I came across your video for burst discs that was published 3 years ago. I am really glad that you still follow your passion and love what you do. Hats off sir.
I've been using those DIN plugs for a few years now. My success rate on the pressure release is about 25%, I have to typically wrench them off if they get pressure built up. I keep a beaker bar and a proper socket in my kit (which doubles for use on tires and people who complain too much), as I've had a number of tanks drain on me overnight so every tank has those on it. You get about a turn and a half and then you hear a small hissing sound.
@@toadou8127 They vent just not completely enough to remove by hand. No matter how long I press it. Just easier to break out the wrench I keep in the car.
@@Teampegleg I've had that happen too sometimes but haven't tracked which of the plugs do it so not sure if any are worse than others, have bought about 15 over as many years. Pushing the button can be hard. Close the valve. Holding it in for a few seconds seems to let all the gas out but occasionally can't remove the plug. Releasing and Pressing it in for a few seconds another time or time or two almost always allows mine to be removed by hand. Only about twice have I needed 1" wrench.
Nice. Is there also a cap to protect the end off the inflatorhose? I have two on my regulator, one for the BCD and one for the dry-suit. In the swimming-pool or with a wetsuit the end of one inflatorhose is unprotected.
There may be a cap for the end or remove the hose and plug so it doesn't flop around. Check out Trident to see if they have something you can use: www.tridentdive.com A
Hello Mr Alec,watching a lot of your tips videos, and I have a big question, I haven't found a video about: After you change the batteries and o-rings at your computer, how do you test if everything is OK? I read that it is better to send the dive computer to the manufacturer to test the calibration, and if it has maintained its waterproofness, or if the depth gauge is still correct as a measurement. Please let us know if you have already addressed this topic, because I have not found any video about this topic. Thank you very much.
Changing batteries is never usually a problem but changing o-rings might be. Are you sure you have the correct replacement o-ring? If so, maybe try a test dive in a local pool. Many dive shops organize regular club dives to quarries, pools etc, so testing there is good. Otherwise on your first open water dive, check on entry for bubbles from the computer (air integrated or transmitter type). Ask you buddy to check for any leaks from the transmitter or hose on the 1st stage. Any leak, even champagne bubbles (very tiny) are an issue. A final solution is to ask your local dive shop to depth test the computer in a pressure tester. It's a sealed container that gets pressurized to 130 ft to verify operation and correct depth recording. Hope these tips help and safe diving. A
Thank you so much, very helpful. My Computer is Uwatec Aladin Pro,without O-ring ,And to change the battery is very hard, do you have to disassemble completely the computer. Inside is full of paraffin and to close again the diaphragm you must have to be careful to not leave air inside. Thanks for for your help anyway. Good job! I love this channel,I'm a 2nd level CMAS GREETINGS from Sardinia Island scuba diving club@AlecPeirceScuba_SeaHunter
Having a Second Stage purge button fall out, I would like a tool to tighten if needed. Came apart 30 feet down. Almost wrecked my AOW Certification Class
awesome. I just converted my pony bottle to DIN and I was wondering that exact thing with the plug. Didn't know about the pressure relief ones...off to the dive shop I go
I came across your video for burst discs that was published 3 years ago. I am really glad that you still follow your passion and love what you do. Hats off sir.
Wow, thank you! Still love doing these.
👍😎🇵🇭🤿! I love the new cap for the second stage and hose as I service my own gear! Thanks for sharing!
No problem 👍
I enjoy this for Christmas ideas, for me! Going to the SCUBA shop for air always includes something else
Need something shinny and new to go with the filled tank!
A
I've been using those DIN plugs for a few years now. My success rate on the pressure release is about 25%, I have to typically wrench them off if they get pressure built up. I keep a beaker bar and a proper socket in my kit (which doubles for use on tires and people who complain too much), as I've had a number of tanks drain on me overnight so every tank has those on it. You get about a turn and a half and then you hear a small hissing sound.
I have to use a solid object, like tip of wrench, to push button far enough to vent.
@@toadou8127 They vent just not completely enough to remove by hand. No matter how long I press it. Just easier to break out the wrench I keep in the car.
@@Teampegleg I've had that happen too sometimes but haven't tracked which of the plugs do it so not sure if any are worse than others, have bought about 15 over as many years. Pushing the button can be hard. Close the valve. Holding it in for a few seconds seems to let all the gas out but occasionally can't remove the plug. Releasing and Pressing it in for a few seconds another time or time or two almost always allows mine to be removed by hand. Only about twice have I needed 1" wrench.
Good feedback to share with the maker of the DIN plug. I know most listen to divers concerns to make it better (some don't, or not right away).
A
I like the pressure release din plugs but it would be nice if they had a hole on the outside lip and tether like some other din plugs.
To keep better track of them, screw them into your regulator "dust" cover when not in valve.
@toadou8127 that's what I generally do but sometimes a string would be nice.
I hear your. Send your feedback to the maker telling them lots of feedback from divers here they can learn from.
A
Thanks I need it
Go get it if its 'needed', and look around for more stuff you don't need.
A
Nice. Is there also a cap to protect the end off the inflatorhose? I have two on my regulator, one for the BCD and one for the dry-suit. In the swimming-pool or with a wetsuit the end of one inflatorhose is unprotected.
There may be a cap for the end or remove the hose and plug so it doesn't flop around. Check out Trident to see if they have something you can use: www.tridentdive.com
A
Hello Mr Alec,watching a lot of your tips videos, and I have a big question, I haven't found a video about: After you change the batteries and o-rings at your computer, how do you test if everything is OK? I read that it is better to send the dive computer to the manufacturer to test the calibration, and if it has maintained its waterproofness, or if the depth gauge is still correct as a measurement. Please let us know if you have already addressed this topic, because I have not found any video about this topic. Thank you very much.
Changing batteries is never usually a problem but changing o-rings might be. Are you sure you have the correct replacement o-ring? If so, maybe try a test dive in a local pool. Many dive shops organize regular club dives to quarries, pools etc, so testing there is good. Otherwise on your first open water dive, check on entry for bubbles from the computer (air integrated or transmitter type). Ask you buddy to check for any leaks from the transmitter or hose on the 1st stage. Any leak, even champagne bubbles (very tiny) are an issue. A final solution is to ask your local dive shop to depth test the computer in a pressure tester. It's a sealed container that gets pressurized to 130 ft to verify operation and correct depth recording. Hope these tips help and safe diving.
A
Thank you so much, very helpful. My Computer is Uwatec Aladin Pro,without O-ring ,And to change the battery is very hard, do you have to disassemble completely the computer. Inside is full of paraffin and to close again the diaphragm you must have to be careful to not leave air inside. Thanks for for your help anyway. Good job! I love this channel,I'm a 2nd level CMAS GREETINGS from Sardinia Island scuba diving club@AlecPeirceScuba_SeaHunter
Love this. The plugs are better than the blue rag I use to plug stuff when working on things like my car. LOL
Now we need high tech rags!
A
Greetings from Egypt sir❤❤
Hello from chilly Canada at 3C today. Want to trade???
A
@AlecPeirceScuba_SeaHunter No thank you 😄, sir, but I would like to have you here. you are more than welcome anytime 😊 it's 29 c here BTW
Having a Second Stage purge button fall out, I would like a tool to tighten if needed. Came apart 30 feet down. Almost wrecked my AOW Certification Class
Oh no. That's not a story the class wants to tell.
A
awesome. I just converted my pony bottle to DIN and I was wondering that exact thing with the plug. Didn't know about the pressure relief ones...off to the dive shop I go
Glad I could help!
A
Or just use the old case that diving mask came in, put the regulator in and is proteceted. Electric tape would do the job too. :)
Possibly but any airborne contaminates should be kept out of the 1st stage.
A
More stuff to put in my tool box LOL
More high tech cool stuff no one else has.
A
Please keep this series going! Great stuff! 🤿
I will try. Coming up to 10 years in May, 2025.
A
The first time you lose trimix due to knob negligence that DIN plug very quickly becomes a need 😂
Hope it works as a fix for you.
A
Interesting...But "Stuff You Want, But Don’t Need"...Applies to more than just Scuba Gear...Just ask My Wife...
I'd ask mine but she says that about everything i buy.
A
Please live a long and healthy life
I"m trying too. Still have lots of tips and stories to tell.
A