I really appreciated that you showed the first attempt! I just started getting into woodworking and often get discouraged when my projects don't end up how I hoped they would. Mistakes are bound to happen, and it was very encouraging to see you learn from the first attempt and make the needed adjustments. Great video!
Hey Rick! Great project! I have been making flutes and some ocarinas for years. One thing to note (!) is that even with PVC I almost never get exact sizes from the drill. So, the best thing to do is drill a little bit small and work your way up slowly with a file or narrow knife/scraper. I like your method of drilling out the hole pad with a taper for the small holes, but keep in mind that doing that lets the air flow more easily and sharpens the pitch. I recommend making the taper first, then drilling a way-too-small hole then sneaking up on the pitch. I love your channel!
Thanks for your input Charlie! I plan to keep experimenting with this and try my hand at making some other types of instruments in the future. I appreciate your insights.
Thank you so much for making this video! I am in a long time musician which is my first love but a very close second love is wood turning and all I have ever wanted to do was invent instruments using the would lathe. This video has definitely Giving me some ideas so thank you very much again.
I just had a crazy thought.. How about making the holes using the old Yankee hand drills?? I've got a bad habit of buying them whenever I see them at yard sales and believe me, everyone wants to just sell them off for next to nothing. One of the best scores I made on Yankee hand drills was a fishing tackle box that was FULL of Yankee bits. I mean for the small ones to the large ones, drill bits, flat head screwdrivers, phillips drivers, the works. I'd bet there are around 70 bits just in that box alone. Here's a tip, if you ever see one for sale at a yard sale. pick it up and shake it. If it makes a rattling sound, that means there are bits in the handle.. Unscrew the knurled nut just below the handle, and the cover will slide down and there will be your prize, right inside the handle.. I've been amazed at watching people selling those things at yard sales, they watch me shake it and I usually don't open it if I hear the tell-tale rattle but, every now and then someone will ask "Why did you shake it??" and I tell them "To see if there are any bits inside the handle.." Then I unscrew the knurled nut and count the bits that are in there.. I give them a few bucks at most for it and walk away, checking back over my shoulder to see if they're still standing there with thier mouths open in amazement or not. I often wonder how long they had those things and never looked into finding what was making the rattling sound..
Hi Rick, very nice video and what a nice sound, it reminds me of a North American flute or pan pipe. Do you think it might be easier to drill out the bore with the help of a chuck fitted into your tail stock? That way you would be able to drill horizontally and not have to block up the drill stand. Just as a bit of feedback, do you think that if you kept the bottom section straight with a removable plug so as to be able to add an extension. Just a thought. Bob UK..
I carve as a hobby by hand, the only power tools I use is hand drill and pyro pen Its shame in the UK I can't get my hands on one of those to see if its possible to do with hand tools
I have made a few wood ocarinas a few turned out out ok others not when it comes to ocarinas lots of tweeking is involved so i think clay is a much better medium Loads easier to tweek
I have one wooden 4 holes ocarina. The last two high notes, B and C, do not sound. The others sounds fine. I don't undestand why this hapens. Somebody can help me?
its most likely the fipple size or angle Wood ocarinas are a challenge I think when it comes to ocarinas Clay is a better medium easier to tweek and make small changes and ocarinas always seek to need tweeks here and there
I really appreciated that you showed the first attempt! I just started getting into woodworking and often get discouraged when my projects don't end up how I hoped they would. Mistakes are bound to happen, and it was very encouraging to see you learn from the first attempt and make the needed adjustments. Great video!
Hey Rick! Great project! I have been making flutes and some ocarinas for years. One thing to note (!) is that even with PVC I almost never get exact sizes from the drill. So, the best thing to do is drill a little bit small and work your way up slowly with a file or narrow knife/scraper. I like your method of drilling out the hole pad with a taper for the small holes, but keep in mind that doing that lets the air flow more easily and sharpens the pitch. I recommend making the taper first, then drilling a way-too-small hole then sneaking up on the pitch. I love your channel!
Thanks for your input Charlie! I plan to keep experimenting with this and try my hand at making some other types of instruments in the future. I appreciate your insights.
I like your "Lord of the Rings" flute tune! Nice work on your ocarinas.
Thank you so much for making this video! I am in a long time musician which is my first love but a very close second love is wood turning and all I have ever wanted to do was invent instruments using the would lathe. This video has definitely Giving me some ideas so thank you very much again.
I just had a crazy thought.. How about making the holes using the old Yankee hand drills?? I've got a bad habit of buying them whenever I see them at yard sales and believe me, everyone wants to just sell them off for next to nothing. One of the best scores I made on Yankee hand drills was a fishing tackle box that was FULL of Yankee bits. I mean for the small ones to the large ones, drill bits, flat head screwdrivers, phillips drivers, the works. I'd bet there are around 70 bits just in that box alone.
Here's a tip, if you ever see one for sale at a yard sale. pick it up and shake it. If it makes a rattling sound, that means there are bits in the handle.. Unscrew the knurled nut just below the handle, and the cover will slide down and there will be your prize, right inside the handle..
I've been amazed at watching people selling those things at yard sales, they watch me shake it and I usually don't open it if I hear the tell-tale rattle but, every now and then someone will ask "Why did you shake it??" and I tell them "To see if there are any bits inside the handle.." Then I unscrew the knurled nut and count the bits that are in there..
I give them a few bucks at most for it and walk away, checking back over my shoulder to see if they're still standing there with thier mouths open in amazement or not.
I often wonder how long they had those things and never looked into finding what was making the rattling sound..
Thank you very much for sharing the experience and your time, we will put it into practice, Greetings from Argentina
Awesome! Lovely work and great music❤
You can drill the hole on the lathe with a Jacob’s chuck on your tail stock
sounds damn good
Nice little project. I'm going to have to try that myself.
@Quazmodic :D
@@mfcpwoodworking2269 you mom
Did you ever do more with this idea?
Hi Rick, very nice video and what a nice sound, it reminds me of a North American flute or pan pipe. Do you think it might be easier to drill out the bore with the help of a chuck fitted into your tail stock? That way you would be able to drill horizontally and not have to block up the drill stand. Just as a bit of feedback, do you think that if you kept the bottom section straight with a removable plug so as to be able to add an extension. Just a thought. Bob UK..
very nice work
I carve as a hobby by hand, the only power tools I use is hand drill and pyro pen Its shame in the UK I can't get my hands on one of those to see if its possible to do with hand tools
Put the holes on the opposite side or make it longer. The air going across the fipple is going into the tone holes and killing the sound.
That's pretty good! 👍
Thanks! 😄
Nice job.
I have made a few wood ocarinas a few turned out out ok others not when it comes to ocarinas lots of tweeking is involved so i think clay is a much better medium Loads easier to tweek
Thanks for sharing that
I have one wooden 4 holes ocarina. The last two high notes, B and C, do not sound. The others sounds fine. I don't undestand why this hapens. Somebody can help me?
its most likely the fipple size or angle Wood ocarinas are a challenge I think when it comes to ocarinas Clay is a better medium easier to tweek and make small changes and ocarinas always seek to need tweeks here and there
What if you only have hand tool s
Might have to use pre cut things, or just take a lot of time(with things like lathe)
😊😅когда кончатся эти бормотания на не пон😊я😊тном языке? Безобразие!