Hi f&f, I'm trying to remove my tilt mechanism. I'm doing exactly the same as you, but the part that you removed with the screwdriver and popped up. Mine won't budge it will turn buy tapping with a mallet, but it won't come out. Mine is the 1986 volvo aq131a 275 out drive. It looks the same as your mechanism. Any advice would be very appreciated as I can't find any help online or the service manual. Again thank you for your videos they are very helpful. Also thank you again for the flapper, it's still in great working condition. "GOD BLESS YOU AND YOURS"
Quick question if you see this: was there anything on the pressure plate that you had to remove prior to removing the lift mechanism? There seems to be a hex head on mine that needs to be removed off the old one in order for it to be lifted out. Thanks!
@@baymaxhero4127 I went ahead and got it done since I hadn't heard back. Nothing had to be removed from the end of the piston/pressure plate. Once you have the trim motor bolts out, you can pull the entire assembly right out from the engine compartment!
@James jr Plumb Master i have been looking and only found some over $800 bucks i mean i would not mind if thats the last option but is their a link you have ?
Hi f&f, I'm trying to remove my tilt mechanism. I'm doing exactly the same as you, but the part that you removed with the screwdriver and popped up. Mine won't budge it will turn buy tapping with a mallet, but it won't come out. Mine is the 1986 volvo aq131a 275 out drive. It looks the same as your mechanism. Any advice would be very appreciated as I can't find any help online or the service manual. Again thank you for your videos they are very helpful. Also thank you again for the flapper, it's still in great working condition. "GOD BLESS YOU AND YOURS"
Thanks for sharing. Need to do the exact same replacement on mine this week.
Again. Amazing. TTHANK YOU.
Thanks!
How hard was it to find parts for your boat
I was lucky to find them on eBay.
Can you show how the lift mechanism works? I have the exact same system but my outdrive tilts up and down freely by hand with no resistance.
Quick question if you see this: was there anything on the pressure plate that you had to remove prior to removing the lift mechanism? There seems to be a hex head on mine that needs to be removed off the old one in order for it to be lifted out. Thanks!
I need to as well. I’m not sure. Is there a way can post a picture In here?
@@baymaxhero4127 I went ahead and got it done since I hadn't heard back. Nothing had to be removed from the end of the piston/pressure plate. Once you have the trim motor bolts out, you can pull the entire assembly right out from the engine compartment!
where can i fined a used one
I used to see one on eBay.
Hello my tilt mechanism wont go up or down is the exact same one as this one you are installing, any sites or idea where i can get one of this ?
@James jr Plumb Master i have been looking and only found some over $800 bucks i mean i would not mind if thats the last option but is their a link you have ?