledgeable and helpful. Good luck, and let me know how things shake out!!!
![ตัวอย่างภาพยนตร์ #Venom: The Last Dance [Official - Sub Thai]](http://i.ytimg.com/vi/DHPjvAwmnRE/mqdefault.jpg)
Always hard to tell through tinny speakers but to me the one that came with the bike sounds best at revs but the Yoshi looks the part and will last longer of course. Nice clip.
I had muffler work done on an old car, and they just welded it in place, I think. Seeing a replacement muffler put on properly is pretty neat. I did not expect it to be around 500$ for the part.
Love the sound of the yoshi, and the look is a huge improvement as well!
with the upgrades do you notice a change in your top end speed or acceleration? if so by how much would you say?
I didn't notice any change....and the sounds isn't even that different from the no-name after market slipont....I guess the biggest difference is that it looks better 😂
Hey I had a question about a 2015 honda cbr I checked spark fuel and compression can there be a problem with a sensor that it wouldn't let it start cranks but no start ? Thanks for your time
That's a tough question. I guess i would start by trying to understand the operating condition immediately prior to the failure, as that might help indicate what exactly when wrong.
Next, i'd interrogate your spark/fuel/compression tests, since having those 3 things working generally means the engine SHOULD start. Like...did you directly observe the spark plug sparking or just that the ignition coil is powered? And did you confirm that fuel is squirting out of the injector, or just that the fuel pump is pressurizing? etc etc. Also wouldnt hurt to double check all your fuses.
Outside of that, i'd probably try to check on stuff that would significantly throw off your air-fuel ratio (e.g. is the air filter completely clogged from a mouse that made your air intake his ancestral home over the winter? Does the throttle plate move when you twist the throttle? Has someone done a shade-tree-"tuneup" and flashed your ECU to something that is actually stopping the engine from working?
If you check through all that stuff, and still come up short, i'd recommend you put a question up over on www.cbr300forum.com/
Those guys are super knowledgeable and helpful.
Good luck, and let me know how things shake out!!!
@lightningfrog27 thankyou so much for the response I will check these things and see if I can get it started once again thankyou for your time 👍
Do you know the size of the mid link pipe?
So...I actually recently sold my 300, which means I can't directly measure it....but from some googling, it appears to be 51mm
Hope that helps!
can someone send this exhaust to india ❤
i bet some reseller would....not sure what shipping to india is though!
Old sounded better to me
facts