If you test anything like that inside again Roger, as well as the distance it might be worth keeping it away from the door, because if that had of got nasty you would have blocked off your escape from the building. Also it might be worth having a Co2 fire extinguisher on hand for next time just to be safe. Always better to be safe then sorry. I hope you manage to get the vaccuum working and I'm already looking forward to your next video :)
It's still possibly the suppressor, or at least one of them. The meta can could be a suppressor but on the small PCB next to the motor is another 2 capacitors which could have also gone bang. Lastly there is a chance that the triac (3 pin tabbed device on the small PCB) that controls the motor speed might also have gone and if so you will be able to clearly see that it has failed, this is replaceable or the speed control circuitry can be bypassed, this is what I do to henry's at work when the high/low or autosave circuity has failed (and a failure of that will cause the machine to be dead, although the motor is fine).
I think the diagnosis will be a little easier now too, Also agree that it sounds more like something on the PCB than the motor (purely based on the motor running before the bang)
The motor isn't defect, that explosion came from the capacitor / supressor. I have the same machines in orange S 224 and at this model I have the same spectaculary explosion. At my S226 I have directly disconnect the supressor. I cut off the cables on the supressor and connect with the terminal strip the cables with same colour together and the machine works fine now, without any supressors.
I have had two motors blow up on me. A Dyson DC07 has severe bad bearings and I continued to use it and eventually it made a burning smell. The other one was an old Numatic that got blew up as I was using it. The bushes were shot! I think i'm used to vacuums bowing up now.
Husky Vacs They were all vacuums I couldn’t care less about. They have been thrown away now. I did continue to use the Dyson with bad bearings. It made rattling noises and the motor was slowing down. Eventually the motor burned out completely. The Numatic just needed new brushes after being heavily used from 2006. I had another one identical so I just swapped the whole head with the old tub.
Hi Roger. The misaligned speed control knob suggests that this lovely Miele has been previously tinkered with thus probably causing your spectacular blow out! “You were only meant to blow the doors off!” I would get a view from the mighty beko1987 before investing a lot of money on this one. He will know exactly what was the likely cause just from watching the video!
That also makes me suspect that something may be making contact that shouldn't. The alignment of that knob being off makes me thing the potentiometer (the actual electrical component it turns) is either loose or has been removed and not re-installed correctly. The latter technically isn't a problem, but it is also possible that the leads weren't dressed correctly on reassembly.
Miele goes tubby bye-byes! Biggest bang poor Roger's had in a while :-) That the motor ran makes me think it's the electronics that failed (speed adjustment PCB) Sam!!!!
Wow, nice machine. Looks like new. I have the same machine in same condition. But be careful with the supressor, it blews up and the machine can be standing on fire!
+its' vacuuming time Ja, das war der Kondensator. Ich habe das mal bei unserem orangenen Miele S 224 genau so erlebt. War auch filmreif, hatte damals aber keine Kamera parat. 😉
Sorry to ask this here but currently can’t find any of your American demos. I know American vacuums need the voltage stepped down, but do you do anything about the frequency as UK is 50hz and USA is 60hz.
Always use a meter to test for a dead short between neutral and live, without power. Also use a LOW value fuse at first say 3 or 5A It's probably a blown capacitor.
Any updates Roger on finding the cause? If there was signs the filter had burnt and the suspect suppressor would have blown and not looking in the condition it does. Maybe the potentiometer burnt out but it seemed like there was a dead short somewhere down the line.
The motor is fine. Your problem is with the pcb board. Circuitry this old coupled with the suppressor its more than likely your cause. You can direct wire the motor to confirm this.
I was trying to fix my Henry motor and wired it to something when I turned it on it was basicly a firework but it worked because the turbine started slowing down
Hi roger. How’s things. Did ever manage to get this fixed. I was wondering if there might have been a problem with the wiring from the cable rewind. Prob not though Xx
Blimey that is scary. I have seen a lot worse. My mother's old Electrolux blow up and had spark flying left, right and centre. Your so lucky Rodger mate..
Bonjour a tous il s agit de shunter le condensateur et l aspirateur fonctionnera parfaitement bien Ce modele est tres performant et tres robuste par contre il est bruyant et lourd Bonne journee Benjamin
Google translate: Hello everyone it is to shunt the capacitor and the vacuum cleaner will work perfectly well This model is very powerful and very robust, but it is noisy and heavy Have a good day
When I first watched this video when I first ever watched yeah I didn’t know it was gonna bang but when I did that I just jumped in a heartbeat in two minutes😂😂😂😂😂😮😮😮😊😊😅😅😮😢🎉🎉🎉
Roger that vacuum blowing up just about gave me a heartache and I don't my poor 34 years old heart is in shock and I still loved your video
We used to have one of those but in green and without the power control dial. It was the best vacuum I've ever had.
If you test anything like that inside again Roger, as well as the distance it might be worth keeping it away from the door, because if that had of got nasty you would have blocked off your escape from the building.
Also it might be worth having a Co2 fire extinguisher on hand for next time just to be safe.
Always better to be safe then sorry. I hope you manage to get the vaccuum working and I'm already looking forward to your next video :)
Oh my god Roger i knew it was coming but wow what a bang, i hope you and daisy are both ok after such a shock. Thanks for sharing
A better explosion than one in a Michael Bay movie.
33:02
It's still possibly the suppressor, or at least one of them. The meta can could be a suppressor but on the small PCB next to the motor is another 2 capacitors which could have also gone bang.
Lastly there is a chance that the triac (3 pin tabbed device on the small PCB) that controls the motor speed might also have gone and if so you will be able to clearly see that it has failed, this is replaceable or the speed control circuitry can be bypassed, this is what I do to henry's at work when the high/low or autosave circuity has failed (and a failure of that will cause the machine to be dead, although the motor is fine).
I think the diagnosis will be a little easier now too, Also agree that it sounds more like something on the PCB than the motor (purely based on the motor running before the bang)
Nice video, with the first time disassembling scene on your channel.
Honestly, I got frightened when I reached the "bang" part 😂
The motor isn't defect, that explosion came from the capacitor / supressor. I have the same machines in orange S 224 and at this model I have the same spectaculary explosion. At my S226 I have directly disconnect the supressor. I cut off the cables on the supressor and connect with the terminal strip the cables with same colour together and the machine works fine now, without any supressors.
I agree, and that man knows what he´s doing guys!
Maybe that red thing that you removed from the basket was from the supressor. Actually motor sound ok and I am quite sure it's ok.
Go to 28:47 for the big bang
I have had two motors blow up on me. A Dyson DC07 has severe bad bearings and I continued to use it and eventually it made a burning smell. The other one was an old Numatic that got blew up as I was using it. The bushes were shot! I think i'm used to vacuums bowing up now.
I was already using them. I had them since new so i'm not going to do a full service after every use.
Husky Vacs They were all vacuums I couldn’t care less about. They have been thrown away now. I did continue to use the Dyson with bad bearings. It made rattling noises and the motor was slowing down. Eventually the motor burned out completely. The Numatic just needed new brushes after being heavily used from 2006. I had another one identical so I just swapped the whole head with the old tub.
I love the special effects u earned a Oscar . So fun . 👍😂
33:02
Holy cow!!! Well, it went out....with a bang!!!
looks a little but like a motor from a henry aroud 2004
Yea same SaMe
Looks like a twinflo
Really enjoyed your disassembly Roger. I don't dare touch anything these days.
My grandmother use even iron from the 70s that had it had ripcord that was shown copper and everything.
Lo
Hi Roger. The misaligned speed control knob suggests that this lovely Miele has been previously tinkered with thus probably causing your spectacular blow out! “You were only meant to blow the doors off!” I would get a view from the mighty beko1987 before investing a lot of money on this one. He will know exactly what was the likely cause just from watching the video!
That also makes me suspect that something may be making contact that shouldn't. The alignment of that knob being off makes me thing the potentiometer (the actual electrical component it turns) is either loose or has been removed and not re-installed correctly. The latter technically isn't a problem, but it is also possible that the leads weren't dressed correctly on reassembly.
First! That bang. I think I need to get my ears fixed!
Thanks so much for this video, i was having trouble with my vacuum and this helped me pull mine apart and fix it
Miele goes tubby bye-byes!
Biggest bang poor Roger's had in a while :-)
That the motor ran makes me think it's the electronics that failed (speed adjustment PCB)
Sam!!!!
Wow, nice machine. Looks like new. I have the same machine in same condition. But be careful with the supressor, it blews up and the machine can be standing on fire!
Das war doch der Kodensator, oder???🤔
+its' vacuuming time
Ja, das war der Kondensator. Ich habe das mal bei unserem orangenen Miele S 224 genau so erlebt. War auch filmreif, hatte damals aber keine Kamera parat. 😉
@@vintageelectroappliancesandrad schade)))
That description end tho!
Wow what a pop! Appears to be a direct short circuit, could be cable or motor coil shorted out 🤔
🤪🤪 OH MY GOD!!! I even got a fright and i knew it was coming!!! 😂
LOL XD
Very good D
Sorry to ask this here but currently can’t find any of your American demos. I know American vacuums need the voltage stepped down, but do you do anything about the frequency as UK is 50hz and USA is 60hz.
I don’t think the frequency matters for vacuum cleaners. th-cam.com/play/PLL8RFLr8EcfTXpe0LXu9W6slQt7Ew2DcE.html
i think you should take it apart plug it in and power it on out side and see were the flames come from
roger your quality LOVE IT
Mee tooooo
I wonder if someone has tried to clean it out with break clean or something else combustable and nothing is broken
Always use a meter to test for a dead short between neutral and live, without power. Also use a LOW value fuse at first say 3 or 5A
It's probably a blown capacitor.
That classic miele is a Volcano! 🌋
Any updates Roger on finding the cause? If there was signs the filter had burnt and the suspect suppressor would have blown and not looking in the condition it does. Maybe the potentiometer burnt out but it seemed like there was a dead short somewhere down the line.
Hi Roger. What's the name of the intro music please.
Wow! I hope you and Daisy are alright!
The motor is fine. Your problem is with the pcb board. Circuitry this old coupled with the suppressor its more than likely your cause. You can direct wire the motor to confirm this.
Your last vacuum sound was as deep as a Rainbow D4. Do you guys have Rainbows in the UK?
Does the Hoover Celebrity QS have a suppressor?
If you want the model of it here it is S3199
28:47 “the moment you have been waiting for with a bang!!!”
(BANG!!!!)😂😂😂😂
It’s more likely is the suppressor/capacitor and it cannot be the motor?
Capacitor?
Did you ever put a new motor in it?
Even i just jumped out my seat watching that 🤣🤣🤯🤯🔥
A 1200w Henry motor might fit
Better think again on that
The motor is henry’ s hat!
will you throw away that miele vacuum or keep the vacuum
The last thing in the discription😂
33:02
I was trying to fix my Henry motor and wired it to something when I turned it on it was basicly a firework but it worked because the turbine started slowing down
Is your house blackout after test it?
That’s one well engineered vacuum cleaner shame it’s blown up hopefully you can get a replacement motor
O roger you are so funny you make my day love your videos . Good that you and daisy are ok xx : )
x_x
Oh no! How do you say “open heart surgery” in German? Hahaha! Glad you and Daisy are okay!
Offene Herzoperation ;)
33:02
Hi roger. How’s things. Did ever manage to get this fixed. I was wondering if there might have been a problem with the wiring from the cable rewind. Prob not though
Xx
Hello. No, not managed to fix it yet but I still have it.
What actually happened? I’m visually impaired so that is why am asking. Also was that motor a Miele one?
The motor turned on for a nano second, there was a big bang and yellow flames and sparks flew out of the exhaust vent on the top of the cleaner.
It also tripped the downstairs wiring circuit and my studio lights went off.
me too! legally blind
It's like that Electrolux explosion but worse! 💥
28:47 explosion
did you repair it
28:24and28:48and33:02
Dont u have a fuse in your house?.
28:47
Mac computer users turn down your brightness for the ENTIRE video!
It was edited on an iMac, so if there’s any problems with brightness it’s at your end.
Why did you do that
I think it is carbon brushes or supressor.
28:47 your scream ??
28:48 xD
Blimey that is scary. I have seen a lot worse. My mother's old Electrolux blow up and had spark flying left, right and centre. Your so lucky Rodger mate..
Miele S226 explosion
Well that was one heck of a failure, glad you and daisy are alright. Talk about getting bang for buck hey Roger lol ha ha ha ha 😂 😂🤣🤣
FANTASTIC !
IT WILL BLOW UP!
Bonjour a tous il s agit de shunter le condensateur et l aspirateur fonctionnera parfaitement bien
Ce modele est tres performant et tres robuste par contre il est bruyant et lourd
Bonne journee
Benjamin
Google translate:
Hello everyone it is to shunt the capacitor and the vacuum cleaner will work perfectly well
This model is very powerful and very robust, but it is noisy and heavy
Have a good day
@@ibaisaic excuse me m'y english is not my cup or tea translator is good have à good Day ciao
@@benjaminpoupard8374you need to learn English in the eu they talk in English
I think that's a air flow indicator
lol that's a dead short across the motor windings
Thanks for your explosion I almost wet myself
I did wet myself
When I first watched this video when I first ever watched yeah I didn’t know it was gonna bang but when I did that I just jumped in a heartbeat in two minutes😂😂😂😂😂😮😮😮😊😊😅😅😮😢🎉🎉🎉
Never use a cord that feels hot or is damaged in any way.
Nice vacuum. And nice motor burn out. But be careful. But I enjoyed the video.
28:47 Ba Bahhhh😂😂😂😂😂❤️❤️
Boom!
Im guessing you won’t be using it after all
things come in boxes everytime
Holy shite lad! Rest in peace Miela!
Remember remember the 26th of September 😂
The Laundry Centre miele fawkes night 😂😂😂
Roger literally got bang for his buck with this vacuum 😂😂🤣🤣
@@tomwheat1853 😂🤣
Thats funny
guitarplayerforu haha
I didn´t know John Lennon´s voice is still alive and speaking for a guy interested in vintage vacuums.
It was a nice miele.
Before it was blown up.
Roger, did you shit your pants when that went? I think I might have. Sad for the cleaner but that makes for good youtube.
No, I am not at the stage where I shit my pants, but possibly in 30 years I may.
ibaisaic can u do a bissell vacuum playlist like u did hoover and other vacuums
@@ibaisaic 😂😂😂😂 you have no damn chill
Hi Roger check the Brushes 😮
28:47 Lmfao 😂😂😂😂😂
i wish i read the top line of the description before my ear drums expanded.. 😂
Hope your okay roger:)
Dyson no explosion
I bet this miele made your hair stand on end. It was a bit noisy.
I don't have headphones
Good Lord. I'm glad that you're unhurt. I hope that in the future you'll try used vacuums initially outside.
super :D
To samý mi udělala ETA 400. Po zásahu letěl kondenzátor do rohu a běhá to bez něj :D
Give me exploding hoover at 21 East avenue
Vacuum angels! More like dirty Devils!!
Poor Roger, that machine is cursed👺
Boom
💥
Oh dear
smoke teeeeeeeeeest!
You must of got scared
Vorsprung-durch-technik........................................................................................... BANG!!!!!
You shouldn't have mentioned the explosion Roger it would have been a nice surprise for us.
psycho killers don't make any bombs in the cleaner
Rip motor
Yep need new motor mate