My Loopy Pro template using ToneStack Pro
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- First how to video, I hope it helps someone in the loopy pro community.
Using program change to change patches via Loopy Pro widget. I am an acoustic guitar player, and I love making templates for live use.
Gear used: Behringer Flow8 interface, iPad 10 gen, Yamaha APX7 guitar.
This is really helpful. Thank you so much for being so generous with your set up.
I like your template I just downloaded and bought Loopy Pro. I don\t have digi sticks yet. I just got the Spark Live and will be implementing this with that unit. I currently have quick drums on the Ipad and the Spark Live software. I have connected the Akai MP218 to the IPad also. So I have many things to learn on each of these units. I bought a little Tripod table that will hold the MP218, has holder for phone and I can lay the I pad on it. I got a mic stand and sure mic. No Midi foot controller or floor switches yet. I talked with a guy in Nashville using the Boss RC-600. This is a much cheaper way to go than buying that unit.
@@triplev3539 I hope it is going well for you.
Hermanito del alma, me ayudaste un montón, muchas gracias ❤ saludos desde Chile.
Thanks for the video. Does Tonestack Pro support using AUV3 plugins for "pedals" in the chain. I know it's built in pedals or plugins are nice, but I really like the FabFilter, the Eventide, etc. which I've purchased? Right now, I use an aduiobus for each preset, and then route the audio signal from the IN to the specific audiobus I select for the preset. The frustrating part there is the step dials are not designed well for this; users need to "scroll thru" or "nudge thru" or "step thru" to the specific preset, WITHOUT actions happening or executing for the other presets along the way, which I do not want to select. There are feature requests in the roadmap; who knows if they'll get to them, or even understand the issue. Extra frustration with LP. I love the ability to use studio grade plugins (the ones I mentioned), but the preset selection issue a problem. It would be so cool if Tonestack Pro allowed you to use AUV3 plugins in the chain along with their own plugins /pedals. Thanks again for a great video!!
Follow actions on loop launch is genius. I will be stealing that for my setup!
@@Densmode3dp how is it going? Are you still using it?
@@AndrewKucks I kinda go in spurts when it comes to music! Right now I’m working more on the pc in cubase and maschine, but when I feel like jamming I bust out loopy. I did utilize this technique into my template, which allowed me to sum my 4 inputs into one in loopy, simplifying things.
Thank you! Nice setup! Subbed and liked.
Thanks for the sub!
Thank you sir
How do you know which PC is for each PRESET in Tonestack pro?
Thanks!
Trial and error really, from memory I put all my ToneStack presets into one bank. Then you can set up the stepped dial to send midi / program change/ to virtual midi out on channel 7 and the value to the preset number in brackets in your ToneStack pro preset list. In my case, that’s value 0,1 & 2
Hello Andrew I'm using Loopy pro with ToneStack Pro and I would like to contraill the WAH Pedal of Tonestack Pro with my Expression Pedal.
Do you have an Idea how to controll that WAH going up and down. TANK you !
If I want to use a microphone and a guitar (from quad cortex) would my scarlet solo interface work or do I need it to be a mixer?
@@Grael_bbx I’m not sure, I use the behringer Flow8 for everything. It is a mixer as well if something goes wrong , I have a backup.
Great video, when you count in your song, is it like a tap tempo, meaning that the tempo of your song adjust to your count
Yes the purple donut is key. I use it as a one bar tap tempo. It runs throughout the project so that the patterns remain triggered in Digistix2. Lots of options.
Thanks for the great video Andrew! I am just getting started with Loopy Pro. Are you not using an audio interface to connect the audio from the iPad to the PA? I play in an acoustic trio and want to use DigiStixs 2 for drums. Do you preset the beats for each song in advance or do you do it on the fly live? A video would be great when you get a chance. Cheers Keith
I use the behringer FLOW8 as my interface, and my live mixer. You should check it out. More videos to come.
Great looking forward to it! Cheers @@AndrewKucks
Do you have the FLOW8 connected to the iPad via Bluetooth or wired to the desk? @@AndrewKucks
Hi Andrew and thanks for you videos. beginner with loopy pro i need you to help me. I use LP with my electro acoustic guitar an irig hd x and an ipad (9 gen). i have tone stack pro and I wish to switch effects like in this video. I thought i could find tone stack as a audio unit input but no. it seems i have to create a new bus with tone stack effects but don't mange to follow your tuto.
Have you got this template? I’m happy to share it with you. That might help you to reverse engineer how I’ve made it.
Find me in the Facebook loopy pro user group or email me first babe dot last name at gmail dot com
Do you know how to share/export a template?
I’d be happy to send it to you. You could try emailing me. First name dot last name at gmail dot com
Sexy and talented thanks for sharing 😊 loopy pro