Yup I was thinking the same thing. All depends on where the bolt is and the geometry. Sometimes the flat wrench works better, sometimes the offset. I would keep both if I had them!
Exactly, mechanic and gear head all my life. Flats and crows foot all have purpose. Never ever thrown a wrench or tool out, have had to heat, bend, grind and weld to make a custom tool for just one job.
As an industrial and commercial electrician, I’ll never own a tape measure without a magnet, matter of fact, I always choose the tape measure with the strongest magnet. Drop a screw or a wrench off your ladder, just push the tape down and use the magnet to retrieve your item, really helps save your hips from unneeded trips up and down the ladder.
As a machinist/fabricator I hate magnets on most things including tape measures, they collect metal chips and are a PITA to clear every time they are used.
@@nickjunt3817 Well from some other comments and what he himself is saying his primary work is with wood, so consider his personal opinions in light of that. I don't always agree with him, even on this vid, but I would not say "he has no idea what he's talking about".
The tape measure one baffled me, you bought a magnetic tape and complain things stick to it? And you don't even clip it to your belt you put it in your nail pouch
@@TheOnefalcon07 I have the magnetic and the auto lock 16ft tape measures, i really like mine, for $10 and the fact that home depot will replace them anytime they break, you can't go wrong them. I will agree with him thouhh when he says the fat max is the best way to go.
@@TheOnefalcon07 to each their own, maybe im biased because the fat max was my first tape but I'm also a milwaukee fuel fan boy and use the 16ft auto lock tape now that everyone else hates for some reason, their tape measures have come along way
@@TheOnefalcon07 I personally don't think the milwuakee tapes are that great. They get some things right and others wrong. I dislike the rounded shape of them, they see square and round designs now, but the round one just rubs me the wrong way. I dislike the markings near the foot marks. They make too big of a deal about being right at a foot mark so they reduce the height of the ticks to all match, so I have to very carefully make sure I'm reading it right, rather than just taking a glance and knowing exactly which 16th I'm falling out on. They're also very large for their size. Their 25' tape is as big as a 35' tape. I'm not a framer. I'm typically doing more pidly things in smaller spaces. Very rarely do I need a tape over 16'. And even their 16' tape is just far too big for me. I like those cheap green ones that homedepot used to sell. Lowes now has them as craftsman. My only gripe with them is they have 32nd marks for the first foot.
@@billybobjoe198 i do hvac commercial work so the bigger and fatter the tape the better for me. If I was a framer or carpenter it'd be different, that being said I dont use anything over 16' anymore
@@paulnicholson1906 Or I could just make one with the mill, heat it in the forge and temper it in oil. Just need to decide what color I want. Do I paint before or after I stamp the size? Sorry I've been auguring with Democrats way to long. Got to quit doing that. Have a good day. Good idea.
@@spudpud-T67 Why couldn't it have an offset? I've got reverseable ratcheting wrenches with offsets, I've got flex head ratcheting wrenches, and I have flat ratcheting wrenches.
I keep learning the hard way, never throw away any tool unless you have an EXACT replacement for it because you never know when you can need it for some random hobby or project you didn't think you'd get into. i once threw away this cheap Black and Decker corded drill driver cause i started investing in high quality tools. now im wishing i hadn't done that cause i could have used it as a cheap car buffer. And at the very least, you can use those cheap tools to give to your neighbor when they will inevitably come over to barrow a tool.
Yes, I certainly would not just throw stuff like this in the trash (assuming it was not just for drama)-- that's bad for the environment (Mr. Forester). Some of these could be made into other tools or given away/donated to someone that might find them useful. I would at least have removed the cord from the Jitterbug sander for a future part replacement for something else. OK, that tape measure was trash.
The tools I throw away. The Allen keys that come with things. The bit driver sets that are only odd sided flat blades and rounded out bits. The bottle openers that come with tool kits as if everything in a shop isnt also a bottle opener. Hell my workbench opens bottles. And then any wrench that rounds things off I've even had this in a set of mac line wrenches the small ones were fine the big ones opened up when used.
Made this mistake giving a 1h nicd charger to goodwill. Realized i have some batteries that aren't registering with the nice looking "smart" chargers anymore.
@@bryceg5709 I have so many of those dang Allen keys because I keep thinking I'll eventually think of SOMETHING to do with them because throwing them away seems a waste.
When you want to upgrade your tools; pass your old tools to someone else...for free. They may not be great tools, but they're better than no tool at all and it helps get someone else started. Spray foam is the devil though.
@@carlzirk every tool is dangerous. i use bow saws all the time; have yet to have one snap. if you're seeing that happen, you've got the blade way too tight.
He acknowledges that multiple times though. Admits it's mostly operator error or for his particular applications it doesn't work. He's not saying they're horrible for everybody and that nobody should ever be allowed to own them 😂
Some simple advice to avoid these pitfalls in the future: 1. Good tools aren’t cheap, and they don’t come in 2-for-1 packs. (Tape measure and caulk gun) 2. “Good” is subjective. However, as a baseline, good tools have a purpose. If you you don’t have a use for it, it isn’t a good tool. (Jitterbug and crows foot) 3. Never use a weapon as a tool. 4. Never throw away a tool that may be useful (and safe) for someone else. If you don’t sell it or donate it, take 30-45 minutes to post up with a table in the back of a hardware store parking lot with a sign that says “free tools”. They’ll be out of your hair quick…at least in TX.
I disagree with the discount tools. You see a lot of good small brands do that. i got about a few sets of magnetic screw drivers a few years back, standard, phillips, torques, square drive ext for buy 2 get 1. They've all been amazing for my applications. Now if I was a full time auto mechanic would I buy 2 for 1 tool kits or just buy a nice set of tools...yea probably would go higher end if it was a work tool.
Exactly I don't have a rachet straight wrench with a bend they are all flat. Oh spray foam, cmon its supposed to expand. Also we have hundreds of pairs of channelox, we never have problems, like you said operator error all together.
Stopped watching the second you threw that gearwrench away. As a mechanic, those made me sooo much money, more than that "awesome" snap on off set wrench did.
"A poor craftsman always blames their tools" Never heard a 1/4 sheet sander called a jitterbug sander. Good luck getting into corners with a RO sander....
Because always has good tools. In my experience, many many times I have tried to do things and came to the conclusion that they're hard. Then I have the opportunity to use a professional tool and WOW. The tool makes all the work. It's just easy without having any experience. From drilling to painting and cutting or applying glue or whatever.
@@rubenayla That's called having a metal block. The average person picked up the average tool and got the job done fine, for 100's of years. Only today do we have whiny snowflakes that need a special tool to do an ordinary thing or else everything goes wrong,, lol.
With all due respect, some of these tools and products have their place. Sometimes offset wrenched just don't fit in some spots. The foam we use to fill in the holes in robinson decking when putting in sleeves and yeah the crows foot is essential for torquing anchors when setting transformers
Back in the 80s my boss lost his temper and he was in the back of the van throwing stuff around and a block landed on a can of foam and exploded .we stood there watching him expand 🤣🤣🤣
Steve Taranto the tape measures too. I pick up the same two pack and it made my fingers look like a hotdog that stayed in the microwave for to long. After the 37th time of it cutting my finger in slammed in on the cement to make sure it would break.
Totally agree..... at least about the zero offset wrenches. Crows foot or flared versions also have their place. I don't use them daily but when you need them, they're the only tool to use!
@@connorstuart5023 Because he was or still is a tool nut. He collects tools he thinks he may need. I was like that and now that I'm retired I have a bunch of tools I don't need. Although I rarely ever bought tools I didn't need.
That "tomahawk" hammer is actually a roofing tool. It was designed for splitting shake shingles to the needed width then flip the tool to nail the shingle in place. Shake shingle roofs are, for the most part, a thing of the past due to the fire hazard. Bow saws were never meant as a precision cutter they are for cutting tree branches off the tree or to length for fire wood (this is pre chain saws).
I’ve worked on many different farms and ranches but the best one was when the boss built a new shop and I helped clean out the old one. He was just like this going thru everything and throwing out the “junk” tools and I backed up my pickup to the door and filled it up for my shop hahaha it was better than Christmas hahaha
@@SirCanuckelhead of course they work everywhere. They do still have a non offset side with an open end. Some even have a "ratcheting" open end. I've been working on cars and now boats and yachts professionally for almost 20 years and have never once needed a non offset box end wrench. 🤷🏼♂️ Do yourself a favor and throw out any ratcheting wrenches you have without a reverse lever though. When you back it off into something and can't reverse it you will be cutting it off. It's happened to my coworkers more than once.
@@drksoldier1well your experience does not cover all the needs of wrenches. There are 100% spots that only a flat would work. Silly to think otherwise really.
On the spray foam, I've kinda stumbled on something that may work. In my case I removed the trim around my window, and used the foam to you know to make sure the outside wasn't coming inside. But after I sprayed the foam I used blue painting tape and taped over the opening and made sure the tape was pressed firmly on the wall and on the window. When the foam was dry, oddly enough the tape pulled right off and thats where the foam stopped. Worked pretty good.
Sounds like too much hassle. When I've foamed around a window, I used a proper foam gun, then left it to expand out and just cut the excess of when it's dry. Took me however long it takes to run a knife along the edge of the frame.
Yeah you got lucky or had cheap foam... Some of that foam will push trim boards loose when it expands.. I don't see painter's tape stopping it.. and I know about painter's tape because I'm a painter... You don't need much foam to fill most cracks and a sharp knife or 5in1 scraper will cut excess off...and I'd much rather scrape off excess than use fiberglass insulation
basically this entire list reeks of a carpenter both being kind of ignorant as well as really stuck up. I have no idea who would carry their tape measure in a nail bag, either.
@@Adam-hp5hj yeah I just left a comment about the tape measure cause being a welder I prefer the milwaukee with the magnetic. Saves me from having to stop someone else from working to hold the end of the tape
He is complaining about the smallest flaws in tools, cause he can afford tons of them. Instead of throwing those tools away, give them to someone who is starting out, who cannot afford it. Instead, he sees the tiniest flaws, that other people will not mind at all.
He knows a good amount to make himself think hes an expert on every tool ever made. Came here just to see what bs he's spilling out his mouth this time.
Solutions: 1 Heat up and bend the wrench. 2 Use a punch and break the magnet, wear gloves. 3 Cover all your cloths preemptively with spray foam, (shooting it more fun than tossing it). 4 Weld crows foot to ashtray for cigars. 5 Jitterbug sander, you can revive burnt toast. 6 Caulk gun, yeah that’s junk. 7 Skill saw, dig the spray foam back out and encase the saw in foam so no one else has to use it. 8 Channel locks good for hot grates or handleless pans on the grill or campfire. 9 Bow saw.. hold on for a sec. 10 Tamakawk, use the bow saw and cut the handle off of it. Throw both tools away.
He's whining about the starting torque. I've used that exact model and it works just fine. No better or worse than my old skil. He's pretending to be a big tough manly man but he's more of a snowflake than the people he whines about. 😂
He must be one of those people that like to have the saw blade touching the line before they start it. Having too much torque would move the blade position and be annoying for someone like that. I always start my blade then move it into position as that's how I was taught.
@@drengr2759 He probably bought it because it has the blade on the correct side. For general use I never understood why they moved the blade to the right side of the saw for regular saws. It puts the load on the outside putting way more strain on your wrist while pushing, and it puts the cut out of sight. Sure sometimes you need it on that side, but sometimes you need it on the left side. I think it must be women were cutting their fingers off when the blade was on the left side.
I’m a carpenter of 26+ years and I LOVE MY MILWAUKEE TAPE MEASURE, I’ve owned all the others and Stanley Fatmax is 2nd to my Milwaukee!! HINT: KEEP THE NAILS OUT OF YOUR TAPE POUCH !! Nails have their own pouch on your belt !!
I do hobby metalwork and after realizing how stupidly strong the steel is in Klein Tools (especially their needle nose pliers), I got one of their tape measures. There's a vid on here of a guy comparing all the tape measures. Klein did really well in the tests.
For me, I still prefer a Craftsman measure. It has a 2-sided end-catch and is easy to read for my bad eyes. I don't need standard and metric. Just give me big print American measurements. 🤣
What, the guy who leans over a running chain saw, or pours diesel fuel by the gallon onto the ground above his well, or the guy who complains about a shop owner who kicked him out because he was blindly knocking over every display with his daughter mounted like a backback, or the guy who talks about how godly it is to cherish the land and leave it for your children while shouting over the noise of a caravan of logging trucks hauling off timber he's harvesting in an unsustainable manner off his property etc.? LMAO yeah this guy IS a worhtless tool.
I think the last Wankerstar video I watched was the one where he was making a big show of keeping a pistol on his hip while working with hay or something. It was just so absurd to have that thing hanging off the hip while trying to work.
Best quote ever from one of my apprentices. "Is there really no video I can learn this from, or is this another one of you skill things I just need to get good with." Sorry kid, you just got to get good, he was hanging lights in a parkade. I wanted them up fast and deadly straight, he was not having fun.
The hate for bow saws is hilarious. They're log saws. Anybody trying to do joinery with one may aswell be using a hammer and wedges for accuracy and ease Crow's foot spanners are a specific use tool bit like a basin wrench. Most people won't use them all the time, but the job it does it excels at Tomahawk I can totally understand
@@fedimusmaximus2454 yeah half the cut is on the push and half the pull. The one Wranglerstar showed is probably the best one on the market, made by Agawa
The wrenches without offset are absolutely essential for instance changing blades on certain power planers. You have to fit the french into a narrow gab, which would be impossible if it did have an offset. Same with reaching to any narrow space to take a hold of a bolt to be able to unscrew the nut from the other side etc. Both have their places and it is best to own both.
And if you've got a hot wrench you can contort them to any shape. Every now and then I hace to ruin/alter a standard wrench for a particular troublesome nut or bolt. Ditto for the crow feet, not used often but when you need them, priceless.
One man's trash is another man's treasure. Don't just trash them, hand them to the next person in need so they can build their own frustrations. Seriously though, for someone who does not have anything these will come in handy.
As much as I agree 100% with everything in this video, it was extremely painful to see you throw away that spyderco tomahawk. Those are not cheap and definitely hard to find, and I know so many people who would've paid quite a pretty penny for it
I grew up working on my own cars, and discovered early on that every tool has it's uses. As a master carpenter, with 50 years of experience I have also learned that 99% of the complaints of the problem with a tool are operator error. A true craftsman will learn to use the tool in his hands, before blaming it for his short comings.
Yes, and recognize when you need another tool. Most people who use tools add to their kit when necessary, and don’t just throw out a good tool (like a Channellock) because it didn’t fit a particular situation.
I can use the wrong tool better than most. I have learned from pros how to use every tool I own. I live in a tiny home and I can't store tools that don't work good enough. I am a residential wood stud framer and owning the right tool is paramount.
Cody I would pay shipping for your crowsfeet set. I'm a beginner diesel technician and have needed them countless times. Please message me if you see this.
I work on industrial valves. We always use these on our torque wrenches when installing valves in pipelines. You just can't get a socket on the studs because the valve bodies flare out and there isn't enough room.
What you call a “tomahawk “ is actually called a framing axe and very useful for roof framing. Properly sharpened they can cut as clean as a saw. Great for adjusting bird’s mouth, notching etc without having put your hammer down. Mine all have nail pullers …
I framed with one years ago. I felt pretty awesome. Recently i bought another and used it for 3 months before I went and bought a normal California 21 ounce framer. I use the framing axe to cut kindling and take it camping
This guy is funny! I've always been told "The right tool for the job." This guy is the wrong tool! but he did do a great job of showing his lack of knowledge.
I nearly had a stroke when he said the jitterbug sander is useless. As a painter (interior and exterior house painting) I have used these sanders to strip 50 years worth of paint back in seconds. I'm talking several layers of oil, lead and acrylic paint. An 80grit will make short work of anything, yes jitters aren't as great for stock wood removal (which isn't what they're designed for anyways) but for sanding paint which the jitterbug is primary used for (or for fine finish on wood) they're great tools. The jitterbug sander is cheaper to supply sandpaper for. Orbitals need special and rather expensive pads. A pack of pads for an orbital sander will set you back 50 bucks. you can get 4 different grit rolls of sandpaper for 50 bucks. Also the square or rectangle shape lets you get in places an orbital struggles to get, specifically corners. When you sand a house with an orbital sander it will miss a few square inches on every board where the weatherboard meets the scribe of windows or the corner boxing of the wall. You either have to hand sand the (literal) hundreds of missed spots because the orbital is round or you use a jitterbug and save yourself hours of work. In general yes I think the jitterbug isn't as good as an orbital (in general) but you can get a similar amount of work done and a similar quality with either tool. To imply they're bad is mind bogglying. Knowing how and when to use a tool is pretty important, if you don't know how or when to use a tool then yeah you'll think it's a bad tool. Take it from a guy who has years of experience using all types of sanders for all applications, the jitterbug absolutely has it's uses, anything who thinks otherwise is wrong.
I have the Makita worm drive saw, and yes the torque is a problem. Just make sure you are not too close to the wood when you pull the trigger. It is a beast of a saw, though. I've cut a lot of concrete with mine. The torque is part of the reason it can do the hard work. Like most Makita tools, it is good.
My experience has been the reverse with wood. I always get swirls with the jitterbug which have been totally eliminated by the orbital. I get that it could be an issue with aluminum though.
I've hand sanded a shovel before. Literally took two days and many sanding papers. No way that handsanding would be quicker than using this power tool.
Fringe Wizard I used to use it for table tops. For me, it wasn’t that it was slow, it just would leave swirls all over the piece that would show up when I stained it. Switching to an orbital fixed that.
@@FringeWizard2 I doubt this or any other power sander could do a shovel with all the contours it has. Sandblasting prolly the way to go. MAYBE a corner cat but you'd end up wasting tons of pads since you could only use the tip on most of the shovel. I'm obviously bored. I know this isn't important enough to be commenting on :)
Dang, half of those tools are in my work van right now. Guess it’s because I’m a real tradesman and know how to use them. Really hope you didn’t actually throw that worm drive saw away!
I dont even throw away the free tools that come with something, like allen wrenches and flat head screw drivers, I know they are junk but in a pinch, they work.
@@chuckmiller5763 This. I learned it from my grandmother of all people. She used to do a lot of DIY stuff when she was younger and she kept everything, used screws, old screwdrivers, absolutely everything. Now that I'm helping her out in her new house if I don't have my toolkit with me I just go into her hoarded over decades collection and grab what I need. For example a knob had come off a wardrobe door (they had some weird fitting that was press fit rather than screwed in) I go into her gack box of screws and find one the exact perfect length for getting it properly (re-)attached so she isn't pulling at this stubby spiked thing with arthritic fingers. So many times have I been saved working up at her place because she never threw anything out.
Just because a tool is upgraded in some form does not make it a bad tool, looked like those channel locks have had years of use...last week I needed a 3,4 (with no offset) wrench to release tension on a serpentine belt, offset would not work. Have $39 H Freight reciprocating saw for cutting oil tanks in half and tree roots, use my Bosch reciprocating saw for cleaner work. The Makita framing saw is a beast..I would of taken it! Lastly that caulking gun is $2, sounds like you have a beef with Home Depot not the tool. The tools you tossed have a useful place.
For the record, I use jitterbug sanders for fine finishes. I’ll sand polyurethane in between coats with those because orbital sander can sometimes be too aggressive when you don’t want to sand through a finish, and the jitterbugs work perfect because they sand much lighter.
In his defense, he said anything made by bosch wasn't worth anything "anymore". Implying recent tools, by my interpretation anyway. His opinion isn't a rarity from what I've seen online lately. I loved bosch, my 1613evs plunge router just passed on to router heaven after close to 20 years of use. I bought it when I was a kid without a lot of money and it certainly didn't owe me a thing when it died... I'd have happily replaced it with a new bosch until I started reading different reviews online, now I'll probably just take my chances and buy another used 1613 when I find one in good shape instead.
So hits his knuckles using a wrench cuts his fingers with a measuring tape and the makita has too much torque for your grip.I think the problem is you have weak sensitive hands
A non-offset wrench makes a lot of sense in certain space situations, especially one with a ratcheting box end like the one shown in the video appears to. Sure, in most cases you can get the job done with either the straight open-end or the offset box-end, but sometimes you get the right combination of constraints and it's all that can do the job. Sometimes only a straight wrench will fit, but the open-end isn't giving quite enough grip. Or the space you have to turn the wrench might be really tight, too, and you just need the extra wiggle room a 12-point gives. Better to have one and let it gather dust than to not and wind-up needing it, I think.
A 5/16" flat ratcheting Gearwrench saved me gobs of labor because I used it to remove and install 8mm water pump bolts on a Ford engine where the repair manual said I had to remove the motor mount and raise the engine to get enough clearance to get access to the bolts in order to replace the water pump. Nope. Just needed a very slim, straight ratcheting Gearwrench.
Hey man just throwing this out there I’m 24 and was fortunate enough to walk into my own homestead we got for a good deal.. 120 year old house and bars but not in to bad of shape.. from someone who would really appreciate and has really app related assistance from others and especially more experienced guys.. I hope you aren’t throwing those tools away... I’ve bought and been given many old and used tools that aren’t perfect but tools are pricy now and some of us haven’t had generations of tools passed down... in short find a young guy who needs them and give him a hand. We need it and appreciate it!
He used to have interesting videos but now it seems like he just showing off his tools. I think if he built a breadboard he would still get his tractor out to drag a tree out of the woods to make it.
ah ... the caulking guns ... when I was a kid growing up I would take them from my dad's toolbox and they became my "sub-machine gun", the imagination of kids growing up ...
Almost all of his videos are highly informative, helpful, and even entertaining. This isn’t one them. I got about 1/4 of the way through and said, “I will suffer this no more!”
I bailed out when he showed The Makita Worm Drive saw and didn't like the torque power~!! Also that curled over plate is so you can slide it around on wood without it catching or marring the material or causing you to catch it on something and losing your grip on the saw. Also 50 yrs. ago the "Skilsaw" was the bomb but no more. And I won't even mention my Channel Locks~! As they say= "One Man's trash is another Man's Treasure" 😆
Yeah.. he's not very knowledgeable about woodworking tools.. that Makita Worm Drive saw is highly useful and sought after... They cost about $300 or did when I last priced one.. and they are much better to use because the blade is on the left side so you can see what you are cutting
Your thoughts on the bowsaw are interesting. My great-grandfather mostly used them for making furniture, not cutting through larger pieces. I think they're mostly meant for finer cuts made in a comfortable posture, in your workshop. Mind you, he had to build his own tools, so perhaps the bowsaw was more convenient to make and replace. I definitely don't think he would have used them for over half his life if they didn't cut straight occasionally, the furniture around the farm is all made by him and nothing wobbles ;) Totally agree on the tomahawk, they're not as widely useful as people think. I like my tomahawk head because it's light and the trees around me grow limbs that are good for a DIY handle, but I wouldn't ever carry it around. I keep it in my car so I always have an axehead, but I wouldn't rely on one for anything more than basic, sloppy work, and only in a pinch. Still better than those survival abominations that have serrated edges and can openers on every surface.
I knew where he was going with the bowsaw. It amazes me the tools I purchased in my younger years. Thinking at the time I was making smart purchases. Probably half the tools I bought (either as tools or survival gear) prior to 30 I've discarded. They were all just cheap junk intended more to catch the eye than be a practical tool. Silky saws rock in my opinion. I have two in my truck. One is a Silky Katanaboy that I've never used. But since it is only in the truck for emergency purposes, odds are I'll never use it in my life time - short of an emergency on the road and the tree is too thick for the regular Silky saw that should be a mainstay in anybody's tool kit. As for the caulk guns, those things were intended to be throwaways after a single project. They are no thrills units. Their target audience is the guy or gal who literally might be caulking once a year and just doesn't want to mess with an old caulk gun. The tomahawks are weapons of war. I've used a few for hiking and such over the years. I even have one still in my gun case. But I'm not using it to chop wood. They simply are not practical for that purpose. Its purpose is to chop skulls. You need to make kindling, use a hatchet or a small double bladed axe. Personally, the hatchet works great for small jobs, but as soon as you want to cut something as thick as your arm, you are going to want the axe.
“Every time I pull out the tape measure it has screws on the magnet.” You do realize Milwaukee makes other tapes without magnets... Don’t blame a whole brand on your dumb mistake to choose a magnetic tape which is what the STUD series is... hence why it’s called STUD.....
The cheaper ones dont. That hole just kinds chews off the end after about a dozen bites. Havnet bought one in years since I have an electric one now. but as I recall the ones of that style always had several options. the 2.99 one the 6.99 one and the 12 dollar one. the 12 dollar one prolly works just as well as his plastic yellow handle one.
@@flyingsodwai1382 why probably gonna use a caulking gun like maybe once a year unless you remodel houses or even then they are ok and get the job done.
who uses the cheesy cutter on the gun to cut the tube and who punches it with the built on probe that then puts a glob of caulk onto the barrel where you are going to get it on your hand?
@@pixelbob7983 Anything you want waterproofed can be. If you own a house, you have to have them. I recently installed some lights on the side of my house and, yep, I caulked them. IP44 wasn't good enough for me, so I made it IP67 with the caulking gun.
I work in steel and I love the Milwaukee magnetic tape. The belt clip is really nice because it never bends out, the tape has markings on both sides, the body is an even 3 1/2 inches long, the hook is nice and big, the finger rest is way more comfortable. I also really like the flush ratcheting box wrenches because they take up less space and they can get into tighter spots. You should always have more than one type of wrench, anyway. Anyone who says otherwise is a fool
One of the things that drive me nuts about modern advertising. These tape companies acting like they've invented the wheel by including the measurement or having some sort of even measurement on the body. That's pretty standard. My new lufkin nite eye is marked 3.25", my 20 some year old stanley powerlock II was a dead even 3". My grandfather's Carlson Big Chief 12ft tape with metal body was an even 2" and marked and it's from the 40's or 50's. They can stop acting like they invented this 'feature'. lol.
WAS the box wrench ratcheting? I couldn’t bear to watch too closely. I imagine if it was offset, he’d complain about it being impossible to use. Which would at least be a valid complaint.
I started with the milwaukee tape they start to tear really easy for me at least. I bought a Stanley Fatmax and it's been one of the best tape measure I've used so far.
What to heck you bought a warm drive saw for? That is like buying an 18 wheeler when you need a wheel barrow. People who use those need need the toque to cut heavy timbers and hard wood, Nothing stops them.
Agreed. Was given an old 8 1/4" worm drive Skilsaw about 45 years ago by a production carpenter who worked for me. I used it to frame three houses and a barn for myself and today it sits in its case waiting for the next big job. If I need a circular saw today I grab a lightweight 7 1/4 or a battery 5 1/4 for a quick cut.
Right? I’m a noob with woodworking and a few minutes Google searching was all I needed to tell me that worm drives were not for my DIY stuff. Also, he complains about the heavier steel shoe: physics tells me that this is a feature, not a bug, when dealing with high torque, because an extra few pounds can increase the inertia by 10-20%.
Yes set the front down on the board then it will torque into the board then you begin pushing, I learned to use a skill saw 7 days ago and first thing I was told was to set the shoe down on the board so I don’t get my wrist torqued
Exactly. I work at a Home Depot, and the makita battery operated and corded worm drives get EXCELLENT reviews from customers. They’re actually one of makita’s better products if what I hear from the customers is to be believed
Fame & wealth do that to a guy. Good reason to pray for him & but especially for his family since they got to live with him! Still like him though, inspire of himself.
Every tool here has been improperly explained. The “tomahawk” is actually used for installing cedar shakes. The bow saw is generally a camping saw. The box wrench without offset is used in auto repair where you can’t use an offset wrench such as when working along side a firewall. The worm drive saw is actually meant to be a heavy duty saw. The spray foam is easily removed with acetone, etc.. The Channel Locks weren’t properly adjusted. The sander is a “Finish sander”, etc.. I guess my father actually explained all of this to me. How painful to watch all of that stuff go in the trash when a donation to a group such as Habitat for Humanity would have quickly repurposed all of it to raise money for construction projects. Sad….
They definitely have their place, but the knipex cobras are just so much better. I’ve got a 6” and a 9” and they are invaluable tools. They grip so well and are so easy to adjust. The ones that he showed weren’t actually the cobras, they were the alligator pliers. The cobras have a push button that has around 20 positions which makes it easy to get a really good grip on round material. I swear by them.
@@grahamwaldo331 aint even a cobra in the video though. but yeah, myself started with an cheap set of pliers, more or less immediatly bought knipex ones after some use. cheap wrenches work fine, cheap pliers are horrible to work with :D
I dont like ratchet spanners they just dont fit properly and by the time i get one out i have got the job done with a normal combination spanner. Secondly they cost more than they are worth. But having said all that i never throw away tools, you never know when someone wants to borrow a tool, thats when i give them my rubbish tools, i have learnt never lend good tools because they never come back
Flat spanners and offset spanners both have many many useful applications. I'm a truck mechanic and I have both in my box for any sort of application that I come up against.
I bought a boxed end wrench without an offset specifically to be used to turn the shaft that raises and lowers the spare tire on my truck because it is easyer to turn with it meeting the shaft at a 90 degree angle instead of the offset angle so they do have their uses. The tire iron was susposed to have a hole in it to be used as a crank acording to the manuel but it was a used truck and apparently it didn't have the original Tire Iron it did still fit the lug nuts so I guess it's okay now that I have the wrench.
@@brianjohnston560 yea and you can get yourself in a pickle backing a bolt out and not having enough clearance to get the wrench off the bolt😱. Ask me how I know
Crows feet may be used in some other discipline but this mechanic does not use them. Im an ASE master tech and own my shop and have only used them once in 20 plus years.
Wow! I never throw tools away! I LEARN HOW TO PROPERLY USE THEM!! Then if I find I just don't use them that much, I pass them on to some else who might get use from them. BTW the Knipex are awesome, but I still have regular channel locks
My Dad had some awesome channel locks. Different sizes for different uses. I had my own by the time he passed, but I was happy to inherit his set anyway.
When I got sick I gave all of my tools and full snap on work bench to my neighbor who was a 19 year old kid aspiring to be diesel mechanic. He’s now 23 and owns his own shop. Sure enough that 23 year old I gave all my tools. Takes care of me and my truck every time it needs something and he does not charge me a dime. As my old man used to tell me. If you take care of people they will forever take care of you.
@@andrewmx2586 absolutely right! Too bad the new generation doesn't seem to get that. I tried to teach my son the same ethical way of thinking. He gets it. He's got a son now too. He'll pass it on.
STOP WHAT YOU ARE DOING AND GET SOME KNIPEX COBRAS - amzn.to/3jA2PVP - (amazon affiliate link)
Foam gun cleaner gets in off melts it
Pinned
Oh snap your wranglerstar lol, oops
I've had knioex cobras for months now and I looove them
See the new 100mm/4" Cobra XS hasn't made it on Amazon over there yet.
I use the"flat" wrenches daily, as an auto mechanic there just isn't room for an offset wrench in every place
That’s because you are a REAL mechanic, that uses tools daily; not a guy making videos and showing tools
Yup I was thinking the same thing. All depends on where the bolt is and the geometry. Sometimes the flat wrench works better, sometimes the offset. I would keep both if I had them!
Flat wrench is the best for torque converter when trans blow or engine
Exactly, mechanic and gear head all my life. Flats and crows foot all have purpose. Never ever thrown a wrench or tool out, have had to heat, bend, grind and weld to make a custom tool for just one job.
@@92camarodragcar73 My first go to wrench for torque convertors and crows foot for distributor bolts.
Can you send me that trash can?
is that wrench not bendable
No he can't. He is using it to toss his tools.
He got the tools back out. This is a hater bait video.
New name for video "10 perfectly fine specialty tools for trades that I have no use for because I just need general tools for home use."
Facts
Yup
I did cry a little when he through out the channel locks
Ha ha, when he pulled out the bow saw I was all hell no he isn’t!! I never had an issue using them to cut down our Christmas tree every year!
@@landscapingspecialist I agree. Most of the problems he has ARE user error. Craigslist?
As an industrial and commercial electrician, I’ll never own a tape measure without a magnet, matter of fact, I always choose the tape measure with the strongest magnet. Drop a screw or a wrench off your ladder, just push the tape down and use the magnet to retrieve your item, really helps save your hips from unneeded trips up and down the ladder.
I agree, have a Klein tools magnetic tape measure and I use it to do this religiously
The fat max with a magnet is the best. It's great for pipe
As a machinist/fabricator I hate magnets on most things including tape measures, they collect metal chips and are a PITA to clear every time they are used.
Exactly he's not in the trade he has no idea what he's talking about
@@nickjunt3817 Well from some other comments and what he himself is saying his primary work is with wood, so consider his personal opinions in light of that. I don't always agree with him, even on this vid, but I would not say "he has no idea what he's talking about".
The tape measure one baffled me, you bought a magnetic tape and complain things stick to it? And you don't even clip it to your belt you put it in your nail pouch
@@TheOnefalcon07 I have the magnetic and the auto lock 16ft tape measures, i really like mine, for $10 and the fact that home depot will replace them anytime they break, you can't go wrong them. I will agree with him thouhh when he says the fat max is the best way to go.
@@TheOnefalcon07 to each their own, maybe im biased because the fat max was my first tape but I'm also a milwaukee fuel fan boy and use the 16ft auto lock tape now that everyone else hates for some reason, their tape measures have come along way
@@TheOnefalcon07 I personally don't think the milwuakee tapes are that great.
They get some things right and others wrong.
I dislike the rounded shape of them, they see square and round designs now, but the round one just rubs me the wrong way.
I dislike the markings near the foot marks. They make too big of a deal about being right at a foot mark so they reduce the height of the ticks to all match, so I have to very carefully make sure I'm reading it right, rather than just taking a glance and knowing exactly which 16th I'm falling out on.
They're also very large for their size. Their 25' tape is as big as a 35' tape. I'm not a framer. I'm typically doing more pidly things in smaller spaces. Very rarely do I need a tape over 16'. And even their 16' tape is just far too big for me. I like those cheap green ones that homedepot used to sell. Lowes now has them as craftsman.
My only gripe with them is they have 32nd marks for the first foot.
@@TheOnefalcon07 I prefer Fatmax but I use but I use both, the whole video I was thinking operator error.
@@billybobjoe198 i do hvac commercial work so the bigger and fatter the tape the better for me. If I was a framer or carpenter it'd be different, that being said I dont use anything over 16' anymore
This is super stupid, especially the first tool, flat wrenches have many uses where an offset wrench wouldnt work
Dang it he don't have to use flat wrenches if he don't want to.
@@strayfiftynine9151 if you need a flat wrench just use your torch to convert an offset 😀
@@paulnicholson1906 Or I could just make one with the mill, heat it in the forge and temper it in oil. Just need to decide what color I want. Do I paint before or after I stamp the size? Sorry I've been auguring with Democrats way to long. Got to quit doing that. Have a good day. Good idea.
That is a ratchet wrench and you undo using one side and do up using the other. It can't have an offset.
@@spudpud-T67 Why couldn't it have an offset? I've got reverseable ratcheting wrenches with offsets, I've got flex head ratcheting wrenches, and I have flat ratcheting wrenches.
When I throw a magnet in my nails, they get stuck to it.
Yeah
Why would you put a tape measure with a magnet in with your nails to begin with?
lol *shock face*
😂😂😂 maybe he should keep the tape and toss the nails.
Right that the only tape I like the Milwaukee stud
Why is your tape in a pouch and not on your belt or hanging from a pocket?
I keep learning the hard way, never throw away any tool unless you have an EXACT replacement for it because you never know when you can need it for some random hobby or project you didn't think you'd get into. i once threw away this cheap Black and Decker corded drill driver cause i started investing in high quality tools. now im wishing i hadn't done that cause i could have used it as a cheap car buffer. And at the very least, you can use those cheap tools to give to your neighbor when they will inevitably come over to barrow a tool.
Yes, I certainly would not just throw stuff like this in the trash (assuming it was not just for drama)-- that's bad for the environment (Mr. Forester). Some of these could be made into other tools or given away/donated to someone that might find them useful. I would at least have removed the cord from the Jitterbug sander for a future part replacement for something else. OK, that tape measure was trash.
Must be nice to have that kind of money to throw away tools that still work, even as a backup.
The tools I throw away. The Allen keys that come with things. The bit driver sets that are only odd sided flat blades and rounded out bits. The bottle openers that come with tool kits as if everything in a shop isnt also a bottle opener. Hell my workbench opens bottles. And then any wrench that rounds things off I've even had this in a set of mac line wrenches the small ones were fine the big ones opened up when used.
Made this mistake giving a 1h nicd charger to goodwill. Realized i have some batteries that aren't registering with the nice looking "smart" chargers anymore.
@@bryceg5709 I have so many of those dang Allen keys because I keep thinking I'll eventually think of SOMETHING to do with them because throwing them away seems a waste.
Next week Cody works on tractor...needs to reach a hidden bolt and the offset on his wrench is preventing him from reaching it...buys a new set.
...let’s hope he keeps that trash for a few days
I hope it happens well deserved throwing away good tools but we'll never hear about it
That's what the other end is for
Yep! Literally me last weekend
@@candypaint6919 he pulled every tool out of the trash can as soon as the video was finished
When you want to upgrade your tools; pass your old tools to someone else...for free. They may not be great tools, but they're better than no tool at all and it helps get someone else started. Spray foam is the devil though.
Don't send bow saw on. Blades bend and can snap-dangerous!
@@carlzirk every tool is dangerous. i use bow saws all the time; have yet to have one snap. if you're seeing that happen, you've got the blade way too tight.
@@StevenAndrews I was a reckless kid with a loose blade. Yes, all tools are dangerous.
My uncle gave me a tool box full of cheap hand tools that for him weren't any good but to me at 14 years old they were limitless
I can't say I have ever thrown away a tool that still works ish! One man's trash is another man's treasure!
Wow. Sounds like most of his problems are self inflicted.
Yah
Yep. Massive waste of tools. Crows feet arent used often but when you need to use one it's an absolute lifesaver
He acknowledges that multiple times though. Admits it's mostly operator error or for his particular applications it doesn't work. He's not saying they're horrible for everybody and that nobody should ever be allowed to own them 😂
Makes for comical entertainment.
Yeah he literally said that he might just be using them wrong. I guess some losers always need to find something to complain about.
Some simple advice to avoid these pitfalls in the future:
1. Good tools aren’t cheap, and they don’t come in 2-for-1 packs. (Tape measure and caulk gun)
2. “Good” is subjective. However, as a baseline, good tools have a purpose. If you you don’t have a use for it, it isn’t a good tool. (Jitterbug and crows foot)
3. Never use a weapon as a tool.
4. Never throw away a tool that may be useful (and safe) for someone else. If you don’t sell it or donate it, take 30-45 minutes to post up with a table in the back of a hardware store parking lot with a sign that says “free tools”. They’ll be out of your hair quick…at least in TX.
I disagree with the discount tools. You see a lot of good small brands do that. i got about a few sets of magnetic screw drivers a few years back, standard, phillips, torques, square drive ext for buy 2 get 1. They've all been amazing for my applications. Now if I was a full time auto mechanic would I buy 2 for 1 tool kits or just buy a nice set of tools...yea probably would go higher end if it was a work tool.
tools giveaways are great
weapons are a type of tool but I agree with everything else.
Should have been named "10 AMAZING Tools I do not know how to properly use"
No doubt. Stands in front of a mirror cranking one out to himself.
Amen!
Thought it was just me
Dam right
Exactly I don't have a rachet straight wrench with a bend they are all flat. Oh spray foam, cmon its supposed to expand. Also we have hundreds of pairs of channelox, we never have problems, like you said operator error all together.
Stopped watching the second you threw that gearwrench away. As a mechanic, those made me sooo much money, more than that "awesome" snap on off set wrench did.
we need to rummage thus guys garbage lol
I agree. Most engines have no room for anything that the offset does not work.
used mine today getting a rear end link off my bmw.. priceless
Same.. still watching but I would've gladly taken those off his hands. They're a dream for automotive.
Crowsfoots are essentially for working on Subaru's. Have you seen those engine bays...
"A poor craftsman always blames their tools"
Never heard a 1/4 sheet sander called a jitterbug sander. Good luck getting into corners with a RO sander....
Because always has good tools.
In my experience, many many times I have tried to do things and came to the conclusion that they're hard. Then I have the opportunity to use a professional tool and WOW. The tool makes all the work. It's just easy without having any experience. From drilling to painting and cutting or applying glue or whatever.
I've also never heard a circular saw shoe called a "table".
Blaming a hand saw for going astray.. man..
@@mynamesjudge well its a foot, not a shoe, the shoe would be protective cover that goes over a foot ;)
@@rubenayla That's called having a metal block. The average person picked up the average tool and got the job done fine, for 100's of years. Only today do we have whiny snowflakes that need a special tool to do an ordinary thing or else everything goes wrong,, lol.
With all due respect, some of these tools and products have their place. Sometimes offset wrenched just don't fit in some spots. The foam we use to fill in the holes in robinson decking when putting in sleeves and yeah the crows foot is essential for torquing anchors when setting transformers
spray foam is also used in electrical to seal a wall around some cables
I also use spray foam to seal around plumbing vent pipe.
I use my crows feet sockets for overheads and also use them for a few hydrulic lines on valve body's so I don't have to take off 3 other lines
Back in the 80s my boss lost his temper and he was in the back of the van throwing stuff around and a block landed on a can of foam and exploded .we stood there watching him expand 🤣🤣🤣
B roll, cody picking the tools out the garbage.
Except for that Home Depot caulk gun. That truly is hateful and ended up right where it belongs.
Steve Taranto amen brother Steve!
Steve Taranto the tape measures too. I pick up the same two pack and it made my fingers look like a hotdog that stayed in the microwave for to long. After the 37th time of it cutting my finger in slammed in on the cement to make sure it would break.
@@Staranto11 I 36th that.
@@Staranto11 Yes sir, buy the gray one, its dripless for about a buck more.
As someone who turns wrenches on equipment on the daily, 0 offset wrenches and crowsfeet are a MUST have in my toolbox.
4:45 haha
Totally agree..... at least about the zero offset wrenches. Crows foot or flared versions also have their place. I don't use them daily but when you need them, they're the only tool to use!
My question is if he cant find a use for them why did he but them to begin with
@@connorstuart5023 Because he was or still is a tool nut. He collects tools he thinks he may need. I was like that and now that I'm retired I have a bunch of tools I don't need. Although I rarely ever bought tools I didn't need.
i thought of ericthecarguy(mechanic with yt channel) who had to change a brakeline and the only tool to do it was the crowfoot wrench.
That "tomahawk" hammer is actually a roofing tool. It was designed for splitting shake shingles to the needed width then flip the tool to nail the shingle in place. Shake shingle roofs are, for the most part, a thing of the past due to the fire hazard.
Bow saws were never meant as a precision cutter they are for cutting tree branches off the tree or to length for fire wood (this is pre chain saws).
Actually it's was for sheetrock
@@tomfinks9598 Actually a bow saw is for tree branches as previously stated. A sheet rock knife/saw is exactly that, a drywall saw.
@@michaelthompson7554 he’s talking about the hammer not the saw
@@louiswhisonant2968 a bow hammer? A hammer bow? A hammer saw? A saw hammer? A saw bow hammer bow?
Bow saws are basically useless compared to a good folding saw like a Silky
I’ve worked on many different farms and ranches but the best one was when the boss built a new shop and I helped clean out the old one. He was just like this going thru everything and throwing out the “junk” tools and I backed up my pickup to the door and filled it up for my shop hahaha it was better than Christmas hahaha
Don't you just love it when Dorks do this~!!! This guy knows a lot less than he thinks he knows~~!!!!
I got some Starret and Brown and Sharpe micrometers that way. The guy had no use for them.
Ones man trash is someone else's treasure.
Ratcheting wrenches dont have an offset because they are designed to be used to tighten or loosen. I would love a set and you just threw them out jeez
Great for torque converter nuts.
Or..... instead of being cheap you could get the offset ones with reverse levers.
@@drksoldier1 or, any skilled worker knows that offsets do not work everywhere. Pretty much every tool was made for a reason, offsets or not...
@@SirCanuckelhead of course they work everywhere. They do still have a non offset side with an open end. Some even have a "ratcheting" open end. I've been working on cars and now boats and yachts professionally for almost 20 years and have never once needed a non offset box end wrench. 🤷🏼♂️ Do yourself a favor and throw out any ratcheting wrenches you have without a reverse lever though. When you back it off into something and can't reverse it you will be cutting it off. It's happened to my coworkers more than once.
@@drksoldier1well your experience does not cover all the needs of wrenches. There are 100% spots that only a flat would work. Silly to think otherwise really.
There’s a goober on the end of it, alright...
lmao
🤣
My boss calls me goober lol
Dead😂
Doncha kno goobers are magnetic
On the spray foam, I've kinda stumbled on something that may work. In my case I removed the trim around my window, and used the foam to you know to make sure the outside wasn't coming inside. But after I sprayed the foam I used blue painting tape and taped over the opening and made sure the tape was pressed firmly on the wall and on the window. When the foam was dry, oddly enough the tape pulled right off and thats where the foam stopped. Worked pretty good.
🤔🤔🤔 imma definitely have to try this one.. thanks for the heads up
Just use old clothes that you don't care what happens to them.
Sounds like too much hassle. When I've foamed around a window, I used a proper foam gun, then left it to expand out and just cut the excess of when it's dry. Took me however long it takes to run a knife along the edge of the frame.
Yeah you got lucky or had cheap foam... Some of that foam will push trim boards loose when it expands.. I don't see painter's tape stopping it.. and I know about painter's tape because I'm a painter... You don't need much foam to fill most cracks and a sharp knife or 5in1 scraper will cut excess off...and I'd much rather scrape off excess than use fiberglass insulation
Best way to limit expansion is to push it in as it's just set a little ( ie like popping it)
The Paris Hilton of homesteading
Mad underrated comment 😂😂
Damn!!! Lol dude is kinda butter soft, bet he knows good lotions for skin care
💀
He should ask his boyfriend before throwing away his tools like that
Ooooooof
I was half expecting him to pull out a flat-ended dive knife and say it's bad at poking holes in inflatable boats
basically this entire list reeks of a carpenter both being kind of ignorant as well as really stuck up. I have no idea who would carry their tape measure in a nail bag, either.
@@Adam-hp5hj yeah I just left a comment about the tape measure cause being a welder I prefer the milwaukee with the magnetic. Saves me from having to stop someone else from working to hold the end of the tape
He is complaining about the smallest flaws in tools, cause he can afford tons of them. Instead of throwing those tools away, give them to someone who is starting out, who cannot afford it. Instead, he sees the tiniest flaws, that other people will not mind at all.
He knows a good amount to make himself think hes an expert on every tool ever made. Came here just to see what bs he's spilling out his mouth this time.
yes children in africa could have eaten those tools.
@@churblefurbles ofcourse😅
He doesn't want others to waste time and hurt their knuckles ether.
User error in almost every case here. He would look like a complete fool on a real work detail.
Solutions:
1 Heat up and bend the wrench.
2 Use a punch and break the magnet, wear gloves.
3 Cover all your cloths preemptively with spray foam, (shooting it more fun than tossing it).
4 Weld crows foot to ashtray for cigars.
5 Jitterbug sander, you can revive burnt toast.
6 Caulk gun, yeah that’s junk.
7 Skill saw, dig the spray foam back out and encase the saw in foam so no one else has to use it.
8 Channel locks good for hot grates or handleless pans on the grill or campfire.
9 Bow saw.. hold on for a sec.
10 Tamakawk, use the bow saw and cut the handle off of it. Throw both tools away.
🤣🤣
@@SICresinwrks you solution ruins the structural integrity of the wrench. It WILL break if you heat it up and don’t know what you’re doing.
1. buy a stanley
@@Imthedussin yup also will be useless on one side
crowsfoot are amazing for o2 sensors and such
Wish I was wealthy enough to throw away tools. If I have a tool I don't like I pass them on to someone else. Garbage seems like a waiste.
Agreed. I have bent up made in China pliers that I don't throw away, despite having long since moved onto Klein Tools and Dewalt.
"apart from splitting skulls, I have never found them useful"
*The FBI has entered the chat...*
haha I thought so how do you know so well how useful they are splitting skulls Cody? On second thought I will just stay away from him to be safe. lol
FBI? ...free views! lol.
Hi FBI, they're also likely good for kindling and finer woodwork that requires finesse, rather than brute strength.
Referring to his native American heritage, of course...
@@nottodaybuddy370 nah, he thought so too. the uneven cutting head make splitting and kindling difficult.
made myself watch until "worm drive saw has too much torque." uh, isn't the torque why you bought it?
He's whining about the starting torque. I've used that exact model and it works just fine. No better or worse than my old skil. He's pretending to be a big tough manly man but he's more of a snowflake than the people he whines about. 😂
@@drengr2759 guessing by the rust on the blade that it's blunt af too!
He must be one of those people that like to have the saw blade touching the line before they start it. Having too much torque would move the blade position and be annoying for someone like that. I always start my blade then move it into position as that's how I was taught.
@@drengr2759 He probably bought it because it has the blade on the correct side.
For general use I never understood why they moved the blade to the right side of the saw for regular saws.
It puts the load on the outside putting way more strain on your wrist while pushing, and it puts the cut out of sight.
Sure sometimes you need it on that side, but sometimes you need it on the left side. I think it must be women were cutting their fingers off when the blade was on the left side.
@@flyingsodwai1382 thats good advice. Thanks. Im a beginner with carpentry.
The push button knipex chanel-locks are probably the best pair of pliers I've ever had. 👍
I’m a carpenter of 26+ years and I LOVE MY MILWAUKEE TAPE MEASURE, I’ve owned all the others and Stanley Fatmax is 2nd to my Milwaukee!!
HINT: KEEP THE NAILS OUT OF YOUR TAPE POUCH !! Nails have their own pouch on your belt !!
I do hobby metalwork and after realizing how stupidly strong the steel is in Klein Tools (especially their needle nose pliers), I got one of their tape measures. There's a vid on here of a guy comparing all the tape measures. Klein did really well in the tests.
30+ years Journeyman and Milwaukee tapes suck.
For me, I still prefer a Craftsman measure. It has a 2-sided end-catch and is easy to read for my bad eyes. I don't need standard and metric. Just give me big print American measurements. 🤣
I like my Milwaukee tape measure too! Haven't had any issues
Lufkin makes good cheap tape measure.. im a plumber.. i fvckn luv Milwaukee almost everything.. except the durability of there tapes..
Snap-on makes 0* offset wrenches as well. Using 0* wrenches in the wrong situation seems to be your problem there, Big Chief.
I totally agree
He's got a LOTTA problems.
Agreed.
Now I remember why I hadn’t watched this channel in ages.
What, the guy who leans over a running chain saw, or pours diesel fuel by the gallon onto the ground above his well, or the guy who complains about a shop owner who kicked him out because he was blindly knocking over every display with his daughter mounted like a backback, or the guy who talks about how godly it is to cherish the land and leave it for your children while shouting over the noise of a caravan of logging trucks hauling off timber he's harvesting in an unsustainable manner off his property etc.? LMAO yeah this guy IS a worhtless tool.
Too many cartoons to watch instead?
I think the last Wankerstar video I watched was the one where he was making a big show of keeping a pistol on his hip while working with hay or something. It was just so absurd to have that thing hanging off the hip while trying to work.
Had a pistol on my hip all day today, even mowed the lawn with.
@@heyg7819 ok
The Makita saw is the best saw in existence in my opinion. Worm worm drive or the normal one. Awesome torque. Just gotta have some muscle to use them.
the type of guy who would complain about battery powered tools....: "everytime i try to use it i have to charge it"
He is the type of guy that would complain that he has to refuel the chainsaw to it to work and that's why it's a terible tool.
@@cristiuup2101 🤣🤣🤣😂🤣🤣🤣
This video is for apprentices to feel better. “I DONT LIKE THIS BECAUSE I CANT USE IT RIGHT.”
Sage wisdom! Lol! You can’t use tools properly, learn to code!😂😂
Best quote ever from one of my apprentices. "Is there really no video I can learn this from, or is this another one of you skill things I just need to get good with." Sorry kid, you just got to get good, he was hanging lights in a parkade. I wanted them up fast and deadly straight, he was not having fun.
Some people that dont know how to operate tools correctly shouldn't critique them
He Has an opinion and u have one ❄️
@@peytonmccosco5712 his opinion is objectively wrong, and he posted it online you can't not expect backlash ❄️
The hate for bow saws is hilarious. They're log saws. Anybody trying to do joinery with one may aswell be using a hammer and wedges for accuracy and ease
Crow's foot spanners are a specific use tool bit like a basin wrench. Most people won't use them all the time, but the job it does it excels at
Tomahawk I can totally understand
Bow saws are meant to cut on the upll too aren't they? Not the push?
@@fedimusmaximus2454 yeah half the cut is on the push and half the pull. The one Wranglerstar showed is probably the best one on the market, made by Agawa
The wrenches without offset are absolutely essential for instance changing blades on certain power planers. You have to fit the french into a narrow gab, which would be impossible if it did have an offset. Same with reaching to any narrow space to take a hold of a bolt to be able to unscrew the nut from the other side etc. Both have their places and it is best to own both.
And if you've got a hot wrench you can contort them to any shape. Every now and then I hace to ruin/alter a standard wrench for a particular troublesome nut or bolt. Ditto for the crow feet, not used often but when you need them, priceless.
Yeah he just says stuff. sometimes he's right, sometimes he's wrong. Welcome to TH-cam.
I use them all the time on my farm equipment. Flat ratchet wrenches are essential.
@@ZingaraJoe That's been my position on the true usefulness of "Horror Fright" wrenches - much less painful than torch modifying a proto or SK.
@@StefanBacon You hit the, "nail" on its head.
that wrench doesn't have an offset because the racketing is not reversible ...
Exactly!!. You can get the swivel heads but when you finally loosened your rusty bolt you bust your knuckles.
I'm not sure this guy knows how to use a ratchet wrench
@Corey Loch then he should stick to hammers, squares and tape measures 🤣
The ratchet reverses by flipping it over and putting it on the nut or bolt from that side.
@@christopherconradson4284 Is the racket that reverses ???
One man's trash is another man's treasure.
Don't just trash them, hand them to the next person in need so they can build their own frustrations.
Seriously though, for someone who does not have anything these will come in handy.
its just theatrical I'm sure
@@churblefurbles Yea It must be. I've been to his Trash dump 3 times. Haven't found a tool Yet.
As much as I agree 100% with everything in this video, it was extremely painful to see you throw away that spyderco tomahawk. Those are not cheap and definitely hard to find, and I know so many people who would've paid quite a pretty penny for it
I'm sure that the 'hawk did not land in the garbage can, he's just being dramatic.
$480 on Spydeco's website
"A little knowledge is a dangerous thing" - My Grandma
This guy is a dangerous thing because he has little knowledge.
I enjoyed this, best "spoof" video on tools
I grew up working on my own cars, and discovered early on that every tool has it's uses. As a master carpenter, with 50 years of experience I have also learned that 99% of the complaints of the problem with a tool are operator error. A true craftsman will learn to use the tool in his hands, before blaming it for his short comings.
True, but if you have a cheap tool lot of times it’s frustrating to use it
Idk man i feel like not using sprayfoam because its icky is definitely not operator error
Yes, and recognize when you need another tool. Most people who use tools add to their kit when necessary, and don’t just throw out a good tool (like a Channellock) because it didn’t fit a particular situation.
@@GH-oi2jf I agree, which is why I have a huge shop stuffed full of tools 🤨
I can use the wrong tool better than most. I have learned from pros how to use every tool I own. I live in a tiny home and I can't store tools that don't work good enough. I am a residential wood stud framer and owning the right tool is paramount.
Cody I would pay shipping for your crowsfeet set. I'm a beginner diesel technician and have needed them countless times. Please message me if you see this.
Cody did not throw one tool away, when the video was finished he retrieved every tool from the trash.
buzzincalifornia i wouldnt doubt it. Probs got sponsored to hype up certain tools
I work on industrial valves. We always use these on our torque wrenches when installing valves in pipelines. You just can't get a socket on the studs because the valve bodies flare out and there isn't enough room.
He's a sell out. Good luck haha but go to his amazon store! What a joke.
My tip go watch essential craftsman. You'll thank me later.
Go to Napa
What you call a “tomahawk “ is actually called a framing axe and very useful for roof framing. Properly sharpened they can cut as clean as a saw. Great for adjusting bird’s mouth, notching etc without having put your hammer down. Mine all have nail pullers …
Pretty cool, never knew that, thanks!
I framed with one years ago. I felt pretty awesome. Recently i bought another and used it for 3 months before I went and bought a normal California 21 ounce framer. I use the framing axe to cut kindling and take it camping
If you kept the Milwaukee tape measure, you'd have a nail for the membrane of caulk. :)
Lol, I thought the exact same thing.
First thing I thought of when he said that.
This guy is funny! I've always been told "The right tool for the job." This guy is the wrong tool! but he did do a great job of showing his lack of knowledge.
I was thinking the same! I'm not a professional, but I know the proper use for the tools he couldn't understand.
I nearly had a stroke when he said the jitterbug sander is useless. As a painter (interior and exterior house painting) I have used these sanders to strip 50 years worth of paint back in seconds. I'm talking several layers of oil, lead and acrylic paint. An 80grit will make short work of anything, yes jitters aren't as great for stock wood removal (which isn't what they're designed for anyways) but for sanding paint which the jitterbug is primary used for (or for fine finish on wood) they're great tools.
The jitterbug sander is cheaper to supply sandpaper for. Orbitals need special and rather expensive pads. A pack of pads for an orbital sander will set you back 50 bucks. you can get 4 different grit rolls of sandpaper for 50 bucks.
Also the square or rectangle shape lets you get in places an orbital struggles to get, specifically corners. When you sand a house with an orbital sander it will miss a few square inches on every board where the weatherboard meets the scribe of windows or the corner boxing of the wall. You either have to hand sand the (literal) hundreds of missed spots because the orbital is round or you use a jitterbug and save yourself hours of work.
In general yes I think the jitterbug isn't as good as an orbital (in general) but you can get a similar amount of work done and a similar quality with either tool. To imply they're bad is mind bogglying.
Knowing how and when to use a tool is pretty important, if you don't know how or when to use a tool then yeah you'll think it's a bad tool. Take it from a guy who has years of experience using all types of sanders for all applications, the jitterbug absolutely has it's uses, anything who thinks otherwise is wrong.
That was one of the few I actually agreed with him on 😂 but I see your point. Every tool has a purpose to someone out there.
I didn’t read this text wall completely, but I think I know what you mean after reading the first part
I noticed something with this guy if he don't use it nobody should
It does make a silky soft finish....
@@theoutdoorduck701
We're talking about a guy that has trouble using a caulking gun.
I have the Makita worm drive saw, and yes the torque is a problem. Just make sure you are not too close to the wood when you pull the trigger. It is a beast of a saw, though. I've cut a lot of concrete with mine. The torque is part of the reason it can do the hard work. Like most Makita tools, it is good.
This guy really doesn't know what he's talking about. He shouldn't be allowed to use tools much less judge them.
He plainly does not know what he is talking about. Period.
He always mistakes his rather limited experience for expertise and his opinions for facts.
He's a paid affiliate of Knipex. Explains calling channellock trash
"Jitterbug sander" Is good for finishing alumium to get anodized. No Swirls
My experience has been the reverse with wood. I always get swirls with the jitterbug which have been totally eliminated by the orbital. I get that it could be an issue with aluminum though.
I've hand sanded a shovel before. Literally took two days and many sanding papers. No way that handsanding would be quicker than using this power tool.
Fringe Wizard I used to use it for table tops. For me, it wasn’t that it was slow, it just would leave swirls all over the piece that would show up when I stained it. Switching to an orbital fixed that.
@@FringeWizard2 I doubt this or any other power sander could do a shovel with all the contours it has. Sandblasting prolly the way to go. MAYBE a corner cat but you'd end up wasting tons of pads since you could only use the tip on most of the shovel. I'm obviously bored. I know this isn't important enough to be commenting on :)
It's better for sanding endgrain on boards. At least in my experience.
Dang, half of those tools are in my work van right now. Guess it’s because I’m a real tradesman and know how to use them. Really hope you didn’t actually throw that worm drive saw away!
I dont even throw away the free tools that come with something, like allen wrenches and flat head screw drivers, I know they are junk but in a pinch, they work.
I worked with a saw like that and it was a beast, grab it with both hands and go, no binding ... I'd love to own one... And he throws it away :S
@@chuckmiller5763 This.
I learned it from my grandmother of all people. She used to do a lot of DIY stuff when she was younger and she kept everything, used screws, old screwdrivers, absolutely everything.
Now that I'm helping her out in her new house if I don't have my toolkit with me I just go into her hoarded over decades collection and grab what I need.
For example a knob had come off a wardrobe door (they had some weird fitting that was press fit rather than screwed in) I go into her gack box of screws and find one the exact perfect length for getting it properly (re-)attached so she isn't pulling at this stubby spiked thing with arthritic fingers.
So many times have I been saved working up at her place because she never threw anything out.
Even when I upgrade my tools I keep the olds ones as back ups or to give to apprentices. Why you would throw away any tool is beyond me.
Just because a tool is upgraded in some form does not make it a bad tool, looked like those channel locks have had years of use...last week I needed a 3,4 (with no offset) wrench to release tension on a serpentine belt, offset would not work. Have $39 H Freight reciprocating saw for cutting oil tanks in half and tree roots, use my Bosch reciprocating saw for cleaner work. The Makita framing saw is a beast..I would of taken it! Lastly that caulking gun is $2, sounds like you have a beef with Home Depot not the tool. The tools you tossed have a useful place.
For the record, I use jitterbug sanders for fine finishes. I’ll sand polyurethane in between coats with those because orbital sander can sometimes be too aggressive when you don’t want to sand through a finish, and the jitterbugs work perfect because they sand much lighter.
Anything made from Bosch is garbage you say? That's a massively derogative statement that I totally disagree with and I'm sure many others will too!
makitas,dewalts and kubotas and stihls are my only 4 best reliable powerful tools
Their bulldog drill is the best.
I agree with you, I don't think he knows Bosch products that well
@@RJX88 They're not that popular in the States so I forgive his ignorance...
In his defense, he said anything made by bosch wasn't worth anything "anymore". Implying recent tools, by my interpretation anyway.
His opinion isn't a rarity from what I've seen online lately. I loved bosch, my 1613evs plunge router just passed on to router heaven after close to 20 years of use. I bought it when I was a kid without a lot of money and it certainly didn't owe me a thing when it died... I'd have happily replaced it with a new bosch until I started reading different reviews online, now I'll probably just take my chances and buy another used 1613 when I find one in good shape instead.
This entire video can be summed up by the term "user error".
So hits his knuckles using a wrench cuts his fingers with a measuring tape and the makita has too much torque for your grip.I think the problem is you have weak sensitive hands
i never cut my hands with it like how does that even hapoen 💀
A non-offset wrench makes a lot of sense in certain space situations, especially one with a ratcheting box end like the one shown in the video appears to. Sure, in most cases you can get the job done with either the straight open-end or the offset box-end, but sometimes you get the right combination of constraints and it's all that can do the job. Sometimes only a straight wrench will fit, but the open-end isn't giving quite enough grip. Or the space you have to turn the wrench might be really tight, too, and you just need the extra wiggle room a 12-point gives. Better to have one and let it gather dust than to not and wind-up needing it, I think.
A 5/16" flat ratcheting Gearwrench saved me gobs of labor because I used it to remove and install 8mm water pump bolts on a Ford engine where the repair manual said I had to remove the motor mount and raise the engine to get enough clearance to get access to the bolts in order to replace the water pump. Nope. Just needed a very slim, straight ratcheting Gearwrench.
Hey man just throwing this out there I’m 24 and was fortunate enough to walk into my own homestead we got for a good deal.. 120 year old house and bars but not in to bad of shape.. from someone who would really appreciate and has really app related assistance from others and especially more experienced guys.. I hope you aren’t throwing those tools away... I’ve bought and been given many old and used tools that aren’t perfect but tools are pricy now and some of us haven’t had generations of tools passed down... in short find a young guy who needs them and give him a hand. We need it and appreciate it!
Very well said. Throwing them out is both wasteful and inconsiderate
I’m remodeling a house as well I’ll be happy to take the tools this goober doesn’t know how to use lol.
EXACTLY
@William Tell I came to that same conclusion when I watched his recent rant video.
He used to have interesting videos but now it seems like he just showing off his tools.
I think if he built a breadboard he would still get his tractor out to drag a tree out of the woods to make it.
ah ... the caulking guns ... when I was a kid growing up I would take them from my dad's toolbox and they became my "sub-machine gun", the imagination of kids growing up ...
The good ole days running around playing war games with a caulk gun lol I still do that ocasionaly
I did this
An air chisel is an awesome machine gun too even makes the sound for u
Ah yes
.. the good days
Ditto
"I've never been able to cut well with it" one of my favorites
Moral of the video is Wrangler doesn't really seem to understand what many tools are used for...
“Decent tools that I’m too lazy to use”
I’m with you on some of it, but Milwaukee makes like 20 tapes, I bet Stanley has one with a magnet too
They do, can confirm
Almost all of his videos are highly informative, helpful, and even entertaining. This isn’t one them. I got about 1/4 of the way through and said, “I will suffer this no more!”
I bailed out when he showed The Makita Worm Drive saw and didn't like the torque power~!! Also that curled over plate is so you can slide it around on wood without it catching or marring the material or causing you to catch it on something and losing your grip on the saw. Also 50 yrs. ago the "Skilsaw" was the bomb but no more. And I won't even mention my Channel Locks~! As they say= "One Man's trash is another Man's Treasure" 😆
Yeah it was horrible
Yeah.. he's not very knowledgeable about woodworking tools.. that Makita Worm Drive saw is highly useful and sought after... They cost about $300 or did when I last priced one.. and they are much better to use because the blade is on the left side so you can see what you are cutting
Your thoughts on the bowsaw are interesting. My great-grandfather mostly used them for making furniture, not cutting through larger pieces. I think they're mostly meant for finer cuts made in a comfortable posture, in your workshop. Mind you, he had to build his own tools, so perhaps the bowsaw was more convenient to make and replace. I definitely don't think he would have used them for over half his life if they didn't cut straight occasionally, the furniture around the farm is all made by him and nothing wobbles ;)
Totally agree on the tomahawk, they're not as widely useful as people think. I like my tomahawk head because it's light and the trees around me grow limbs that are good for a DIY handle, but I wouldn't ever carry it around. I keep it in my car so I always have an axehead, but I wouldn't rely on one for anything more than basic, sloppy work, and only in a pinch. Still better than those survival abominations that have serrated edges and can openers on every surface.
I knew where he was going with the bowsaw. It amazes me the tools I purchased in my younger years. Thinking at the time I was making smart purchases. Probably half the tools I bought (either as tools or survival gear) prior to 30 I've discarded. They were all just cheap junk intended more to catch the eye than be a practical tool.
Silky saws rock in my opinion. I have two in my truck. One is a Silky Katanaboy that I've never used. But since it is only in the truck for emergency purposes, odds are I'll never use it in my life time - short of an emergency on the road and the tree is too thick for the regular Silky saw that should be a mainstay in anybody's tool kit.
As for the caulk guns, those things were intended to be throwaways after a single project. They are no thrills units. Their target audience is the guy or gal who literally might be caulking once a year and just doesn't want to mess with an old caulk gun.
The tomahawks are weapons of war. I've used a few for hiking and such over the years. I even have one still in my gun case. But I'm not using it to chop wood. They simply are not practical for that purpose. Its purpose is to chop skulls. You need to make kindling, use a hatchet or a small double bladed axe. Personally, the hatchet works great for small jobs, but as soon as you want to cut something as thick as your arm, you are going to want the axe.
What saw you describe is what is called a resaw. Bowsaws are tree saws
"It is a hateful and terrible thing, and I won't suffer it any longer."
Wow, that must really be one bad tape measure.
Instead of throwing the tools away, you could have just sent them to me. I'll pay for shipping!
“Every time I pull out the tape measure it has screws on the magnet.”
You do realize Milwaukee makes other tapes without magnets... Don’t blame a whole brand on your dumb mistake to choose a magnetic tape which is what the STUD series is... hence why it’s called STUD.....
Then in the same breath he says he cannot find nails. Hmmmmm..lol
- “And then you’ll go looking for a nail, which you are never going to find in that moment.”
This guys knows me. 😅
I never knew that those "janky" caulk guns could cut the tube. Man they are even better than I thought.
The cheaper ones dont. That hole just kinds chews off the end after about a dozen bites. Havnet bought one in years since I have an electric one now. but as I recall the ones of that style always had several options. the 2.99 one the 6.99 one and the 12 dollar one. the 12 dollar one prolly works just as well as his plastic yellow handle one.
@@flyingsodwai1382 why probably gonna use a caulking gun like maybe once a year unless you remodel houses or even then they are ok and get the job done.
who uses the cheesy cutter on the gun to cut the tube and who punches it with the built on probe that then puts a glob of caulk onto the barrel where you are going to get it on your hand?
@@flyingsodwai1382
Idk, my 5 dollar ones have it. Cheapest ones I could find.
@@pixelbob7983
Anything you want waterproofed can be. If you own a house, you have to have them. I recently installed some lights on the side of my house and, yep, I caulked them. IP44 wasn't good enough for me, so I made it IP67 with the caulking gun.
Here you are, preaching about the big sin of being wasteful one day and trashing decent tools the next.
My thought exactly. How many beginning DIYers would love to have these? I hope he donated them to a thrift store, a maker space, a tool exchange...
Especially seeing as that tomahawk is close to $200 purchase
lol do you actually think he threw away all those tools?
@@QW-lm1ie well if he didnt hes even more pretentious and inciting drama than he seems to be
The fact that I can't find a positive comment gives me faith in the internet. This whole video is ridiculous guy is clueless
Agreed.
Just an opinionated video.
What a Man-Karen , Cody’s turned in too…
I work in steel and I love the Milwaukee magnetic tape. The belt clip is really nice because it never bends out, the tape has markings on both sides, the body is an even 3 1/2 inches long, the hook is nice and big, the finger rest is way more comfortable. I also really like the flush ratcheting box wrenches because they take up less space and they can get into tighter spots. You should always have more than one type of wrench, anyway. Anyone who says otherwise is a fool
One of the things that drive me nuts about modern advertising. These tape companies acting like they've invented the wheel by including the measurement or having some sort of even measurement on the body. That's pretty standard. My new lufkin nite eye is marked 3.25", my 20 some year old stanley powerlock II was a dead even 3". My grandfather's Carlson Big Chief 12ft tape with metal body was an even 2" and marked and it's from the 40's or 50's. They can stop acting like they invented this 'feature'. lol.
WAS the box wrench ratcheting? I couldn’t bear to watch too closely. I imagine if it was offset, he’d complain about it being impossible to use. Which would at least be a valid complaint.
I’m a commercial electrician and we all use Milwaukees. Wide blade 25 ft. I wanna like fatmaxes but I can’t.
I work outdoors and my Milwaukee rusted out and the petroleum products that are in the industrial setting I work in dissolved the paint
I started with the milwaukee tape they start to tear really easy for me at least. I bought a Stanley Fatmax and it's been one of the best tape measure I've used so far.
This is the type of guy that uses Black & Decker to hang flower boxes and calls himself a construction worker
my grandad get heartatack when he said he dont like bowsaw bcs he cut askew
Knipex are great, but I've never had trouble with channelock.
Video ends... camera man proceeds to pull all the tools out of the trash can. 🤣
He's overwhelmed with fake laughter. Lol.
YES! Thank you.
"My hand tools are too powerful and magnets scare me"
You have a very beautiful pfp
haha nice pfp
Lmao
What to heck you bought a warm drive saw for? That is like buying an 18 wheeler when you need a wheel barrow. People who use those need need the toque to cut heavy timbers and hard wood, Nothing stops them.
Agreed. Was given an old 8 1/4" worm drive Skilsaw about 45 years ago by a production carpenter who worked for me. I used it to frame three houses and a barn for myself and today it sits in its case waiting for the next big job. If I need a circular saw today I grab a lightweight 7 1/4 or a battery 5 1/4 for a quick cut.
I almost laughed out loud when he said it had too much torque
Right? I’m a noob with woodworking and a few minutes Google searching was all I needed to tell me that worm drives were not for my DIY stuff. Also, he complains about the heavier steel shoe: physics tells me that this is a feature, not a bug, when dealing with high torque, because an extra few pounds can increase the inertia by 10-20%.
A bad blade will stop them, lol.
Put an offset in it the wrench. Totally agree with Knipex. I made that switch years ago, never will another channel lock touch my hand.
To paraphrase “The tool has to much power, and I couldn’t handle it.”
Yes set the front down on the board then it will torque into the board then you begin pushing, I learned to use a skill saw 7 days ago and first thing I was told was to set the shoe down on the board so I don’t get my wrist torqued
David, my thoughts exactly. Who complains about a saw having too much power??
@@alanj7306 If anything it's complaining it doesn't have enough power
Exactly. I work at a Home Depot, and the makita battery operated and corded worm drives get EXCELLENT reviews from customers. They’re actually one of makita’s better products if what I hear from the customers is to be believed
@@jaredprovost2002 worked with one at it was fantastic , no binding, you pull the trigger and you cut... Loved using it...
Know what you mean - my adjustable spanner also has no offset. Hang on- none of them do. Does that mean I have to throw them all out?
I forgot that all bolts and nuts were on a flat surface, I am silly sometimes.
Tell me you don't work on your car without telling me you don't work on your car.
A little vise work will solve that "no offset" problem. And please tell me you ended up donating those tools to someone.
Man up Drama Queen! No need to waste perfectly good tools...
Do you realize how much uses these tools
@@henryhayes6290 compared to a typical homeowner, a lot. compared to a tradesperson not that much.
He dug everything back out of the trash but the caulking gun and the pull saw..
I just lost a load of respect for him.
Fame & wealth do that to a guy. Good reason to pray for him & but especially for his family since they got to live with him! Still like him though, inspire of himself.
As did I
Bro he just doesn't like some tools relax
Every tool here has been improperly explained. The “tomahawk” is actually used for installing cedar shakes. The bow saw is generally a camping saw. The box wrench without offset is used in auto repair where you can’t use an offset wrench such as when working along side a firewall. The worm drive saw is actually meant to be a heavy duty saw. The spray foam is easily removed with acetone, etc.. The Channel Locks weren’t properly adjusted. The sander is a “Finish sander”, etc.. I guess my father actually explained all of this to me. How painful to watch all of that stuff go in the trash when a donation to a group such as Habitat for Humanity would have quickly repurposed all of it to raise money for construction projects. Sad….
You’re the first person in the world to call channel locks a bad tool
They definitely have their place, but the knipex cobras are just so much better. I’ve got a 6” and a 9” and they are invaluable tools. They grip so well and are so easy to adjust. The ones that he showed weren’t actually the cobras, they were the alligator pliers. The cobras have a push button that has around 20 positions which makes it easy to get a really good grip on round material. I swear by them.
@@grahamwaldo331 aint even a cobra in the video though. but yeah, myself started with an cheap set of pliers, more or less immediatly bought knipex ones after some use. cheap wrenches work fine, cheap pliers are horrible to work with :D
Ain’t even gonna lie as a auto mechanic watching him throw that gearwrench away hurt!
That's where I lost it.
@@Morgoroth37 those are my go tooo's every day i havent been able to live without them since i bought my first set 25 plus years ago.
@@timryerson6733 same here man. I was in the field when they got popular and I use them all the time!
I dont like ratchet spanners they just dont fit properly and by the time i get one out i have got the job done with a normal combination spanner. Secondly they cost more than they are worth. But having said all that i never throw away tools, you never know when someone wants to borrow a tool, thats when i give them my rubbish tools, i have learnt never lend good tools because they never come back
That is a ratchet wrench and you undo using one side and do up using the other. It can't have an offset.
Cody throws stuff in the bin punctures spray foam can and it shoots all over the workshop and himself , revenge of the spray foam is sweet .
Flat spanners and offset spanners both have many many useful applications. I'm a truck mechanic and I have both in my box for any sort of application that I come up against.
Clamp the flat wrenches in a vice, hit them with a torch, and put the "off-set" in yourself...
Can’t heat the ratchet wrench with a torch without cooking all the lubricant out of the mechanism.
The flat ratchet wrenches have no offset so they can be flipped to loosen/tighten rather than having a selector.
I bought a boxed end wrench without an offset specifically to be used to turn the shaft that raises and lowers the spare tire on my truck because it is easyer to turn with it meeting the shaft at a 90 degree angle instead of the offset angle so they do have their uses. The tire iron was susposed to have a hole in it to be used as a crank acording to the manuel but it was a used truck and apparently it didn't have the original Tire Iron it did still fit the lug nuts so I guess it's okay now that I have the wrench.
@@brianjohnston560 yea and you can get yourself in a pickle backing a bolt out and not having enough clearance to get the wrench off the bolt😱. Ask me how I know
probably bend without a torch I've bent lots when using a cheater bar lol (warranty replaced them)
This guy doesn’t do a lot of work on cars or machinery clearly, or he’d keep all crows feet and spanners
Any one who works on hydraulics will be going through his bin right now!
@@andygilbert1877 my thoughts exactly as I’m a hydraulic technician 😂
@@Bob-bt7ty 😂😂😂👍🏻
Crows feet may be used in some other discipline but this mechanic does not use them. Im an ASE master tech and own my shop and have only used them once in 20 plus years.
Have you seen any of his videos. All of its related to wood & lumber work
Wow! I never throw tools away! I LEARN HOW TO PROPERLY USE THEM!! Then if I find I just don't use them that much, I pass them on to some else who might get use from them. BTW the Knipex are awesome, but I still have regular channel locks
My Dad had some awesome channel locks. Different sizes for different uses. I had my own by the time he passed, but I was happy to inherit his set anyway.
When I got sick I gave all of my tools and full snap on work bench to my neighbor who was a 19 year old kid aspiring to be diesel mechanic. He’s now 23 and owns his own shop. Sure enough that 23 year old I gave all my tools. Takes care of me and my truck every time it needs something and he does not charge me a dime. As my old man used to tell me. If you take care of people they will forever take care of you.
@@andrewmx2586 absolutely right! Too bad the new generation doesn't seem to get that. I tried to teach my son the same ethical way of thinking. He gets it. He's got a son now too. He'll pass it on.
I have a tear in my eye seeing tools being thrown away