HOW-TO build a COFFIN SHELF! DIY step by step tutorial!

In this video we go over each step we did to build the coffin shelf! This Build is 100% made out of cedar fence wood. Check out our mathematics part to this build! • DIY COFFIN SHELF build...
The materials and tools we used were:
1X6X6 Cedar Fence pickets
Wood Glue
1 1/4" Angled Finish Nails
2" screws
Black Glossy paint
12" Compound Miter Saw
Table saw
Skill saw
Square
Track for guide cuts
clamps
16 Gauge Angled Finish Nail Gun
Mallet
Tape Measure
Pencil
Drill
Counter Sink Bit
___________
Board Cuts:
1-1"X6"X16"
2- 1"X6"X13 7/16"
1- 1"X6"X22 1/2"
2- 1"X6"X53 3/16"
1- 1"X6"X14"
1- 1"X6"X20"
1- 1"X6"X17 1/2"
1- 1"X6"X15"
2- 1"X5 1/2"X20"
1- 1"X1"X20"
2- 1"X5" X18"
2- 1"X4"X16"
___________
This makes great Halloween decor and even better furniture. If you have any questions leave them down in the comments and we will answer the best we can.
Remember to always wear proper safety gear and watch and prevent incidents that may occur.

[@zissu1]

Thank you. Best video on TH-cam for the coffin shelf. Thanks for all the cuts and angles

[@triplegcustoms]

Thank you !

[@onefeather2]

Thank you for telling all the degrees of angles. Well done.❤️💀

[@triplegcustoms]

Your welcome ! Glad we could help ☺️

[@georgerodriguez8680]

Nice 👍🏽 job

[@DaMikeHoward]

Cool video! I will be attempting this pretty soon!

[@dadams8281]

On the first cut, are you cutting the edge and THEN measure at 16 inches? Or start off with a 16 inch board and then cut both angles?

[@triplegcustoms]

I cut the board first at a 38 degree angle then measure out 16 inches and make another 38 degree cut. It’s easier for me to cut the angle first then measure it.

[@triplegcustoms]

But in the end it will be total length 16” with 38 degree angles on both sides

[@chesterreynoso5373]

Awesome video man. I had a question can I use the same angles for a 3ft coffin ? Thanks

[@jasminerodgers9553]

I'm making this asap I need 2

[@triplegcustoms]

Good luck! We hope you love the way it comes out!

[@lorylopez9864]

Hi I'm a little confused. Can you tell me just the angles for each cut with out the tutorial? I would really appreciate it. Thank you

[@jazminbenavides1767]

hello, i was wondering how did you get the angle cuts? i have the same miter saw. but can’t figure out those angles your using

[@triplegcustoms]

I have a video called: DIY coffin shelf build how-to dimensions and angles break down, I go over the math and everything on how to get the angles how to cut it and even how to set up the saw. Watch it and if you have any more questions just let me know and I’ll see what I can do to answer them

[@melanipetty1910]

If I were to make a hanging shelf for the wall and scale it down would the angle measurements stay at the same degree or would those have to be changed? I don't math well lol. Fantastic instructions and it looks great.

[@zissu1]

Same. I made a small one to practice the cuts and it worked.