creating various types of geodesic domes, with no plugins, in Sketchup

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 พ.ย. 2024

ความคิดเห็น • 42

  • @cschill0
    @cschill0 11 หลายเดือนก่อน +5

    Thank you for the video, it is an awesome walkthrough and I learned a lot about sketchup!
    Small but important thing to note using this method: Using the divide by function to copy the radial lines means the distance between the points on the surface of the sphere is equal, not the distance between the points on the icosahedron edge (the edge of the triangle). Although this will generate a geodesic dome, the geometry is slightly different from dome calculators like domerama. I wasn't quite sure how to use the divide or multiply copy functionality to split the icosahedron edges, so I just divided the edges into five parts and copied the radial length each time to the endpoint of the divided icosahedron edge. It was a bit more work, but resulted in the same geometry as domerama.

  • @tonyhawk123
    @tonyhawk123 2 ปีที่แล้ว +9

    Thanks for an interesting video. I think there's an easier way to do this though. The most complicated part in the video by far is projecting the points (vertices) from the divided triangle onto the surface of the sphere. So another way to do this part would be as follows.
    Divide a triangle into smaller triangles (as shown in the video), then for each new point just draw a line from the sphere's centre to that point, then type in the radius length! The point should now be on the sphere's surface.
    Then repeat this for the other points, and once all the points are on the surface of the sphere just connect them with lines.

    • @30isurfer
      @30isurfer ปีที่แล้ว

      Thanks a million Tony!
      Very informative and detailed for dummy beginners like me.

    • @mil-fpv4931
      @mil-fpv4931 ปีที่แล้ว

      Yes, this is must easier way, at least for me.

    • @michaelcus734
      @michaelcus734 หลายเดือนก่อน

      Wouldn't that increase the margin of error? Given that the radius's length would be an approximation. Unless if you select dimensions such that the radius length is a rational number.

  • @SmeeUncleJoe
    @SmeeUncleJoe ปีที่แล้ว +1

    That's great for drawing them. Would you know if it could be upgraded to calculate member lengths and angles ?

  • @dawidchabior9777
    @dawidchabior9777 6 หลายเดือนก่อน +1

    Another way to achieve this is exporting ICOSphere from blender to collada format. Saves a lots of time.

  • @islamicartist7681
    @islamicartist7681 2 ปีที่แล้ว +1

    Very informative and interesting. Thank you. Keep uploading these kind of videos 👏👏👏

  • @Acheiropoietos
    @Acheiropoietos 11 หลายเดือนก่อน

    Very comprehensive insights. Thank you.

  • @cks2178
    @cks2178 ปีที่แล้ว

    Thank you man this video was very much helpful for me for my dome project.

  • @cristhoferandrade3516
    @cristhoferandrade3516 2 ปีที่แล้ว +3

    man!!! you are insane!!! thanks for sharing!!

  • @madwani
    @madwani 2 ปีที่แล้ว +2

    Not impossible but very difficult to follow. I got the main idea how to do it, but it needs deep concentration.... Thanks a lot.

  • @coderrza117
    @coderrza117 2 ปีที่แล้ว

    I hope you will continue to train creative architecture , on mega ubran projects , practical application step by step👍✔ And upload all what need tuto

  • @coderrza117
    @coderrza117 2 ปีที่แล้ว

    I hope you will continue to train creative architecture, practical application step by step👍✔ And upload all what need tutorials ✔💙 #for_support_u

  • @Andrew-nj9ek
    @Andrew-nj9ek 29 วันที่ผ่านมา

    When draw the golden triangle, no need to put measurement?

  • @alijalili2772
    @alijalili2772 27 วันที่ผ่านมา

    How to rotate in dark,my rotation is always blue red and yellow!

  • @LBGTR1
    @LBGTR1 ปีที่แล้ว

    At last understandable instructions, many thanks!

  • @leszekkubiak9584
    @leszekkubiak9584 8 หลายเดือนก่อน

    good work

  • @sking7219
    @sking7219 11 หลายเดือนก่อน

    Initially when creating the first geodesic sphere shape, he creates the first two triangles and then presses x4 to create the rest on that side. When I do this it doesn't work, do I need to press something else at the same time?

  • @eshosora9339
    @eshosora9339 ปีที่แล้ว +1

    Easier and faster way is with using mirror insted of (copy+ rotate) in all the oprrations...thanks alot.

  • @amiralipirzadeh9556
    @amiralipirzadeh9556 ปีที่แล้ว +1

    31:23 Instead of ctrl C then delete you can also use ctrl X(cut)

  • @rraffaell73
    @rraffaell73 ปีที่แล้ว

    What a class! Thank you!

  • @mikemunro7223
    @mikemunro7223 ปีที่แล้ว

    that's some great info, thnx

  • @GooGoosDad
    @GooGoosDad 2 ปีที่แล้ว

    Very, very good!

  • @jimligon1460
    @jimligon1460 2 ปีที่แล้ว

    thanks... very good..... for a lay person, hard to follow, but I will get it.

  • @martinacurto4459
    @martinacurto4459 2 ปีที่แล้ว

    Can i do this with heither pentagon or hexagone?

  • @murtadhaarchitect322
    @murtadhaarchitect322 2 ปีที่แล้ว

    Make course modeling + architecture presentation for support ❤️

  • @cryptocite3366
    @cryptocite3366 2 ปีที่แล้ว

    thank you Ali.

  • @leventyukselen9063
    @leventyukselen9063 ปีที่แล้ว

    Thank you, like you, thanks

  • @waseem1183
    @waseem1183 2 ปีที่แล้ว

    Thank you so much

  • @myalmamyalma1314
    @myalmamyalma1314 ปีที่แล้ว

    0:39 size ????

  • @myalmamyalma1314
    @myalmamyalma1314 ปีที่แล้ว

    Ctrl alt v ??

  • @rodrigodoug5530
    @rodrigodoug5530 7 หลายเดือนก่อน

    Genial

  • @brigittevanholder2364
    @brigittevanholder2364 9 หลายเดือนก่อน +1

    why make it simple when it can be more complicated

  • @fandiiab4491
    @fandiiab4491 ปีที่แล้ว

    th-cam.com/video/Mve-P4hlkjI/w-d-xo.html this video has the shortest way to create icosahedron, but his method to create 6v with plugin not quite accurate because it doesn't have equal radius on each vertice, yours is accurate..thanks

  • @욜-b5s
    @욜-b5s 8 วันที่ผ่านมา

    25:27

    • @욜-b5s
      @욜-b5s 8 วันที่ผ่านมา

      33:14

  • @hanily860
    @hanily860 2 ปีที่แล้ว

    MY BRAIN BLOWN ..😓

  • @zorbeygucluismailgucluogul9470
    @zorbeygucluismailgucluogul9470 ปีที่แล้ว

    abonelik paralımı

  • @shjvonwong
    @shjvonwong 28 วันที่ผ่านมา

    actually this video is useless for me. use hot key for entire video. i dont even know what to do

  • @thalescatao
    @thalescatao ปีที่แล้ว

    that is not a geodesic dome. The sides dont follow the common pattern of segment lenghts

    • @AGRarch
      @AGRarch  ปีที่แล้ว +2

      en.m.wikipedia.org/wiki/Geodesic_polyhedron