How To Get 3rd Party Cables(Ebay/Amazon) To Work With Vagcom/VCDS Lite
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- In this video I show you how to get the Ebay/Amazon, or any other 3rd party cable to work with VCDS Lite. This cable will only work with VCDS Lite and you will therefore have limited options and functions.
Driver for cable: www.totalcardiagnostics.com/su...
VCDS Lite: www.ross-tech.com/vcds-lite/do...
Disclaimer:
I am not a professional mechanic and can not be held responsible. - ยานยนต์และพาหนะ
The only video from the last 10 that did worked, thumbs up!
Yet another thank you. My problem was in two parts. 1, the VAGcom came with a disk which I couldn't get to work (load the driver) so as you suggested I downloaded from the ross-tech site - which worked fine. 2, You showed how to change the COM port, mine was reading 7 - so I changed it to 2. Then it all worked fine.
Sou aqui do Brasil , eu li o seu comentário e tive o mesmo Problema , mas resolvi vendo este Vídeo ..
did you have to pay for a serial key to use the program?
Thanks mate! Got it working. I successfully tested the interface in VCDS Lite only after connecting it to the OBD II port and starting the engine.
But can you make modifications?
@@Passion4everCRazy It only works for erasing fault codes and reading diffrent values from your car's sensors.
@@sergiutamas1896 can you use the measuring blocks function?
Muchas gravias por la informacion excelente video god bkess you bro
Worked perfectly with my $20 Amazon VAG KKL adapter in a 2009 Audi A4 Cabriolet 8HE. Didn't need to use the convoluted drivers that where on the CD it came with. Successfully managed to recode my Symphony II+ radio with it to enable Aux input.
do you have windows 10 ?
@@theforestlizard223 yes and it worked fine
@@justinwiden can you send me the drivers in a email , i cant get this to work and i dont have the cd
@@theforestlizard223 you don't need the CD, I only used the drivers he provided in the video and it worked.
@@justinwiden maybe my cable is bad or something because my pc cand se this as a port
Thanks man! This helped a lot!
Thank you very much.
Would love to see more videos
Thanks a lot, I have my ebay cable setup correctly with my 2003 Jetta Diesel. When I open VCDS-Lite, I click on "Select" in Control Module, then click on "01-Engine", it tries to communicate and fails after a few seconds and shows an error "too many errors...". Any idea how to fix that? Thanks.
hello, i just installed a rear camera on vw amarok 2014, i have to buy a cable to activate it, could you give me an amazon or ebay link able to do this please?
Do you think vagcom lite could show the real km of the car?
Thank Bro ! a great video !
Hello I have it working but do I need to buy the program and where to be full version so I can save codes...
Since it's a VCDS Lite : is it possible to activate options like corner lights or not please?
Hey. What to do if the cable is not showing at com port? I can only see it at Universal serial bus connectors. How do i add it to com ports?
Will this cable work with golf mk6 tsi ? 2012
I’m trying to get one to turn off Day Running Lights and turn off the driver’s seatbelt light which constantly comes on bc of a malfunctioning sensor. Can I access those parameters with this?
Mine does see it as usb not as a com port. What to do?
Would I be able to use this tool to power my dashcam
Can this cable work with the full version software?
@Aba Garage Could you give me hand with somes problems im facing?
Which version of VCDS Lite did you use?
i install correct way but still doest recognize the usb. what to do mate?
Hey,a bit of help here. This is where am stuck.... Port Does Not Exist, Interface Not found. I've tried switching between COM1 and COM2 since COM3 and COM4 are in use , but outcome is the same when I press Test!
Hei! Jeg ser du har samme utstyrspakke som meg på Audien din. Jeg er litt irritert over at den ikke viser forbruk (L/100km). I de andre utstyrspakkene så ligger dette på både rattet og på en knapp på vindusviskerkontrollen. Men spørsmålet blir altså om det er mulig å låse opp forbruket som en feature ved bruk av VCDS Lite for å få det opp på førerdisplayet?
Hi there it's there any chance to download it differently because isn't working for me? Thanks
My device manager doesn't recognize the port at all even after installing the driver. WIN 10 + blue KKL cable. What should I do?
DOES THIS WORK FOR 2009 AUDI A5, please help. Thanks
Hello ! I tried with vcds and with vcds lite and its not working with the ports
Can I use this Ebay cable with nu Polo gt tsi 2022 Model?
Hi sir your cable is which chip use can you say me pls ftdi or ch340 ? Because we are com port name is nothing ch340 this writing is usb serial port ı want to coding and my on vcds program is not write the coding writen is recode for coding which chip to prefer can you help me thnx
Thanks so much it worked
which cable do you recommend? can you please share a link to it?
After i plug in my cable and I go to device manager, My Cable still just reads as "USB Serial" In other devices. So I'm guessing this didn't work
I can Not install the driver for the cable.. it says installed but then Windows says its not right installed
Is there any way to make it work on Windows 11?
With VAG COM lite can I activate basic things to a 2009 Audi a4 prestige, such as open/close windows with unlock and lock buttons on key, concerning fog lights, Enable Ambient Interior Lighting Control, needle sweep, adjust LED brightness.
crazy my 03 passat came standard w that. 2013 had to play vw tech for a day to get it back lol
Anyone know if VCDS lite will work on a 2005 VW Polo MK4 9n?
Does this work for skoda superbb 2017
hi ma
epay version do i need to register it
and what the limitation
I have the same cable, didn't you insert the disc into the computer to download the software??
Hi i have PROBLEM not work CAN, i don’t no but ENGINE work the led is green, cable is HEX+CAN Ross-Tech, can not get in (Central.Elect.09) but in (Central Conv.46) yes can. I installed the driver, all working the only thing,
I can not get in Central Elect.
Someone has resolved this problem ?
My car is Passat b5 2003...
Can someone help me ? Thank!!!!
Hvor holder du til
Does it work with Windows8 b4 bit?
It’s detecting but I got the problem when we try to open anything in Control Module it’s getting “No response from the controller” Please help to fix this
i have a 2015 jetta with this same setup but it doesn’t work. anyone have any tips to help me please and thank you!
good man great help
VCDS Lite only works with 2005 and older cars according to Ross-Tech.. is that true? (I wanted to use it to change some of my settings on my 2012 VW T5) ?
this is true. Worked 100% on my 2004 MK4 GLS, but did not work on my 2012 Golf R
There's a good chance that VCDS-Lite will not work on any VAG vehicle post 2004. (I don't think that VCDS-Lite software has been updated since the early 2000s.) VCDS-Lite uses what is known as a dumb cable. The full paid version required a special cable incorporating a dongle to stop piracy. That dongle not only ensured that the the copy of VCDS was legitimate by checking the license when it went on-line but if not it corrupted the cable. Hence saying that you should turn off all network connectivity when it is connected. The latest version of VCDS appears to use Bluetooth to connect from your laptop to the OBDII connector doing away with cables completely.
VCDS Lite was last updated to ver 1.2 in 2012
Æ har Vag kkl 409.1 kabel fra aliexpress, men finn ikke den gamle vag com 409. kun vcds. har du brukt den gamle 409?
thank you for the video
Where's the link to this site
Have Touran 2004 there is no in this list. What do I do when I have a problem with the steering wheel?
you need vcds 10.6 and higher version with can bus communication. version in this video is for vehicles without can bus.
Will the VCDS program clear the transmission memory? I installed a new valve body in a 2005 VW Beetle 1.8L T 6 speed auto and I need to re learn the transmission.
Did it work
Thanks Brother!
im having issues getting the driver to work, any help would be greatly appreciated
Hi, i had the same problem. I download the driver from link in description, then i run Driverhub. Drivierhub find this driver and we just need cilck "instal". Computer must run again and now, in device manager the cabel is reading properly. Try this, maybe it would help to you.
can i use this method to adjust my start/stop VW to accept a more powerful starter battery?
After installing the drivers and doing everything l can't find the cable in the device manager. Or rather is does not show as port but under other units then USB2.0-serial. what does that mean? Can't update drivers manually by choosing the folder, please help
I have the same problem, I think it's because you might have Windows 11
Can you read the real km in this vagcom lite?
No
Good video, the links still work...
thanks thanks thanks very good video
you should put a link to buy the vcds lite licence, i bought it after watching this. $99 0r £78 in my case best buy ever. i had to bleed abs pump on my mk4 golf. now i can put my windows up and down with my key fob.
does it works with other cars ???
send me the link for the cabe
I just subscribed thanks
Is it considered as a third party cable so it have less functions or it's spoofed as an official cable to do the same things as the real one ?
Any luck finding the information you asked for here ?
@@kruskotv1311 There is big business behind car repairing, people don't want to tell about what they know. It's nearly impossible if you don't have good contacts by any luck. Opaque domain
Site mentioned for drivers download does not open. Any alternative?
Use a VPN. worked for me
Can you code with VCDS Lite?
Can you use it with the full version?
No, you´ll get an interface error.
Thanks!
Mine says interface not found?
is there a way to get this to work with vcds? (not vcds-lite)
Piano Tutorials no
Can i use this cable to flash ecu as well?
Any update?
In for info
Does VCDS Lite work with 2006 Audi A3? Looks like you have an Audi of about that year in the video. I was told my A3 was too new to work with VCDS Lite and the KKL cable
Did you ever find this out as ive got a 2006 a3 and wanted to try the vcd lite
@@danieldavis4334 it won't work. The '06 A3 is based on the Mk V VW Golf/GTI platform and electronics. The VCDS Lite app only works up to Mk IV. I had to buy the $200+ software and cable from Ross Tech.
good video.thanks
It says no response from controller I need help thanke
the Ross-tech download page clearly states that VCDS-Lite 1.2 is for cars older than 2005. What do I do if my car is younger?
Wait for it to get older
@@sebastianwoloch2236 LMAO.. Good answer... Andrews can pay ross for the real VCDS or try the A30m.
Hi, can i use this for audi a6 c6 2008?thanks
i just can't download the driver sadly
Hello, does this cable also work with Vag Tacho software?
yes
@@jeffatmama6701 where can you get the Vag Tacho Software that will work with this cable?
I have the same cable from amazon with a disc, you don't have a disc, I can only use a cable and I have access to vcds fuul diagnosis
I did everything and it still won't work for me
Did you pay for the full version does it work on Windows 10??
Can I use this cable for vw golf mk6 gti?cause I need vag com
no
Mine is stuck on com 6 and i cant re write it
If you don't know how to change com port settings, just install the software into another laptop - you'll be unlikely to find two configuring it as COM6.
Alternatively, go into your computer bios (at startup) and disable all COM ports. Then uninstall both driver and software, before restarting and re-installing. That'll do it. You can always re-enable the BIOS COM ports afterwards, if you really do need serial comms for anything?
Thanks 👍
I’ve got an mk6 golf and I keep getting an error “no response from controller”
2004 mk4's are the newest ones you can use these things on.
Did you find one for your MK6?
Jack Clancy did you fix your error? I just made the same mistake with my MK6 and now my car won’t start.
Will this cable work on 08audi a5 3.2 quattro
i keep getting "no response from controller"
the test is success though
Asif Kruz did you fix it?
Asif Kruz those cables only work on older cars.. you need a can cable for newer vehicles
have you got the cable in to the car? i got this error until testing whilst connected to the car. check device manager / ports / look what number port it is 1,2,3,4, etc, then make sure you test with the correct port selected. I have a £5 ebay cable and a licenced VCDS lite, i can do everything i need with that
can I use that cheap cable for my 2016 US Spec Jetta ?
no...u need (not "KKL" u need "CAN" type ) i sucked this with my car :D
nice video but doesnt work for my 2007 audi b7
Thenk y
What is the Difference beetween vcds and vcds lite with a cheap cable??
VCDS is full version and VCDS lite is free but limited functions.
What are the "limited functions" What can't the lite version do?
VCDS-lite has limited functions vs full version. U cant adapt or recode modules with lite. U can check fault codes and clear them. VCDS-Lite shows all the DTC's but gives description only on 1st faultcode.
Does lite show your transmission level temperature for DSG fluid change?
yes
best instructions thanks !!
Can crack facilitate me? Thank you
Port status: OK
Interface: Not found.
help? :( I have a Scirocco from 2010
Maybe it's not compatible. Those 409.1 KKLs are not working with Golf 5 or newer.
@@funkblack so which cable will work with all newer models? Thanks
I think VAGCOM 20.4.2 can be used to VW cars up to 2020.
Nice
does this work on new cars?
X2
@@corneliosilguero2010 wat u mean by x2
thaks a lot
Good Day! Where can I buy the cable? Thanks man!!
Russnbvwbadlife thank You so much!!
when I press to test "interface not found" ???
Start all over, check all your drivers etc and your com, then try it again.
Same problem please someone help
Mine also does the same ,ie ports ok but interface not found is my cable not working so i quickly return it
Hello when i plug my vgl kkl 409.1 cable into pc it doesnt places on ports it places somewhere and it haves yellow triangle up and name of it its usb 2.0 serial can you please help me?
It's probably because you have windows 11 and max is 10 pretty sure
Legend